Flow: 20m3/h Head: 30m Power: 3kw Material: cast iron Medium: clean water Outlet dia: 60mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue QJ Submersible pumps Parameters: Flow range10~500m3/h, Lift scope within 5~405m; Caliber scope 32~203mm, Temperature range-15~80° C. Products Overview: QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation. Product use conditions: QJ Submersible pumps use conditions 1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply. 2. Electrical cavity must be filled with water. 3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m. 4. Electrical from the bottom of the bottom of the well shall be not less than 3 m. 5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C. 6. Water and sand content (by mass) of not more than 0.01%. 7. Water PH 6.5-8.5. 8. The hydrogen sulfide in water content is not more than 1.5 mg / L. Application : deep well water farm irrigation sprinkling irrigation urban and rural industry mine supply and drainage.
Flow: 20m3/h Head: 40m Power: 4kw Material: cast iron Medium: clean water Outlet dia: 60mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue QJ Submersible pumps Parameters: Flow range10~500m3/h, Lift scope within 5~405m; Caliber scope 32~203mm, Temperature range-15~80° C. Products Overview: QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation. Product use conditions: QJ Submersible pumps use conditions 1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply. 2. Electrical cavity must be filled with water. 3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m. 4. Electrical from the bottom of the bottom of the well shall be not less than 3 m. 5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C. 6. Water and sand content (by mass) of not more than 0.01%. 7. Water PH 6.5-8.5. 8. The hydrogen sulfide in water content is not more than 1.5 mg / L. Application : deep well water farm irrigation sprinkling irrigation urban and rural industry mine supply and drainage.
Flow: 20m3/h Head: 54m Power: 5.5kw Material: cast iron Medium: clean water Outlet dia: 60mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue QJ Submersible pumps Parameters: Flow range10~500m3/h, Lift scope within 5~405m; Caliber scope 32~203mm, Temperature range-15~80° C. Products Overview: QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation. Product use conditions: QJ Submersible pumps use conditions 1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply. 2. Electrical cavity must be filled with water. 3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m. 4. Electrical from the bottom of the bottom of the well shall be not less than 3 m. 5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C. 6. Water and sand content (by mass) of not more than 0.01%. 7. Water PH 6.5-8.5. 8. The hydrogen sulfide in water content is not more than 1.5 mg / L. Application : deep well water farm irrigation sprinkling irrigation urban and rural industry mine supply and drainage.
Sqj submersible pumps parameters: Flow range10~500m3/h, lift scope within 5~405m; Caliber scope 32~203mm, temperature range-15~80° c. Products overview Sqj series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation. Product use conditions 1. Sqj submersible pumps use conditions: (1)380 v bias voltage does not exceed +/-10% and 50 hz frequency, and the deviation is not more than + -1% of the three-phase power supply. (2) Electrical cavity must be filled with water during operation. (3)the first-class pump impeller should at least go into a dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m in depth. (4)the normal water temperature should be no higher than 20 ° c, qjr- hot water pump temperature up to 80 ° c. (5)water and sand content (by mass) of not more than 0.01%. (6)water ph 6.5-8.5. (7)the hydrogen sulfide in water content is not more than 1.5 mg / l.
Products overview Sqj, sqs, sqy, series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation. Product use conditions: 1.380 v bias voltage does not exceed +/-10% and 50 hz frequency, and the deviation is not more than + -1% of the three-phase power supply. 2.Electrical cavity must be filled with water during operation. 3.The first-class pump impeller should at least go into a dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m in depth. 4.The normal water temperature should be no higher than 20 ° c, qjr- hot water pump temperature up to 80 ° c. 5.Water and sand content (by mass) of not more than 0.01%. 6.Water ph 6.5-8.5. 7.The hydrogen sulfide in water content is not more than 1.5 mg / l.
Cast iron or stanless steel blue qy oil immersed submersible pumps Qy oil immersed submersible pumps parameters: Flow range10~250m3/h, lift scope within 5~120m; Caliber scope 51~152mm, temperature range
Stainless steel submersible water well pump Submersible deep well pumps Sqj , sqs, sqy submersible pump series parameters Sqj submersible pumps parameters: Flow range10~500m3/h, lift scope within 5~405m; Caliber scope 32~203mm, temperature range-15~80° c. Sqs bearing submersible pumps parameters: Flow range10~250m3/h, lift scope within 5~12m; Caliber scope 30~150mm, temperature range
Qjr hot water submersible pump Flow: 10~500m3/h Lift: 15~405m Caliber: ?175~?400mm Power: 0.4-160kw Temperature: =140 ? Qualitycertificate: one year warranty and lifelong maintenance Qjr submersible hot water pump overview: This machine is used to deliver water. It has submersible motor and works under water. It is mainly used for farmland irrigation, water supply and water drainage in cities, factories and mines. Qjr series spring pump is widely used in special occasions like heating for warmth, physiotherapy, health care, earth energy utilization, etc. Its motor and pump are united into one. Its structure is simple, easy to install and disassemble, taking little floor space. It is easy to use and maintain, works safely and reliably, causing no pollution to water source. Qjr submersible hot water pump application range: 1. To collect hot water from boilers for secondary use 2. To collect water that leaks from heating pipelines in winter for secondary use 3. To collect cooling water in factories for secondary use (the pump should be submerged in water when working) 4. To deliver high temperature water through heat-supply system 5. To be used for heat-supply equipment maintenance 6. To supply hot water for bath center 7. To draw water from underground hotsprings, etc.
Wq series submersible sewage pump is mainly used for municipal works, industry bulidings, hotels, hospitals, civil air defence, mines etc. Trade to drain off the sewage, waste water, rainwater and living water in cities containing solid grains and various fabrics. Service conditions: 1.Based on impellers as center, underwater depth doesn’t exceed 5m, 2. Transferred medium temperature doesn’t exceed 40? 3. Ph: 4-10, it can not transfer liquid with high corrosivity 4. Max density: 1200kg/m3 5. Wq series pumps are submersible pumps. The motor must run under the water. Wq series pump incude 9 series as follow: 1. Wq submersible sewage pump 2. Wq(o type) submersible sewage pump 3. Wq non-blocking submersible sewage pump 4. Wqs water-filled submersible sewage pump 5. Wqx bottom suction type submersible sewage pump 6. Wqk cutting type submersible sewage pump 7. Wqjy automatic mixed type submersible sewage pump 8. Wqx big flow quantity type submersible sewage pump for mining engineering 9. Wqd/wq whole stainless steel sewage pump
Os series single-stage double-suction split volute centrifugal pump Os axially split pump overview: Model os pumps are single-stage double-suction inter opened spiral casing centrifugal pumps.It is used to water transportation in water plants, air conditioning water circulation, building water supply, irrigation, drainage pump station, electric power station, industrial water supply system, fire-fighting system, and shipbuilding and so on. Os axially split pump material: Pump casing:casting pig, ductalloy, cast steel; Impeller: bronze, casting pig, silicon brass, stainless steel; Shaft: stainless steel, carbon steel; Seal-ring on pump casing:bronze, casting pig, silicon brass, stainless steel. Os axially split pump feature: 1. It has compact structure, nice appearance, good stability and it is easy to install; 2. The optimally designed and stable running double-suction impeller makes the axial force reduced to the minimum and it has a blade-style of excellent hydraulic performance. Both internal surface of the of the pump casing and the impeller's surface are extremely smooth after being precisely cast.They have a notable performance on ovapour-corrosion resisting and a high efficiency. 3.Bearing use skf and nsf bearings to guarantee a stable running, low noise ande long duration. 4.Shaft seal use burgmann mechanical or stuffing seal to ensure a 8000h non-leak running. 5.Installation does not need to adjust when assembly and it can be vertically or horizontally assembled upon the conditions of use on the spot.
Vertical and horizontal type blue cast iron or stainless steel submersible pipeline pump This series pump that are suitable for environmental requirements quiet place, at the same time, we can provide hot water pump, chemical pump, explosion-proof oil pump, explosion-proof chemical pump and so on many kinds of types. The pipeline pump series include 4 series: 1. Slgd low speed vertical pipeline booster pump 2. Slwd low speed horizontal pipeline booster pump 3. Slg vertical pipleline booster pump 4. Slw horizontal pipeline booster pump. Pipeline pump working conditions: 1. Pump pressure of system work less than 1.6mpa, namely the pressure of suction inlet plus the head of pump less than 1.6mpa, when ordering, please indicate the system work pressure. When the import pressure is greater than 0.4mpa, or pump system work pressure is greater than 1.6mpa, shall be told us when you place the order, so that in the manufacturing, pump flow part and connections have made of copper materials. 2. Applicable medium: pure water without corrosive liquid, medium solid not content, volume not more than the unit volume 0.01%, particle size
D type cast iron and ss multistage boiler feeding pump and clean water pump D type multistage boiler feeding pump overview: It is widely applied to supply water of low or high pressure boiler. It is also used for high pressure water supply and drainage of industrial and urban. The temperature of medium delivered should be in the range of -20°c to 150°c and the water pump inlet pressure should be less than 0.6m pa. Product feature: 1. About d model pumps, inlet and exit are both vertically upward. The inlet section, middle section, discharge section and bearing body of pump are connected into one by tightening bolt. Customer can decide the pump stage according to pump head. 2. The rotor part of pump is composed of axis, impeller, shaft sleeve and balance disk, etc. The quantity of impeller is decided by the stage quantity of pump. The components of axis are connected by flat key and spindle nuts. The whole rotor is supported by antifriction bearing or sliding bearing. Balance disc bears axial force instead of bearing. When pump is running, the rotor can move in the same axial direction. Annular ball bearing can not be used about this series of pumps. They are adopted antifriction bearing. Antifriction bearing is lubricated by grease and sliding bearing is lubricated by thin oil. In addition, they can lubricate themselves by oil ring and cool themselves by circulation water. D type pump Dg boiler feeding pump
Ih single stage single suction chemical centrifugal pump Working parameters: Flow range:6.3m3~400m3/h Head range:2~125m Operation temperature:-20-280 Matched power: 0.19~94.56 Working pressure: =1.6mpa Diameter range: dn50~dn200mm Speed: 1450, 2900r/min Overview: The ih series are newly designed single-stage, single suction and cantilever centrifugal pumps. It is designed according to the international standard iso2858 and manufactured according to the international standard iso5199/dis. Comparing the design guide line with old products, the efficiency is advanced about 5% and the steam corrosion quantity lowered about 2m. Features A) economy high efficiency product; B) stable capability and standard components C) stainless steel material contain 304, 316l, cd-4mcu, 904, 904l D) kazak alloys density scope is p=1.0~1.84×103kg/m3 Product use: It is mainly used in chemical, oil, petrochemical industry, metallurgy, light industry, printing dyeing, pharmaceutics, environment protect, seawater desalt, paper making, food and etc .Industrial departments to transport corrosive medium without suspended grain or medium. Model meaning : Ex: ih 80-65-160a Ih: accordance with the international standard of chemical pump 80: suction diameter (mm) 65: outlet diameter (mm) 160: name impeller in diameter(mm) A : impeller with the first cut
Self-priming pump CBH-80 and its units (hereinafter referred to as pumps or units) are designed to pump liquids without mechanical impurities. Pump CBH-80 is designed to pump the following liquids: water, gasoline, kerosene, diesel fuel and other liquids with a viscosity of not more than 2 10-6m2/s at a temperature from -40 to +50 and a density of not more than 1000 kg/m3. Symbol of a pump or electric pump unit: C self-priming H-pump 80- DN inlet and outlet pipe, mm Specifications of Pump CBH-80 The main technical characteristics of the pump are shown in Fig . 1 and in Table 1 at testing it on water at a temperature of 20 C and a rotational speed of 1450 rpm.
AHCB-2 series oil pump belongs to inside sealed slip blade self-priming pump. Applications of AHCB-2 series Oil Pump This series pump can be widely used in oil storage depots, gas stations, railways, docks and other oil loading and unloading operations. It can transport gasoline, diesel, kerosene, methanol, ethanol and other oil products and liquid raw materials. Explosion-proof flexible vane pump, in addition to the above performance, due to the continuous reciprocating elastic working principle structure of the vanes in the pump chamber (the vanes are made of special rubber materials), which makes it oil-resistant, corrosion-resistant, wear-resistant and flex-resistant. Therefore, these pumps are more suitable for use as oil tanks, oil tank trucks, oil tanks and other occasions, cleaning the bottom oil, cleaning up oily garbage, has more superior performance, and has significant work efficiency and economic benefits.
Head: 26m Flow: 32m3/h Power: 4kw Efficiency: 73% Speed: 2850r/min
What we present to you is a liquid nitrogen container designed for laboratory sample storage. It is made of special aviation aluminum material. It not only has a low liquid nitrogen volatility rate, but also has the advantages of lightweight and space saving. It is suitable for efficient storage of large-capacity samples. Whether you are a scientific researcher or an industrial user, our laboratory liquid nitrogen tank can meet your different needs. Product Features: Large capacity selection: A variety of volume options from 30 liters to 175 liters, which can accommodate 750 to 6000 2ml or 540 to 1800 5ml cryotubes. High efficiency and energy saving: The high-strength and lightweight aluminum structure is combined with a multi-layer insulation vacuum design to effectively reduce thermal radiation and liquid nitrogen loss. Friendly operation: The large-caliber design facilitates sample placement and removal, and the high-strength neck tube design further reduces liquid nitrogen consumption. Safety guarantee: The optional safety lock and the vacuum warranty period of up to five years make you feel more at ease when storing samples. Intelligent management: The laboratory liquid nitrogen tank supports the optional intelligent monitoring system to realize remote monitoring function and keep track of the status of the tank at any time. Liquid nitrogen automatic transfer solution: In order to facilitate the transfer of liquid nitrogen, we provide two types of liquid nitrogen automatic transfer pumps for you to choose from: foot-operated (TCLNP-50) and mechanical (TCLNP-50A). Both are made of stainless steel pump body, with exquisite appearance, durable and easy to use, suitable for 50mm caliber liquid nitrogen tanks. Among them, the foot-operated liquid nitrogen pump is also equipped with a hand-pump and double thickened cylinders, making liquid nitrogen transfer easy and labor-saving; the mechanical liquid nitrogen pump has a normal version and a version with wireless remote control to choose from, and the one-button power on and off design makes the operation easier. Choosing our laboratory liquid nitrogen tanks and supporting equipment will bring more convenience and efficiency to your scientific research work.
Livestock liquid nitrogen tank, as a low-temperature container, is usually used to store animal semen. During storage, liquid nitrogen is used as the refrigeration medium. However, the temperature of liquid nitrogen is -196C, and its volatile nature is its constant attribute. Therefore, when the staff opens the liquid nitrogen tank to take out the frozen semen, the contact heat increases as the residence time increases. The sample placed in the bucket will be exposed to part of the normal temperature after being taken out, and the temperature will gradually rise. If it is placed in the liquid nitrogen tank again, the volatilization of liquid nitrogen will also be accelerated. However, the loss of frozen semen is normal. Frequent users know that we only need to replenish liquid nitrogen in time to ensure the safety of frozen semen in livestock liquid nitrogen tanks. When it comes to rehydration, there are many ways to replenish liquid nitrogen, including pouring it directly yourself, or using tools such as liquid nitrogen pumps and liquid nitrogen supply tanks. Among them, liquid nitrogen pump is a common and practical "liquid replenishment artifact". It is divided into two types: foot pump and automatic pump; their pump bodies are made of stainless steel, which are easy to operate, beautiful and durable. How to use liquid nitrogen pump: 1. Close the liquid nitrogen pumpâ??s liquid outlet valve; 2. Insert the liquid inlet of the liquid nitrogen pump into the neck of the jar and turn it clockwise until it is tight; 3. Also insert the liquid nitrogen pump outlet into the tank, and seal the liquid nitrogen pump and neck tube with a sealing ring; 4. If it is a foot pump, you can control the liquid discharge by simply stepping on it; if it is an electric pump, you can control the discharge of liquid nitrogen through the mobile phone APP. Generally speaking, the foot pump has a liquid output of about 5L per minute, and the mechanical pump has a liquid output of about 8L per minute. Note: Whether it is a foot-operated or mechanical liquid nitrogen pump, the diameter of the tank is required to be 50mm and the volume is greater than or equal to 10L. Liquid nitrogen tanks that do not meet the conditions cannot be used.
Circulating water multipurpose vacuum pump is the device with circulating water as working fluid, and it adopts jet technology to create negative pressure. According to the appearance, it is divided into desktop type and vertical type ( vertical type has larger capacity relatively). Desktop type is divided into anti-corrosion type and stainless steel type, according to motor material. Transparent tank vacuum pump is available.
Vacuum pumps, rotary vane vacuum pump, biogas vacuum pump, water ring vacuum pump, liquid ring vacuum pump.
