sic element is a kind of non-metal high temperature electric celement. It is made of selected super quality green silicon carbide as main material, which is made into blank,silicided under high temperature and re-crystallized. Compared with metal electric heating element ,this kind of element is characterized by high-applied temperature, anti-oxidization, anti-corrosion, long service life ,little deformation ,easy installation and maintenance. Therefore, it is widely used in varilus high temperature electric furnaces and other electric heating devices ,such as in the industries of magnet, ceramics ,powder metallurgy, glass ,metallurgy and machinery,etc
Micro flame generator, also named oxyhydrogen flame polisher and polishing machine, is a portable gas generator producing mixed oxygen and hydrogen gases cheaply from distilled water.The mixes gases can not only give an extremely hot flame with temperature up to 2800 degree centigrade from pen size torches, but one which is sufficiently clean to ensure that the work piece is not contaminated.No gas storage, safe and reliable. This unit is supplied with 1 hand torch and four different torch tips. Micro flame generator uses low voltage electricity to dissociate distilled water into mixed hydrogen and oxygen gases which is mainly used in polishing and welding. Model:105t Gas output: 100 liter/hour Water consumption: 30 milliliter/hour Power rating: 300 watt/hour Power supply: 110v-240v;50hz-60hz Weight:14kg Size: 44cm*31cm*54cm Lower daily running cost- only water and electricity Size: 44cm*31cm*54cm Weight: 14kg -
Tank feeding bulk powder Tank Loading Mass Flow Meter realizes quantitative and accurate loading and one-button operation of powdered bulk materials, greatly improves loading efficiency, saving labor costs and improves working environment. At the same time, combining with other intelligent automation devices, the bulk powder process is fully automated, which is a new type of environmentally-friendly quantitative loading equipment. Applicable: cement, fly ash, mineral powder, alumina powder, calcium carbide powder, etc. Accuracy: ±1.0%; Flow rate: 250~800m³/h Product Features 1. Like a gas station, loading as required quantity; 2. One button to start loading automatically; 3. Since the release process is automatic and stable, accurate loading, the equipment can protect the environment and improve the working condition; 4. Height of 700mm is enough for installation, and the modification period is as short as 1-2 days; 5. It can be connected to Fengbo intelligent cloud service platform to realize early diagnosis, early warning, remote guidance and rapid maintenance. There are more than 300 successful applications and a thousand sets are installed in the cement, power, and metallurgy industry.
Copper meter machine.
Coriolis mass flow meters , coriolis weigh feeder of raw meal; coriolis weigh feeder for feeding powdered materials and meal; coriolis mass flow meter for feeding of coal dust.
Generator, silent generator, trailer generator, marine generator, diesel generator, diesel generator set, diesel genset, power generator, cummins generator, perkins generator, volvo generator, deutz generator, doosan generator, zhengdian generator.Before-sale Service:We provide detailed product technical parameters for equipment choosing and system designing Service quality assurance:Our sale staffs are all experience and professional,who can provide the most proper system design and optimized equipment for the customers. During the production, we will inform the customer of the production stage of the goods in time by email. After sale maintenance service:We create files for end user and provide them follow-up service,regular return visit and permanent maintenance. Spare parts supply:We provide all kinds of spare parts and technical support.
Cathlab 9000, Cardio catheter workstation, Radio frequency ablation generator, 12 Channel ECG.
Gas Meters, Flow Meters.
Busbar, cable lug, substation transmission connectors.
Transformer.
Commercial microwave oven, microwave magnetrons, microwave transformers, microwave switch power supply, capacitor, diode.
HVDC transformers are key components of HVDC stations. HVDC converter and inverter stations terminate long-distance DC transmission lines or DC sea cables. This type of transformer provides the interface between AC grids and high power rectifiers and are used to control the load flow over the DC transmission lines. These actors adapt the AC grid voltage to an adequate level which is suitable for feeding the valve system of DC converter and inverter. Design options The design concept of HVDC transformers is mainly influenced by the rated voltage, rated power and transportation requirements like dimensions, weight and mode of transportation. Many large power HVDC converter station are located in rural areas of low infrastructure. Frequently, special geometrical profiles have to be fulfilled in order to move such transformers by railway. Typically, HVDC transformers are single phase units containing 2 winding limbs. This concept can include either 2 parallel valve windings (two for delta or two for wye system, fig. 5.8-1) or two different valve windings. In order to reduce the total transportation height frequently the core assembly includes 2 return limbs. Due to redundancy requirements in HVDC stations 3 phase units are quite uncommon. The valve windings are exposed to AC and DC dielectric stress and therefore a special insulation assembly is necessary. Furthermore, special lead systems connecting the turrets and windings have to be installed in order to withstand the DC voltage of rectifier. Additionally, the load current contains harmonic components of considerable energy resulting in highe r losses and increased noise. Above all, special bushings are necessary for the valve side to access upper and lower winding terminals of each system from outside. Conclusively, two identical bushings are installed for star or delta system. For approving the proper design and quality of manufacturing special applied DC and DC polarity reversal tests have to be carried out. The test bay has to be equipped with DC test apparatus accordingly and needs to provide adequate geometry to withstand the DC test voltage. HVDC Transformers react as coupling elements between the connected AC grids and high power rectifiers, and are necessary for adapting the voltage. They insulate the rectifier itself from the AC grid and generate a phase shift. New HVDC applications are seen between existing, well-established networks. A back-to-back link can easily combine two different AC networks together, even with different frequencies. Such solutions can also help customers to strengthen and optimize their networks. The changing environment provides more and more opportunities to HVDC solutions, and Siemens is prepared to provide its customers with either our solution or with converter transformers as a loose component .
Ph Meter, Tds Meter, Orp Meter, Moisture Meter, Etc.
Monocrystalline & polycrystalline solar panel, battery, controller, connector.
Electrical laminated wood is mainly used for transformers; it is also the insulation material and support material of mutual inductor. Besides, it can be used to make winding clamping plate, iron core plate, trapezoidal plate and clamping device. And it has many advantages, such as proper specific weight, high mechanical strength, good compatibility with transformer oil and easy machining. In addition, its dielectric constant is close to that of transformer oil and the insulation coordination between them is proper. It can be used in transformer oil under 105â?? for a long time. Electrical laminated wood sheet is widely used in manufacturing some devices for oil-filled transformer, such as upper and lower pressure plate, lead bracket and iron yoke cushion block. And it is used to make clamping device in mutual inductor. It can replace steel plate, insulation paper board, epoxy paper board and epoxy fiberglass board, which can lower the weight of the transformer and the cost of materials. It has been recognized to GB/T20634 or IEC61061.
Product Description Type: Dry Type Transformer Model Number: SC(B)10-30~2500/35 Phase: Three Rated High Voltage: 10(11, 10.5, 6.6, 6.3, 6 )KV Rated Low Voltage: 10KV, 0.4KV or as required Rated Capacity: 30~2500KVA Our dry type transformers are in conformity with the following standards: 1. National Standard of China GB1904.11-2007Power Transformers 2. International Electro Technical Commission Standards IEC 60076-112004 Dry Type Transformers 3. German Industry Standard DIN EN 60076-11:2005 Dry Type Transformers
Products include automatic tank gauge system for fuel station and oil depot, fuel dispenser, flow meter, gear pump and other parts of fuel dispenser, automatic tank gauge system .Export
Magnetic flap level gauge, magnetostrictive level gauge, guided wave radar level meter, pulse radar level gauge, electric float level gauge, ultrasonic level meter, float level switch, magnetically coupled level switches, fork liquid level switch, rf admittance switch, integrated measurement system, spare parts.
Wall switches, wall sockets, socket mobile, up socket on the floor.Transportation and shipping
Steel cord for radial tire, hose wire, ultra fine wire, galvanized steel wire & strand, alloy coated steel wire & steel strand, PC steel strand.Clearing agent , transportation , shipping
