QDY bridge foundry crane with hook is mainly used at the place where the molten metal is liftedThe working class of the complete machine is A7,and thermalprotective coating is added at the bottom of the main girderThe assembling and test of the crane conform to the document No.ZJBT[2007]375 which was issued by General Administration of Quality Supervision,Inspection and Quarantine of the PeopleS Republic of ChinaThe place where molten nonmetal material and red-hot solid metal is lifted also can refer to this document
It is known that swaying is a big problem for safety and efficiency operation of overhead cranes and gantry cranes. To this end, Yuntian develop advanced crane anti-swing control system for the cranes through the establishment of the precise load swing movement mathematical model. This anti-swaying system of cranes controls the traveling speeds of the crane and trolley to eliminate load swing by 95%.
Casting Crane is one of the main equipments in the continuous casting technology of steelmaking. It is mainly used for pouring melted iron from additive bay of converter to converter; lifting molten steel from refining bay to refining furnace or lifting molten steel from molten steel bay to ladle turret of continuous casting machine.
LDA Sinlge Girder Overhead Crane is widely used in plants warehouses, material stocks to lift goods. It is prohibited to use the equipment in the combustible, explosive or corrosives environment. LDA Sinlge Girder Overhead Crane has two operational methods, ground or operational room which has open model and closed model and can be installed on left or right side according to the practical situation. And the direction of entering the gate has two forms, sideway and ends in order to satisfy the users' Choice users' different conditions.
Single girder cranes are a type of overhead crane that are common in production, engineering and many other workplaces as they cater to practically any lifting application.
Single girder overhead cranes get their name from the fact that they utilise just one beam, as opposed to two. As such, they are typically designed to carry lighter loads than double girder models.
LDA Type1-5T Overhead Mobile Hoist Crane is ameliorated and designed on the basis of LD type single beam overhead crane. The hoisting mechanism is the hoist which is running at the I-steel under the main girder. The obvious feature is an ingenious structure and easy to maintain. It is used CD/MD model electric hoist as a lifting mechanism.
ingle Girder overhead crane has the advantages of rational structure and strong rigidness of whole unit which will be used together with electric hoist in the operation. They are applicable to the transfer assembly, check and repair as well as load and unload at mechanic processing workshop, subsidiary workshop of metallurgical mills, warehouse, goods yard and power station. They can also be used instead of common double-girder overhead crane at production workshop in light textiles or food industry.
Heavy Duty QD double girder bridge travelling crane are mainly consists of Girder frame, Crane travelling device, trolley as the lifting device and electrical parts, it is divided into 2 working grade of A5 and A6 according to the use frequency. Bridge adopts box welded structure, high degree of vertical and horizontal rigidity; crane travelling mechanism adopts separate drive. It has a strong beam and a stable travelling mechanism; the emergency switch can stop any movement once any dangerous happened.
Rail mounted container gantry crane (RMG crane) is mainly used to load, unload, move and stack containers in railway transship fields and large container storage yards.
This double girder overhead crane with electric hoist is for lifting 5t~50t stuff. It's very convenient to install in new or existing workshops. This crane is easy to operate with various functions. With the advantages of compact structure, light weight and high lifting height, double girder overhead crane with electric hoist is widely used in workshops, metallurgy, warehouses and assembly shops etc. Weihua double girder overhead crane with electric hoist has beautiful box-typed welded main girders. Computer optimized design for main girders with good performance and light weight. And the span reaches 40 meters.
Double Girder Overhead Crane with Electromagnet is a specialized crane for lifting and moving steel products, steel plates and steel pipes. This crane is constituted by girder, traveling mechanisms, lifting trolley, electric parts and electromagnet spreader. The electromagnetic suction force of this overhead crane can last 10 minutes after power off. And the shape of electromagnet spreader could be customized bases on the shape of materials to be lifted.
Low Headroom Single Girder Bridge Crane is composed of girder weld by steel plate and I-steel, end girder, electric hoist and travelling mechanism. The electric hoist runs along the lower flange of the I-steel of the girder to accomplish article hoisting. It features light structure and easy installation and maintenance, and is widely used for different places for hoisting, such as factories, warehouses and material yards. It is prohibited to use in the environment with inflammable, explosive and corrosive media. Low Headroom Single Girder Bridge Crane is designed for low headroom workshop. The difference between them is the way of electric hoist running. The electric hoist of Low Headroom Single Girder Bridge Crane is running at the bottom flange plate of girder and the electric of Single Girder Bridge Crane is running at one side of the girder, which increase the work space of the hook and reduces the workshop height and cost. If your workshop is narrow or not high enough, choose this kind of crane!
SL model manual drive bridge crane is single girder manual overhead crane, the all motions are drive by hand, it is used in the place that no power source. This bridge crane is characterized by more reasonable structure and higher strength steel as a whole, the main beam is made by I-beam or box frame steel beam, the end carriages are made by C-section beam. This bridge crane is used together with chain hoist as a complete set. The capacity from 1 ton to 10 tons. The span from 5m to 14m, the working grade is A1-A3. Working temperature within -25 to +42 centigrade. This bridge crane is prohibited to use in the combustible, explosive to corrosives environment.
single girder travelling crane is our flexible crane for almost any application. Even in buildings with low ceilings effective material flow solutions can be achieved for loads of up to 30 t and spans of up to 39 m.
single girder travelling cranes adapt to different building applications due to their various main girder connection variants. Favourable crane dimensions help to reach optimal highest hook positions.
QE Model double trolley overhead crane is suitable to lift long materials(wood, paper tube, pipe and bar) in workshops or outdoors to store in factory and mines. The two trolley could work separately and at the same time. QE double girder overhead crane are mainly consists of Girder frame, Crane travelling device, two lifting trolley and electrical parts. Bridge adopts box welded structure, high degree of vertical and horizontal rigidity; crane travelling mechanism adopts separate drive. It has a strong beam and a stable travelling mechanism; the emergency switch can stop any movement once any dangerous happened. It is rely on the bridge frame along the workshop rail direction moving longitudinal, the trolley along the main beam direction moving transverse and the hook lifting movement to work. It is an excellent choice where high speeds and heavy service are required. As the widely used hoisting machinery currently especially is suitable for working at warehouses and freight yard and other department it is prohibited to use the equipment in the combustible, explosive or corrosives environment.
Four Girder Casting Crane Four Girder Casting Crane Description YZS model 125/32-320/80ton four girders casting crane is mainly used for for conveying, pouring and hot metal charging of liquid metal in smelting process in cast house, foundry shop, steel mill, smelting workshop etc.
LDY metallurgical single girder overhead cranes is used for lifting of melting metal sites of metallurgy, casting, its matching lifting mechanism is YH metallurgy electric hoist, the weight is less than 10 t. The bottom of main beam using special insulated heat . Working ambient temperature is -20- 60, humidity no more than 50%. Crane design and manufacture meet the State administration of quality supervision, inspection and quarantine of the quality of writing "2007" document No. 375, lifting other molten metal items and lifting hot solid metal location can also refer to the selection.
Overhead Crane,EOT Crane,Bridge Crane,Hoist Crane,hd type european hoist electric single-girder overhead crane, China, manufacturers, suppliers, factory,low price
