Specialty chemicals.
Laboratory Hot Plate With N ylon+GF Work Plate Material
Product Name: Glycidyl Methacrylate (gma) CAS: 106-91-2 MF: C7H10O3 MW: 142.15 EINECS: 203-441-9 Usage: Mainly used in powder coating, thermosetting coating, fiber treatment agent, adhesive, antistatic agent, vinyl chloride stabilizer, rubber and resin modifier, ion exchange resin and adhesive for printing ink.
Product Name: Phosphorous Acid Molecular Formula: H3PO3 UN No.: 2834 Molecular Weight: 82.00 CAS No.:13598-36-1 or 10294-56-1 Usage: Phosphorous acid is mainly used in the production of phosphates, synthetic fibers and organ phosphorus pesticides, etc. It is also used in producing high performance water treating agent ATMP. Package: 25kg, 500kg or 1000kg woven bag for phosphorous acid crystal; 280kg/HDPE drum, 1400kg/IBC for phosphorous acid solution.
Properties: The product is a white powder, density: 2.498g/cm-3,able to flow freely, melting point (decomposition temperature)£º350¡£C £¬slightly soluble in water and hot alcohol. Uses: It' s used in the preparation of fluxes required by metal processing industries, for metal surface treatment, and in the manufacture of aluminum£¬titanium and boron alloys. It's also used as a component for the fabrication fiber, and an creodont for the removal of exposed lead circurt board. Packing£ºIn polyethylene bag woven plastic sack, 250kgs or 100kgs net each.
ASTM E595-15 Outgassing test - Test Standard ASTM E595 Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment ASTM E595-15 Outgassing test - Test Requirement CVCM collected volatile condensable materials 0.1% TML total mass loss 1% WVR the amount of water vapor regained Outgassing test ASTM E595 - Test Conditions Pre Condition: 73 F/ 50% RH (24Hours) ; Post Condition: 73 F/ 50% RH (24Hours) This test method describes the test apparatus and related operating procedures for evaluating the mass loss of materials being subjected to 125 C at less than 7*103 Pa for 24 h. The overall mass loss can be classified into noncondensables and condensables. The latter are characterized herein as being capable of condensing on a collector at a temperature of 25 C. ASTM E595-15 Outgassing test Brief Many types of organic, polymeric, and inorganic materials can be tested. These include polymer potting compounds,foams, elastomers, films, tapes, insulations, shrink tubings, adhesives, coatings, fabrics, tie cords, and lubricants. The materials may be tested in the as-received condition or prepared for test by various curing specifications. More about Outgassing test ASTM E595,please contact us :
Place of Origin: Fujian, China Brand Name: Uwater (OEM acceptable) Model Number: ULS002-1 Product name: personal Water Filter Straw of camping Material: Disruptor Function: Remove Virus, Bacteria, Spore Filtration Efficiency: 99.9999% Use: Water Purifiers Heat-resistance: 0�°C to 60�°C Application: Life straw Certificate: LFGB, BPA free, EN71 Size: OD 30 mm Color: customization
GB 8410(Chinese Standard) Flammability Test to Motor Vehicle CASfire Technical Co.,Ltd have rich experience to provide GB8 410 Flammability of automotive interior materials. GB8410 Scope This Standard specifies the technical requirements and test methods for the horizontal flammability of automotive interior materials. This Standard applies to the assessment of automotive interior materials. As automotive interior parts (positions, layout and application conditions of the parts, ignition sources, etc.) differ considerably from the test conditions specified in this Standard, this Standard does not apply to the assessment of all the actual flammability of automotive interior materials. GB8410 Technical requirementsï¼? The flammability of interior materials must meet the following technical requirement: The burning rate is not greater than 100 mm/min. GB 8410 Test methodï¼? Fit the sample horizontally on a U-shaped support then ignite the free end of the sample on a flame of the specified height in the combustion box. 15 seconds later, determine whether the flame on the sample goes out or at what time it goes out, the burnt distance of the sample, and the time used in burning this distance. GB 8410 - Relative Standard FMVSS 302 Flammability of Interior materials SAE J369: Flammability of Polymeric Interior Materials Horizontal Test Method TL1010: Flammability ISO 3795:Road vehicles, and tractors and machinery for agriculture and forestry -- Determination of burning behaviour of interior materials DIN 75200:Determination of burning behaviour of interior materials in motor vehicles 95/28/EC: The burning behaviour of materials used in the interior construction of certain categories of motor vehiclesâ??, and is intended to ensure that they meet fire safety standards NF P 92-505: Safety against fire - Building materials - Reaction to fire tests - Test used for thermal melting materials - Dripping test. U.T.A.C 18-502 T1: burning behaviour of materials used in the interior construction of certain categories of motor vehicles BMW N 60121.0: BMW standard DBL 5307: Benz Standard GM L-T06-302G-79: GE Standard Mitsubishi ES-X60410: Oxygen Index VW TL 1010: burning behaviour Volvo STD 5031: burning behaviour Web:http://www.casfire.cn E-mail:info@casfire.cn
- Standard TB/T 3237 Flame retardant technical specification of decorating materials for multiple unit train Test Method GB 2406 Oxygen index test UIC 564 Combustion test GB 8323 Smoke density test TB 3237 Part 4.4 Smoke toxicity test Reference Standard GB/T 2406.2 Plastics - Determination of Burning Behavior by Oxygen Index GB/T 10707 Rubber - Determination of the Burning GB/T 8323.2 Determination of Optical Density by a Single-chamber Test UIC 564-2 Regulations relating to fire protection
Aztreonam(CAS:78110-38-0)
Aziridine(CAS:151-56-4)
Azaperone(CAS:1649-18-9)
Aspartame(CAS:22839-47-0)
Asenapine(CAS:65576-45-6)
Asenapine(CAS:65576-45-6)
Ascomycin(CAS:11011-38-4)
Ascomycin(CAS:104987-12-4)
Arabinose(CAS:87-72-9)
Arabinose(CAS:87-72-9)
Aprotinin(CAS:9087-70-1)
