This instrument use high accuracy (1uA) leakage test and updated CT shielding technology. It is composed of special HV detector and HV insulation rod. It can wireless transmit testing data within distance of 30m. 1. The full realization of the zinc oxide arrester online uninterruptible power test. 2. The latest CT and shielding technology. 3. No lightning counter can test the zinc oxide arrester leakage current. 4. Completely solve the 6-10kV zinc oxide arrester test problems. 5 without climbing pole without wiring fast and accurate test. 6 can accurately detect the leakage current of 10uA. 7. Zinc oxide surge arresters or aging judgment online. 8. High-speed sampling frequency advanced digital signal processing technology anti-jamming performance high accuracy measurement results. 9. Optional configuration with battery especially suitable for power occasions. 10. Small size light weight easy to carry.
Product description The metal oxide arrester tester is used for the measurement and analysis of metal oxide arrester MOA leakage. It is mainly used for measuring the resistive current to analyze the degree of zinc oxide aging and damp. The field charged test shall conform to Electric Power Industry Standard of the People's DL474.5-92 Guide for Insulation Test on Site - Lightning Arrester Tests. The metal oxide arrester tester can be also used for factory and acceptance tests. Zinc oxide arrester tester Technical Indexes Range of reference voltage input peak 10V-200V Measurement range of full leakage current peak 100uA 10mA Measurement range of resistive current peak 100uA 10mA Measurement range of capacitive current peak 100uA 10mA Measurement range of angle 0-90 Power consumption 4W System measurement accuracy reading 5 5 words not more than 2m for harmonic current AC power supply AC 220V 10 50Hz 1 Precautions When measure the reference voltage from PT or the measuring end of the testing transformer, carefully check wiring to avoid the PT secondary or test voltage short circuit. Be careful not to wrongly connect the current and voltage sampling lines in the connecting process. In the laboratory experiment, the high voltage power supply cannot use the series excitation testing transformer.
Tungsten sheet
Card Making ,lamination
nonwoven disposable bed sheet with elastic on four corner Material: SBPP,SMS,PP+PE,PE,CPE Weight:20-50g/M2 Color: white,blue,green Size:80/60x210cm,90/70x210cm,110/90x210cm as requested Pkg:1pc/bag,10pcs/middle bag,100pcs/ctn GOODS MATERIAL WEIGHT SIZE/CM STYLE FEATURE BED COVER SBPP 20G,25G,30G,35G 80X200 with elastic on four corner Breathable SMS 20G,25G,30G,35G,40G 90X200 with elastic on two side waterproof PP+PE 30G,40G 110X210 with full elastic waterproof SPUNLACE 40G,50G,60G 120X220 as your custom style Soft and breathable Different size are available with different height of mattress Style: 1> bed cover with adjustable elastic on two side 2>bed cover with elastic on four corner 3>bed cover with full around elastic 4>bed cover with ties 5>Your customize designed is accepted Feature: Disposable, breathable, durable and comfortable Popular used in beauty salon and massage center, medical use CE and ISO13485 certificated Other Products MEDDOCARE Sell: 1. Cap: 1.1. Bouffant cap 1.2. Doctor cap:(surgical cap with tie/surgical cap with elastic) 1.3. Strip cap 1.4. Space cap 1.5. Peak cap 1.6. Round cap with fringe 1.7. Shower cap(PE) 2. Body wear: 2.1. PP/CPE Isolation gown :(With Knitted cuff/Elastic cuff) 2.2. Surgical gown:(Sterile/Non-sterile) 2.3. Lab coat:(PP/SMS) 2.4. Coverall: (PP/SMS/PP+PE) 2.5. Scrub suit:(PP/SMS) 2.6. Sauna suit:(PP/SMS) 2.7. Patient gown 2.8. Pants:(Man/Woman) 2.9. Brief:(Man/Woman) 3. Shoe cover/Boot Cover: 3.1. Non-woven shoe cover/boot cover 3.2. Non-shid shoe cover/boot cover 3.3. PE shoe cover/boot cover 3.4. CPE shoe cover/boot cover 4. Face mask: 4.1. Face mask with ear loops:(1ply/2ply/3ply/4ply) 4.2. Face mask with ties:(1ply/2ply/3ply/4ply) 4.3. Active carbon face mask:(3ply/4ply) 4.4. Face mask with eye shield:(3ply/4ply) 4.5. Dust mask:(120g/140g/160g/180g) 4.6. Paper mask:(1ply/2ply) 5. Other Main Products: 5.1. Gloves( HDPE/LDPE/CPE/TPE) 5.2. Apron:(Non-woven apron/PE apron) 5.3. Sleeve cover:(Non-woven sleeve cover/PE sleeve cover) 5.4. Bed cover/Bed Sheet 5.5. PE hair-cut cape 5.6. PE ear cover 5.7. PE raincoat/poncho 5.8. Wipe cloth/surgical dressing 5.9. Pillow case 5.10 Clear face mask
The base material of the PET separator is PET, that is, a layer of silicone oil is coated on the surface of the PET film to reduce the adhesion on the surface of the PET film and achieve the effect of release. Conventional thickness from 25um to 150um. There are hot and cold tear and matte surface, after anti-static and anti-scratch treatment, the product has good adsorption and fit. PET film has high temperature resistance, temperature resistance over 220 , and the elongation at break is generally about 30%.
Hemostasis, anti-infection, heat preservation, anti-adhesion; Inhibits scar growth factor,The gel provides a moist environment for the wound bed and facilitates healing process. High absorbency can be compared to the market leading brands, absorbs 20 times its own weight. Does not adhere to wound site, the dressing can be easily removed without pain or trauma; reduce pain with on hospital times, and easy to be peeled off .
1. It is the mixture of natural seaweed ,and has good biocompatibility. 2. Gel could be formed when the dressing absorbs exudates and blood,it could protect the would Area and promote the wound healing. 3. The dressing has excellent absorbency, it is soft and comfortable. 4. No adherence to the wound, it will protect the nerve terminals, reduce pain and easy to be peeled off. 5. Maceration of the skin around will not occur. 6. It is biologically degradable and environment-friendly.
No cytotoxicity, no irritation, no sensitivity, no sterility, no pigmentation; Good air permeability, easy to apply to the surface, fast adsorption, infection particles; Targeted and highly repair to wound cells.Reduces the death of normal cells; Unique black fiber pile;Fine texture;Soft, with the benefits: 1. Pure biological; 2. Have't melanin, prevent adhesion, promote healing and resist infection; 3. Promote rapid wound healing, anti-infection and strong adsorption; 4. To cover the use of "window" treatment without damage to the surface; 5. To solve the medical problem, both residual and infected.
(1)Physical effect patches relieves pain on arthritis, backache,tendonitis, muscle strains, sprains, bruises and cramps (2)Gel formulations, quick acting and long lasting (3)Easy to stick and peel off , don't strain skin and hairs (4)Hydrophilic polymer gel, safe and convenient, not allergic, no stimulation. Size :8*12cm, 9*12cm ,10*20cm Color :white. packing: 5pcs/bag,1bag/box,24boxes/carton also size, color and packing all can customize as request.
[Packing] 2pcs/bag, 2bags/box, 600boxes/carton, any customerize requirement is welcome. [Main ingredients] Menthol, ginger oil, daturaflower oil and adopting new polymer hydrophilic gel. [Applicable People] carsick, seasick and airsick people. [Indications] applicable to various dizziness and vomit caused by carsickness, ship sickness and plane sickness and it is not easy to fall off. D=2.5cm Color: light brown. Packing :2pcs/bag, 2bags/box, 600boxes/carton Any customerize requirement is welcome.
If you want to sample thin film ceramic substrates, you can consider choosing manufacturers based on the following factors: 1. Product quality: Choose manufacturers with good product quality to avoid unnecessary troubles caused by quality problems later on. You can refer to customer reviews, product certifications, industry reputation, etc. to evaluate the manufacturer. 2. Technology level: The manufacturer's technology level and technical strength are directly related to product quality. You can check the relevant qualifications of the manufacturer's production equipment, production processes, and technology, and visit their production line to understand their manufacturing processes. 3. Service experience: Excellent service can help customers solve problems, provide support, especially in communication, exchange, after-sales service, etc. You can learn about the manufacturer's service level through online customer service, phone service, email replies, etc. 4. Cost control: Cost is also a key factor to consider when choosing a manufacturer. You can compare quotes from multiple manufacturers, but also be careful not to sacrifice product quality and service by choosing a low-cost manufacturer.
PE release film does not have viscidity or slight viscidity contact with specific material under the limited conditions. It is a tangigle polyethylene film, using as separator films or release film for sticky substrates. The embossing reduces the contact surface between the film and the substrate, thereby trappign the air. This makes it easy to remove the film again.Normally in order to increase the release force of the film, then do plasma treatment to the film or coated with fluorine, to make it act out the light and stable release force to different organic pressure glue. According to different release film , the release force is different, the viscidity of release product glue is different , to adjust the release force, to make it have the light and stable release force during peeling.
PE Shrink film is usually used in the packaging of food ,beverage,asphalt tiles and large equipment or goods etc.Packaging with PE shrink film could largely reduce the cost of the package.Film with high strength could also protect the good during the transportation.We could print the product information or your Logo on the film. PE Heat shrink film is used for the sale and transportation of various products, and its main function is to stabilize, cover and protect the product. The shrink film must have high puncture resistance, good shrinkage and certain shrinkage stress.
Product Information: Construction film is a general-purpose poly film that is ideal as a drop cloth or vapor barrier. Construction Film can be protection from weather, dust and debris, or chemicals. PE films used in the construction industry play an important role in covering specific spaces and protecting valuable equipment and machinery. It can be used for protection against the elements, dust, dirt and dampness. XXW-N-PE: 4-30um Thickness, 0.5-8m Width, 80-240m Length, PE (New); XXW-O-PE: 4-30um Thickness, 0.5-8m Width, 80-240m Length, PE (Old); Product Advantages: Various widths and thicknesses of industrial packaging film, engineering construction film, Black plastic film, white plastic film, rain-proof film. Can be customized according to the size and specifications required by customers. 1.The polymer material in the concrete curing film is not easy to volatilize after absorbing water. It can effectively improve the firmness of concrete, reduce cracks and improve economic benefits. 2. High elasticity for packaging 3. Using new raw materials, better quality Warning: This plastic sheeting is not UV resistance treated and not recommended as outdoor covers. 1. Processing Customization Length, width, thickness, color, Logo can be customized 2. Heat insulation, high temperature resistance, antifreeze, not easy to age 3. High transparency, waterproof and moisturizing, not easy to break 4. Strict packaging, so that every roll of goods is brand new in your hands Raw Materials: High molecular polyethylene raw material, high strength, no peculiar smell, not easy to volatilize and rot, no impurities. long lasting. Scenes To Be Used: 1. Concrete moisture proof 2. Anti-dry cracking of buildings 3. Road Maintenance 4. Product Packaging
Product Description: Vacuum bag film is a high elongation, high strength, transparent film. This type of vacuum bag film has a higher tensile strength and not easily damaged during the operating process. A five-layer co-extruded type vacuum bag film, which has been widely recognized by the market and can provide greater security. Vacuum bag film has a higher tensile strength and elongation at break, the recommended maximum operating temperature is 150 Celsius, suitable for the vacuum infusion processing of unsaturated vinyl resin and epoxy resin etc., this type of bag film is widely used in the vacuum infusion molding process of wind energy structure, car industry, yacht industry and others. It is the best choice of the autoclave process at low temperature. Transparent and light yellow, so it is easier to observe the state of resin. High temperature resistant vacuum bag film, temperature resistance up to 230 Celsius, high tensile strength, It can be used in curing furnaces and autoclaves, has good barrier properties under high temperature and high pressure, and is suitable for vacuum bag technology of various resin systems. Product Specifications: CVF120: Polyester; 120 Celsius, 50/65/75m Thickness, 1200-14000mm Width; CVF150: Polyester; 150 Celsius, 50/65/75m Thickness, 1200-14000mm Width; CVF170: Polyester; 170 Celsius, 50/65/75m Thickness, 1200-14000mm Width; CVF200: PA; 200 Celsius, 50/65/75m Thickness, 1200-14000mm Width; CVF230: PA; 230 Celsius, 50/65/75m Thickness, 1200-14000mm Width; Product Features: Superior performance and wide application process conditions. High temperature resistance and high strength provide guarantee for higher quality parts forming. A variety of sizes are available, reducing process waste and reducing use costs. Scenes To Be Used: Vacuum infusion molding process of wind energy structure, car industry, yacht industry and others
nonwoven disposable bed sheet with elastic on four corner Material: SBPP,SMS,PP+PE,PE,CPE Weight:20-50g/M2 Color: white,blue,green Size:80/60x210cm,90/70x210cm,110/90x210cm as requested Pkg:1pc/bag,10pcs/middle bag,100pcs/ctn GOODS MATERIAL WEIGHT SIZE/CM STYLE FEATURE BED COVER SBPP 20G,25G,30G,35G 80X200 with elastic on four corner Breathable SMS 20G,25G,30G,35G,40G 90X200 with elastic on two side waterproof PP+PE 30G,40G 110X210 with full elastic waterproof SPUNLACE 40G,50G,60G 120X220 as your custom style Soft and breathable Different size are available with different height of mattress Style: 1> bed cover with adjustable elastic on two side 2>bed cover with elastic on four corner 3>bed cover with full around elastic 4>bed cover with ties 5>Your customize designed is accepted Feature: Disposable, breathable, durable and comfortable Popular used in beauty salon and massage center, medical use CE and ISO13485 certificated Other Products MEDDOCARE Sell: 1. Cap: 1.1. Bouffant cap 1.2. Doctor cap:(surgical cap with tie/surgical cap with elastic) 1.3. Strip cap 1.4. Space cap 1.5. Peak cap 1.6. Round cap with fringe 1.7. Shower cap(PE) 2. Body wear: 2.1. PP/CPE Isolation gown :(With Knitted cuff/Elastic cuff) 2.2. Surgical gown:(Sterile/Non-sterile) 2.3. Lab coat:(PP/SMS) 2.4. Coverall: (PP/SMS/PP+PE) 2.5. Scrub suit:(PP/SMS) 2.6. Sauna suit:(PP/SMS) 2.7. Patient gown 2.8. Pants:(Man/Woman) 2.9. Brief:(Man/Woman) 3. Shoe cover/Boot Cover: 3.1. Non-woven shoe cover/boot cover 3.2. Non-shid shoe cover/boot cover 3.3. PE shoe cover/boot cover 3.4. CPE shoe cover/boot cover 4. Face mask: 4.1. Face mask with ear loops:(1ply/2ply/3ply/4ply) 4.2. Face mask with ties:(1ply/2ply/3ply/4ply) 4.3. Active carbon face mask:(3ply/4ply) 4.4. Face mask with eye shield:(3ply/4ply) 4.5. Dust mask:(120g/140g/160g/180g) 4.6. Paper mask:(1ply/2ply) 5. Other Main Products: 5.1. Gloves( HDPE/LDPE/CPE/TPE) 5.2. Apron:(Non-woven apron/PE apron) 5.3. Sleeve cover:(Non-woven sleeve cover/PE sleeve cover) 5.4. Bed cover/Bed Sheet 5.5. PE hair-cut cape 5.6. PE ear cover 5.7. PE raincoat/poncho 5.8. Wipe cloth/surgical dressing 5.9. Pillow case 5.10 Clear face mask
Made of viscose, polyester,sponge and viscose materials. Soft and comfortable,on distortion after high temperature sterilized,easy handle.
Made by nature cotton. White, soft and high water-absorbing. No fluorescent agent, non-toxic, no stimulation, no sensitization.
White,cotton yard 40's made of 100% cotton gauze, soft and high water-absorbing.
