Valve , pump , filter, homogenizer, colloid mill and pipe fittings.Manufacture
Stainless Steel Sanitary Welded/Clamped/Threaded/Bolted CIP Tank Rotary Cleaning Ball Product name SS304/316L Sanitary Clamped Spray Cleaning Ball Sanitary rotary cleaning ball cleaning ball is used for cleaning the inside of the tank. Type: Fixed or rotary cleaning ball Connection end: welded,clamped,bolted,threaded Standard: DIN,SMS,ISO,IDF,3A Material: SS304,SS316L Size: 1/2"-2 1/2",DN20-DN80 The ball diameter can be done as required Surface treatment: mirror or matt polished. Application: Food,beverage,dairy,pharmacy,chemical or any food processing industries Clean-In-Place Spray Balls Spray balls are used in the beverage industry to simplify the interior cleaning of tanks and piping. A fermentation or brite tank can be showered with high-velocity water and/or chemicals on the interior, causing a sheeting action down the vessel walls removing residues and sanitizing the tank. CIP spray balls are not only faster, but significantly safer for workers by removing the need for hand scrubbing and exposure to cleaning agents. Rotating vs. Fixed / Pin-Style Much like the rotating arm of a dish washer, a rotating spray ball offers cleaning advantages over a fixed or pin-style CIP system. A rotating spray ball can create a scrubbing like effect and offer better coverage. Stationary spray balls may not provide sufficient impact (pressure applied to the cleaning surface), or if any of the pores happen to clog, particularly in a mash tun or brew kettle, often create a 'dead spot' where manual cleaning is necessary. Sanitary Stationary Spray Balls are typically used in food and beverage applications for cleaning storage tanks. Featuring 2mm spray holes, these sanitary spray balls are available in three different spray patterns - 360°, 180° Bottom, and 180° Top. Blanks are also available as special order so you can create your own custom spray pattern. These stainless steel spray balls are designed to be mounted to either a tube or pipe. Application:Spray balls are mainly used to spray strongly and clean inside of tank,generally, in field of food-processing, beverage, beer, pharmaceutical industries. for example.
*ball valve O floating ball valve O trunnion mounted ball valve O top entry ball valve O full welding ball valve O orbit ball valve *ball valve O floating ball valve O trunnion mounted ball valve O top entry ball valve O full welding ball valve O orbit ball valve
*butterfly valve O wafer type / lugged type butterfly valve O flanged butterfly valve O concentric / eccentric butterfly valve O triple offset butterfly valve *butterfly valve O wafer type / lugged type butterfly valve O flanged butterfly valve O concentric / eccentric butterfly valve O triple offset butterfly valve
*gate valve O api gate valve O slab gate valve *check valve O swing check valve O lift type check valve O double-plate wafer type check valve *gate valve O api gate valve O slab gate valve *check valve O swing check valve O lift type check valve O double-plate wafer type check valve
Name:2pc ball valve Nominal pessure: pn1.6, 2.5, 4.0, 6.4mpa Material: stainless steel, 301, 304, 316 Size:1/4''~4" Thread end Channal: straight through type Applicable media: Water oil gas nitric acid acetic acid Applicable temperature: -20-180celsius degree Export: global Size:1/4''~4"
Name: ipc ball valve, thread end Full bore Material: wcb, ss201, 304, 316 Size: 1/4"-4" Nominal pressure:1.6-6.4mpa Applicable media: water, oil, gas, some corrosive liquid Welcome your enquiry and order! Size: 1/4"-4"
Material: stainless steel, 201, 304, 316 Size: 1/4"-4" Conneting form: thread Channel: straight through type Applicable media: water, oil, gas and some corrosive liquid Welcome your order and enquiry! Size: 1/4"-4"
This reducing valve the new type pilot extra-huge membrane pressure reducing valve developed by our company. It is greatly improved on basis of normal pressure reducing valve. The membrane use new material, enlarging the working area, so the slight change of upper pressure or lower pressure can be fed back to membrane of main valve, and adjust the opening of main valve to ensure the constant pressure of lower stream pressure.
Our check valves are designed to prevent reverse flow. Concentric and eccentric styles as well as our tapered disk design are available for horizontal, vertical applications and are working well without leaking while getting a return pressure. Our special designed check valve can be using for many applications in such as food, dairy, beverage, pharmaceutical, chemical, and many other industries.The materials are offered for food, dairy, beverage, pharmaceutical, chemical, and many other industries.Specifications:body:ss 316. Ss304 and ss316l are required based on big volume.Fully precision machined by cnc machine.Angle design make the biggest flowing liquid as well as for disk easy open and close.Connection: clamp end, weld end, male end and female end are available from 1/2 quot, 3/4 quot up to 4 quot.Connection: weld end are available the tubing according to 3a, sms, rjt(bs), din 11851.Middle clamp designed are available from 1/2 quot, 3/4 quot up to 3 quot.Middle flange designed are available from 1/2 quot, 3/4 quot up to 4 quot.Type of ends available:3a: clamp, weld, bevel male and female are available from 1/2 quot up 4 quotsms: weld end, male and female end are available from dn25 up to dn104.Din: weld end, male and female end are available from dn28, dn34, dn52, dn70, dn85 and dn101.6, dn104.I-line: available from 1 quot up to 4 quot.Spring:stainless steel sanitary both closing design, both opening design is required.Seal ring of stem:epdm. Viton or silicon is required.Body o-ring:nbr or epdm. Viton is required.Working temperature:-10o ~ 120o (epdm seal)features:opening pressure:1/2 quot-0.09 bar3/4 quot-0.23 bar1 quot-0.75 bar1.5 quot-1.3 bar2 quot-0.44 bar2.5 quot-0.68 bar3 quot-0.33 bar4 quot-0.42 barworking pressure:open pressure as above and max. Working pressure 10 bar. Each pc by shrink, 120pcs per carton, finally in plywood box
Sanitary ball valve for food and chemical use with iso mount plate weld / male end locking device can be required. 100 percent air tested under water at 100 psi open and closed positionsstandard end: weld amp clamp end other sms. Din. Rjt. Idf male / male can be required.Specifications:size :1/2 quot ~ 4 quotfeatures:material: astm-cf8m a351seal(gasket): ptfe (teflon)size: 1/2hydrostatic test pressure 1/4 Each pc by shrink, 120pcs per carton, finally into plywood box
Specifications 1.Steel elbow bend 2.Material : aisi304, 316l 3.Standards:din/sms/iso/3a/ds/bs/bpe/iso1127 4.Size: dn10-200, 1/2 quot-8 quot 5. Standards: DIN, ISO, IDF, 3a, sms 6.Connection: clamp, union, weld, threaded ends 7.Polish: mirror polishing , stain finishing 8, application : dairy, food, beer, beverage, pharmacy, cosmetic , etc. Each pc per polybag, 120pcs per carton, then into plywood box
Pneumatic butterfly valves conbined a piston within a cylinder and our various connecting butterfly valves. They are not only developed to single effect ( air/ spring ) but also double action ( air/ air ) in case of the actuator euqip with professional control box which is designed with various options such as proximity type, micro swith type and electrovalve 1 up to 3 pcs by requested. Each per ploybag, 100pcs per carton box, then into plywood box
1)body:wcb/ss 2)seat:wcb/ss 3)disc:wcb/ss 4)stem:ss 5)gasket:ss+expandable graphite 6)packing:expandable graphite Plywood case+plastic bag
Bspt, npt screwed or din2999 Spring return handle Nps dn d l h w 1/4" 6 10 55 42 95 (another more dimensions i won't make more description, if you need, please contact me)
Size from 1"to 6". Cartons or plywood cases
Material: Brass Cartridge: ADL or M. S Voltage supply: 4x1.5v AA batteries Color changing: 0-30 degree blue LED 30-40 degree green LED 41-50 degree red LED 51-100 degree flashing red LED Certification: CE, ACS.
1) Material: High quality brass, in high Polish and plating finish 2) Surface: Polish and with chrome plating 3) The flushing rate: 3seconds-10" about 1L-4L water.
1) Material: High quality brass, in beautiful Polish and plating finish, elegant appearance 2) Automatic, sensitive / inductive, water saving, self-closing 3) The flushing rate: 4-8 seconds, about 1-2L water 4) Dia. Of inlet pipe: G(1/2)'' 5) Dia. Of outlet pipe: G(1/2)'' 6) Water pressure: 0.05MPA~0.7MPA 7) Power and voitage: DC. 6V, AC. 220V~50/60Hz 8) Power consumption: 0.5mW,
1. Description of brass faucet body casting parts BL-46(brass faucet body, bath mixer body, bath body, casted faucet body, faucet parts, sanitary fitting) Code No. : BL-46 Material : Brass Net Weight : 670g Plating : Ni:2-3um,Cr:0.1-0.2um Assembling Dimension : for ¦µ40mm cartridge Loading Port : Ningbo/Shanghai MOQ : 500pcs/item; 2500pcs/order Delivery Time : 30days 2. Advantages of faucet body BL-46 1) Brass Die casting technology, weight : 670gm 2) Fit all kinds of mixers with 40mm cartridge 3) Do water test one by one (NO GULE) 4) Use brass in copper 58-59%, lead 2-2.5% 5) smooth without any flaw on surface 6) More mould with various weight & color are available at this shape 7) Easy Fitting. Package of faucet body Inner packing: white paper+bubble bag, each body is divided by partiton; Outer packing is carton case, ensuring no damage during transportation.
