W-Re series wire is tungsten-rhenium wire, which have unique quality because of its ductility compared to pure tungsten wire. Tungsten-rhenium (W-Re) maintains a much greater ductility due to its rhenium content. Multicrystal has its own technology to make a homogeneous alloy of rhenium and tungsten, and to work them to be various diameter sizes. Tungsten-rhenium wires have greater electric resistance than pure tungsten wires. In addition, they have unique mechanical properties. These electric and mechanical properties vary according to the rhenium content. Multicrystal prepares every kind of rhenium tungsten material to meet customer requests. Our tungsten-rhenium (W-Re) products are offered in rod, bar and wire.
FW & HW two series tungsten wires both are doped with Potassium (K), Silicon (Si), Aluminum (Al), which have a good reputation with customers both domestic and overseas. FW series wire is our standard non-sag, high quality, and characterized by long grain recrystallized, especially good for high speed coiling. As the raw materials, FW wire is often used to be filaments for fluorescent lamp. HW series wire excels in high temperature vibration resistance and anti-blackening property. It varies from a standard non-sagging wire, which is developed especially for halogen lamp filament by our original production control. We produce these wires via a technology well established by some experts' experience and knowledge of customers needs. We also undertake consignment processing on customer's request, such as heavy tungsten wire for redraw.
Tungsten carbide pellets. Wooden box, carton.
Tungsten carbide rods. Wooden box.
Tungsten carbide (TC) balls are used where extreme hardness and wear resistance is required; in such applications as bearings, ball screws, valves and flow meters. They are also used for coining and as pivots, detents and tips for gages and tracers. Decimal-inch sized tungsten carbide balls are widely used for ballizing (below) or measuring hole sizes (see Inspection Products data sheet.) They are also used for inspection tools, comparative checking and gaging.
Tungsten bar
Appearance: silver-gray metallic luster Type: molybdenum plates/ sheets, molybdenum foils, black molybdenum plates, white molybdenum plates. Application: For producing electric light source parts, components of electric vacuum and electric powder Semiconductor. For producing mo-boats, heat shield and heat bodies in high-temperature furnace. For processing molybdenum disks, molybdenum foil, as well as wafer-molybdenum system, Molybdenum electrode plates etc. Size: 0.1~20mm(thickness) by 50~420mm(width) by l Density: 10.2g/cm3 Package: 1): in dry wooden box of 1.0kg net each wrapped with paper, plastic bag and carton. 2): in wooden box of 7.0kg net each firmed with foam, 30kg weight max. Of each box.
Grade: gm Mo-content: 99.9% Density: 9.5g/cm3 Size: (80-280)mml(80-450)mm Tolerance: a2mm Making way: riveting and welding Adaptation temperature: 1400ª-1900ª Type: all kinds of molybdenum crucibles Main applications: it is used for metallurgy and machinery industry. Package: in wooden box wrapped by waterproof paper each
Tungsten wire Carefully packaged
Tungsten wire Our tungsten wire processed from tungsten rod of toshiba is quite suitable to be made into strand tungsten filaments for vacuum metalizing or various lamps filament. Sstandard or up to specific requirement
Tungsten Carbide Plate application Our carbide plates are used for mould, electronic progressive dies and punches. Cutting aluminum alloy ,cast iron , stainless steel. Refractory alloy steel, nickel-based alloy , titanium alloy and nonferrous materials. Make PCB drills , drills , end mills & reamers , mold punches , core pins&hole drilling tools. Features of High Performance 2MM, 3MM, 4MM, 330mm Long Carbide Plate, Tungsten Carbide Strips 1. Good wear resistance, good corrosion resistance and high toughness; 2. Extrusion method and HIP sintering; 3. Carbide wear strips Made of 100% pure raw materials; 4. With advanced equipment and process production; 5. All tungsten carbide wear strips pass the process and final inspection; 6. The ability to stabilize and continuously produce; 7. Our carbide wear strips have high quality and good price; 8. Fast stocking capacity and timely delivery.
Specifications: W plate can be manufacture according to customer request Owning two hot rolling machine and five cold rolling machines, we can supply tungsten and molybdenum sheet thickness of 0.05mm to 20mm.With very good performance, these products are used to produce electrode, heater ,heat-shield ,sputter target, crucible in electronic, vacuum furnace application. W plate in Max size: Thickness(mm) Width(mm) Length(mm) 1.5-2.0 150 200 2.0-3.0 200 250 3.0-4.0 250 600 4.0-6.0 300 600 6.0-8.0 300 800 8.0-10.0 300 750 10.0-14.0 200 650 >14.0 200 500
Sintered tungsten crucible Sintered with tungsten powder the sintered tungsten crucibles are multi-purpose production in sintering furnace, large crystal growth furnace. Thickness of sintered tungsten crucibles is usually 8-12 mm; diameter is typically 100-550 mm; height is typically 50-700 mm. Such crucible Purity: W �?� 99.95%; density is usually up 18.2g/cm3, by special needs the density can up 18.8g/cm3 or more. Features: 1.The overall density of sintered tungsten crucible is fairy high between 18g/cm3 to 18.3g/cm3; 2.Its chemical purity of sintered tungsten crucible can be above 99.95%; 3.The diameter of sintered tungsten crucible can be above 200mm; 4.The surface roughness of tooled crucibles does not exceed Rz 6.3; 5.The use temperature of sintered tungsten crucible should be below 2450�C in vacuum or deoxidize atmosphere. 6. The shapes and dimensions of crucibles are also made in accordance with customers' requirements. material density size W >99.95% 18g/cm318.3 g/cm3 Diameter: 100-550mm; Height:50-700mm Stamped tungsten crucible The tungsten crucibles can be produced of a tungsten plate by stamping, spinning, or welding. It can be used to produce single-use square or round crucible. Thickness typically 0.5 to 3 mm. Such tungsten crucible Purity: W �?�99.95%; density is usually up 19g/cm3 Forged tungsten crucible The tungsten crucible can be made of tungsten rod by turning , generally they are smaller and with higher density. Usually the wall thickness 3-10 mm; diameter of 80 mm. They are widely used by sintering furnaces for ceramics and other materials or vacuum evaporation coating machine. Purity: W �?� 99.95%; density are usually based on different diameters of up to 18.3 to 19g/cm3 Notice: 1.Before use, it is recommended that the consumer anneal (de-gas) crucibles in a vacuum without batch charging; 2.In a furnace, the annulment process should be supported with a vacuum at P< 10-3mmhg; 3.When preparing a sintered tungsten crucible for work, the consumer should not allow a sharp rise or fall in temperature, or abbreviate the recommended time periods for holding temperatures. Applications Tungsten crucible is mainly used used for rare earth,sapphire single crystal growth furnace , quartz glass, Metal extracting, metallurgical industry, machinery processing, glass and ceramic industries, etc.
1. Tungsten wire tungsten Filament: tungsten wire in spool Model NO.: KK Type: Tungsten Wire Material: W-1 Purity: 99.95%Min. Melting Point: 3410 Ceiclus Boiling Point: 5927 Ceiclus Density: 19.2g/cm3 Diameter: 0.01-2.00mm Surface: Black and Cleaned Export Markets: Global 2. Dimensions and Tolerances of tungsten wire: Tungsten wires diameters are generally expressed in terms of inches or mils (thousandths of an inch). For thin wires from. 001 inches up to. 020 inches in diameter, the diameter of the wire is measured by weight per unit length. That is, the weight expressed in mg of a 200 mm length of wire. The standard diameter tolerance is: � 3% of the weight measurement. Closer tolerances are available, depending upon the application for the wire product. Specification: Diameter, mm Difference between 2 feet, mm Inside diameter tolerance, mm Big heater element Small heater element 0.4-3.0 1 0.3 0.4-1.0 1 0.3 0.4-1.3 1 0.3 0.4-1.0 2 1 0.3 0.4-1.0 1 0.3 0.4-1.0 several stranded coils 0.3 Note: Different diameter and length are available for your 99.95% pure stranded tungsten wire. 3. Straightness of tungsten wire: Wire may be finished in the unstraightened or as drawn condition and is controlled to Bango's internal standards, In addition, wire can be straightened via mechanical or heat treating processes. Typically, the measure of the straightness of a tungsten wire is obtained by cutting a ten inch long piece of wire and allowing it to lie on a flat clean surface. The maximum deviation from a straight line along its length is the quantitative measure of its straightness. In general, as the degree of straightness increases, tensile strength decreases. 4. Quality and Finish: Wire is free of scratches, kinks and distortions insofar as they are harmful to the intended end use of the product. Surface finish is supplied in the black, as drawn condition, where drawing lubricants and oxides are retained on the surface, or in the cleaned condition by firing in hydrogen or electrochemical etching. 5. Products Feature: 1. Excellent Conductivity 2. Resistance of high temperature. 3. Abrasion and Erosion. 4. Suitable for making heating wires. 5. Twisted wires for coating films under vacuum and for tungsten wires in electrical light sources usage.
Tungsten rod specifications: Grade: W-1 Purity: 99.95% Appearance: Shine with grey or dark grey metallic luster. Application: Mainly used to found ingredient of material, cutter and heads, tungsten wire for lights instruments and conductor of heat, crankshaft and cylinder barrel of advanced automobile, ingredient of kinds of heat-resistant steel, mainly used to guns, artillery, rockets, satellite, airplane and ship. Product Feature: High melting point, High-density, high temperature oxidation resistance, long service life, resistance to corrosion. Composition: Grade Tungsten content Contents of Impurity Elements Total Content Content of each element W1 99.95%min 0.05%max 0.01%max W2 99.92%min 0.08%max 0.01%max Dimension: Diameter(mm) Length(mm) 2-10 2500 10-30 2000 30-60 1500 60-100 1000 100-200 600 Technical process: Tungsten Powder Isostatic Pressing Bar Billet Sinering Semi-finished bar Forging Swaging Polished End products Inspection Packing
Cemented carbide is the term which refers to sintered composite materials composed of at least one metal carbide constituent. Tungsten Carbide (WC), Titanium Carbide (TiC),Tantalum Carbide (TaC) are common constituents. Our tungsten carbide rods are made of optimum quality raw material WC, which acts as hard phase, and the binder agent Cobalt. With powder metallurgy HIP technology, carbide rods are sintered with homogeneous microstructure including little or even no porosity, to a great extent, increasing the whole performance and properties such as hardness and bending strength. Our HF30U solid rod obtains 93 HRA hardness and at least 4000 MPa transverse rupture strength.
Cemented carbide sleeve adopts raw and auxiliary materials such as primary saturated tungsten carbide, high-purity ultra-fine cobalt powder, precise carbon blending, tilt ball milling, vacuum stirring drying, precision pressing, digital degreasing sintering and pressure sintering personalized post-processing and other advanced powder metallurgy processes. Hard alloy sleeve is widely used in special valve industry, with long service life and reliable quality.
Cemented carbide sleeve adopts raw and auxiliary materials such as primary saturated tungsten carbide, high-purity ultra-fine cobalt powder, precise carbon blending, tilt ball milling, vacuum stirring drying, precision pressing, digital degreasing sintering and pressure sintering personalized post-processing and other advanced powder metallurgy processes. Hard alloy sleeve is widely used in special valve industry, with long service life and reliable quality.
Carbide plate are widely used for cutting different material like steel, stainless steel and aluminum. It can also be used for cutting wood and other material. With the advantage of high toughness, strong wearness and long life time. Different sizes are accepted at our plant.
Carbide plate are widely used for cutting different material like steel, stainless steel and aluminum. It can also be used for cutting wood and other material. With the advantage of high toughness, strong wearness and long life time. Different sizes are accepted at our plant.
