LJ-GM-AL series digital rail wear measuring ruler is used to measure the vertical wear and lateral wear of rails. It adopts digital reading and reasonable design, making it light in weight, easy to operate and intuitive in reading.
The rail expansion adjuster direction measuring ruler is specially used for the rail expansion adjuster, line, and turnout straight strand rail direction measurement on a straight line. Three people are required to complete the rail direction measurement in use, one of whom is a rail direction worker who holds a ruler to measure and record the rail direction, and the other two are line card workers who hold line cards at both ends of the rail direction measurement range.
The installation of spiral spikes must meet technical requirements. The installation height and installation position need to be accurately positioned. The spiral spike positioning frame is a special tool designed based on the sleeper structure to accurately position the spiral spikes.
NCM-4.8 internal combustion turnout grinding machine is a special machine suitable for the railway industry. It is mainly used for the maintenance of steel rail turnouts and can also be used for the maintenance of ordinary rails. The machine has the characteristics of high working efficiency, simple operation, fast on and off track, and wide adaptability, and is widely praised by users.
29517 Transportation Air Rail Auto Components Suppliers
Short on time? Let Transportation Air Rail Auto Components sellers contact you.
Super powerful brushless DC motor, maximum power greater than 8KW, high cutting efficiency
60 tracks, cutting time less than 90 seconds
The whole machine is 13 kg, ultra-light design. The battery is 7 kg and can be separated from the whole machine for transportation and charging.
Super long battery life, one charge can cut 6 heads (60 tracks)
The whole machine is waterproof and dustproof
No engine vibration, ensuring cutting accuracy
Rail frog and switch grinding machine
NCM-5.1 frog and switch grinder is specifically designed for grinding operations through switch and crossings and either side of the rail head. The grinding device of the machine can be tilted by 30�° from the vertical direction to the left and right, and the position of the grinding wheel can be adjusted along the vertical and horizontal directions So that the grinding device of the machine can work very accurately in the narrow space between the rails. The machine adopts the pull rod transverse feed mode, which is easy for the operator to grasp the feed force and improve the grinding quality and efficiency. It has the characteristics of precise turning and positioning at any position and angle of the turmout rail head.
Rail Curve Measurement Device
Curve versine measuring box, is also called string box for railway curve measurement. It is a necessary tool for railway works
construction. Curve positive vector measuring box is a regular work in rail line maintenance. In order to facilitate the work of
the worker to complete this job, a new line curve positive vector measuring box has been development.
Feature Curve versine measuring box is a fine production, it is portable, pocket, and good looking. The box body resistant ABS
material for yellow, and easy to operate.
1. Durable 2. High Accuracy 3. Accept customized
1. Durable
Adopt the high strength material, not easy to wear out.
2. High Accuracy: Reach 0.1mm.
3.Stable insulation performance
The ruler body is equipped with insulating board, which is made of epoxy glass fiber board (FR4). It has high mechanical strength performance under the temperature of -40 -120. The size of the mechanical ruler is stable and never degenerates, and the electrical insulation performance is stable in high humidity environment.
4. Accept customized
5. Small coefficient of thermal expansion stable ruler body
The ruler body is inlaid with steel ruler , and it will have higher precision, small thermal expansion coefficient, which can eliminate the effect of temperature on precision.
6.Multi-functions with wide usage could be used for measuring two kinds projects, suitable for different demands.
1. Measure the offset distance for the standard track gauge turnout
2. Could be used as track square ruler for measuring the right alignment of rail tracks
7.High hardness Measure Heads Made of Rockwell 52 steel, high hardness and not easy to rust
The turnout point rail wear measuring instrument is a special measuring tool used to measure rail vertical wear, rail side wear, point rail reduction, point rail vertical wear, point rail side wear, fixed point rail reduction, wing rail wear, movable point rail reduction and side wear. It has the characteristics of multiple measuring functions, easy to master, fast and accurate positioning, high measuring accuracy, high reliability and easy to carry.
The railway digital gauge is mainly used to measure the gauge, superelevation, inspection interval, and back protection distance of railway lines. It can be used for maintenance, overhaul, engineering surveying, and other line operations of relevant departments. The instrument has fast measurement speed and is easy to use. It can be used during the day and at night. It is an ideal measurement tool for the maintenance and engineering departments.
The rail internal combustion rail sawing machine is a new generation of internal combustion rail cutting machine based on the original rail internal combustion rail cutting machine of our company. It is based on the actual requirements of the on-site construction unit, greatly reducing the weight and increasing the cutting speed. It is an ideal rail cutting tool for railway engineering, bridge, line overhaul and other departments. It is suitable for laying railways, line maintenance and emergency repairs, especially for cutting rails in sections and intervals without power supply. It can be applied to various specifications of rails, especially for 50kg/m-60 kg/m rails.
Model
NDG-1
Type
Rail Tamper
Material
Stainless Steel
Dimensions (L x W x H) (mm)
280*380*1050 mm
Engine
MARUKEI G4LS two-stroke petrol engine
Power
1.47kW/7000-7500 rpm
Vibration frequency
110~7140 Hz
Exciting force
4200 N
Fuel consumption
90 min/L
Fuel
The mixing ratio of gasoline and two-stroke engine oil volume (25~ 30): 1
Fuel tank volume
0.95 L
Weight
14 Kg
NDG-1 Portable Rail Ballast Tamper
NDG-1 portable rail tamper is a special small track maintenance machine for tamping ballast uinder sleepers. Because of its light weight, it can be on and off the track at the same time with the operator. Therefore, the interval between trains can be used for ballast tamping. It is suitable for the maintenance and tamping operation of main line and tumout.
PRODUCT SPECIFICATIONS
Model
ND-6
Type
Rail Tamper
Material
Stainless Steel
Dimensions (L x W x H) (mm)
1080mm 510mm 410mm
Engine
1E50F, two-stroke gasoline engine
Power
2.4kw
Vibration frequency
133�±5Hz
Exciting force
6.0kN
Weight
18.5Kg
Place of Origin Liaoning, China
Purpose for replace/repair
Condition New
Type railway track
Material Steel
Dimensions (L x W x H) (mm) 1750*850*1510
Brand Name Tiegong
condition new
test report provided
Product name rail lifting and lining machine
place of origin China Liaoning province
Applicable industries Construction works
Color black yellow red
Packaging and delivery
Selling Units: Single item
Single package size: 1750X850X1510 cm
Single gross weight: 597.000 kg
YQJC-300 hydraulic switch lifting and shifting machine is suitable for the use of multiple machines in groups. It is a special equipment for moving and laying railway switches in a whole group. It is suitable for the operation of 60Kg/m rail switches. When adjusting, first loosen the hex screw under the lifting oil cylinder to move the lifting oil cylinder in the guide rail, and tighten the screw after determining the position of the support feet. The assembled turnout is arranged through this unit, and then the turnout is slowly lifted synchronously, and the auxiliary facilities are installed, the whole is moved to the scheduled laying position, and then adjusted to complete the laying of the turnout. It can also be used in a single unit to carry out single and double rail work on the line and maintain the line or the ballast.
item
value
Type
rail lifting & lining machine
Material
stainless steel
Dimensions (L x W x H) (mm)
1750*850*1510mm
Place of Origin
China
Liaoning
Brand Name
Tiegong
weight
588kg
warrange
1 year
Max. lifting amount
120-800mm
Power
9.5kW
Overall Dimensions
1750*850*1510mm
Product advantages:
1. Intelligent digital display, real-time display of remaining power and usage time (first in the industry)
2. Three-level shock absorption, reducing operator fatigue
3. The battery has passed UN38.3 international safety certification and GB34570 dual safety certification
4. Normal use at high altitude, low temperature resistance, normal operation at minus 40 degrees. It can be used normally in the Qinghai-Tibet Plateau and the extremely cold areas of Northeast China.
5. Brushless DC motor, maintenance-free, greatly reducing maintenance costs
6. Passed CRCC inspection and meets the highest railway standards
The internal combustion impact tamping pick is a light and efficient tamping tool. It has the characteristics of compact structure, light weight, high efficiency, easy operation, labor saving, good shock absorption effect, etc. It is suitable for crushing and tamping operations on various road conditions.
It is suitable for crushing and tamping operations of concrete, masonry, asphalt, rock, soil, etc. The equipment adopts piston buffer shock absorption and body elastic shock absorption, which has good shock absorption effect and minimizes the labor intensity during operation.
The portable internal combustion tamping pick is a small-scale track maintenance machine for railway track bed maintenance. It is mainly suitable for tamping slag at turnouts and busy lines during train intervals. It has the advantages of light weight, small size, excellent performance, convenient and quick on and off the track, and easy operation.
29517 Transportation Air Rail Auto Components Suppliers
Short on time? Let Transportation Air Rail Auto Components sellers contact you.
