Battery electric locomotive is a kind of track traction equipment powered by batteries, which is generally used in mines. There are two types of battery electric locomotives, explosion-proof type and ordinary type. The explosion-proof type is mainly used in coal mines. Ordinary battery electric locomotives can choose lithium batteries as power sources, which have the advantages of longer working life, fast charging, and ready-to-use charging. There are also many options in terms of speed regulation and braking methods. Speed control methods include resistance speed control, chopping speed control and frequency conversion speed control. Braking methods include pure mechanical braking, hydraulic braking and compressed air braking. In addition, electric braking can also be selected as an auxiliary braking method. Adhesive / total weight (t) : 6 ton Track gauge (mm) : 600.762.900 Traction (KN) : 7.06 Max. Traction (KN) : 12.26 Speed(km/h) : 7 Voltage (V) : 250V Battery Capacity (Ah) : 385 or 300AH Power (KW) : 7.5 KWx2 Dimensions Length(mm) : 3170 Width(mm) : 920,1082or 1220 Height(mm) : 1550 Wheelbase (mm) : 850 Wheel diameter (mm) : 520 Min Curve radius (m) : 6 Controller : Resistance or IGB or VF controller Braking method : Mechanical/Hydraulic brake
Application, characteristics and working environment of bucket-tipping mine car The bucket-tipping mine car is a narrow-gauge railway transportation vehicle for transporting coal, ore, ballast and other bulk materials in the mine. Generally, it must be tract by a locomotive or a winch. According to different structures and unloading methods, they are divided into four categories: bucket-tipping mine car, fixed mine car, single-side curved rail dumping mine car, and bottom-dumping mine car. Warranty : No Color : Black Customized : Customized Condition : New Product Name : Mining Wagon Application : Mining Car Dimension(L W H) : 1970*1070*1250 Capacity : 1-20t Volume : 1m3 Gauge : 600mm Wheel Base : 600mm Traction Force : 60kn Weight : About 680kg Key Words : Mining Wagon Name : Mining Wagon Transport Package : Naked Specification : KFU1.0-6 Production Capacity : 10 Cartons/Month
Total weight (t) : 8 ton Track gauge (mm) : 500, 600, 762, 900 Traction (KN) : 11.18 or 12.83 Max. Traction (KN) : 19.62 Speed(km/h) : 6.2~7.8 Battery Voltage (V) : 110~140V Battery Capacity (Ah) : 440 Power (KW) : 11 or 15 KWx2 Dimensions Length(mm) : 4420 Width(mm) : 920,1082 or 1220 Height(mm) : 1600 Wheelbase (mm) : 1100 Wheel diameter (mm) : 680 Min Curve radius (m) : 7 Controller : Resistance or IGBT Braking method : Mechanical or air brake
The locomotive is a new product specially designed for large mines. It applies IGBT speed control way, realizes smooth starting and low failure rate, and is a new- generation energy efficient product. Main features include: small outer diamensions, short wheel base, small turn radius, high speed and strong traction force. V-shape rubber damps are used on this locomotives in order to bear viration and impact from lengthways, vertical and transverse directons. The sails are elastic rubber plates which can ensure a reduced shock in operation. Adhesive / total weight (t): 14 ton Track gauge (mm): 600.762.900 Traction (KN): 26.68 Max. Traction (KN): 34.3 Speed(km/h): 12.87 Power (KW): 52*2 Dimensions Length(mm): 4800 Width(mm): 1060,1222or 1360 Height(mm): 1700 Wheelbase (mm): 1700 Wheel diameter (mm): 760 Min Curve radius (m): 12 Controller: Resistencia or IGBT Braking method: Mechanical
Adhesive / total weight (t) 7 ton Track gauge (mm) 600,762 or 900 Traction (KN) 13.05kN/ 15.09kN Max. Traction (KN) 17.2kN Speed(km/h) 11km/h Voltage 250V or 550V Power (KW) 21kw *2 or 24 kw*2 Dimensions Length(mm) 4550mm Width(mm) 1050,1212 or 1350mm Height(mm) 1550mm Wheelbase (mm) 1600 mm Min Curve radius (m) 7 m Wheel diameter (mm) 680mm Controller Resistance or IGBT or AC controller Braking method Mechanical or air Brake
BS 6853Code of practice for fire precautions in the design and construction of passenger carrying trains-passenger train Fire Classification: Category Ia , Ib, II Test Category: Table1 â?? Table14 Test Items: Flame Spread, Surface Flammability, Smoke Density, and Smoke Toxicity Test Standards: BS 476-6ï¼?BS 476-7ï¼?BS 6853 Annex D, BS 6853 Annex B fire test range of products 1. BS 6853 - Table 1: Interior horizontal supine surfaces 2. BS 6853 - Table 2: Interior vertical surfaces 3. BS 6853 - Table 3: Interior horizontal prone surfaces 4. BS 6853 - Table 4: Exterior horizontal supine surfaces 5. BS 6853 - Table 5: Exterior vertical surfaces 6. BS 6853 - Table 6: Exterior horizontal prone surfaces 7. BS 6853 - Table 7: Interior minor use materials of mass 100g to 500g 8. BS 6853 - Table 8: Exterior minor use materials of mass 400g to 2000g 9. BS 6853 - Table 9: Seat trim 10. BS 6853 - Table 10: Seat shell (back and base) 11. BS 6853 - Table 11: Textiles (free standing and lying) 12. BS 6853 - Table 12: Mattresses 13. BS 6853 - Table 13: Interior cable 14. BS 6853 - Table 14: Exterior cables We also can provide the following service of fire test to Railway EN45545-2 Fire protection of railway vehicles: Requirement for fire behaviors of materials EN45545-3 Fire resistance requirements for fire barriers NFPA 130 Standard for fixed guideway transit and passenger rail systems DIN5510-2 Fire behaviour of materials and parts, classification, requirement and test methods BS6853 Code of practice for fire precautions in the design and construction of passenger carrying trains NF F16-101 Railway Rolling Stock Fire Behavior Choice of Material
TB/T 3237 Flame retardant technical specification of decorating materials for multiple unit train. Test Method: GB 2406 Oxygen index test UIC 564 Combustion test GB 8323 Smoke density test TB 3237 Part 4.4 Smoke toxicity test Reference Standard: GB/T 2406.2 Plastics - Determination of Burning Behavior by Oxygen Index GB/T 10707 Rubber - Determination of the Burning GB/T 8323.2 Determination of Optical Density by a Single-chamber Test UIC 564-2 Regulations relating to fire protection
30Kg Light Steel Rail 6m Standard Light Steel Rail,Light Steel Rail,Steel Rail Manufacturer Material� Q235/55Q Weight�30.10Kg/m Length�6-10m Standard�GB11264-2012 PRODUCT PARAMETERS Parameters type weight (kg/m) material length (m) 30kg 30.10 Q235/55Q 6-10m rail height (mm) bottom width (mm) head width (mm) web thinkness (mm) 107.95 107.95 60.33 12.3 Light Steel Rail size Rail Height Bottom Width Head Width Web Thickness Weightkg/m 8kg 65 54 25 7 8.42 12kg 69.85 69.85 38.1 7.54 12.2 15kg 79.37 79.37 42.86 8.33 15.2 18kg 90 80 40 10 18.06 22kg 93.66 93.66 50.8 10.72 22.3 24kg 107 92 51 10.9 24.46 30kg 107.95 107.95 60.33 12.3 30.1 Introduction and application Steel rail, also called rail track, steel track, is the main component of railway track. Its function is to guide the wheels of the locomotive, bear the great pressure of the wheel, and keep the stability of railway transportation. The rail must provide continuous, smooth and minimum rolling surfaces for the wheels. In electrified railway or automatic block section, rail can also be used as an orbital circuit. The steel rail in china are divided into Crane rail, Heavy rail and light rail. Light rail is divided into GB and the ministry standard (YB metallurgical standard). There are 8kg, 12kg, 15kg, 18kg, 22kg, 24kg, 30kg. The light rail is mainly used for the laying of temporary transportation lines and light locomotive lines for forest areas, mining areas, factories and construction sites.
It was 18th,July,2013 when I begun my career in Zhengzhou-Europe International Shuttle Train project and also the project came into operation. I was very professional and experienced in the whole procedure of train transportation industry and we will be at your service with lower price and higher professionality.Also We can provide "door to door"service in European countries.
Rail adjusting machine 6.1 rail stress relieving equipment This machine is the special device to exert rail vibration on seamless rail to relieve the rail stress. It is pushed forward by a single operator. Product features It is equipped with two pairs of knocking hammers, which knock the inside and outside of two steel heads with same force. It can knock each rail for 48 times per minute. It also contains a startup engine which drives the knocking hammer control rod via a v-belt drive reducer. The knocking hammer is equipped with plastic pads to prevent the formation of knocking marks on the rail or damage on rail. The entire system is mounted on a ultra-light cast with 4 cast irons and insulation wheels. The knocking is start by the hand clutch mounted near the engine. The complete machine can be on-track through 4 lifting eyes by the crane and also by four persons. The knocking hammer is covered with a metal mesh to protect the operator and worker safety. In case of emergency, it can activate the emergency switch to shut down the machine.
Rail wrench 2.1 Yhd-t1 portable impact wrench Name:yhd-t1 portable impact wrench Id:c015 This wrench is designed for fastening and loosening the sleeper nuts and fishplate bolts. Product features Impact function to assist loosing the bolts. Running clockwise & anticlockwise. Ergonomic design ensures the operation comfort and low-vibration. Technical specifications Itemsunitspecifications 1engine shilf 2idle speedrpm2700 3coupling square 4maximum torquen.M2000 5bolt capacitymm36?46?50 6dimensionmm650*382*273 7weightkg18 8noise leveldb74.6
Rail cutting machine 4.1 Yhd-c1 gasoline rail cutter Name: yhd-c1 gasoline rail cutter Id: c027 For cutting rails of highest strength. Product features Cutting time on average 75-90 secs. High precision cutting with horizontal and vertical deviation less than 1%. Automatically adjustable cutter shield according to the movement of cutting wheel ensures highest safety requirement. Unparalleled ergonomic design reduces vibration and noise levels. Technical specifications ItemsUnitSpecifications 1Engine Husqvarna k1260 2Idle speedRpm2700 3PowerKw5.8 4Cutting disc diameterMmF=350?f=400 5Max cutting depthMm125?145 6Noise levelDb85 7WeightKg20 8DiameterMm550*500*850
Rail grinding machine 1.1 Yhd-g1 rail profile grinding machine Name:yhd-g1 rail profile grinding machine Id:c001 This machine is designed to grind the rail head and remove the weld beads at welding joints, ensures perfect grinding of rail head. Product features Precise setting of grinding angle through an outrigger. The grinding of rail top and sides can be completed in one continuous grinding operation. Equipped with two support rollers and two guide wheels to ensure a smooth operation on the rail. Ergonomic design allows grinding work easy and fast. Technical specifications Itemsunitspecifications 1enginehonda gx270 2power/speedkw/rpm5.1/3600 3fuel consumption rateg/kw h=374 4grindstone sizemmf=150, d=72 6adjustable grinding angle-90~+90 7dimensionmm1120*760 *800 8weightkg79 Bopp Pearlized Film
Rail tamping machine 5.1 Yhd-d40 light tamper Name: yhd-d40 light tamper Id: c050 Light tamper applicable to railway maintenance of ballast track bed. The tamper is easy and fast to insert and pull out from the ballast, especially applicable to turnout tamping operation. Product features Light in weight (17kg) and long servicing life with low maintenance. Perfectly protect the ballast compared to other conventional tamper. Ergonomic design enable low vibration and comfortable operation of operator. Anti-loose connecting device facilitates the maintenance on site without special tools. Technical specifications ItemsUnitSpecifications 1Engine Komatsu type g4l 2PowerKw1.5 3Rated vibration accelerationM/s²1400 4Maximum non-loaded amplitudeMm>5 5Vibration frequencyHz130 6WeightKg17 7Dimensions Mm1060 x 400 x 280 The product has obtained 1 national invention patent and 3 utility model national patents. The product has passed the technical identification of the shanghai railway administration and the crcc certification.
Rail drilling machine 3.1 Yhd-d31a ultra-light rail drilling machine Name: yhd-d31a ultra-light rail drilling machine Id: c024 Compact design ensures that the machine is light and robust. Product features short drilling time with powerful engine. simple clamping device to ensure accurate and quick fixing within a few seconds. lightweight, firm structure and optimum comfort. automatic lubricant feeding during drilling work. max. Drill bit diameter up to 38mm. Technical specifications ItemsUnitSpecifications 1Engine Stihl fs120 2PowerKw1.3 3No-load speedRpm9000 4Drilling accuracyMm?0.2 5Spindle speedRpm180 6Drilling strokeMm50 7DimensionsMm650*450*450 8WeightKg20
Oem precision lost wax casting railway parts -zhaoqing olym metal products co., ltd is an oem foundry adopting of advanced sol-wide (colloidal silica)investment casting process, produce castings of various kinds of carbon steel, alloy tool steel, wear-resistant alloy steel, heat-resistant alloy steel and all kinds of stainless steel &it's developed products, with an annual output of 600tons of investment castings production capacity, 80% of them were exported to the united states, germany, japan, spain and other countries.
Product Name: China train casting parts/Locomotive parts/Train casted parts Materials: Alloy steel and other metallic materials Items: FOB Ningbo or Shanghai;CIF xxxxx Lead time: 30 days Place of Origin: Ningbo, China Software for specification drawings: PDF, Auto CAD, Solid work, JPG, ProE Surface treatment:coated painting,plated,water spray,galvanizing etc Main Technics: silico sol casting,water glass casting,lost-foam casting,sands casting; open forging,closed-die forging Heat treatment:anneal,normalization,quench,temper Quality Inspection:Spectrograph,hard test machine,tensile strength tester,impact test machine,coordinate measuring machine,metallographic mcrocope,X-ray tester,Ultrasonic detecting sinspection,etc.
Product Name: forged wheels Materials: Carbon Steel AISI 1045, also Cast iron, Gray Iron, Ductile iron, Resistance cast iron, High Cr Cast Iron, Alloy Steel, Stainless steel, High Manganese steel, etc. Items: FOB NingBo or Shanghai Lead time: 30 days Place of Origin: Ningbo, China Software for specification drawings: PDF, Auto CAD, Solid work, JPG, Proe
Led lights, automotive led lights, led working light,jeep light, led strips,neon lights and other electronic products like switches, connectors,harness, usb car charger,fuses and so on..
For tamping on the railway linear line to prevent ballast hardening, two persons as a team to tamp one sleeper with ballast or gravel at same time, can use gasoline engine or diesel engine as power supply, completed with off-track frame and walking frame to ensure easy operation. This machine can be customized according to customer require. Engine 4-Stroke Gasoline engine Power 9.5kW R.P.M: 3600 r min Hydraulic system working pressure 5 6MPa Vibrating frequency 66.7Hz Vibrating force 22kN Max inserting force 16kN Max clamping force 6.5kN 2 Insert depth 110mm 10mm under the sleeper Production efficiency 260 pieces unit. hour Machine weight 1385kg Overall size L W H 2580 2150 1950mm Walking frame track gauge 1435mm adjustments can be made according to customer requirement
