Find Verified Tools Instruments Suppliers, Manufacturers and Wholesalers

Automobile ABS+EBD brake system test bench (I) Product introduction This test bench USES Passat B5 ABS braking system as the main material, and adopts four-channel ABS adjustment circuit, and four wheels are adjusted separately. ABS system can run normally and can simulate the working process of

Product description

Portable Three-phase Standard Meter is a portable reference standard meter used to test three phase meters and single phase meters, it designed to work both in the and in the laboratory.



Technical index

Portable Three-phase Standard Meter

Electrical parameters

Accuracy class

0.05%

Voltage supply


Range

5V-480V

Error

Display range

5.000000V-480.0000V

Harmonic

2nd-63st

Range

1mA-120A

Error
Display range

1.000000mA-120.0000A

Active power
0.05% (0.01A-0.2A)



Reactive power

Apparent power

Active energy

Product description

The portable Three-phase standard power source is suitable for metering departments, power distribution terminals, power management, reactive power compensation devices and enterprise production.



Technical index

Electrical parameters

Accuracy class

0.05%, 0.1%

Power supply

Single phase AC 85-265 V, frequency 50/60 Hz

AC Voltage output

Range (U1, U2, U3 phase)

57.7V/100V/220V/380V; range switch automatically

(Max 500V)



Electrical parameters - continued

0.01% RG

Accuracy

0.05% RG

Stability

Product description

Portable Three-phase Standard Meter is a portable reference standard meter used to test three phase meters and single phase meters, it designed to work both in the eld and in the laboratory.



Technical index

Portable Three-phase Standard Meter

Electrical parameters

Accuracy class

0.05%

Voltage supply

Range

5V-480V

Error

Display range

5.000000V-480.0000V

Harmonic

2nd-63st

Range

1mA-120A

Error


Display range

1.000000mA-120.0000A

Active power

Product description

Electrical equipments in modern industrial, commercial and residential users are more sensitive to power quality, and have a higher requirement of quality of power supply. Currently, harmonics,electromagnetic interference, power factor reduction have been tied to the three hazard of the power system.

When it is interfered or contaminated, grid power quality can t reach the national standards, so it has to be targeted on the grid power quality improvement. To understand the actual situation of power quality, you must have the appropriate equipment to test and analysis the actual situation. Counter the domestic condition, our company developed the professional power quality analysis instrument, which is suitable for the country.



3 phase handheld power quality analyzer Technical index

1. Input characteristics

Product description

Partial discharge comprehensive analyzer is the dedicated product to measure and analyze the insulation ability of electrical equipment. This system adopts modern electronic and computer integrated technology with the functions of signal amplification(analog signal, electronic signal, digital signal), filtration, data sampling, data processing, figure display, test report generation automatically so that it may finish the measurement, location and analysis of the partial discharge.



Technical index

Technical characteristics

Number of interfaces

Free-running 4 interfaces

Sampling rate

1M. 5M. 10M selected

Sampling accuracy

12bit

Range changing

-40dB, -20dB, 0dB, 20dB, 40dB ,60dB, totally 6 types

Measurement frequency range

3db bandwidth 10kHz 1MHz

Digital filtering

10kHz 1MHz freely selected

Program controlled filter subsection

Nonlinear error in the range

10%

Measurement range

0.1pC~100,000pC

Sensibility

0.1pC

Capacity range of the measured product

6pF 250 F

Frequency range of test power

50 500Hz

Display

Display screen

12 TFT true color touchable LCD screen

Resolution

1024 768

Interface

USB

3 types, use of external mouse, keyboard or other USB devices.

Power mode

AC 220V; Frequency 50Hz; Power 300W

Electric signal interface

4 BNC interfaces, use of signal input.

Optical signal interface

4 types, use of signal input

Network interface

1 type

Landing button

External landing

General instruction

CPU

Basic frequency 1.60GHz

Ram

2.0GB

Hard disk

128GB SSD

System

Windows Xp

Operating environment

Size

Weight

15.8kg

The model Q110 ring type current clamp probe is a high accuracy CT, the advanced design ensures enhanced linearity 0.2% and the jaw opening system provides enhanced safety. 110mm large jaw ensures it can measure up to 1000A AC current, Frequency range from 10Hz to 20KHz. It can connect with phase detection analyzer, industrial control equipment, data recorder, oscilloscope, harmonic analyzer, electric power quality analyzer, high precision digital multi-meter & cable fault analysis etc.
FEATURES

The hand-held network packet analyzer is a hand-held smart substation optical digital network analyzer. It is a new product that relies on the rich on-site debugging experience and user and has been re-designed. It is a substation and the daily maintenance, detection, commissioning, monitoring and analysis equipment of manufacturers. With a new test method, a complete feature gives you a new experience of intelligent substation efficient and convenient testing.



Technical parameter

Voltage current output accuracy Voltage current measurement accuracy The AC current is in the range of 0A-10A, error: no more than 0.01A;
The AC current is in the range of 10A-100kA, error: no more than 0.03%.
Current resolution: current is 0.001A in the range of 0A-100KA
The AC voltage is in the range of 0V- 100V, error: no more than 0.01V;
The AC voltage is within 100V-1000kV range, error: no more than 0.03%.
Current resolution: current is 0.001V in the range of 0V-1000kV
Phase output accuracy Phase measurement accuracy The voltage current phase is in the range of 0-359 , the error is not more than 0.001 , the resolution is 0.01
Packet output synchronization Tester Different optical network ports packet output disabled time no more than 1s
UCA consistency test Test through UCA IEC61850, and obtain the test certificate

SOLID METAL BUFFING WAX

Color : Purple /Black /Yellow / White / Green /Blue

Application : Use with cotton wheel, good gloss,, with automatic polishing machine and manual polishing ,suitable for stainless steel, copper ,iron,zinc, aluminum alloy and other metal rough polishing and find polishing

GF312B portable three phase energy meter calibrator with printer is used to calibrate three phase, single phase, active and reactive energy meters error. The instrument has a micro printer and portable design. It is very suitable for on-site calibration of electric energy meters.
Feature:
1.accuracy:0.05%,0.1%,0.2%
2.Test range:0-600V;
3.With printer
4.Harmonic:2-64times
5.Weight: 12kg
6.IP65

Product Introduction


The handheld SF6 gas leak detector is a stable and sensitive leak detector. We have fully considered the actual needs of the majority of users, and at the same time apply our rich technology and experience to this product, allowing users to enjoy an excellent price performance ratio.



The high tech central microprocessor unit is the core of the qualitative leak detector for sulfur hexafluoride gas. Its digital signal processing capabilities can better manage circuits and process detection signals. Due to the use of a large number of integrated circuits, the number of components in the circuit is reduced by 40, which greatly improves reliability and efficiency. The microprocessor can monitor the probe and battery voltage at a rate of 4000 times per second. Even the smallest signal can be captured. It can work stably and reliably in any environment.



The SF6 gas qualitative leak detector has added some convenient functions. Seven-level sensitivity, the sensitivity is increased by 64 times. The three color LED gradually indicates the degree of leakage in a large range, and is also used to display the sensitivity level and battery power. Touch the keyboard to perform all operations. The avant-garde slender shape design greatly facilitates the user's use and maintenance. It is very convenient to use the indicator light in the direct range.

Overview

The hand held network packet analyzer is a hand-held smart substation optical digital network analyzer. It is a new product that relies on the rich on-site debugging experience and user communication in and has been re-designed. It is a substation and the daily maintenance, detection, commissioning, monitoring and analysis equipment of manufacturers. With a new test method, a complete feature gives you a new experience of intelligent substation efficient and convenient testing.



Technical parameter

Voltage current output accuracy Voltage current measurement accuracy The AC current is in the range of 0A10A, error no more than 0.01A;
The AC current is in the range of 10A-100kA, error: no more than 0.03
Current resolution current is 0.001A in the range of 0A-100KA
The AC voltage is in the range of 0V- 100V, error: no more than 0.01V
The AC voltage is within 100V-1000kV range, error no more than 0.03
Current resolution: current is 0.001V in the range of 0V1000kV
Phase output accuracy Phase measurement accuracy The voltage current phase is in the range of 0 359 , the error is not more than 0.001 , the resolution is 0.01
Packet output synchronization Tester Different optical network ports packet output disabled time no more than 1s
UCA consistency test Test through UCA IEC61850, and obtain the test certificate
GOOSE input and output function
The tester is really ready for the Goose output function, supports the output of 60 GOOSE control blocks, and the output message is required to meet the needs of the configuration file. The output message data type can support single point, double point, floating point type

The tester has a Goose reception function, and the analysis of multiple Goose block messages can be performed. The statistics include channel variations, and displacement channel information.