As an alternation product of generation,the model QT quarter-turn valve electric actuators are developed by our company.These actuators are suitable for use on butterfly valve,ball valve and cock valve etc.Which are required to turn 90¡ã.The case body is made of die casting aluminium, these actuators are featured by attractive appearance,small size,light weight,high efficiency,high reliability,high protection capability,low noise and so on. Both operation at site and remote controlling can be carried out. Wooden case.
Fire Gate valve Size:Dn50-DN600 Pressure:PN10/16/ANSI 125 Insepction:API598 Flanges:Ansi b16.5 Bs4504 En 1092 Size:Dn50-DN600 Pressure:PN10/16 Temperature:0-80¡æ Material:GG25/GGG40. Wooden case.
100X diaphragm type remote control float valve has many kinds of function and is installed at the inlet of pool or water tower, when the water-level reach the setting level, the main valve closes by the float pilot valve¡¯s control and stop supplying water, when the water-level comes down, the main valve opens by the float pilot valve¡¯s control and supply water to the pool. 100X remote control float valve can control the water-level of pool precisely and is not interrupted by the pressure. 100X remote control float valve can be installed freely according to the height of pool and using space. It is easy to maintain, to commission and to inspect. This kind of valve is reliable on sealing and it¡¯s life is very long. Diaphragm type valve is reliable and it¡¯s strength is high and it moves quickly and it is suitable for pipeline DN450 mm or less. For DN500 mm or more, piston type valve is advised to be chosen. Wooden case.
Cast Steel Globe Valves Class1 150/300/600/900/1500 Bolted bonnet, Outside screw & yoke, Rising stem, Plug type disc, Threaded seat ring. Description: Design and manufacture: ANSI B16.34 and Design and manufacture: BS1873 Test and inspection: API 598 . Face to face dimensions: ANSI B16.10 End flange dimensions: ANSI B16.5 Butt-welding ends: ANSI B16.25 Size: 2" ~ 16". Wooden case.
A. Specification: DN50-DN600 B. Characteristics: Pin-less; the valve stem has axial positioning device; the two end faces of valve seat are widened; no special-purpose flange is required; the end faces of valve seat are of tongue-and-groove structure, which could avoid deformation of valve port in case of clamping. C. Working pressure: 1.0/ 1.6MPa D. Materials Valve body: Cast iron/ ductile iron/ cast steel/ stainless steel Valve disc: Ductile iron/ bronze/ nylon/ ceramics/ stainless steel Sealing seat: Nitrile butadiene rubber (NBR) / ethylene propylene rubber (EPDM)/ fluorine rubber (VITON) silicone rubber (SEP)/ tetrafluoroethylene (PTFE) . Packing with crates cover PE films.
Dn50-dn1400 Item Name Material 1 Body Ci/di 2 Seat Epdn/nbr/viton 3 Disc Di/cf8/cf8m/Gßtaf¡ 4 Pin Ss316/ss416 5 Stem Ss416/ss304/ss316 Adoptive standard: 1. Valve design : mss sp-67 for casting steel, api609 + ansi b16.1 for di/ci. 2. Flange : ansi b16.1 class 125, din2501 pn10/16, bs4504 pn10/16. 3. Face to face :bs en 558-1, the lenth in bs en558-1 is the same in din3202/api609/mss sp-67:2002 4. Pressure test conform to api598.
Product range: Butterfly valves (wafer and lug type), wafer Check valves, Double eccentric butterfly valves, Flange butterfly valves, Grooved end butterfly valves, Gate valves(DIN3352-F4,F5), Dismantling joint, Electric actuator, Pneumatic actuator, Castings, Spare parts of valve etc. Material: stainless steel(SS304, SS316), Carbon steel, Cast iron, Ductile iron, Al bronze, Hastalloy, Duplex, PTFE etc. Size: 50mm~1800mm Working Pressure: PN10/16(Class125/150) Wooden case
Butterfly valve
KLD20BD3 mini motorized ball valve Size from 1/2" to 1" Technical parameters: Working voltage: dc5v, dc9v-24v Working current: 67ma Static current: 32ma Working pressure: 1.0 mpa Actuator rotation: 90 degree Rotation direction: double acting Enclosure: ip67 Input power: max 5w Material of main parts: Actuator: heatproof abs Sealing: ptfe, silicon rubber ball seat, epdm and nbr stem seat, nbr o-rings Body: brass or stainless steel Ball: brass or stainless steel Stem: brass or stainless steel Dc motor Wiring: three wires, one for positive supply, others are used as the normal solenoid valve use, which can take place of solenoid valve.
Reslient Seat Gate Valve DIN 3352 F5 Technical Specification: Valve Design: EN 1171/DIN 3352/EN 1074-1 Face to Face: EN 558-1 Series 15/ DIN 3202 F5 Flange Drilling: EN 1092-2/ ISO 7005-2 Hydraulic Test: EN 12266/ ISO 5208 Shell Test Pressure: 24 bar Sealing Test Pressure: 17.6 bar The main advantages of gate valve include: 1. The fluid resistance of the valve is small. Because the valve body of gate valve is straight-through type and the flow of the medium doesnt change direction, the fluid resistance of it is small compared with other kinds of valves. 2. The sealing performance is better than that of other shut-off valve. The opening and closing of it is more conveniently. 3. The range of applications is more wider. In addition to steam, oil and other media, it can be used in medium containing granular solid and with a large viscosity. It can also be used as air-venting valve and low vacuum system valve. 4. Gate valve has dual flow directions. Its not subject to the flow directions of the medium. Therefore, it is suitable for use in pipeline where the medium may change the flow direction. It is also easy to install.
Ductile Iron Wafer Butterfly Valve:
Size: DN50-DN300; Design standardï¼?EN12334 Connection flange: EN1092, ISO7005, ASME B16.1; Face to face: EN558 (48 serial); Testing standard: EN 12266-1 Working pressure: PN10/16: DN50-DN300
Size: DN50-DN300; Design standard: EN12334; Connection standard: EN1092, ISO7005, ASME B16.1; Face to face: EN558 (48 serial, 16 serial ); Testing standard: EN 12266-1; Working pressure: PN10/16/25: DN50-DN300
Size: DN40-DN1200 Design standard EN12334, API594 Connection standard EN1092, ISO7005, ASME B16.1 Face to face ISO 5752 series 16, EN558 series 16, ASME B16.10 Testing standard EN12266-1, API598 Working pressure PN10/16: DN40-DN1200 PN25: DN40-DN600 150psi:1.5"-48", 250psi:1.5"-36"
Size: 2"-24" Design standard: EN12334, AWWA C508; Connection standard: EN1092, ISO7005, ASME B16.1; Face to face:ASME B16.10, ISO5752; Testing standard: EN12266-1, AWWA C508; Working pressure: PN10/16: DN50-DN600, 150psi/250psi: 2"-24"
Design standard: UL 1091 Connection standard: AWWA C606, ASME B16.1, ASME 16.42, EN1092-2, ISO 7005-2. Mounting flange: ISO5211 Testing standard: UL1091 Working pressure: 175psi/232psi: 2"-24", 300psi: 2"-12"
Size DN40-DN1200; Design standard: EN1171; Connection standard: EN1092-2; Face to face: EN558 (14/15 serial ); Testing standard: EN12266-1; Working pressure: PN16 DN40-DN1200 ; PN25 DN50-DN300
Size: Wafer DN40-DN1200, Lug DN40-DN1200, Flange DN40-DN3000; Design standard: API609/EN593; Connection standard: ISO7005-2 PN10/16 /25, EN1092-2 PN10/16/25, GOST PN10/16, ASME B16.5 CLASS 150, ASME B16.47 CLASS 150, JIS 10K.; Mounting flange: ISO5211; Face to face: API609A / EN558 (20 serial ); Testing standard: API 598 /EN12266-1; Working pressure: PN10/16 DN40-DN3000, PN25 DN40-DN600; Operation type: manual electric, pneumatic, hydraulic.
Size: 2"-24"; Design standard: UL262, FM1120&1130; Connection standard: AWWA C606, ASME B16.1, ASME 16.42; ANSI/AWWA C111/A21.11, EN1092-2, ISO7005-2; Testing standard: UL262,,FM1120&1130; Working pressure: 175psi, 232psi, 300psi;
Size range: 3"-160" (DN80-DN4000); Pressure class: Class150, Class300, Class600,, Class900, Class1500, PN25, PN40, PN63, PN100, PN160, PN250 Type: wafer, lug, flange, butt-welded; Firesafe test: ISO10497, API607, API6FA; Low emission: ISO15848-1, TA-Luft, EPA Method 21.
