Strong dirt resistance; Easy application Rapid drying speed, 12000 times for scrub resistance. Method * surface preparation: the grease, dust, moisture, rust on the bonding surface must be cleaned off. Make sure that the surface must be dry during rainy days, or it will cause non-stick atmosphere. * mix well before painting, plus proper clean water for diluting and mix well. * stop application when temperature is below 8 celsius * proposed painting 2 times and recoat interval should be over 2 hours (depend on touch dry). * application tools: brush, roller, and spray *consumption: the theoretical value - 8 to 12 m2 / time/kg (the thickness dry coating film is 30 microns) (actual consumption may vary due to different construction method, dryness and hardness level of the base surface, roughness and construction environment) Attention Shelf life: 24 months in sealed cans. Storage condition: keep it out of touch of children, store in cool, dry and ventilated place. The storing temperature shall range 5-35 celsius, Thinned paint should not be poured back to the original can. Technical index This product conforms to china national mandatory standard:gb/t9756-2001 *appearance: white viscous liquid *solvent type: water-base *color: white * gloss: matt *to touch: 0.5-1 hours *viscosity: 100 ku *solid content:53% *voc: ín47 g/l 1l drum; 5l drum; 18l drum
Full matt paint film, Excellent mildew resistance, algae resistance and health. Strong adherence performance Water resistance and breathe freely, Lasting light color, strong tarnish resistance, Outstanding hiding and coverage, smooth feeling, Easy application and rapid drying speed, 80000 times for scrub resistance. Method * surface preparation: the grease, dust, moisture, rust on the bonding surface must be cleaned off. Make sure that the surface must be dry during rainy days, or it will cause non-stick atmosphere. * mix well before painting, plus proper clean water for diluting and mix well. * stop application when temperature is below 8 celsius * proposed painting 2 times and recoat interval should be over 2 hours (depend on touch dry). * application tools: brush, roller, and spray *consumption: the theoretical value - 8 to 12 m2 / time/kg (the thickness dry coating film is 30 microns) (actual consumption may vary due to different construction method, dryness and hardness level of the base surface, roughness and construction environment) Attention Shelf life: 24 months in sealed cans. Storage condition: keep it out of touch of children, store in cool, dry and ventilated place. The storing temperature shall range 5-35 celsius, Thinned paint should not be poured back to the original can. Technical index: This product conforms to china national mandatory standard:gb/t9756-2001 *appearance: white viscous liquid *solvent type: water-base *color: white * gloss: matt *to touch: 0.5-1 hours *viscosity:100 ku *solid content:59% *voc: ín47 g/l 1l drum; 5l drum; 18l drum
Soda ash light / dense 99.2% sodium bicarbonate caustic soda flakes 99% sodium sulphate anhydrous (ssa) 99% sodium sulphite flakes (ssf) 60% sodium metabisulphate hydrogen peroxide (h2o2) 50% formic acid 85% glacial acetic acid paraffin wax liquid paraffin (white oil) lp 100 menthol crystal fumed silica deg (di ethylene glycol) mono ethylene glycol (meg) poly ethylene glycol (peg), base oil 150n, bs 150, 600n bitumen 60/70 rpo (rubber process oil) lioh (lithium hydroxide) hco (hydrogenated castor oil) 12 hsa (hydroxy stearic acid) ferrous sulphate heptahydrate additive for lubricating oil aromatic chemicals.Exporting of chemicals & other products
Chlorinated rubber green asphalt paint is a one-component chlorinated rubber acrylic asphalt paint composed of chlorinated rubber resin, asphalt, plasticizers, pigments, additives and solvents. It is with good adhesion to steel, concrete and wood, and dries very fast. The coating application can be performed at low and high temperatures. It is suitable for anti-corrosion of the underwater parts of boats and underground pipelines. Advantages of Chlorinated Rubber Asphalt Paint for Wood Excellent anticorrosive and shielding property. Resistance to mechanical abrasion; fast drying. Good workability Specification of Chlorinated Rubber Asphalt Paint Type Solvent Solid Content 54% Mixing Ratio one component Dry Film Thickness 50 m per coat Specific Gravity 1.35 kg/Liter Coverage Rate (Theoretical) 0.13kg/m2/50 m  Drying Time Temperature 10 20 30 Dry to touch 25mins 20mins 15mins Dry Hard 5.5hrs 4hrs 3.5hrs Package 20kgs What china paint is used for the bottom of the wooden boat? Chlorinated rubber road marking paint is formulated with chlorinated rubber, asphalt, organic solvents and additives. It has excellent water resistance and anti-corrosion properties and can protect the bottom of wooden ships from corrosion by microorganisms in the water for a long time.
FUXI ® CHLOROSULFONATED POLYETHYLENE PAINT Chlorosulfonated polyethylene is prepared by chlorinating and sulfonating polyethylene from the mixed gas of chlorine and sulfur dioxide, which has ozone resistance, weather resistance and anti-aging properties. Excellent acid and alkali resistance, good mechanical properties, good water and oil resistance, cold resistance, humidity and heat resistance, and chemical resistance. Types of FUXI �® Chlorosulfonated Polyethylene Paint Chlorosulfonation Polyethylene Anticorrosive Finish Chlorosulfonation Polyethylene Anticorrosive Intermediate Paint Chlorosulfonation Polyethylene Anticorrosive Primer Acrylic Modified Vinyl Perchloride Anticorrosive Finish Vinyl Perchloride Primer Vinyl Perchloride Putty The Advantages of Chlorosulfonated Polyethylene Paint Good ozone resistance Good weather and aging resistance Excellent chemical resistance Good mechanical properties Good water and oil resistance Single component, easy to apply Technical Parameter of Chlorosulfonated Polyethylene Paint Primer Universal Technical Parameters Type: Solvent type Packs: Two packs Mixing Ratio: 10:1 Solid Content by weight: 40% Density: 1.15-1.3KG/L Touch Dry: 30mins Hard Dry: 5 hours Best used for area with requirement of chemical resistance, water resistance Now the price of polyethylene floor coating is reasonable, if you want to buy the best paint for polyethylene, please contact us. If you want to know more types of polyurethane based paint, please visit our website.
Chlorinated rubber paint for boats is a long-lasting ship bottom antifouling paint formulated with chlorinated rubber, plasticizer as the base material, cuprous oxide as poisonous material and exudation aid. Chlorinated rubber antifouling paint can prevent marine attached organisms from fouling the bottom of the ship and keep the bottom of the ship clean. The paint dries quickly, is easy to apply, and has good seawater impact resistance. Chlorinated rubber boat paint is suitable for marine facilities such as ship bottoms, docks, and offshore drilling platforms to prevent marine attached organisms from fouling for a long time. Advantages of Chlorinated Rubber Antifouling Paint For Ships Long-term antifouling coatings. Effectively protect ship bottom against marine growths such as barnacle, oyster, bryozoans and algae. Quick dry in a low temperature, high durability in ordinary fouling conditions and good workability. Excellent compatibility with chlorinated rubber primer Specification of Chlorinated Rubber Antifouling Paints for Ships Type Solvent Solid Content 75% Mixing Ratio One component Dry Film Thickness 75�¼m per coat Specific Gravity 1.7kgs/Liter Coverage Rate (Theoretical) 0.21kg/m2/75�¼m  0.129L/m2/75�¼m  Drying Time Temperature 10â?? 20â?? 30â?? Dry to touch 40mins 30mins 20mins Dry Hard 6hrs 5hrs 4hrs Package 20kgs bucket What is the service life of the chlorinated marine paint for rubber? Antifouling paints have been the most effective and also a widely employed method for preventing fouling of underwater portion of ships. These paints are applied over anticorrosive coatings to remain in contact with seawater. The antifouling paints contain toxic material(s) which are constantly released from the surface of the film into the seawater at a controlled rate inhibiting the growth of fouling organisms. Chlorinated rubber paint formulations utilize cuprous oxide as the main toxic agent. It prevents fouling for periods of about 15-18 months even in Indian waters where fouling is more intense and occurs throughout the year. Now the chlorinated rubber paint price is reasonable, anything you need, please contact us. As a paints factory, we will do our best to meet all the needs of customers.
Paint paddle Stir stick Wooden stake 12" 14" 21"
Excellent foam control. Improve wetting, leveling and flow. Resist Moisture. Impart slip and gloss. Help prevent pigment seperation. Suitable for use in industrial wood coatings, interior and exterior paints, inks and overprint varnishes.
Waterborne assist non-odour. Super dirt resistance, Water resistance and breathe freely, Non-yellowing, Outstanding hiding and adhesion, 50000 times for scrub resistance. Method Surface preparation: the grease, dust, moisture, rust on the bonding surface must be cleaned off. Make sure that the surface must be dry during rainy days, or it will cause non-stick atmosphere. Mix well before painting, plus proper clean water for diluting and mix well. Stop application when temperature is below 8 celsius Proposed painting 2 times and recoat interval should be over 2 hours (depend on touch dry). Application tools: brush, roller, and spray Consumption: the theoretical value - 8 to 12 m2 / time/kg (the thickness dry coating film is 30 microns) (actual consumption may vary due to different construction method, dryness and hardness level of the base surface, roughness and construction environment) Attention Shelf life: 24 months in sealed cans. Storage condition: keep it out of touch of children, store in cool, dry and ventilated place. The storing temperature shall range 5-35 celsius, Thinned paint should not be poured back to the original can. Technical index: This product conforms to china national mandatory standard:gb/t9756-2001 Appearance: white viscous liquid Solvent type: water-base Color: white Gloss: matt To touch: 0.5-1 hours Viscosity:100 ku Solid content:57% Voc: ín 47 g/l 1l drum; 5l drum; 18l drum
Series exterior Lifespan Feature Exterior paint series 1 2 years 1.Paint film smooth and solid 2.Good weather resistance 3.Water-resistent, alkali-resistent, scrub-resistenrt 4.Good coverage ability and economically Exterior paint series 3 3 years 1. Firm tensile tenacious, glossy 2. Anti-sunshine and anti watering 3. Strong adhesion 4. Strong coverage ability, anti-site, Exterior paint series 6 5 years 1. High glossy 2. Outstanding dirt resistance, alkali resistance, 3. Outstanding water resistance, alkali resistance, 4. Outstanding coverage ability and leveling property and easy application Exterior paint series 9 More than 8 years 1. Excellent light glossy 2. Excellent anti-dirt resistance 3. Strong weather resistance 4. Strong coverage ability and good levelling property 1l drum; 5l drum; 18l drum
Chlorosulfonation Polyethylene Anticorrosive Primer Chlorosulfonated polyurethane paint is formulated with chlorosulfonated polyethylene resin, anti-corrosive and antirust pigments, fillers and additives. It has primer, intermediate paint and finish paint. The product is chemically inert, has good resistance to the atmosphere, moisture, salt, alkali, acids, oxidants and petroleum, has excellent outdoor weather resistance, and the coating film is tough and has excellent wear resistance. No need to remove the stubborn old coating during maintenance. This product is mainly used in petrochemical equipment, pipelines and other facilities that are corroded by the chemical atmosphere. It can also be used in storage tanks and other chemical equipment that are corroded by acid, alkali, and salt, and in facilities that require waterproofing such as reservoirs, water tanks, and sewage pools. Advantages OF Chlorosulfonation Polyethylene Primer Excellent corrosion resistance Good resistance to water, acid, alkali and chemicals. Good adhesion to all kinds of substrates Specification of Chlorosulfonation Polyethylene Anticorrosive Primer Type Solvent Solid Content 46% Mixing Ratio two components Part A: Part B=10:1 by weight Dry Film Thickness 50m per coat Specific Gravity 1.15kg/Liter Coverage Rate (Theoretical) 0.14kg/m2/50m 0.122L/m2/50m Drying Time Temperature 5 10 20 30 Dry to touch 30mins 20mins 15mins Dry Hard 5hrs 3.5hrs 3hrs Package 22kgs for one kit, part A 20kgs, part B 2kgs Where are the chlorosulfonated polyethylene coatings mainly used? It is mainly used for equipment, facilities, pipelines corroded by the chemical atmosphere, and storage tanks and equipment corroded by acid, alkali, and salt. It can also be used for water-proof facilities such as reservoirs, water tanks, and sewage pools. As a paints manufacturer, we will do our best to meet all the needs of customers.
Paints..
Paint.
Building paint, anticorrosion paint.
Paint, interior wall paint, exterior wall paint.
Paint & coating.
Acid and alkali salt, coating, paint.
We understand the demands of crankcase lubrication; the importance of water tolerance, of long-term bearing life, and protecting against corrosion. Bio Mileager Crank Case Oils offers protection against corrosion and wear, and the same load-bearing capabilities regardless of your geographic location.
Bio Mileager Crank Case Oil Additives are 100% herbal additives which really determine its performance properties. Bio Mileager Crank Case Oil Additives extend the viscosity range of the oil, allow it to withstand high pressures and loads, handle contaminants in the crankcase, and reduce friction for improved fuel economy.
Reduced soot and coke creation in the combustor. Sustained engine power levels. Reduced coke buildup on fuel nozzle face. Extended fuel-nozzle cleaning intervals. Reduced generation of smoke and particulates.
