Specification is 4D*51mm. The melt temperature is 110 degrees. The weight is 300kgs per bale. The manufacturer is Xiamen Xianglu.
specification is 4D*51mm. The melt temperature is 110 degrees. The weight is 300kgs per bale. The manufacturer is Xiamen Xianglu.
Our meta-aramid fabrics have excellent high temperature resistance, good dimensional stability, excellent spinnability, fire resistance and corrosion resistance. It can be widely used in steel, cement, power plants, chemicals, asphalt and other industries. The meta-aramid with good mechanical properties is a flexible polymer with higher breaking strength than ordinary polyester, cotton and nylon. It has a large elongation, soft handfeel and good spinnability. It can produce short fibers and filaments of different denier and length. It is woven into fabrics and non-woven fabrics in different textile machinery. To meet the requirements of protective clothing in different fields. It has excellent flame retardant and heat resistance. The meta-aramid has a limiting oxygen index (LOI) of more than 28, so it does not continue to burn when it leaves the flame. The flame retardant properties of meta-aramid are determined by its own chemical structure and are therefore a permanent flame retardant fiber that does not reduce or lose flame retardancy due to time of use and washing. The meta-aramid has good thermal stability and can be used continuously at 205 �° C. It can maintain high strength even at temperatures above 205 �° C. The meta-aramid has a high decomposition temperature and does not melt or melt under high temperature conditions, and carbonization starts when the temperature is higher than 370 �°C. It has stable chemical properties. The meta-aramid has excellent resistance to most chemicals, and is resistant to most high-concentration inorganic acids, and has good alkali resistance at room temperature. The meta-aramid has excellent radiation resistance. For example, under the long-term illumination of ultraviolet rays and gamma rays, the intensity remains unchanged. The interfacial aramid has excellent anti-friction and chemical resistance. After 100 times of washing, the torn strength of the fabric treated with meta-aramid can still reach more than 85% of the original strength.
production name:Citrus Fiber specifition:Citrus Fiber.Natural citrus flavor with light unique smell Solubility:100% soluble in cold water color:Off-white or light yellow powder. benifit:It has good water retention, oil retention and swellability, which can bring a full, natural and thick taste to the product, and can replace a variety of thickeners and emulsifiers. specifition:Meat, bakery, sauces &dressings, dairy, beverage, frozen food, health & wellness
copper plated CuS nylon 6 DTY conductive filaments 40D/12F for anti bacteria textiles fabrics Product Description a) thickness 40D/12F Packaging & Shipping 32 bobbins/carton, net weight 16kg/carton, dimension: 56cm*56cm*38cm By DHL/TNT/UPS/FedEx, by general air transportation, by sea Our Services Surface resistance could be customzied, from 1000ohm. FAQ a) Could shield electromagnetic wave radiation? Of course, because it possesses low resistance, could achieve to more than shielding efficiency: 35dB.
Ne12/1 50% 316L stainless steel staple fiber blended 50% para-aramid staple fiber for flame resistant high tenacity Product Description [Application]: ---Anti-static,anti-static clothing,static control(e.g. FBIC,conveyor belts,woven filter cloth) ---Conductive ---Heating,heatable clothing, flame resistant. ---Intelligent textiles ---Signal transfer,data transmission (intelligent clothing) ---Electro-magnetic shielding,Anti-radiation,radiation-protective clothing ---Make stretch and pressure sensors [Advantage]: ---Easy to process,Can be woven,knitted,sewn,etc. ---Outstanding wash resistance ---Electrostatic properties of protective clothing(EN 1149) [More]: These series blended spun yarns can be mixed with polyester,cotton,acrylic,wool,aramid etc.One or more optional. Packaging & Shipping 32 cones/carton,net weight 33.3kg/carton, dimension: 56cm*56cm*38cm By sea, by general air transportation, by DHL/TNT/UPS/FedEx express Our Services Various yarn count and content could be customized. FAQ a) Could be used for knitting touchscreen gloves? Of course, because the surface resistance of it is less than 10^3ohm, have good conductivity.
Product name: UHMWPE fiber Fineness: 20D/30/50D/100D/200D/400D/600D/800D/1200D/1600D/2000D/2400D available Density: 0.97 g/m3 Strength: >=40 g/D Modulus: >=1400 g/D Elongation: 2.8% color: white Feature: - Low density - High strength - High energy absorption - Low dielectric constant - High electromagnetic wave transmission - Low friction, - Impact resistance Application: National defense Public security Naval vessels Aviation Ocean oil Medical treatment, gymnasium, etc
Metallic Fibers Main material: Various types of iron chrome aluminum alloy Iron chrome aluminum fiber / metallic fiber Introduce: Iron-chromium alloy is an electrothermal alloy with the following characteristics: (1) High resistivity (2) Small temperature coefficient (3) Long service life (4) high surface load (5) Good oxidation resistance. Iron-Chromium-Aluminum fiber is made from iron-chromium-aluminum wire by a beam stretching process. The diameter ranges from 8 μm to 40 μm. It can be used in higher temperature environments than stainless steel fibers. It is mainly used as a raw material for manufacturing automobile exhaust gas purifiers, high temperature filter felts, burners and the like.
Titanium felt, a diffusion layer material, provides electrons between the catalyst layer and the bipolar plate or the current distributor on the anode side. Due to its three-dimensional network porous structure, high porosity, high corrosion resistance and other characteristics, titanium felt has become one of the best materials of diffusion layer in fuel cell and hydrogen production by water electrolysis. Parameters: Material: Titanium Size:1500*1200mm Thickness:0.2mm, 0.25mm, 0.40mm, 0.60mm, 0.80mm, 1.00mm, 2.0mm. Porosity:60% - 75% â?» Porosity and Size can be customized. Technological Process Pure titanium (special process)-titanium fiber (laying, sintering)-titanium fiber felt (with three-dimensional network porous structure)- Titanium felt for LGDL Features: 1. Three-dimensional grid porous structureï¼? 2. Strong corrosion resistanceï¼? 3. Optimal electrolysis performanceï¼? 4. High porosity and current densityï¼? 5. Uniform pore size distribution. Applicantion 1. Liquid/gas diffusion layer; 2. Hydrogen absorber; 3. Hydrogen-rich water dispenser; 4. Diffusion layer of hydrogen cell stack; 5. PEM hydrogen production by water electrolysis.
0.4mm thickness 60-70% porosity Titanium Sintered Fiber Felt for PEM water electrolysis Large stock, fast shipment, custom sizes can be acceptable.
G2 to G4 Synthetic Fiber Rolls
Dehaired cashmere fibre which is after industrial factory washed and carded cashmere Chinese dehaired cashmere micron 15.5mic and 16.5mic Mongolia cashmere micron 16.8micron Tibetan dehaired cashmere micron 14.5mic Tibetan dehaired yak fiber micron 18.5mic Short Recycled cashmere waste fibre Cashmere tops 44MMH white , light grey , brown color 100% Cashmere yarn 2/26nm 30%cashmere 70% merino wool blended yarn 2/26nm 10%cashmere 90% merino wool blended yarn 2/26nm 100% knitting cashmere beanie hats 100% knitting cashmere baby hats
PP Fiber-Polypropylene Fiber is made from 100% virgin PP granular, after extruding from different mould and technology, EipponCell can get 4 different types of fiber, including Monofilament form, Fibrillated Mesh form, Twisted Bunchy and Wave form with different size. These fiber can improve the reinforcement of mortar or concrete performance effectively to make them strong and protect the projects. Basic Info Model NO. 3mm-19m Acid, Alkali & Salt Resistance Extremely Strong Crack Elongation 15-20% Length 6mm/12mm/19mm etc Model Number Monofilament Use Concrete Tensile Strength 450MPa, 500MPa Min Elastic Modulus 3500MPa Elongation at Break 15%-25% Fiber Diameter 0.03+/-0.005mm Acid &Alkali Resistance High Quality Trademark YiBang Transport Package 20kg/Bag Specification 3mm-19mm Origin China HS Code 550340 Product name PP Fiber Diameter 18 microns, 34 microns Length 3mm, 6mm, 12mm, 18mm, 52mm... Tensile Strength >450Mpa (normal strength) >600Mpa (high strength) Crack Elongation 15-20% Acid & Alkali Resistance Strong
Applicable Fiber Diameter: 125um Applicable Cable Diameter: 250um , 900 um Fiber Counts: Single Stripped Length: 35.0mm Temp. Setting Step: 4 Steps Strip Temperature(HEATING TYPE): 80 C~110 C(Adjustable every10 C ) Dimensions: 92.5(L)x 46(D) x 31.5(H) mm Weight: 260g Environmental requirements: Humidity below 85% %
Prosthetic limbs Low Ankle Carbon Fiber Foot A carbon fiber foot is a type of prosthetic foot that incorporates carbon fiber materials in its construction. Carbon fiber is known for its high strength-to-weight ratio, making it a popular choice for designing lightweight and durable prosthetic components. . Carbon Fiber Foot A carbon fiber foot is a type of prosthetic foot that incorporates carbon fiber materials in its construction. Carbon fiber is known for its high strength-to-weight ratio, making it a popular choice for designing lightweight and durable prosthetic components. Here are some key features and advantages of carbon fiber feet Lightweight: Carbon fiber is exceptionally lightweight, which makes it an ideal material for prosthetic limbs. This feature reduces the overall weight of the prosthesis, making it easier for the user to walk, run, or engage in various activities. Strength: Despite its lightweight nature, carbon fiber is incredibly strong and durable. This ensures that the prosthetic foot can withstand the stresses and strains associated with regular use. Energy Return: Carbon fiber feet are designed to store and release energy during walking or running. This energy return mechanism can enhance the user's walking efficiency and reduce the effort required, leading to a more natural gait and less fatigue.
1 Physical filtering will not decay with the increase of use time and the efficiency will not decrease. 2 Small pore size between fibers, good barrier performance, able to block bacteria, viruses, pollen, pm0.3 and other substances 3 High porosity 90%, good air permeability, low resistance, reducing filter noise and energy consumption. 4 The specific surface area is large, which is about 100 times that of ordinary fiber membrane materials, and it can absorb smaller particles. Nano fiber diagram oxygen oxygen water
Production Being different from foaming materials, air fibers are made of food grade safe raw materials, which are melted and directly sprayed into water to form with 0 glue and 0 heavy metal 1 90% air space 2 Full of hole ,breathable 3 soft and high elasticity 4 no odor, no chemical foaming glue bonding, safe and environmental protection 5 easy care ,easy wash ,Mite free living space
Based on years' experience of machinery manufacturing, we designed and developed this automatic decorticator. It works well with high capacity, low labor intensity, low cost to have high-quality fiber. This automatic decorticator is suitable for different raw material such as sisal, jute, banana stem, pineapple leaf,, ramie and so on.
We have factory in Tanzania to produce standard quality sisal fiber (UG/SSUG/Tow1) and sisal yarn, also we can supply sisal decorticator from China
Hubei MHD Technology Industrial Co., Ltd. is a professional manufacturer of producing Textile Products more than 10 years. It has developed a strong comprehensive company integrating R&D,design,manufacturing and sales. Our business concept of "Quality is First,Price is Best". Please contact us for the below items: polyamide/spandex/Polypropylene/ Nylon POY/FDY/DTY yarn polyamide/spandex/Polypropylene fibre/Polyester fibre/PET bubble material/Polypropylene fibre/High strength polyester filament Diacetate tow/Polypropylene tow
