Dse5510 is an automatic engine control module, is designed to provide advanced load distribution function, used for diesel and gas turbine, including electronic and non electronic engine. The module also provides engine monitoring and protection function well.
Synchronization function of these modules including, with built-in synchronizer for automatic synchronization, and switching to non electric pump. Provide from direct and flexible output module, to allow the connection to the governor on the most commonly used and the automatic voltage regulator (avr). This module is designed to combine up to 16 generators, and 16 and up to the power of 20, in one system, for example: 16 generators and 4 electric (dse5560 must be synchronized with the power)
Unit type:piece package weight:2.000kg (4.41lb.) package size:18cm x 18cm x 18cm (7.09in x 7.09in x 7.09in)
E the internal temperature effectively.
4. Water supply system that is externally connectable, convenient for refilling water into the humidifying pot and automatically recyclable.
5.French tecumseh is used as compressor, with environment friendly refrigeration r232 or r404a
6. Lcd display screen, capable of displaying the measured value as well as the set value and time.
7. The control unit has the functions of multiples segment program editing, with quick or ramp rates control of temperature and humidity.
8. casters are provided for ease of mobility, with strong positioning screws.
Vices: fuse free switch, overloading protection switch for compressor, high and
Per set includes a electric box, a heater and a control panel
1) plug-and-play mode is to get the easy operation and easy installation.
2) three working modes: normal mode, economic mode and filter mode.
3) 24 hours clock display and setup of circulation-cleaning.
4) synchronous changing color with multiple lights and fixed color light and ozone antivirus system.
13) compatible with heat pump
14) error code hinting
The temperature range of chilled fluid is from 5
It is better to use the chiller while the ambient temperature at or belo
We reserve the right to modify the above dimensions or parameters without further notice.
We manufacture a stock range of probes to suit the hand hold thermometers and will manufacture custom assemblies to suit your applications for food, liquid, surface, air, compost and immersion temperature measurement.
Specifications:
Wide operating temperature range: -20 to 125 degree celsius
Dielectric strength: 1, 500v ac for one second
Short thermal response time in water, high stability in moisture
Suitable for use in high-temperature and moisture environments
High accuracy, different tolerance available, cost-effective
Customized specifications are welcome
Characters:
Radio frequency:433mhz
Max controlling distances:>30m
Ultra-high touch sensitive color wheel
2 audio modes
'spectrum' function
6 programmed dynamic modes
6 fixed acoustic sensitivites
Acoustic sensitivity setting on the remote control
Adjustable to any acoustic sensitivity(1-100%)
8-step speed/brightness control
'memory' function
Independent warm white, day white, cold white color
Characters:
Radio frequency:433mhz
Max controlling distances:≥30m
Ultra-high sensitive color wheel
9 programmed dynamic modes
8-step speed/brightness control
'memory' function
'auto-off' function
Independent zone on/off
Independent warm white, day white, cold white color
Rgb/rgbw output selectable via reposition jumper
Radio frequency:433mhz
Controlling distances:≥30m
Programmable(diy dynamic mode)
6 diy dynamic modes
8-step speed/brightness
'memory' function
'auto-off' function
Independent zone on/off
Independent warm white, day white,
Cold white color
Feature:
1.Use for controlling the valves of hot runner according to different sequence, supporting the use of two colors or three colors injecting molding machine
2.Control 1~30 channels solenoid valves
3.Adopt 7 inches touch screen, display the working condition on the work screen and set the parameter on the set screen.
4.Separately set the multigroup interval and working time of every channel
5.With the manul test function, separately open or close to test every channel
6.External 1/2 24v signal to trigger start
7.Trouble signal output, input and other signals are selectable
1.Temperature controller adopts japans and italian (p.I.D) programmed sensor
Internal storage, which calculates automatically.
Its precision is controlled within +1¡æ and it can save above 35% power.
2. Two sets of tubular electric heating element can use one or both.
3. Short heating of cooling time and stable temperature.
4. Electric heating can is made of stainless steel.
5. Perfect security protection and fault indication system
6.Use the advanced unit from foreign countries with long life.
7. Cad system design that is easier to handle and maintain.
Long;1100
Wide;600
High;600
Weight;110kg
Packing; standard wooden case
1.Temperature controller adopts Japans and Italian (P.I.D) programmed sensor
internal storage, which calculates automatically.
Its precision is controlled within +1¡æ and it can save above 35% power.
2. Two sets of tubular electric heating element can use one or both.
3. Short heating of cooling time and stable temperature.
4. Electric heating can is made of stainless steel.
5. Perfect security protection and fault indication system
6.Use the advanced unit from foreign countries with long life.
7. CAD system design that is easier to handle and maintain.
LONG;1100
WIDE;600
HIGH;600
WEIGHT;110KG
PACKING; STANDARD WOODEN CASE
Display type: mono stn lcd
Display color:16 shades of blue
Display size: 5.7¡± (diagonal); display area is 117.2 x 88.4mm
Number of pixels :320x240; number of 8x8 characters displayable is 40x30.
Input power: 24vdc15% ; less than 20w
Ram :512 k bytes
Cpu :32 bits risc
Battery backed memory:512 k bytes
Com1 9-pin female connector: rs232/rs485
Com2 25-pin female connector: rs232/rs422/rs485
Multi-functional port 26-pin connector to: printer or 64 external keys
Ethernet:yes
External dimensions (mm) 195(w) x 145(h) x 59.1(d)
Cut-out dimensions (mm) 185.8 x 135.8
Weight 0.81 kg
PTC thermistors current protector, also called PTC thermistor resettable fuses, protect load against over-current, overload, short circuit. No need for replacement, resume protective function after a short cooling-down time.
Ceramic PTC (positive temperature coefficient) thermistors are used instead of conventional fuses to protect load, such as motors, transformers, or electronic circuit, against overcurrent for circuit protection. PTC thermistor protector not only respond to inadmissibly high currents but also if a preset temperature limit is exceeded. PTC thermistor over-current protector limits the power dissipation of the whole circuit by increasing their resistance and thus reducing the current to a harmless residual value. In contrast to conventional fuses, PTC thermistor resettable fuses do not have to be replaced after elimination of the fault but resume their protective function immediately after a short cooling-down time.
PTC Thermistor Over-current Protector Application
It applies in the over-current overload and short circuit protection of transformers, battery charger, switches, switch power supply, adaptor, meter, instrumentation, apparatus, electronic coils, control panels, air conditioner, automotive electron, etc.
Operating Principle of PTC Thermistor for Overload Over-current Protection
The operating principle is as indicated in the following. When a circuit is in the normal status, the current through PTC is lower than the rated current and PTC thermistor protector is in the normal state with small resistance value, which will not affect the normal operation of the protected circuit. In case of some fault in the circuit and the current is greater than the rated current, the PTC thermistor protector will become hot quickly and present a high resistance state, which sets the circuit relatively "off" to protect the circuit from damage. After the fault is removed, PTC thermistor protector will automatically restore its low resistance state and the circuit will resume normal operation.
Normally, when PTC thermistor is used as an overcurrent protection component, it is preferred to select maximum operating current, maximum operating voltage and proper specifications. Furthermore such factors should be taken into consideration as the dimensions of the components, rated zero-power resistance, operating temperature range, etc.
Linear PTC Thermistor (LPTC) resistance increases with the temperature rises in linearity, displays a virtually linear positive temperature coefficient over their entire temperature range, suitable in measurement and control system, temperature compensation. As the construction material is mainly semiconductor monocrystalline silicon, also called silicon temperature sensor, silicon thermistor, sometimes referred to as silistors. As the temperature coefficient is positive, the silicon temperature sensors exhibit fail-safe operation when a system overheats. Furthermore silicon is inherently stable, so silicon temperature sensor are extremely reliable and have very long operational lifetimes. Hermetically sealed glass package, axial leaded, 2 leads, can operate in high temperature and moisture environment. Linear PTC thermistor in small dimension, tightness, convenient for automatic installation.
AMWEI Linear PTC Thermistor (LPTC) Features:
1. Silicon temperature sensors have a TK (temperature coefficinet) which is nearly constant over the complete temperature range. Temperature coefficient a25/50>=0.7%/C.
2. Excellent long term stability, annual diversification rate <=0.01C/per year, temperature drifts during the lifetime of silicon temperature sensor are negligible.
3. Thermal Time Constant: 10 seconds max in still air.
4. Operating temperature range -50C--+150C.
5. Dissipation factor 2.5--5mW/C.
6. Maximum operating current Iopr=1.0mA.
7. Rated power 10mW.
8. Resistance at 25C optional 600 ohm, 1000 ohm, 1600 ohm, 2000 ohm.
For AMWEI AM-LPTC600, AM-LPTC1000 part can be matched with Philips silicon temperature sensors part KTY84, KTY81.
Silicon temperature sensor Application:
1. Industrial automation control equipment.
2. Home appliance temperature detection and compensation.
3.Precision circuit and crystal oscillator temperature compensation.
4.Temperature compensation of silicon semi conducting devices.
5.Temperature compensation of instrumentation amplifier.
6.A/D converter temperature compensation. íñ Micro motor timing control.
7.Automobile temperature detection and control.
8.Medical equipment temperature detection and control.
9.Linear PTC thermistor applications also include transmission, engine oil and coolant, heating system, overheating protection, amplifiers, power supplies, transducers, telemetry, computers, magnetic amplifiers, thermometry, meteorology, temperature regulation and over-temperature protection.
Power ntc thermistor description
Power ntc thermistor can be a cost effective device to limit the amount of inrush current in a switching power supply or other devices when the power is first turned on. Power ntc thermistor limits surge current by functioning as a power resistor which drops from a high cold resistance to a low hot resistance when heated by the current flowing through it.
Inrush-current limiters power ntc thermistor protect circuits from undesirably high currents, suppressing high inrush current surges, while its resistance remains negligible low during continuous operation. Thanks to their low resistance in the operating state, power thermistor have a considerably lower power dissipation than the fixed resistors frequently used for this application.
Inrush current limiting power ntc thermistor application
Limiting surge current, suitable for the protection of switch mode power supply, ups power, transformers, motors, various electric heating utensil, energy saving lights, ballast, various power circuit, amplifiers, colored displayer, monitors, color tv, filament protection, etc.
Power thermistor components can also be used for the soft starting of motors, for example in vacuum cleaners with continuous currents of up to 20 a.
Inrush current limiting power ntc thermistor advantages
Low cost solid state device for inrush current supression.
Minimise line current distortion and radio noise.
Protect switches, rectifier diodes and smoothing capacitors against premature failures.
Prevent fuse from blowing in error.
Inrush current limiting power ntc thermistor features
Resin coated disk thermistor with uninsulated lead-wires.
Suitable for both ac and dc circuits up to a voltage of 265 v(rms).
Wide range of resistance, current and dimension.
Excellent mechanical strength.
Suitable for pcb mounting.
Model: TBT-10H industrial thermometer is main suitable for lab ,
Boil water, and liquid object industrial
Function:
1. With lcd display temperature;
2. Temperature range: -50c to 300c
3. Measuring accuracy: +/-1c to +/-2c
4. Specification: with a diameter of 48*49mm, tube length of 75/120/200mm
5. Battery: 1.5v;AG13, 1PCS
6. Material: abs+ stainless steel;
7. Color: black
8. CE certification
9. Packing: blister
