Wuxi yao hao metal material co. Ltd. The main stainless steel wire rope, rubber rope, plastic rope, plastic coated stainless steel wire rope, rope, wind cable wire rope, wire rope, rope and other stainless steel light. Wire rope material: sus310s, 316l, 316, 310, 304, 304l, 303, 303cu, 302, 301, 321, 202, 201, and so on. Stainless steel wire specifications:.. Commonly used 6 strands of wire rope, each by 19, 37 and 61 steel wire composition. Traditionally, two numbers are used to represent the type of wire rope, and a "1" word is added behind it to indicate a core in the middle to increase its softness. [non-standard can be customized according to customer requirements] Appearance quality: the appearance of wire, whether or not galvanized, should be required to be smooth, without breaking, twisting evenly, end is not loose, etc., the surface of a single wire shall not be sunken, rust, flattening, bruising and other defects. For smooth steel wire, to protect against corrosion and rust, the surface should be oiled. Features: stainless steel wirea. High size precision can reach + 0.01mm; b. With excellent surface quality, good brightness; c. Has excellent corrosion resistance, high tensile strength and fatigue strength; d. Chemical stability, pure steel, low inclusion content; e. Has many characteristics of high temperature resistance and long service life, durable etc., (1) stainless steel wire rope definition: with the prepared steel wire, in the machine, according to the provisions of a number of twist made of single rope, and then with 6 or 8 such shares, with fiber core, again synthesis of rope called wire rope.
800psi/pn40 Size:1/4''--3'' Investment casting Ped 97/23/ec approved Casting approved ad2000-wo
1000psi/pn63 Reduce port Size:1/4''--1'' Investment casting Blow-out proof stem Sanitary design Ped 97/23/ec approved Casting approved ad2000-wo
200PSI/PN16 Size:1/2''--3'' Investment Casting PED 97/23/EC Approved Casting Approved AD2000-WO
Wuxi Hao Yiu metal main stainless steel tubing: seamless tubes, capillary tubes, precision tubes, mirror, decorative tube pipe, welded pipe, industrial pipes, sanitary pipe, square tube, tube light, tube, rectangular tube, and so on. I produced the food inside and outside polished seamless pipe, fittings, tees, valves, elbows; low/middle-pressure boiler steel tubes, high-pressure boiler steel pipe, alloy steel tubes, oil cracking tube, geology, such as steel and other steel. Stainless steel: SUS201, 202, 301, 304, 304L, 316, 316L, 321, 309S, 310, 310S, 317L, 430, 630, 840, 904L First Mechanical construction and decorative stainless steel steel import levels are SUS201, 202ï¼? 304L, 321ï¼?316, 316L ï¼?310S ï¼?430 1, and round tube: 9.5-406.4mm thickness: 0.4-12.0 mm 2, and square: 10*10-150*150mm thickness 0.4-6.0mm 3, and moment tube: 10*20-100*200mm thickness: 0.4-6.0mm 4, and spent tube: 15.9-76.2mm thickness: 1.0-1.5mm 5, and hair fine tube: 0.2-15mm Wall thickness 0.05-1.0mm 6: specifications: Ñ?1--830mm, thickness 0.1--20mm "non-standard can be customized according to customer requirements" Second, industrial piping stainless steel standard: ASTM A312 ASTM A778 GB/T12771 material: material at the import level 201.304 304L 316 316L size: Ï?13.72~Ï?1000mm products used: chemical, petrochemical, water treatment, pulp and paper, food and sanitary equipment piping. Thirdly stainless steel, boilers, heat exchangers, condenser tube standard: ASTM A249 JIS DIN 17457 or G3463 material: material 304 304L 316 316L at the import level: Ï?13.72~Ï?1000mm products used: construction of high pressure and ultra high pressure boilers, construction of superheated steam, tubes in boiling water and superheated steam locomotive boiler tubes Lastly stainless steel seamless steel tube products according to GB GB/T14976-2002 (fluid transport stainless steel seamless pipe), GB/T14975-2002 (stainless steel seamless tubes for structures), GB/T13296-91 (stainless steel seamless tubes for boilers, heat exchangers), finished products undergo stringent testing, meeting the national standard of technical requirements. Material 321/1Cr18Ni9Ti, 304/0Cr18Ni9, 310S/0Cr25Ni20, and 316L/00Cr17Ni14Mo2, 301, 304L level of the stainless steel tube is made of imported materials made in stainless steel sheet, features: no Chlamydia trachomatis, no sand, no spots, no cracks, welds smooth. Bending, cutting, welding performance, stable nickel content, the product conforms to China GB, ASTM, Japan JIS standard of the United States!: Baoshan Iron and steel, ZhangPu. Po. Nippon Steel, Malaysia, the United States and the European Union countries.
Wuxi Yao Hao metal material Co. Ltd. the main stainless steel wire rope, rubber rope, plastic rope, plastic coated stainless steel wire rope, rope, wind cable wire rope, wire rope, rope and other stainless steel light. Wire rope material: SUS310S, 316L, 316, 310, 304, 304L, 303, 303CU, 302, 301, 321, 202, 201, and so on. Stainless steel wire rope specifications: 7 * 1, 6 * 12, 7 * 7, 7 * 19, 17 * 39, 6 * 19+1, 6 * 37+1, 6 * 61+1 etc.. Commonly used 6 strands of wire rope, each by 19, 37 and 61 steel wire composition. Traditionally, two numbers are used to represent the type of wire rope, and a "1" word is added behind it to indicate a core in the middle to increase its softness. [non-standard can be customized according to customer requirements] Appearance quality: the appearance of wire rope, whether or not galvanized, should be required to be smooth, without breaking, twisting evenly, end is not loose, etc., the surface of a single wire shall not be sunken, rust, flattening, bruising and other defects. For smooth steel wire, to protect against corrosion and rust, the surface should be oiled. Features: stainless steel wire rope A. high size precision can reach + 0.01mm; B. with excellent surface quality, good brightness; C. has excellent corrosion resistance, high tensile strength and fatigue strength; D. chemical stability, pure steel, low inclusion content; E. has many characteristics of high temperature resistance and long service life, durable etc., (1) stainless steel wire rope definition: with the prepared steel wire, in the machine, according to the provisions of a number of twist made of single rope, and then with 6 or 8 such shares, with fiber core, again synthesis of rope called wire rope. (2) kinds and uses: the classification methods of wire ropes are more, and the law of classification in different countries is different. There are many kinds of wire ropes, such as wire rope structure, twist direction, surface, application and intensity. The variety of the variety reflects the variety of the use. The twist: right twist (Z), Zuo Nian (S), interactive, interactive right twist (SZ) (ZS), with a left twist right twist (ZZ), left the same twist (SS). According to surface: there are two kinds of smooth and galvanized. Divided by intensity: that is, according to the nominal strength of the monofilament, the wire rope is divided into several grades.
Wuxi Hao Yiu metal main stainless steel plate: stainless steel bar, stainless steel sheet, stainless, stainless steel skid plate, stainless steel plating, stainless steel decorative plate, stainless plate, stainless steel plates, stainless steel grinding plates, stainless steel wire, stainless steel diamond plate, stainless steel etched plates, 2B, BA and industrial plate. Stainless steel plate: SUS310S, 201, 202, 301, 304, 304L, 309S, 310, 316, 316L, 904L, 902L, 310, 321. Specification of stainless steel plates: flat: thickness 0.3mm~160mm Surface: 1000mm*2000mm, and 1219mm*2438mm, and 1219mm*3050mm, and 1500mm*3000mm, and 1500mm*6000mm, and 1800mm*6000mm (open cut) Sheet: thickness 0.3mm~10MM width: 1000mm, 1219mm, 1500mm, 1800mm (open cut) "non-standard can be customized according to customer requirements My company has been adhering to the "quality of survival, to the integrity and development" business philosophy, the highest quality-best prices, back to old and new customers. Company products are widely used in home appliances, kitchen equipment, food, medical devices, metal hose, shipping, computer accessories, cell phone parts, machinery manufacturing, automotive parts and construction, industry and other fields. Company based on customer-oriented, customer first, honest, thought of this, take the quality as the life, pay attention to after-sale tracking service, mutual benefit, common development is our service. Your phone, fax us a bridge, your needs, that is my responsibility, look forward to serving you, create brilliance!
Wuxi Yao Hao metal material Co. Ltd. the main stainless steel wire rope, rubber rope, plastic rope, plastic coated stainless steel wire rope, rope, wind cable wire rope, wire rope, rope and other stainless steel light. Wire rope material: SUS310S, 316L, 316, 310, 304, 304L, 303, 303CU, 302, 301, 321, 202, 201, and so on. Stainless steel wire rope specifications: 7 * 1, 6 * 12, 7 * 7, 7 * 19, 17 * 39, 6 * 19+1, 6 * 37+1, 6 * 61+1 etc.. Commonly used 6 strands of wire rope, each by 19, 37 and 61 steel wire composition. Traditionally, two numbers are used to represent the type of wire rope, and a "1" word is added behind it to indicate a core in the middle to increase its softness. [non-standard can be customized according to customer requirements] Appearance quality: the appearance of wire rope, whether or not galvanized, should be required to be smooth, without breaking, twisting evenly, end is not loose, etc., the surface of a single wire shall not be sunken, rust, flattening, bruising and other defects. For smooth steel wire, to protect against corrosion and rust, the surface should be oiled. Features: stainless steel wire rope A. high size precision can reach + 0.01mm; B. with excellent surface quality, good brightness; C. has excellent corrosion resistance, high tensile strength and fatigue strength; D. chemical stability, pure steel, low inclusion content; E. has many characteristics of high temperature resistance and long service life, durable etc., (1) stainless steel wire rope definition: with the prepared steel wire, in the machine, according to the provisions of a number of twist made of single rope, and then with 6 or 8 such shares, with fiber core, again synthesis of rope called wire rope. (2) kinds and uses: the classification methods of wire ropes are more, and the law of classification in different countries is different. There are many kinds of wire ropes, such as wire rope structure, twist direction, surface, application and intensity. The variety of the variety reflects the variety of the use. The twist: right twist (Z), Zuo Nian (S), interactive, interactive right twist (SZ) (ZS), with a left twist right twist (ZZ), left the same twist (SS).
Product type:ppgi prepainted galvanized steel coil sheet Material:sgcc/ cgcc/ tdc51d/ dx51d/ dtc350gd Grade:sgcc Standardï¼?aisi, astm, jis, gb, din, bs Type:steel coil Surface:zero spangle Color:customer's requirement Thickness:0.12-1.2mm Model number:0.12-2.0mm*600-1250mm Coil weight:3-8 tons Width:requirements
Product type:ppgi prepainted galvanized steel coil sheet Material:sgcc/ cgcc/ tdc51d/ dx51d/ dtc350gd Grade:sgcc Standardaisi, astm, jis, gb, din, bs Type:steel coil Surface:zero spangle Color:customer's requirement Thickness:0.12-1.2mm Model number:0.12-2.0mm*600-1250mm Coil weight:3-8 tons Width:requirements
2000psi Full port Size:1/4''--2'' Investment casting Blow-out proof stem Locking device handle Ped 97/23/ec approved
1000psi/pn63 Full port Size:1/4''--2'' Investment casting Blow-out proof stem Locking device handle Ped 97/23/ec approved
1000psi/pn63 Full port Size:1/4''--4'' Investment casting Blow-out proof stem Locking device handle Ped 97/23/ec approved
1000psi/pn63 Full port Size:1/4''--2'' Investment casting Blow-out proof stem Locking device handle Ped 97/23/ec approved
1000PSI/PN63 Full Port Size:1/4''--4'' Investment Casting Blow-out Proof Stem Locking Device Handle PED 97/23/EC Approved
1000psi/pn63 Size:1/4''--2'' Peduce port Investment casting Blow-out proof stem Locking device handle(option) Ped97/23/ec approved Casting approved ad2000-wo
1000psi/pn63 Full port Size:1/4''--3'' Investment casting Blow-out proof stem Locking device handle Ped 97/23/ec approved
Stainless steel angle bar are available in a variety of shapes, sizes and lengths that you can choose according to you requirement. These amazing angle bars have some added features making them an ideal option to choose for construction sites and various applications.
1000PSI/PN63 Full Port Size:1/4''--3'' Investment Casting Blow-out Proof Stem Locking Device Handle PED 97/23/EC Approved
1000psi/pn63 Full port Size:1/4''--4'' Investment casting Blow-out proof stem Locking device handle Ped 97/23/ec approved
