D3 steel also knows as DIN 1.2080 and JIS SKD1, which is a 12% chrome alloy steel. JIS SKD1 steel has very high wear resistance against abrasive and adhesive wear due to the high volume of hard carbides in the steel matrix, medium toughness, dimensionally stable, high compressive strength, not secondary hardenable. D3 Steel Application 1.Highly stressed cutting 2.Punching tools for thin sheet 3.Blanking and forming dies 4.Forming rolls 5.Drawing and deep drawing tools 6.Slitting Knife 7.Stone processing tools 8.Pressure pads 9.Thermosetting plastic molding D3 Steel Round Bar Sheet Plate Heat Treatment Heat Treatment SKD1 steel requires hardening and tempering to achieve maximum properties. For maximum accuracy, the parts of SKD1 tool steel should be stress relieved after roughing operations. Stress should be relieved at 648 C (1200 F) for one hour and cooled slowly. Annealing Annealing of SKD1 steel needs to be done in a controlled atmosphere furnace. D3 steels should be heated thoroughly to 871 C (1600 F) and cooled slowly at a rate of not more than -6 C (20 F) per hour, until the furnace is black. Then the material should be removed and air cooled. Tempering The SKD1 steel should be cooled to room temperature and should be tempered immediately. The parts should be placed in the tempering furnace and increased slowly to the desired tempering temperature. Tempering for 1 hour per inch of thickness is required. Hardening SKD1 steel should be heated properly since it is very sensitive to overheating and if not heated maximum hardness cannot be achieved. The work should be directly placed in a furnace preheated to 954 C (1750 F) and soaked for 20-25 minutes, plus 5 minutes per inch of thickness, and then oil-quenched to harden it. Notice Other specifications are determined by daily stock. Customization is also acceptable. We are a professional special steel stockist and supplier with a high-quality stand for many years. Please contact us for any request of D3 tool steels materials. Songshun Steel always with you.
Heat Treatment DIN 1.2379 steels alloy should be preheated very slowly to 815 (1500 F) and the temperature can be increased to 1010oC (1850 F). Then held at 1010oC (1850 F) for 20 to 45 minutes and air-cooled (air quenched). Annealing Annealing of 1.2379 tool steels material should be done at 871 to 898 C (1600 to 1650 F) followed by slow furnace cooling at 4.4 C (40 F) per hour or less, after which cooling rate could be increased. At the same time, must do something to prevent excessive carburization or decarburization. Stress Relieving Heat it slowly to 1050 -1250 F, allow to equalize, and then cool in still air(Strain Relieving) Preheat Prior To Hardening Preheat slowly to 1350 -1450 F and hold at this temperature until steel 1.2379 steel material is uniformly heated. Hardening After thorough preheating, heat to 1800 -1850 F. Hold it at the hardening temperature until it is completely and uniformly heated. Quenching DIN 1.2379 steel tool material is an air hardening steel and will develop hardness on cooling in still air. To avoid scaling and prevent decarburization on the surface, controlled atmosphere or vacuum furnaces are recommended. Parts should be allowed to cool to 150F, or to where they can be held in the bare hand, and then temper immediately. Tempering The tempering temperature on material 1.2379 steel may be varied according to the desired hardness. 1.2379 steels can be tempered at 204 C (400 F) for achieving Rockwell C hardness of 61 and at 537 °C (1000 F) for a Rockwell C hardness of 54. Compare Chinese Cr12Mo1V1 steel, American D2 steel, Japanese SKD11 steel, the chemical composition of them is the same, but the performance is very different. After heat treatment, the color of Cr12Mo1V1 is a little orange-red, and the deformation would be large. It is easy to fracture during use. And the hardness of D2 steel is higher than SKD11 steel, but the toughness is not better than SKD11 steel. SKD11 steel is light and smooth, with the best overall performance. D2 Steel Forging Heating for forging of AISI D2 tool steel should be done slowly and uniformly. Soak through at 1850 -1950 F and reheat as often as necessary, stopping work when the temperature drops below 1700 F(926 C). After D2 mold steel forging, cool slowly in lime, mica, dry ashes or furnace. D2 steel should always be annealed after forging. Songshun specialized in Special Steel for almost 20 years. We can supply mold steel, high speed steel, alloy steel, free cutting steel and etc.Welcome your contact 24 hours a
D2 steel round bar and plate can be used to produce cold work mold with a large cross-section, complex shape, high impact force, and high wear resistance. It also is called DIN 1.2379 and JIS SKD11 steel. It is a high-carbon and high-chromium cold work mold steel. It is widely used in the world. It has high hardenability and the high-temperature oxidation resistance is good. The anti-corrosion ability is good after quenching and polishing, and the deformation is small after the steel heat treatment. D2 Steel Application 1.2379 steel is used for blanking or forming dies, thread rolling dies, shear knives, food-processing knives, gauges, punches and etc. AISI D2 Steel Round Bar Plate Sheet Supply We have our own cutting and processing equipment. Specifications can be cut and customized according to your requirements. We are a professional special steel stockist and supplier with a high-quality stand for many years. Please contact us for any request of D2/1.2379 steels materials. Songshun Steel always with you. Songshun specialized in Special Steel for almost 20 years. We can supply mold steel, high speed steel, alloy steel, free cutting steel and etc.Welcome your contact 24 hours a day!!!
Product Name Stainless steel plates /sheets Surface Finish 2B, BA, NO.1, NO.4, 8K, HL, Embossing, Satin, Mirror, ect Standard JIS/SJIS/SUS/GB/DIN/ASTM/AISI/EN Technique Cold Rolled, Hot Rolled Steel Grade 200 series: 201 202 300 series: 301 304 304L 309 310 310s 316 316L 321 400 series: 409 410 410S 420 430 439 443 Thickness 0.3-4mm cold rolled; 3-16mm hot rolled; 16-100mm hot rolled; Customized according to customer requirements Length 2000mm, 2438mm, 2500mm, 3000mm, 6000mm or as required Width 1000mm, 1219mm, 1240mm, 1500mm, 1800mm, 2000mm Color Golden, Black, Sapphire Blue, Brown, Rose Gold, Bronze, Silver, ect Processing Type Cutting, bending,stamping,welding,cnc machining Cutting Type Laser cutting;water-jet cutting;flame cutting Application Interior Exterior decoration, Architectur; Evevator; Kitchen, Ceiling, Cabinet, Advertising nameplate, Roof structure,Shipbuilding Lead Time 7-15 working days after the receipt of 30% deposit Payment Terms 30% TT in advance, 70% TT at sight balance before shipment Packing Wooden Pallet or according to customer's requirements
Product Name Stainless Steel Coil Width 3mm-2000mm or as required Length As required Thickness 0.1mm-300mm or as required Technique Hot rolled / cold rolled Standard AISI,ASTM,DIN,JIS,GB,JIS,SUS,EN,etc. Surface Treatment 2B,BA,8KMirror,Drawing HL,N Titanium plating,Etching,Embossing Material 201, 202, 301, 302, 303, 304, 304L, 304H, 310S, 316, 316L, 317L, 321,310S 309S, 410, 410S,420, 430, 431, 440A,904L Application It is widely used in high temperature applications, medical devices, building materials, chemistry, food industry, agriculture, ship components. It also applies to food, beverage packaging, kitchen supplies, trains, aircraft, conveyor belts, vehicles, bolts, nuts, springs, and screen. Shipment time Within 7-15 workdays after receiving deposit or L/C Export packing Waterproof paper, and steel strip packed. Standard Export Seaworthy Package.Suit for all kinds of transport,or as required
Product Name Stainless Steel Strip, Stainless Steel Band, Stainless Steel Strap Grade 201/202/301/303/304/304L/316/316L/321/310S/401/409/410/420J1/420J2/430/439/443/444/2205/2507 Surface Finish 2B, BA, NO.1, NO.4, 8K, HL, Embossing, Satin, Mirror, ect Standard JIS/SUS/GB/DIN/ASTM/AISI/EN Technique Cold Rolled; Hot Rolled Thickness 0.3-4mm cold rolled; 3-16mm hot rolled; Customized according to customer requirements Width 10-600mm Application Interior/Exterior decoration; Architectur; Evevator; Kitchen; Ceiling; Cabinet; Advertising nameplate; Roof structure;Shipbuilding Lead Time 7-15 working days after the receipt of 30% deposit Payment Terms 30% TT for deposit,70% TT /70% LC at sight balance before shipment Price Terms FOB, EXW, CIF, CFR Packing Wooden Pallet or according to customer's requirements
Type : Steel Flat Bar Standard : STM, AISI, EN, DIN, JIS, GB Grate : A36, S235jr, St37-2, SS400, Q235, Q195 Technique : hot rolled, slitted, round edge Size ; Width Thickness Length : 10-200mm 1.5-30mm 6m, 9m, 12m or to order OEM : yes Tolerance : As the standard or your requirement Application : Construction/Shipbuilding/Machinery manufacturing/Steel structure Features 1. High quality Features 2.High dimensional accuracy 3. High utilization rate of material 4. Saving cost price Packing Details 1. Iron sheet in both ends 2.All wrapped packing with plastic woven bag 3.Loose package 4.As the requirement of customer.
Product Name Stainless Steel Flat Bar / Rod Material 201/202/304/304L/316/316L/321/410/420/430/440C/S31803/S38815/S30601etc. Specifications Round bar Diameter: 3mm~800mm Angle bar Size: 3mm*20mm*20mm~12mm*100mm*100mm Square bar Size: 4mm*4mm~100mm*100mm Flat bar Thickness: 2mm~100mm ; Width: 10mm~500mm Hexagonal bar Size: 2mm~100mm or as per customerâ??s request. Technique cold rolled & hot rolled & COLD Drawn, Polish Surface acid pickling/Mirror polish/Color coating/Brushed/Common polishing Standard ASTM AISI EN DIN GB Packing Standard export packaging or as per customerâ's request
Product Name Stainless steel hexagonal steel Material 201ã??202ã??301ã??302ã??303ã??304ã??304lã??316ã??316lã??321ã??309sã??310sã??317lã??321ã??347ã??904l etc Type Round,square,hexagonal,flat,angle Surface Pickled,Black,Bright,Polishing,Blasting,etc Round bar 3mm~800mm Angle bar 3mm*20mm*20mm~12mm*100mm*100mm Square bar 4mm*4mm~100mm*100mm Flat bar Thickness: 2mm~100mm,Width: 10mm~500mm Hexagonal 2mm~100mm Length 6m,5.8m,12m or as required Application chemical industry, shipping industry, manufacturing industry, construction,decorate Industry, electric power, pump shafts,sanitary wares ,furniture handles,boiler, high temperature resistant,low temperatureresistant, corrosion resistant. Tips The sizes or thicknesses of stainless steel bars can be customized, if you need additional information, please donâ??t hesitate to contact us at any time.
Product Name Stainless Steel Bar Material 200 Series 300Series 400Series Type Round,square,hexagonal,flat,angle Surface Pickled,Black,Bright,Polishing,Blasting,etc Round bar 3mm~800mm Angle bar 3mm*20mm*20mm~12mm*100mm*100mm Square bar 4mm*4mm~100mm*100mm Flat bar Thickness: 2mm~100mm,Width: 10mm~500mm Hexagonal 2mm~100mm Length 6m,5.8m,12m or as required Application chemical industry, shipping industry, manufacturing industry, construction,decorate Industry, electric power, pump shafts,sanitary wares ,furniture handles,boiler, high temperature resistant,low temperatureresistant, corrosion resistant. Tips The sizes or thicknesses of stainless steel bars can be customized, if you need additional information, please don�¢??t hesitate to contact us at any time.
Product name Angle bar Thickness 3~24mm or customer's requirements Width 20~200mm or customer's requirements Length 6~6.1 Meters or as customer's requirements Standard ASTM A53/ASTM A573/ASTM A283 GB/T706-2008, GB/T706-2016 DIN17100-80, JISG3192-94 Material Q195,Q215,Q235B,Q345B,S235JR/S355JR/SS400 Finished Black/Galvanized/Coated/Oiled/Painting,etc. Usage Widely used in various building structures and engineering structures, such as building beam, bridge, power transmission tower, lifiting and transporting machinery, ships, industrial furnaces, reaction towers, container racks and warehouse.
Product Name Stainless Steel Pipe/Tube Shape Round tubes, Square tubes, rectangular tubes Length As required Outer diameter Round tube: 8mm to 680 mm Square tube: 10x10mm to 300x300mm Rectangular tube: 10x20mm to 120x180mm Technique Hot rolled / cold rolled Standard AISI,ASTM,DIN,JIS,GB,JIS,SUS,EN,etc. Surface Treatment Polishing,annealing,pickling,bright Material 201, 202, 301, 302, 303, 304, 304L, 304H, 310S, 316, 316L, 317L, 321,310S 309S, 410, 410S,420, 430, 431, 440A,904L Application Decoration, Construction, Upholstery, Water supplying, handrail, railing, staircase, door, window, balcony, fence, bench, furniture etc, Shipment time Within 7-15 workdays after receiving deposit or L/C Export packing Waterproof paper, and steel strip packed. Standard Export Seaworthy Package.Suit for all kinds of transport,or as require
Product Stainless Steel coil Surface Finish 2B, BA, NO.1, NO.4, 8K, HL, Embossing, Satin, Mirror, ect Technique Cold Rolled, Hot Rolled Steel Grade 200 series: 201 202 300 series: 301 304 304L 309 310 310s 316 316L 321 400 series: 409 410 410S 420 430 439 443 Lead Time 7-15 working days
Description:Stainless Steel Sheet, Cold Rolled Stainless Steel Sheet, Hot Rolled Stainless Steel Sheet Type:201 202 304 316L 310S 309S 321 316Ti 410 420 430 409 duplex,SAF2205,S31803 Thickness:0.3-60mm Width:500-2000mm or customized Length:1000-6000 or customized Standard size:1000x2000mm, 1250x2500mm, 1219x2438mm, 1500x3000mm Surface:2B, No.1, No.4, HL, BA, 8K etc Standard: ASME, ASTM, EN ,BS,GB,DIN, JIS etc Application:Stainless steel sheet applies to construction field, ships building industry, petroleum & chemical industries,war and electricity industries, food processing and medical industry, boiler heat exchanger,machinery and hardware fields.
Grade:ASTM 303,304/L,316/L,321,316Ti, 310S,309S, 201,202,205,204+Cu,410,420,430,446 and Other as per customer's requirement Size: dia1-500mm Finish: cold drawn,peeled, bright finish Package: plastic and woven pack or wooden box Payment: TT30% down payment the balance before carrying Mill test Certificate supplied
1. SPECIFICATION: 1) Grade: AISI 304/SUS 304 / S30400 / 1.4301 2) Shape: Coil / Roll / Strip 3) Treatment: Hot Rolled and Cold Rolled 4) Surface: No.1 / 2B / No.4 / HL / Brushed / BA / 8K Mirror / Embossed / Etched etc. (With Paper or PVC film to protection) 5) Thickness Range: 0.3 - 3mm ( Cold Rolled Process ) 3 - 12mm or more (Hot Rolled Process) 6) Edge: Slit edge & Mill edge 7) Width Range: 10 - 2000mm 8) Length Range: Coil or as your request 9) Standard Size: 1000mm x coil mm 1500mm x coil mm 4' ----------1220mm x coil mm 5' ----------1524mm x coil mm Above is our normal size of 304 and 304L stainless steel coil, but are capable of shearing or custom leveling to your required lengths and widths. 10) Available Standard: ASTM, AISI, SUS, JIS, EN, DIN, GB, ASME, etc. In general, ASTM A240/A240M or as your requirements 11) Certification: MTC and SGS and Any third party inspection 12) Package: Standard Export Sea-Package (Waterproof Kraft Paper + Bundle with steel strip) 13) Brand: TISCO, BAO STEEL, BAOXIN, ZPSS, LISCO, JISCO, etc.( main mills) 14) Containers: 20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High) 40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High) 40ft HC:12032mm(Lengh)x2352mm(Width)x2698mm(High) 20' container load 25tons goods whose length is under 5.8m 40' container load 25tons goods whose length is under11.8m 2. TYPICAL APPLICATIONS: Chemical equipment and piping, heat exchanger components, dairy and food handling equipment and utensils, cryogenic vessels and components, architectural and structural applications exposed to non-marine atmospheres 3. CHEMICAL COMPOSITION: Element Carbon Manganese Sulfur Phosphorus Silicon Chromium Nickel Nitrogen Type 304 0.07% 2% 0.03% 0.45% 0.75% 17.5-19.5% 8-10.5% 0.1% ElementCarbonManganeseSulfurPhosphorusSiliconChromiumNickelNitrogenType 304.L 0.03% 2% 0.03%0.45% 0.75%18.0-20.0%8.0-12.0% 0.1% 4. MECHANICAL PROPERTIES: Type Yield Strength 0.2% offset (KSI) Tensile Strength (KSI) % Elongation(2Ã?³ Gauge length) Hardness Rockwell 304 Ann 30 min. 75 min. 40% min. HRB 92 max. 304 Hard 75 min. 125 min. 12% min. 25 -32 HRC (typical) 304 Hard 110 min. 150 min. 7% min. 32 -37 HRC (typical) 304 Hard 25 min. 70 min. 40% min. HRB 92 max. 304L Hard 75 min. 125 min. 12% min. 25-32 HRC (typical) 304L Hard 110min 150 min 6% min 32 -37 HRC (typical) 5. PROCESSING: Types 304 and 304L cannot be hardened by thermal treatment. Annealing: Heat to 1850o F to 2050 o F and cool at sufficiently high rates through 1500oF to 800oF to avoid precipitation of chromium carbides. Stress Relief Annealing: Cold worked parts should be stress relieved at 750oF for ½ to 2 hours.
Our advantage 1. Higher Quality Products 2. The corrosion resistance of forged flanges is very good 3. Shorter Production Cycle 4. More Types of Surface Treatment 5. More Cost-saving Freight Routes 6. More Comprehensive Service 7. Steel Flange Suppliers
Stainless steel hydrogen dissolving rods are a specialized material commonly used in various industries for the dissolution of hydrogen gas in liquids. The rods are made from high-quality stainless steel and designed to efficiently dissolve hydrogen gas into liquids, such as water, to produce high-purity hydrogen gas for use in a range of applications. TOPTITECh stainless steel diffusion stone is made of food-grade stainless steel material and can be used in many kinds of hydrogen water machines. Sintered integration does not fall off, and is anti-corrosion, heat-resistant, and anti-pressure. Compared with PE, stainless steel material is more durable and steady, with uniform porosity and high filtration. They can be utilized for high concentration hydrogen generators, portable home hydrogen absorption accessories, hydrogen machines, and other things. Parameters Material: Stainless steel Dimensions: 12*180mm Pore size: 20 microns Porosity: 30-50% Features High durability: Stainless steel hydrogen dissolving rods are highly durable and can withstand harsh operating conditions. Efficient hydrogen dissolution: The unique design of stainless steel hydrogen dissolving rods allows for the efficient dissolution of hydrogen gas into liquids, producing high-purity hydrogen gas for use in a range of applications. Corrosion resistance: Stainless steel is highly resistant to corrosion, which is important when working with hydrogen, as it is a highly reactive gas that can corrode many materials. This makes stainless steel a suitable material for use in hydrogen dissolution, as it can withstand harsh operating conditions and prevent corrosion. Easy to use: Stainless steel hydrogen dissolving rods are easy to use and require little maintenance, making them a cost-effective and reliable solution for hydrogen gas production.
TOPTITECh stainless steel diffusion stone is made of food-grade stainless steel material and can be used in many kinds of hydrogen water machines. Sintered integration does not fall off, and is anti-corrosion, heat-resistant, and anti-pressure. Compared with PE, stainless steel material is more durable and steady, with uniform porosity and high filtration. They can be utilized for high concentration hydrogen generators, portable home hydrogen absorption accessories, hydrogen machines, and other things. Parameters Material: Stainless steel Dimensions: 12*180mm Pore size: 20 microns Porosity: 30-50% Features High durability: Stainless steel hydrogen dissolving rods are highly durable and can withstand harsh operating conditions. Efficient hydrogen dissolution: The unique design of stainless steel hydrogen dissolving rods allows for the efficient dissolution of hydrogen gas into liquids, producing high-purity hydrogen gas for use in a range of applications. Corrosion resistance: Stainless steel is highly resistant to corrosion, which is important when working with hydrogen, as it is a highly reactive gas that can corrode many materials. This makes stainless steel a suitable material for use in hydrogen dissolution, as it can withstand harsh operating conditions and prevent corrosion. Easy to use: Stainless steel hydrogen dissolving rods are easy to use and require little maintenance, making them a cost-effective and reliable solution for hydrogen gas production. Applications Hydrogen production: Stainless steel hydrogen dissolving rods are commonly used in the production of high-purity hydrogen gas through the dissolution of hydrogen gas into water. This process is commonly used in the semiconductor, pharmaceutical, and medical industries, as well as in research laboratories. Water treatment: Stainless steel hydrogen dissolving rods are used in water treatment systems to produce high-purity hydrogen gas for use in a range of applications, such as wastewater treatment and disinfection. Chemical industry: Stainless steel hydrogen dissolving rods are used in the chemical industry to produce high-purity hydrogen gas for use in a range of chemical reactions and processes. Food and beverage industry: Stainless steel hydrogen dissolving rods are used in the food and beverage industry to produce high-purity hydrogen gas for use in a range of applications, such as food packaging and preservation. Renewable energy: Stainless steel hydrogen dissolving rods are used in renewable energy systems, such as fuel cells and hydrogen storage systems, to produce high-purity hydrogen gas for use in energy production. How does stainless steel hydrogen dissolving rods work? Hydrogen gas is introduced to the stainless steel hydrogen dissolving rod. The gas flows through the small channels or pores on the surface of the rod.
The Sintered Stainless Steel Porous Metal Filter Tube is created from irregularly-shaped stainless steel powder, typically AISI 316L. The powder is compressed into a mold, then sintered at high temperatures to form a porous tube with exceptional resistance to high temperatures, corrosion, and mechanical strain. At filtration accuracies of 70�µm or finer, particle chipping can be an issue with some filters. However, our sintered metal tube avoids this problem thanks to our advanced vacuum sintering equipment and skilled production staff. Furthermore, each sintered metal tube undergoes rigorous testing with bubble point and air permeability tests according to ISO 4003 and ISO 4022, respectively. This ensures that our filters are of the highest quality and meet the needs of every customer. Parameters: Brand: TOPTITECH Length: 50-1016mm Diameter: 4-500mm Wall thickness:1-5mm Filtration accuracy: 0.22-100um Operating temperature: 600â?? Working pressure: 3Mpa Porosity: 35%-60% All specifications can be customized. Features 1.Resistant to high temperatures up to 600â?? during normal use. 2.Strong mechanical strength and good plasticity, allowing for machining. 3.Resistant to corrosion and oxidation, suitable for use in nitric acid, sulfuric acid, dilute hydrochloric acid (5%), acetic acid, liquid hydrogen, and liquid nitrogen environments. 4.Capable of being molded according to customer drawings, with an efficient molding process. 5.Provides high filtration accuracy and effective purification. 6.Uniform pore size and stable internal structure, with no particle shedding. 7.Allows for good air permeability and easy back blow cleaning, with the ability to be repeatedly regenerated online. 8.Exhibits excellent wear and impact resistance, with strong mechanical properties. Application 1. The procedure used to produce chemical raw materials, which also includes filtering for impurities, material decarburization, and fine filtration. 2. Water treatment systems with security filtration, RO, and ultrafiltration. 3. The completed product clarity and filtration in the food and beverage industries. 4.Precious metal catalyst filtration and recovery in the petrochemical industry. 5. Precision filtering of liquid chemical industry raw materials, finished goods, and pharmaceutical intermediates. 6. Water injection filtration using reverse osmosis for security. 7.Deoiling of compressed air and gas purification of steam. 8.Medium purification and flow restriction for hydraulic fluids, lubricants, and fuels.
