High carbon silicon is a new type of alloy used in converters, and can also be called silicon-carbon alloy. It can replace ferrosilicon, silicon carbide, recarburizer, reduce the amount of deoxidizer, used in converter smelting deoxidation alloying process, the effect is stable, steel chemical composition, mechanical properties and internal control quality are better than traditional processes.
Silicon metal 441 Si:98.7%min. Fe:0.5%max. Al:0.5%max. Ca:0.3%max. Size:10-100mm,or customize In plastic woven bags of 1 mt each.
Silicon metal 441 Si:99.0%min. Fe:0.4%max. Al:0.4%max. Ca:0.1%max. Size:10-100mm,90%min or customize In plastic woven bags of 1 mt each.
100:2 two-component liquid silicone rubber belongs to condensation type mold silicone rubber. When part A and B are mixed in 100:2 weight, the crosslinking reaction can occur, and the elastic body with certain hardness is formed after curing. It has many advantages, such as good fluidity, easy to operate with low viscosity. After curing, it has heat resistance, high temperature resistance, corrosion resistance, solvent resistance, high tensile and tear strength, low linear shrinkage, high turning model times. It is a cast of gypsum, cement, POLY-RESIN, PU, AB water, ABS material of the elastic mold material, it is widely used in the production and reproduction of sludge, toys, gifts, reliefs, statues, city sculpture, cement products, hand plate, car model, model of home appliances, mold products such as soap.
--Silicone Monomer D4 Silicone Linear Body DMC Methyl Silicone Oil(0.65-1Kcs) Dow/Wacker/ShinEtsu/Chinese Methyl Silicone Oil(5K-50Kcs) Elkem High Hydrogen Containing Silicone Oil(20-30cs): Momentive/ShinEtsu/Dow ect. 107 Glue Hydroxy Silicone Oil --Amino Silicone Oil Amino Silicone Oil: Elkem C845, C910, C803 T900, T1501, T3030, T2502 Low Cyclic Amino Silicone Oil: Elkem L5040L, L1090L, L0340L --Silicone Emulsion Hydroxy Silicone Oil Emulsion: Elkem E8455 Methyl Silicone Oil Emulsion: Elkem E360, E872, E8060 Amino Silicone Oil: Elkem MEM-8031 Special Emulsion: Elkem E8786, E8840, E8680 Silicon Wax: Dow MEN-1728
Features Thermal conductivity 3.0W/(m.K), flammability UL 94-V0 Excellent electrical insulation, bonding strength13 Mpa Application temperature: -45~123, Short term: 225 Fast cure with additional heat Applications EV Battery pack; Aerospace equipments; Semiconductor, LED TV; Between any heat source and a heat sink; XK-D30L is a two-part thermally conductive adhesive, combining features of thermally conductive, electrical insulation,semi-rigid bonding and sealing. It is ease of use, long service life, suitable for automated dispensing system to improve productivity and bonding effect. XK-D25 is designed for strong bonding of metals or plastics. Better effects can be achieved when it is used together with GLPOLY bonding adjuvants. Description GLPOLY Thermally Conductive Structural Adhesives Are Designed For CTP Battery Cell Bond. Ive sorted out the materials of new energy EV CTP battery pack and found that the items concerned most by engineers were thermally conductivity, tensile strength, shear bonding strength, hardness, elongation and shelf life etc,  in addition, the fluency of dispense and fluidity of material were concerned too. The design requirements of each customer are dissimilar, but it does not matter, GLPOLY is confident of providing customized service for customers. 1. Has no equals in features of bonding strength, roughness, thermally conductive and electrical insulation; 2. Bonding strength is 30% higher than that of competitive products, withstanding impact of 12m freefall superimposing speed of 120km/h ; 3. Eliminates the need of mechanical fasten, increasing volume by 20%, reducing components by 40%, improving productivity by 50%, competitive products cant achieve these objectives; 4. Withstands 2500V at 0.28mm thick; dielectric strength is up to 14kV/mm, 40% higher than competitive products; 5. Performance degradation is less than 5% at 85 Celsius degree, RH85 for 1000 hours, and performance of PU deceases by 40% for 500 hours; 6. 25-year service life, three times longer that that competitive products; 7. Flammability UL94 V-0, when it leaves fire, it goes out; some competitive products would be burned out; 8. Cures for 13 hours at room temperature, two times faster than that of competitive products; 9. Application temperature: -45~175, short term: 250, 15% higher than that of competitive products; GLPOLY thermally conductive structural adhesive is designed for CTP battery cell bond, providing 8MPa bonding strength, and compatible with automated dispense processes.
INTRODUCTION: The series is and tear strength, 2-part liquid silicone rubber suitable for injection molding processes. FEATURES: 1. High tensile strength 2. Good rebound property 3. Outstanding resistance to ageing 4. Low shrinkage 5. Low yellowing 6. Excellent thermal and cold stability PACKAGING: It is available in 20kg pails of 200kg drums TYPICAL PROPERTY: Appearance: Transparent; Viscosity (mpas): 650,000~950,000; Hardness: 20~70 Shore A; Tensile Strength: 6.5~8.5 MPa; Tear Strength: 20~35 KN/m; Elongation at break: 330%~800%; Linear shrinkage: 0.1% REMARK: The product should be closed tightly, protected from light and moisture, the shelf life is 12 months. These figures are for reference only, please contact us for detail. ABOUT US: We are engaged in silicone rubber's R&D since 1996,there are experienced technicians and workers in our company,as well as advanced equipment.We produce almost all kinds of silicone rubber,which we believe must meet your possible requirements, no matter what you need to produce by silicone rubber. What's more,our silicone rubber are environmental-friendly production,with high safety and no toxic.You can absolutely trust your choice with us.
Brief information -- A quaternary modified softening agent with terpolymer structure and excellent hydrophilicity. -- HTcone 3206 E is very stable in acid and mild alkali condition at normal temperature while it also has excellent stability at 100degree below pH 8,which is suitable for dyeing machine and setting machine . -- Confers soft, silky and bulky hand feels to fabrics, as well as hydrophilicity while absorbency is 2 â?? 3 seconds. General properties -- Appearance: pale transparent liquid -- pH: 5 â?? 8 (1% solution at 20 degree) -- Ionicity: nonionic -- Solubility: easily soluble in water --Solid content : 53% Properties and fields of application -- Resistant to high temperature, mild alkali at normal temperature, strong electrolytes and shearing stable wihout silicone spots. -- Natural soft, smooth and non-greasy hand feels. -- Excellent hydrophilicity that exactly solves the conflict of hand feels, hydrophilicity and washing resistance. -- Suitable for various process and euqipments with high flexibility. -- Suitable for various fibres, such cotton, T/C, CVC, etc, especially best performance to cotton. -- Excellent hydrophilicity that allows direct shade repair and avoids re-pollution during the rapair. -- Better cost performance compared with softener flakes at same price, which achives performance combined softener flakes and hydrophilic silicone softeners. Application -- High concentration product and can be diluted 5-10 times. -- Padding: HT-3206E: 20 â?? 50 g/L Cure at 100degree and set at 150 â?? 180degree for 50 seconds -- Dipping: Ht-3206E: 2 â?? 5% (O.W.F) Temperature & time: 25 â?? 50degree �? 20 â?? 30 min -- Specific process should be adjusted by testing. Packing and storage -- Packing: 125 kg/polyethylene drum -- Storage: 6 months in sealed container at room temperature
Ferrosilicon is often used as deoxidizer in steel making, and it is also beneficial to improve the temperature of molten steel when it is produced with a large amount of heat during the generation of SiO2. Silicon widely used in low alloy structural steel, spring steel, bearing steel, heat-resistant steel and electrical silicon steel, silicon in the ferroalloy production and chemical industry, commonly used as a reducing agent
Silicone Sticky Roller Material: Silicone Anti-fatigue Test: 30000 times Tensile strength: 900-1400pai Elongation: 150-900% Rebound Force: 30-75% Shrinkage Factor: 2.0-4.0% Compression Set: 10-50% (22hrs/177c) Tackiness: no tackiness, low, medium, high, super high Color: Blue Size: 5mm/1"/2"/3"/4"/6"/8"/10"/12",customiszed size available for us Handle Type: Aluminum alloy, Black Plastic, ABS Handle Package: 1pc/bag,10pcs/box Application: Cleanroom, SMT, Electronics, Semi-conductors, PCB,LCD ,LED, Breadboard, Computer, Stainless Steel Sheet, Film for dusting, Glass Surface, Food & Medical & Optoelectronic Industry, Lab, Printing Circuit Board, Liquid Crystal Display etc
1.Most metallurgical silicon metal is used as an alloying agent in the aluminum industry due to its ability to increase the strength of aluminum alloys as well as to reduce its weight; 2.Metal Silicon is the raw material of ultra-pure silicon in electronic industrial, playing an important role in making electronic devices and solar cells. 3. Silicon metal is used in manufacturing a number of sorts of silicones, resins, and lubricants, silicone rubber, thereby enhancing the heat resistance, electrical insulation, corrosion resistance, water tightness and other characteristics. 2022,3033,533,411 we can supply
Where it comes from : When introducing this products, some salesmen often misleading the customers deliberately or inadvertently by saying that it is a newly designed product or a slag. Actually it is a by product comes from silicon metal plant. It deposits on the bottom of the melting furnace, and has to be cleaned out in months interval. But with technological development, the interval has prolonged from three months to six months. So the output of this product is limited. We collect and select this product from bigger Silicon metal factories all around China. 68/18,70/22,65/18 we all can supply
FeSiAl is a strong deoxidizer in producing steels and many other metals and alloys. It can effectively reduce impurities and gas elements in steel liquid, as well as remove sulfur. It also has a greater density, so the penetrability is strong. Si 18-25, Al 30-48 all can supply
Ferro Silicon Ba Inoculant all kind we can supply
We can supply all kind of FeSiMg , Mg from 4-25 , with Rare or without all can supply. if you need please kindly contact us
We Can supply all kind of ferro Silicon, if you have demand please kindly contact us ! Fellow is the main spec we can supply 1. Si 70% min, C 0.2%max, Al 2% max,S 0.04%max, P 0.02%max 2. Si 72% min, C 0.2%max, Al 2% max,S 0.04%max, P 0.02%max 3. Si 75% min, C 0.2%max, Al 2% max,S 0.04%max, P 0.02%max 4. Low Al FeSi 75% Si75 C0.2 Al0.5 S0.04 P0.02 Size:10-50 mm,10-100mm Other chemical composition and size can be supplied upon request. Also supply very good price for FeSi 65% min with fellow spec 1. Si 65% min, C 0.2%max, Al 3% max, S 0.04%max, P 0.04%max 2. Si 70% min, C 0.2%max, Al 3% max, S 0.04%max, P 0.04%max Ferro Silicon Powder: FeSi powder Si 43-47 C 0.15%max Al1.0%max S 0.035%max P0.035% max Size:50-200 mesh. Other spec and size upon client request
We can supply FeSi 65%,with very good price for fellow grade. 1. Si 65% min, C 0.2%max, Al 3% max, S 0.04%max, P 0.04%max 2. Si 70% min, C 0.2%max, Al 3% max, S 0.04%max, P 0.04%max Size:10-50 mm or 10-100mm as client need
Ferro Silicon Powder: FeSi powder Si 43-47 C 0.15%max Al1.0%max S 0.035%max P0.035% max Size:50-200 mesh. Other spec and size upon client request If you need please contact us
No siloxane volatiles High thermal performance Exellent compressibility Low hardness, conformable Electrical insulation This product is particularly suitable for silicone sensitive applications, offering low hardness, high electrical insulation and good thermally conductive.
No siloxane volatiles High thermal performance Exellent compressibility Low hardness, conformable Electrical insulation Optical precision devices Telecommunication Industrial and medical electronics Automotive ECU This product is particularly suitable for silicone sensitive applications, offering low hardness, high electrical insulation and good thermally conductive.
