Center Enamel Co., Ltd has been dedicated to the enamel industry for more than 30 years. As the most professional glass fused to steel bolted tanks manufacturer in Asia, Center Enamel has more than 200 patents of enamel frit formulas. The company owns a professional R&D Dep. with more than 60 people,set up a special laboratory, and possess independent enamel formula research ability.
The acid and alkali resistance bolted steel industrial water tanks also called glass fused to steel tanks, which combines the strength and flexibility of steel and the corrosion resistance of glass. Bolted steel industrial water tanks are assembled by Enamel sheet, Special sealant and Self-locking bolts. The enamel steel plate is coated with two layers of enamel on both sides and then burned with 900 high temperature, makes the enamel and steel plate bond together strongly. The strong bonding enamel coating not only can prevent the corrosion of industrial water tank, but also resistance to strong acid and strong alkali. Center Enamel's industrial water tanks engineering design meet or exceed AWWA D103-09 and EN/ISO28765:2011,and our industrial water tanks engineers make tank engineering calculation on each specific tank structure according to project local environmental conditions, such as snow load, wind speed, seismic zone, etc., to make sure the tank structure's adequate security in long-term service life.
The glass-lined steel wastewater treatment tanks distinguish with its good performance good corrosion resistance, with the corrosion-resistant silica glass coating on the steel panels. This is the only wastewater treatment tank finish where two materials are fused together to achieve the best of both:� the strength and flexibility of the steel combined with the corrosion resistance of the glass. The high-temperature fusion of glass to steel fired at 850 degrees results in an inert, durable finish. Center Enamel's Glass-Fused-to-Steel wastewater treatment tank has been proved internationally with service life over 30 years. Center Enamel Co., Ltd is not only the first� Glass-Fused-to-Steel Tanks� manufacturer and supplier in China but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing, and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61 and NFPA, etc. international standards.
The glass fused to steel wastewater treatment tanks distinguishes with its good performance â??good corrosion resistance, with the corrosion-resistant silica glass coating on the steel panels. This is the only wastewater treatment tank finish where two materials are fused together to achieve the best of both: the strength and flexibility of the steel combined with the corrosion resistance of the glass. The high-temperature fusion of glass to steel fired at 850-degree results in an inert, durable finish. Center Enamel's Glass-Fused-to-Steel wastewater treatment tank has been proved internationally with service life over 30 years. Center Enamel Co., Ltd is not only the first� Glass-Fused-to-Steel Tanks� manufacturer and supplier in China but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61 and NFPA, etc. international standards.
AWWA D103-09 complied glass fused to steel sludge holding tank is with superior corrosion resistance and fast in installation. Center Enamel glass fused to steel sludge holding tank is expendable and customized in color and capacity. The capacity we are capable of is minimum in 20 m3 and maximum in 20,000 m3 . Glass fused to steel sludge holding tank combines the strength and flexibility of steel and the corrosion resistance of glass. This is the combination of glass and steel to achieve the characteristics of both: superior corrosion resistance of glass, combined with flexibility and strength of steel. Center Enamel glass fused to steel sludge holding tank engineering design conform to or exceed AWWA D103-09, OSHA, and ISO/EN 28765 international standards and has more than 30 years of service life! Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61 and NFPA, etc. international standards.
ISO9001-2000 GFS Agriculture Water Storage Tank is widely used for Farm Irrigation Agriculture water storage tank is made up of glass fused steel with special sealant & self-locking bolts, which are designed for optimum energy efficiency, durability, and long-lasting performance. The Glass Fused to Steel construction of these bolted tanks is exceptional for the storage of potable water, wastewater, petroleum, chemicals, and dry bulk and in such applications, power generation stations, standpipes, frac processing, fish ponds, sludge tanks, trickling filters, high temp fermentation plants. Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing, and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61 and NFPA, etc. international standards.
Glass Fused to Steel� Leachate Storage Tanks are used to store and contain leachate, fully named as glass fused to steel leachate storage tanks.� Glass Fused to Steel� Leachate Storage Tanks combine the strength and flexibility of steel and the corrosion resistance of glass. Regular� glass fused to steel� leachate storage tanks consist of 3 parts as standard: glass fused to steel tanks, special sealant and self-locking bolts. Manholes, walkway, ladder and platform is also available for the clientâ??s option. When the composition and toxicity of leachate vary from one landfill to another landfill, one can not be too careful when storing such a volatile substance. If not properly supervised or contained, leachate can seep through the water table and into the groundwater. There are only a few tanks that have abilities to store landfill leachate, which with the variability in composition. When a project comes with leachate storage tanks, the landfill
Glass Lined Steel Liquid Storage Tanks, also known as Glass-Fused-to-Steel Liquid Storage Tanks, these names all mean the same thing. Glass Lined Steel Liquid Storage Tanks combine the strength and flexibility of steel and the corrosion resistance of glass. The high-temperature fusion of glass to steel fired at 850�°C results in an inert, durable finish. Applied to both interior and exterior, the GFS technology is able to withstand the rigors of the construction site and provide many years of trouble-free service in harsh environments. Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China, but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61 and NFPA etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 60 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition. http://www.cectank.com/bolted-steel-tanks/ http://www.cectank.com/glass-fused-to-steel-tanks/ http://www.cectank.com/biogas-storage-tanks/ http://www.cectank.com/irrigation-water-tanks/ http://www.cectank.com/potable-water-tanks/ http://www.cectank.com/industrial-wastewater-storage-tanks/ http://www.cectank.com/sludge-digester-tank-and-sludge-storage-tank/ http://www.cectank.com/leachate-tanks/ http://www.cectank.com/dry-bulk-storage-tank/ http://www.cectank.com/agricultural-water-tanks/ http://www.cectank.com/anaerobic-digesters-and-biogas-tanks/ http://www.cectank.com/drinking-water-storage-tanks/ http://www.cectank.com/fire-protection-water-storage-tanks/ http://www.cectank.com/fire-sprinkler-water-storage-tanks/ http://www.cectank.com/liquid-storage-tanks/ http://www.cectank.com/municipal-water-tanks/ http://www.cectank.com/industrial-water-tanks/ http://www.cectank.com/process-water-tanks/ http://www.cectank.com/grain-storage-silos/ http://www.cectank.com/glass-fused-to-steel-bolted-water-tanks/ http://www.cectank.com/quality-industrial-effluent-tanks/ http://www.cectank.com/emergency-fire-water-tanks-for-commercial-residential-and-institutional-facilities/
Introduction of 50000 Gallon Glass Fused To Steel Biogas Storage Tanks With Double Membrane Roof The glass fused to steel tanks is the technical and economical core element of many biogas plants all over the world. Our glass fused to steel tanks are perfectly suited for biogas storage tanks operation. Our glass-lined steel biogas storage tank is extremely resistant to corrosion and abrasion. As a perfect alternative to the red mud plastic tanks or stainless steel tanks, we always offer the best-suited material for the job - to choose glass fused to steel plate to make the tank. The Glass fused to steel plate have below features and advantages : We always dedicated to offering the best quality glass-lined steel biogas storage tanks for our clients : To assure the quality, a very strict quality control system has been executed with: 200 staffs in our quality control department and the QC control system is in accordance with the requirement of ISO9001. Moreover, 4 kinds of quality tests have been carried out from the beginning of production to delivery of the GFS tanks. Glass fused to steel biogas storage tanks application GFS tank has been widely used municipal and industrial effluent, sewage, wastewater, water treatment,biogas digester as various aerobic and anaerobic reactors of UASB, EGSB, SBR, BAF, USR, CSTR,and equalization tank, sludge holding tank, etc.
Center Enamel has established itself in bolted steel commercial water tanks and industrial water tanks for more than 30 years and promises to supply quality bolted steel commercial water tanks and industrial water tanks. Our stainless steel bolted tanks and Glass-Fused-to-Steel are ideal for industrial liquid storage. Our bolted steel commercial water tanks and industrial water tanks are made of Glass-Fused-to-Steel. Glass-fused-to-steel is the premium technology in the tank market. The enamel glass coated to the tanks forms a hard, inert barrier for both the interior and exterior tank surfaces to guard against weather and corrosion. Glass-fused-to-steel is impermeable to liquids and gas, offers excellent impact and abrasion resistance. Moreover, the color won't fade even after a lot years. Center Enamel's glass fused to steel commercial water tanks and industrial water tanks engineering design meet or exceed AWWA D103-09 and EN/ISO28765:2011, and our glass fused to steel commercial water tanks and industrial water tanks engineers make tank engineering calculation on each specific tank structure according to project local environmental conditions, such as snow load, wind speed, seismic zone etc., to make sure the tank structure's adequate security in long-term service life. Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61, API and NFPA etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 45 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.
Center Enamel has established itself in bolted steel commercial water tanks and industrial water tanks for more than 30 years and promises to supply quality bolted steel commercial water tanks and industrial water tanks. Our stainless steel bolted tanks and Glass-Fused-to-Steel are ideal for industrial liquid storage. Our bolted steel commercial water tanks and industrial water tanks are made of Glass-Fused-to-Steel. Glass-fused-to-steel is the premium technology in the tank market. The enamel glass coated to the tanks forms a hard, inert barrier for both the interior and exterior tank surfaces to guard against weather and corrosion. Glass-fused-to-steel is impermeable to liquids and gas, offers excellent impact and abrasion resistance. Moreover, the color won't fade even after a lot years. Center Enamel's glass fused to steel commercial water tanks and industrial water tanks engineering design meet or exceed AWWA D103-09 and EN/ISO28765:2011, and our glass fused to steel commercial water tanks and industrial water tanks engineers make tank engineering calculation on each specific tank structure according to project local environmental conditions, such as snow load, wind speed, seismic zone etc., to make sure the tank structure's adequate security in long-term service life. Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61, API and NFPA etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 45 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.
Introduction of 50000 Gallon Glass Fused To Steel Biogas Storage Tanks With Double Membrane Roof The glass fused to steel tanks is the technical and economical core element of many biogas plants all over the world. Our glass fused to steel tanks are perfectly suited for biogas storage tanks operation. Our glass-lined steel biogas storage tank is extremely resistant to corrosion and abrasion. As a perfect alternative to the red mud plastic tanks or stainless steel tanks, we always offer the best-suited material for the job - to choose glass fused to steel plate to make the tank. The Glass fused to steel plate have below features and advantages : We always dedicated to offering the best quality glass-lined steel biogas storage tanks for our clients : To assure the quality, a very strict quality control system has been executed with: 200 staffs in our quality control department and the QC control system is in accordance with the requirement of ISO9001. Moreover, 4 kinds of quality tests have been carried out from the beginning of production to delivery of the GFS tanks. Glass fused to steel biogas storage tanks application GFS tank has been widely used municipal and industrial effluent, sewage, wastewater, water treatment,biogas digester as various aerobic and anaerobic reactors of UASB, EGSB, SBR, BAF, USR, CSTR,and equalization tank, sludge holding tank, etc.
Center enamel supply various sizes of Dry Bulk Storage tanks which are meet all your grain storage needs, no matter indoor or outdoor storage, whether with or without hopper substructure. Our grain storage silos are food grade. The capacity of dry bulk storage silo range from 50m3 to 20,000m3, so no matter it is small or large we also can supply you, your demand is our most motivation. Center Enamel's dry bulk storage silos engineering design meet or exceed AWWA D103-09 and EN/ISO28765:2011, and our storage tank engineers make tank engineering calculation on each specific tank structure according to project local environmental conditions, such as snow load, wind speed, seismic zone etc., to make sure the tank structure's adequate security in long-term service life. Our dry bulk storage silos have been field-proven in FDA and other food applications. Our bolted steel dry bulk storage silos allow for fast and easy installation on your site regardless of weather conditions and without heavy crane equipment. About Center Enamel Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61, API and NFPA etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 60 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.
Center Enamel Co. Ltd, also known as Shijiazhuang Zhengzhong Technology Co., Ltd., is specialized in bolted steel grain storage silos. We has more than 30 years of experience in bolted steel tanks design, manufacture and installation. Bolted steel tanks have many application , such as waste water treatment, potable water supply and grain storage silos etc since 1989. The tanks are made of glass fused to steel plates and galvanized ring stiffener fixed and sealed on a concrete slab. The storage volume / capacities range from 20m3 to over 20000m3 for each tank. Specification of GFS Grain Storage Silos Category Specification Coating Color dark green, white, blue, color can be customized upon your request Coating Thickness 0.25MM - 0.40mm , double coating Acid and alkalinity proof Standard sheet PH: 3 - 11 Special sheet PH: 1 - 14 Adhesion 3450 N / cm Elastic Same as steel sheet, around 500 Kn / mm Hardness 6.0 ( Mohs ) Service life â?¥ 30 Years Holiday test > 1500 V Permeability Gas / liquid impermeable Easy to clean Smooth, glossy, inert, non adhesive Corrosion resistance Excellent. suitable for waste water treatment, sewage treatment, effluent treatment Advantage of GFS Grain Storage Silos 1. Short Construction Period : compare to over 90 days construction time of concrete tank, it takes even less than 15 days for installation of GFS grain storage silos. 2. Superior Corrosion Resistance : Center Enamel Grain Storage Silos can resist PH range of 1 - 14. 3. Long Service Life : the Center Enamel GFS Tank are design to work in a long service life as more than 30 years. 4. Tank Volume can be easily expand : GFS Grain Storage Silos are not only easy to construct, but also convenient to expand, remove and rebuild. 5. Beautiful Appearance : the color of glass fused to steel tank could be customized as per clients request based on Pantone Matching System.
Center Enamel supplies a wide range of dry bulk storage tanks to meet your grain storage needs, whether indoors or outdoors, with or without a hopper base. Our granaries are food grade. The capacity of dry bulk warehouses ranges from 50m3 to 20,000 m3. No matter the size, we can meet your needs. Your demand is our greatest motivation. Our dry bulk storage silo is designed to meet or exceed the American Waterworks Association (AWWA D103-09 and EN / ISO28765:2011, and our tank engineers make tank engineering calculations for each specific tank structure according to the project local Environmental conditions, such as snow loads, wind speeds, seismic belts, etc., to ensure a sufficiently safe long-term service life of the tank structure. Our dry bulk storage silos are field proven in FDA and other food applications. Our bolt steel dry bulk bins allow quick and easy installation on your site, regardless of weather conditions and no heavy crane equipment. About Center Enamel Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61, API and NFPA etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 60 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.
Center Enamel Co., Ltd is dedicated to providing quality bolted steel water storage tanks. Center Enamel Co., Ltd is not only the first bolted steel water storage tank manufacturer and supplier in China, but also the most experienced bolted steel water storage tank manufacturer in all of Asia. Center Enamel bolted steel water storage tank engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61 and NFPA, etc. international standards. We will strive to implement a long term and repeat relationship with our clientele, based on quality, safety, timely service and anticipation for their needs. Vitreous enamel technology advantages Center Enamel Co., Ltd has been engaged in enamel industry for more than 30 years, the most professional enamel enterprise, process more than 200 patents of enamel frit formulas Company own a professional R&D Dep. with more than 50 people,set up special laboratory, and possess independent enamel formula research ability. We will provide a professional approach to constructing exceptional quality projects which meet budget and schedule goals. With more than 30 years of development, Center Enamel bolted steel water storage tanks have been exported to more than 60 countries including the USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India, and South Africa, etc. The superior product quality and prompt service gain us worldwide recognition. Advantages of bolted steel water storage tanks Big volumes, storage capacity solutions ranging from 20CBM 8000CBM More cost-effective compared to concrete tanks: concrete tanks take a long time in construction and need bio professional installation equipment More corrosion resistant as compared to welded reservoirs Easy to transport , low freight cost: Standard green and color can be customized Installation by a trained crew of professionals. Short-term production and installation Beautiful appearance: color can be customized, it is harmonious with the surrounding landscape: concrete tanks are blank out-look appearance, can not change color according to surroundings High Performance and Hardwearing: the service life of glass fused to steel tank is more than 30 years Flexibility to Re-Model, Extend, Dismantle and Re-Site: Bolted tanks are easily transported in sizes that absolutely preclude moving other types of tanks. They can be quickly knocked down and erected at a new location without the extra costs of complete cleaning, cutting down, and rewelding.
Bolted Steel Leachate Storage Tanks Introduction Bolted Steel Leachate Storage Tanks are designed to store leachate, which is the water is being extracted from the site. Leachate is highly corrosive depending on the variability of the composition, and need tanks and containers with excellent corrosion resistance to store it. When the composition and toxicity of leachate vary from one landfill to another landfill, one can not be too careful when storing such a volatile substance. If not properly supervised or contained, leachate can seep through the water table and into the groundwater. There are only a few tanks that have abilities to store landfill leachate, which with the variability in composition. When a project comes with leachate storage tanks, the landfill operators first option is Center Enamels glass fused to steel leachate storage tanks. Center Enamel Co., Ltd is a manufacturer dedicated to enameled products since 1989. We have more than 30 years of experience in Glass-Fused-to-Steel leachate storage tanks design, manufacture, and installation. We are the largest and the most professional glass-fused - to -steel bolted tank supplier in China. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 60 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India, and South Africa, etc. The superior product quality and prompt service gain us worldwide recognition. Our company has the most advanced production line and already passed the ISO9001 - 2008 quality system certificate. Center Enamel Tanks are produced and designed confirming to AWWA D103 - 09, OSHA and can meet European standards. The center Enamel is a unique enterprise that can produce an AA grade enamel sheet now. The company owns a professional R&D department with more than 30 person laboratory, and possess independent enamel formula research ability. According to customers' different operating requirements, we can customize various products.
Bolted Steel Leachate Storage Tanks Introduction Bolted Steel Leachate Storage Tanks are designed to store leachate, which is the water is being extracted from the site. Leachate is highly corrosive depending on the variability of the composition, and need tanks and containers with excellent corrosion resistance to store it. When the composition and toxicity of leachate vary from one landfill to another landfill, one can not be too careful when storing such a volatile substance. If not properly supervised or contained, leachate can seep through the water table and into the groundwater. There are only a few tanks that have abilities to store landfill leachate, which with the variability in composition. When a project comes with leachate storage tanks, the landfill operators first option is Center Enamels glass fused to steel leachate storage tanks. Center Enamel Co., Ltd is a manufacturer dedicated to enameled products since 1989. We have more than 30 years of experience in Glass-Fused-to-Steel leachate storage tanks design, manufacture, and installation. We are the largest and the most professional glass-fused - to -steel bolted tank supplier in China. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 60 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India, and South Africa, etc. The superior product quality and prompt service gain us worldwide recognition. Our company has the most advanced production line and already passed the ISO9001 - 2008 quality system certificate. Center Enamel Tanks are produced and designed confirming to AWWA D103 - 09, OSHA and can meet European standards. The center Enamel is a unique enterprise that can produce an AA grade enamel sheet now. The company owns a professional R&D department with more than 30 person laboratory, and possess independent enamel formula research ability. According to customers' different operating requirements, we can customize various products.
Glass Fused to Steel Water Storage Tanks, also known as Glass-Lined-Steel Water Storage Tanks, is the ultimate tank solution utilising a proven product with significant advantages.After firing at 820°C-930°C high temperature, the molten glass reacts with the steel plate surface to form an inert and inorganic bond, which combines the strength and flexibility of steel and outstanding corrosion resistance of glass, so Glass-Fused-to-Steel tanks can provide many advantages over standard epoxy or welded painted storage tanks.Center Enamel is a well established, world-leading storage tanks manufacturer in China. Glass Fused to Steel Water Storage Tanks Specifications What is Glass-Fused-To-Steel ? Glass-Fused-to-Steel is a unique tank finish. Two materials are fused together to achieve the best of both materials the strength and flexibility of steel combined with the corrosion resistance of glass. Applied to both interior and exterior surfaces, Glass-Fused-to-Steel is able to provide many years of trouble free service in harsh environments. About Center Enamel Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China, but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61 and NFPA etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 60 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.
In order to prevent the damage of sludge to the environment, we need to use the sludge storage tank for sludge storage and treatment. Sludge mainly comes from sewage treatment, high organic content, perishable, smelly. Sludge including activated sludge, humus sludge, concentrated sludge, are corrosive. Glass fused to steel tank is the best choice for sludge storage. It combines the strength of steel with the excellent chemical and physical corrosion resistance of glass, with a service life of over 30 years and low maintenance requirement. Center Enamel is a well established, world-leading storage tanks manufacturer in China. What is a glass fused steel tank? Glass fused to steel tanks are assembled from glass plates and secured with self-locking bolts. Then apply sealant to the joint clearance and bolt position to improve the air tightness of the tank. Easy to install, no large installation equipment and/or highly skilled workers are required, and can also be dismantled, moved and relocated. Center Enamel was founded in 1989, with 30 years of experience in the production of enamel products, it is not only the first manufacturer to produce glass fused steel cans in China, but also the most professional manufacturer of GFS cans in Asia. Our glass fuse to steel cans have been exported to the United States, Australia, Canada, Malaysia, Indonesia, Russia, united Arab emirates, panama, India, South Africa and more than 60 countries.
