Scaffold pipe Details Scaffold pipe Our main products including pre-galvanized steel rectangular pipes, hot dipped galvanized steel round pipes, black square steel pipes, black round steel pipes, Seamless steel pipes, electrical metallic tubing, ltz window sections, aluminized coating pipes etc. Hebei sinostar is proud of its young professional and well trained team, that is full of ambition and creativity.
Introduction: The grinding ball with 7% - 10%, usually hrc 46 called medium chromium alloy ball, hardness can reach 47-55hrc. It is widely used in mining, cement and building materials, thermal power, metallurgy and chemical industry and area, big, small, Mainly used in various specifications of dry wet mill, to crush the role, is an ideal wear-resistant materials. Features: Good toughness, low abrasion, low broken rate of chromium in chromium alloy casting; -
Introduction: The grinding ball with chromium content 10%-14%, hrc 58 is popular on current market and also very economic . Chromium content 47, hrc 58 , this kind ball is called special high chromium steel ball High chrome grinding ball issuitable for the industry with high requirement on grinding fine, and high abrasion . High chrome grinding ball can increase production, and reduce consumption obviously in the cement industry. Features: Good toughness, low abrasion, low broken rate of low chromium alloy casting; low chromium ball hardness can reach 50-62hrc -
Security Fence Series PE orange fence ---------------------------------------------------------------- Detail specification Raw Material:Virgin HDPE with UV stabilized Series :BR & SR & LB & SB Mesh size: 4 kind of series 1.BR Series  70�40mm,80�40mm,100�40mm,110�40mm,70�26mm,80�26mm,90�26mm,100�26mm,110�26mm 2.SR Series  65�35mm,70�40mm,60�40mm,50�30mm,50�50mm 3.LB Series  50�50mm 4.SB Series  70�40mm,60�40mm,50�30mm,50�50mm Colors:Orange,red,yellow,green,blue,black etc. Weight:60-400g/m2 can be manufactured Width:1m,1.2m,1.22m,1.5m,1.8m etc. Length:20-100m/roll is all available Feature of PE orange fence: High strength ,Aging resistance ,Anti-corrosion, Easy to install and take down ,Re-usable, Flexible and lightweight. Application of PE orange fence: Construction sites, work sites,Open excavations, sport events, Catwalks,crowd control, Snow & sand fencing ,Hazardous walk areas , new building construction warning and restricted areas. Package of PE orange fence Usually packed in rolls in transparent plastic film bags with customer's label inside.
Fiberglass Mesh Series Applied: Stainless steel sheet,iron sheet.etc. About the Metalâ??Cornerâ??Bead may form straight side on the edge line of plaster project to fight break or chap and to protect and strengthen the most fragile part of the plaster. Its wing may enter the plaster in depth in any edge line strongly Corner bead is very important for whitewash for plaster, using it in the construction of building and the finishing of building will make construction easy and may save plenty of time. specifications Material  Galvanized sheet/ CBB--4635 Corrosion Resistant Plate CBS--4635 Thickness(mm)  0.25mm-0.60mm wing width(mm) 20x20mm,22x22mm,24x24mm,25x25mm,30x30mm Length 2400mm--3000mm
Standard Model:used in the occasion for connecting the steel bar in normal situation Different Diameter Model:used for connecting the steel bar in different diameters Flared Model:used for the steel bar which was hard to match Positive And Negative Screw Thread Model:used in the occasion when the steel bar in the two sides both can not be turned but the lengths can be adjusted. Locking Nut Model:used when the steel bar can not be turned, then it turns the splicing coupler to join the steel bar and then lock the splicing coupler with the locking nut.
1.Product parameter: The GL-12 Rebar Material Organizer & feeder Machine is widely cooperated with rebar automatic cutting,rebar upset forging,rebar thread cutting as well as thread rolling procedure,saves labor force and higher working efficiency in construction rebar mechanical splice technology .Its product design is compact,flexible and effective; and the unit size is 4m*3m*1.5m, which realizes the decomposition of the whole bundle of 16-40 rebars, the lateral displacement of the single rebar, the longitudinal fast forward, feeding and fast backward in work area and the second lateral displacement to the reservior. Use the Siemens frequency converter to regulate the moving speed. The cylinder controls the inverting and feeding of the material. The feeding speed is 0.5m/s. 2.Product features: 1.The equipment is very flexible to use and with widely scope application. The bottom bracket of GL-12 Rebar Material Organizer & Feeder Machine is detachable and equipped with adjustable anchor feet, which can adapt to different height of equipments application. The equipment adopts the design of application expansion and it is easy to combine and lengthen. It can adapt to rebars of varying length and various processing equipments as well as flexibly transmitting the rebar. The rebar material organizer is widely used in construction, expressway, nuclear power plant and other industries and applies to organizing and conveying the rebars of various specification and varying length. 2.Well-designed and efficient and durable We adopt the well-known brand motor and gear reducer to ensure product's durability. Use Siemens frequency converter to regulate the moving speed can effectively reduce the assistant machining time. The well-known brand large diameter cylinder to invert and feed is stable and durable. The specially designed turnover fixture is efficient and safe. The soft chain type collecting rack is well-adapted and capacious, and does little harm to rebar. Simple maintenance can ensure the normal operation as the simplified design can adapt to complicated processing environment, for which the purchase and use cost is low. Working Principle: Step1. Prepare rebars and use the crane to sling them on the shelf. Decompose the whole bundle of bars then can make the single ones lateral displacement. Step 2.Remove the single rebar to the working area by reversing device. The rebar can realize the the longitudinal fast forward, feeding and fast backward in this area. Step 3.Carry the rebar to the reservior through the second lateral displacement after processing and realize the storage function of rebar.
Standard taper thread couplers are designed to splice the same diameter bars where one bar can be rotated and the bar is not restricted in its axial direction.It is designed to achieve failure loads in excess of 115% of the characterisitc strength of grade 500 rebar end. Transition taper thread couplers are designed to splice different diameter bars where one bar can be roated and the bar is not restricted in its axial direction. Taper Thread Working Principle: 1.Slice up the end of the rebar; 2.Make the rebar taper thread cut by taper thread machine. 3.Connect together two taper thread end by One piece of Taper Thread Coupler. Taper thread position couplers are designed to quickly splice column sections or precision coupling of elements with multiple bars jointed over a short span, such as prefabricated elements, and the closing of small temporary openings.
Advantages: 1.Bar-break feature guarantees fully ductile elongation. 2.No reduction of the bar cross-section area. Working principle: 1.We use GQ50 rebar cutting machine to splice up the end of the rebar. 2.We use Upset Forging Parallel Thread Machine to forge the end of rebar. 3.We use Parallel Thread Cutting Machine to thread the ends of the rebar which have been forged. 4.An upsetting coupler is used to link the two ends of rebar in parallel thread. Assembly benefit: 1.No torque wrench required. 2.Assembly validated by visual inspection. 3.Manufacturing of couplers under strict quality plans. 4.Standard ISO Parallel Metric Thread design.
Seamless or Welded Specifications and Steel Grade: ASTM A312; ASTM A213; ASTM A249; ASTM A268; ASTM A269; ASTM A554; ASTM A789 GB/T 14975; GB/T 12771; GB/T 13296; GB/T 12770; GB/T 14976 TP 304; TP 304L; TP 316; TP 316L; TP 321; TP 317L; 309S; 310S Size Range: Seamless Series: OD: 6 - 762 mm; Thickness: 0.5 - 50 mm Welded Series: OD: 6 - 2600 mm; Thickness: 0.3 - 30 mm Sanitary Tubing: 1/8" - 6"
pipe fittings: 45/90/180 long/short radius elbows, concentric/eccentric reducer, equal/reduceing tee, flange, caps, coupling, etc. Size range: 1/2-72",and from1/2-24" is seamless,from26-72" is seam pipe fittings schedule: Sch5s,Sch10s,Sch10,Sch20,Sch30,STD,Sch40,XS,Sch60,Sch80,Sch100, Sch120,Sch140,Sch160,XXS Material code: 1.carbon steel A105,A234WPB,WPC;A420WPL9,WPL3,WPL6,WPHY-42/46/52/60/65/70/75 2.alloy steel A234WP1,WP11,WP12,WP22,WP5,WP9,WP91 3.stainless steel A403WP304/304L;A403WP316/316L;WP321;WP347;WPS31254, 4.duplex&double duplex stainless steel ASTM A815;UNS S31803;UNS S32750;UNS S32760,UNS S2205 Standards: ANSI,JIS,DIN,BS,ISO,GOST,ETC CE and certification ISO9001:2000,BV,SGS,LOYID Applications range: Petroleum, chemical, power, gas, metallurgy, shipbuilding, construction water and nuclear power etc. Packaging: Sea-worthy; plywood case, pallet, in bundle; or other packing strong enough to be handled and shipped. Quality: The first class The third party inspection: BV, SGS, LOIYD, TUV, and other allowed party. Delivery time: 2-7 days;at the earliest time; within the period required by the clients Price: Competitive prices Remarks: We can produce the products as well as customized shapes, sizes, lengths and specifications.
Galvalume/Aluzinc Steel, also known as hot-dip Al-Zn coated steel, is a kind of steel made of cold rolled steel with different strength and thickness as substrate. It is produced through applying Al-Zn on both faces of the substrate by hot dip process. The composition by weight ratio of each major element is 55% aluminum, 43.4% zinc and 1.6% silicon. The thickness of the products ranges from 0.12mm to 2.5mm, and the coating weight is Z30-150g/m2. Regarding the hardness (HRB), our galvalume steel has soft hard (
Asian Pearl Industry Limited can produce different specifications of electro galvanized steel coil and hot dip galvanized steel coil products. We can produce our galvanized steel coil products according to different international standards such as EN10147, ASTM-A653, JIS G3302, etc. The thickness of the products ranges from 0.105mm to 4mm, and the zinc coating weight is Z30-600g/m2. Regarding the hardness (HRB), our galvanized steel has soft hard (
Function The armor rods can protect the optical cable by preventing the vibration damper aluminum clamp from nipping directly onto the OPGW cables to cause damages of the cable. Model Our company can provide all types of armor rods with length of 400 - 1 200mm according to users' requirement or project status. Models are represented as HXT-400-** (**representing the outer diameter of the optical cable).
Used: Portal frame steel structure can be widely used in many products and industries, such as workshop plant, warehouse, office building,steel shed, aircraft hangar, carports, hotel, school, hospital, supermarket, stadium, poultry house, farm barns, etc. Our Advantages: Price advantage: Located in Hebei, the biggest steel manufacturing and processing base of China, our factory has big advantages in steel price; Professional team support: We have equipped with professional design team, experienced communicating team, supporting technical team, skilled workers to guarantee the quality and effectivement of every project; High quality material and beautiful appearance; Site engineers services; Free drawing design Technical Details: Material: Q235B, Q345B Main frame:H section steel column and beam Secondary frame: C or Z purlin Roof and wall: corrugated color steel sheet, EPS/rockwool/glass wool sandwich panels; Doors and windows: Aluminum alloy, steel or customized Accessories: anchor bolt, high strength bolts, seals, downspout,skylight panels, ventilators, etc.
stainless steelfilterdisc Stainless steel filter disc coffee disc stainless steel wire meshfilterrounddisc 1.Mesh Material :Stainless steel fine mesh 2.Thickness:0.05mm~0.5mm 3.Type:bound edge or spot- welding edge 4.Layers:single layer or multi-layers 5.Common Shape:round .Special shape can be customized Filter disc has various types Single layer without edge. Single layer with edge. Dutch weave filter disc. Spot welded edge type. Spot welded without edge type. 6.Features: Easy to use,clean and wash Reusable and never break Better for the environment No clogging.Produce a clean and delicious cup of coffee Extra fine stainless steel mesh 100% filters fine ground coffee 7.Application:mainly used for coffee machine, for example Aeropress coffee machine. 8.Common specification fits Aeropress coffee maker: Outsidediameter 6.15cm Innerdiameter 5.15cm Loopwidth 0.5cm Platethickness 0.2mm Sample Available
Application: Ornaments with elegance appearance are made by skilled craft man with ancient casting technology. Our ornamental cast steel products with top notch qualiy and reasonable price, widely used on wrought iron gates, fences, railings and many other iron works for decoration.
Food grade cold brew coffee filter tube Brief description Micron size: 300 micron, 400 micron, can be customized Sample: can be customized Features There is a filter screen welded into the top lid. Easily screw on and off Easy to clean 100% stainless steel 304
Product Description Product Name:Steel Rebar Standard & Grade HRB400, HRB400E,HRB500,etc. ASTM A615 Gr.40, Gr.60, etc. JIS G3112-SD390,SD295A,SD295B,SD345,SD390,etc BS4449-1997,460B,B500B,etc Diameter:6mm-32mm (as per customers' requirement) 6,8,10,12,14,16,18,20,25,32,mm Length: 6-12m as standard 6,9,12m Packing:standard export packing, or as per customers' requirement Surface Finished: Screw-thread Technology: Hot rolled Cold rolled Delivery time: within 30 days after received the deposite or L/C at sight Payment 1) 100% irrevocable L/C at sight. 2) 30% T/T prepaid and the balance against the copy of B/L Application: Construction, shipping, building material Packaging: Standard packing In bundles tied with steel strips. Slightly internal and external oil coating. External packing to be confirmed. Marking on each piece of tube to be confirmed. According to the customer request. Our Services 1) With professional and sufficient experience in overseas and domestic projects. 2) Work towards achieving highest standard in quality and service. 3) Clients are welcome to visit and inspect factory and production line. 4) Shipment could be guaranteed. 5) We have a strong product packaging services.
Carbon Steel Tube Bundle Code and standard: GB151
