Material:a234-wpb.A420-wpl6.A234-wp12.A234-wp11.A234-wp5.A403- wp304.A403-wp304l.A403- wp316.A403-wp316l etc. Bending radius (r): r=2d 3d 4d 5d 6d 7d 8d 9d 10d Bending angle:15o 30o 45o 60o 90o 135o 180o, also could manufacture according to the angles given by the clients. Straight length(l): the length between two ends general from 300mm-1500mm, and also can produce according to the clients' requirements. Outer diameter (d): up to d1620mm Thickness(t): up to t120mm End bevel: according to the bevel of welding pipe fittings construction. We supply good quality bend (3d, 5d, 10d). Check more detail information about bend (3d, 5d, 10d) -
Packaging & Delivery Packaging Details: standard exporting packing Delivery Detail: Commonly 20days after confirmation. Specifications Standard: ANSI B16.9/16.28,DIN 2605/2615,JIS Size:1/2"- 48" Certificate: ABS/BV/ISO/API Type: carbon steel pipe fitting Type carbon steel pipe fitting, butt weld pipe fitting ,steel pipe fitting Size 1/2"- 48" Wall thickness Sch 20- Sch 160 standard BS, JIS ,GB, ASME ,ANSI ,DIN Material Carbon steel : ASTM A106 GRB/ A53 GRB/ API 5L GRB/A335/ST37/ST52 Connection Butt-welding Applications Oil, gas, chemical industry, water conservancy, electric power, boiler, machinery, metallurgy, sanitary construction etc. Quality ISO9001 : ISO2000-Quality-Systerm has been passed . ABS ,BV. Type carbon steel pipe fitting, butt weld pipe fitting, steel pipe fitting Surface anti rust black painted, anti rust oil, galvanizing Packaging Plywood cases ,wooden pallet plastic bag or as per customers requirement Delivery time According to customers requirement Productivity 50000 T/Y Others Pipe fitting ,flanges, seamless pipe
The Slip-on flange has a low hub because the pipe slips into the flange prior to welding. Slip-On Flanges, SO Flange It is welded both inside and out to provide suffcient strength and prevent leakage.Slip-on flanges are all bored slightly larger than the O.D. of the pipe. They are preferred over welding neck flanges bu many users due to their lower intial cost, but final intallation cost is probably not much less than that of the welding neck flange because of the additional welding involved. Advantages of slip on flanges: Low cost installation Less time needed to spent on ensuring the accuracy of the cut pipe They are somewhat easier to align The slip-on flanges have low hub because the pipe slips into the flange before welding The flange is welded both inside and outside to provide sufficient strength They prevent leakage Standards, Dimensions & Weight ASME/ANSI B16.5 Class 150 SO ASME/ANSI B16.5 Class 300 SO ASME/ANSI B16.5 Class 600 SO ASME/ANSI B16.5 Class 900 SO BS 3293 Class 150 SO BS 3293 Class 300 SO BS 3293 Class 600 SO DIN 86029 PN 10 Specifications of Slip-on flange: Size: 1/2 to 60, DN 12mm to DN 1500mm . Pressure class: Class 150 to Class 2,500, PN 2.5 to PN 250 Facing: RF / RTJ Material of Slip-on flange: Cabon steel: A105, A350 LF2 Stainless steel: A182 F304/F304L/F316/F316L/F321 Alloy steel: F11, F12 Packing: plywood case and plywood pallet
Seamless or Welded Fittings Types: ELBOW, TEES, REDUCERS, CAPS, SPLIT TEE, Y TEE, BARRED TEE, STUB ENDS. ETC. Specifications and Steel Grade: CARBON STEEL: ASTM A234 WPB, WPC; ASTM A420 WPL9, WPL3, WPL6, WPHY-42, WPHY-46, WPHY-52, WPHY-60, WPHY-65, WPHY-70, ALLOY STEEL: ASTM A234 WP1, WP11, WP12, WP22, WP5, WP9, WP91 STAINLESS STEEL: ASTM A403 WP304/304L, WP316/316L, WP321, WP347 Size Range: Carbon Steel: From ½" up to 96" Stainless Steel (Seamless): From ½ up to 24" Stainless Steel (Welded): From 26" up to 72" Schedule: Carbon & Alloy Steel: SCH STD, XS, XXS, SCH 10 ~ SCH 160 and special thickness Stainless Steel: SCH 5S, 10S, 40S, 80S and special thickness Size Range(thickness): Seamless Series: OD: 10.3 - 830 mm; Thickness: 1.7 - 70 mm Welded Series: OD: 10 - 2600 mm; Thickness: 3 - 30 mm Remark: Products can be manufactured as per client's technical requirement of type, standard, dimension, wall thickness and material.
This is Shijiazhuang Bangdong Pipe Co.Ltd from China. A professional manufacturer of Carbon Steel Seamless Butt Weld Pipe Fittings as ASTM, ANSI,DIN and JIS standard. Inculding the following Items: 1. Elbow 45degree & 90degree Long Radius &Short Radius 2. Straight Tees & Reducing Tees 3. Concentric Reducers & Eccentric Reducers 4. End Caps from 1/2 inch to 72nch 5. Bend 2D 3D, 4D, 5D etc. 6. Flanges, welding neck, slip on, socket weld, threaded, lap joint, blind, spectacle, orifice, ring and long welding neck flanges. Size: 1/2 inch-72 inch Wall Thickness: SCH-5S to SCH-XXS Material: Carbon Steel-- ASTM A234 WPB, WPC; ASTM A420 WPL9, WPL3, WPL6, WPHY-42, WPHY-46, WPHY-52, WPHY-60, WPHY-65, WPHY-70, Alloy Steel-- ASTM A234 WP1, WP11, WP12, WP22, WP5, WP9, WP91 Stainless Steel-- ASTM A403 WP304/304L, WP316/316L, WP321, WP347 Standard: ASME, ANSI, JIS, DIN USE: Petroleum, chemical, power, gas, metallurgy, shipbuilding, construction, etc. Please contact us, if you have enquiry of pipe fittings. Miss Sunny
Product: PVC-U water supply pipe Product Introduce: PVC-U water supply pipe Based on health grade PVC resin as the main raw material, add non-toxic additives, processed by extrusion or injection molding. Product features: Strong corrosion resistance, acid resistance, alkali resistance. High mechanical strength. Small resistance. Health good performance. Product application: 1, Civil construction, Industrial building indoor water supply system. 2, Urban water supply pipeline system. 3, Marine aquaculture. 4, Residential area, plant area of buried water supply system. 5, Water treatment plant water piping system. 6, The botanical garden, irrigation, drilling engineering and other industrial pipe. Product specification size: Nominal pressure: 0.63Mpa, 0.8Mpa, 1.0Mpa, 1.25Mpa, 1.6MPa, 2.0Mpa. Nominal diameter DN: 20-630 - mm. Wall thickness: 2.0-35.8mm
Product Name: PVC-U drain pipe Product Introduce: PVC - U drain pipe is PVC resin as the main raw material, adding suitable amount of additives, the process such as mixing, extrusion and injection molding. Product Application: Building drainage, Life drain, Discharge of sewage, Municipal engineering and industrial and mining, enterprise many kinds of wastewater discharge system. Product Features: Good physical and chemical properties,Corrosion resistance, high impact strength, fluid resistance is small. Qualitative light and durable, convenient installation, strong to speed up the construction speed. Product specification size: Nominal diameter: 32-630 mm PVC-U drain pipe Classification: 1, Building drainage with PVC-U Rain pipes. 2, Building drainage with PVC-U Inside spin Silencing pipes
Product Name: PP-R pipe Product Introduce: Using atactic copolymerization polypropylene as raw material, by extrusion or injection molding. Product application: 1, Building hot and cold water supply system. 2, Floor heating and central air conditioning system. 3, Drinking purified water system. 4, Beverage production delivery system. 5, Coal gas and natural gas transportation system. 6, Compressed air pipe. 7, Industrial water and chemical learning medium transport emissions. Product specification size: Nominal pressure: 1.0Mpa, 1.25Mpa, 1.6Mpa, 2.0Mpa, 2.5Mpa. Nominal diameter: 20-100mm. Wall thickness: 2.0-18.3mm
Product Name: MPP Electric power pipe Product Features: 1, Excellent electrical insulation properties. 2, Has high heat distortion temperature and low temperature impact performance. 3, Tensile, compressive performance is higher than HDPE. 4, Qualitative light, smooth, small friction resistance, can be heat welded butt joint. Product Application: 1, The urban and rural trenchless horizontal directional drilling cable pipe engineering, And open excavation cable pipe engineering. 2, Urban and rural trenchless horizontal directional drilling sewage drainage pipe engineering. 3, Industrial wastewater engineering. Product specification size: Nominal diameter: 110-250 mm Note: Trenchless high-voltage power cable protection USE Modified polypropylene MPPpipe. Divided into normal and enhanced.
Product Name: SBB FRP pipe Product Introduce: FRP cable protection pipe, glass fiber as reinforcing material, and unsaturated resin bond forming. Product Features: 1, Strong resistance to pressure, light weight, smooth inner wall, small friction coefficient, wear in the cable easily, does not damage the cable. 2, Strong corrosion resistance, Insulation, Non-magnetic, Acid and alkali resistant, Flame retardant, Antistatic. 3, Bending modulus of elasticity. 4, Good water resistance. Specification size: Nominal diameter: 50-200mm. Wall thickness: 3.0-5.0mm, 5.0-10mm.
Product name: MPP Double wall corrugated pipe Product introduction: MPP single wall corrugated pipe is a polypropylene as the main raw materials, Using the reinforced composite special formula, And processing technology made of new type of structure's plastic pipe. Product Features: Light weight, high pressure resistance, good toughness, quick construction, long service life. Corrosion resistance, high insulation, the lining is smooth, small flow resistance. Special hollow ring structure. Excellent ring stiffness and good strength and Toughness. Product Application: Applicable to electric power, Communications, cable 's buried protection. Product specification size: Inner diameter: 100mm, 150mm, 175mm, 200mm.
Product Name: HDPE Winding Reinforced Pipe Product Introduce: High density polyethylene structure wall hot coil pipe is a kind of inner surface is smooth, outer wall spiral shape and strengthening, By spiral winding technology made of Special shaped structure wall pipes. Product Application: It is widely used in urban drainage, municipal drainage, electric power and petrochemical and other fields. Product specificaion size: Inside diameter: 300-3000mm
Product name: HDPE silicone core pipe PRODUCT INTRODUCE: HDPE silicon core pipe is a kind of novel composite pipe wall with silica gel mass solid lubricant. By three plastic extruding machine synchronous extrusion compound, main raw materials for high density polyethylene, core layer to the lowest friction coefficient solid lubricant silica gel quality.The widely used optical cable communication network system. PRODUCT CHARACTERISTICS: The lining of the silicon core layer is solid, permanent lubricant; The lining of the silicon core layer is pressed by synchronization in high density polyethylene pipe wall, and evenly distributed throughout the pipe wall, not peeling off. The lining of the silicon core layer and high density polyethylene with the same physical and mechanical properties; Internal friction characteristics of silicon core layer remains the same, cable in the pipe can be extracted repeatedly, blowing method, one can blow cable > 1000 m or above; The lining of the silicon core layer does not react with water, wash water pipe after an accident. PRODUCT SIZE: Cable diameter: 11-36mm Silicon pipe diameter: 24-55mm
Product Name: PVC grid pipe Product Introduce: Grid pipe Can be called a grid type plastic pipe, Grid type communication pipe, A new type of pipe products use for communication engineering. Grid pipe is polyvinyl chloride as the main raw material, match with flexibilizer, anti-aging agent and other auxiliaries, Sheath and Sub-pipe as a whole, One times extrusion molding. Product application: Use for telecom, cable TV and cable, cable with underground communication pipe. Product model and specification size: Six holes Grid pipe Five holes Grid pipe Four holes Grid pipe Nine holes Grid pipe Single holes Grid pipe
Product name: PB pipe and fittings Product Features: Light weight, easy transportation and installation. Chemical stability and durability: service life of up to 100 years . UV-ray and corrosion resistance, assuring high quality of purified water. High flow capacity with smooth surface. No leakage assurance with butt welding. Energy saving: 30% less than that of steel pipe. Easy maintenance and renovation: does not bond with concrete. Product Application: 1.Water supply pipe (health) and hot water pipe. 2.Heating pipe. 3.Air conditioning use industrial pipe. 4. Agriculture and gardening pipe, 5. Snow removal pipe. 6. Hot spring pipe. 7. Fire sprinkler system with pipe. Specification size: Outer diameter: 16-32mm. Wall thickness: 2.0-4.4mm. Nominal pressure: 1.6Mpa, 2.0Mpa, 2.5Mpa.
Product Name: MPP Single wall corrugated pipe Product introduction: MPP single wall corrugated pipe is a polypropylene as the main raw materials, Using the reinforced composite special formula, And processing technology made of new type of structure plastic pipe. Product Application: MPP single wall corrugated pipe is suitable for the power control cables, Communication cable, cable buried protection. Product Features: 1, Quality is reliable, saving cost, light weight, high ring stiffness, construction is convenient. 2, Embedded rubber sealing ring bayonet connection, Loss prevention and sealing performance is good. 3, Heat resistance, abrasion resistance, electrical insulation, at the same time at high temperature can still maintain good ability to resist external pressure. 4, Wear line performance is good. 5, Resistance to pull and withstand voltage. Product specification size: Inner diameter: 100mm. Inner diameter: 150mm. Inner diameter: 175mm. Inner diameter: 200mm.
Product name: pert pipe and fittings. Product Introduce: Polyethylene of raised temperature resistance pipes for floor radiant heating is use ethylene and octene copolymer to produce, Have With super moisture resistant, durable resistance to static strength and good impact strength. Product Application: 1, Radiant floor heating system 2, Construction of hot and cold water supply, Piping drinking water system. 3, Food industry in the beverage, wine, milk and other liquid pipelines. Specification size: Outer diameter: 16-32mm Wall thickness: 2.0-4.4mm Nominal pressure: 1.25Mpa, 1.6Mpa, 2.0Mpa.
Product name: PE composite pipe Product Introduce: Steel mesh skeleton plastic composite pipe is use wrapped around the pipe of high strength steel wire for strengthen the skeleton, outer layer with high strength polyethylene as substrate, And through the hot melt adhesive compound after continuous extrusion forming of new environmental protection pipe. Product application: Suitable for municipal Gas pipeline, Water supply, Underground drainage, sewage, etc. Building water supply and drainage. Fire and gas transport. Can be used in chemical, petroleum, electric power, medicine, metallurgy, mining and other industrial and agricultural irrigation. Product specification size and standard: Nominal diameter: DN50-DN630mm Wall Thickness: 4.5-23mm Nominal pressure: 0.8Mpa, 1.0Mpa, 1.6Mpa, 2.0Mpa.
Product name: PVC square pipe Product Features: 1, Corrosion resistant. 2, Compressive strength, acid resistance, alkali resistance. 3, Low friction coefficient, high value of utilization. PVC square application: 1, Used for water system. 2, Building materials. 3, Indoor cultivation of flowers and plants. 4, Other industrial pipe. Specification size: Long and wide custom. Thickness: 1.6-5.0mm.
Product: PE Double-wall corrugated pipe. Product Introduce: Polyethylene (PE) double-wall corrugated pipe with polyethylene as the main raw material, respectively, by inside and outside extruder extrusion, inner surface level off is smooth, the outer wall terraces corrugated, have double wall between the internal and external wall tubular layer of plastic tubing. Using range: 1, Sewage drain: Municipal engineering drainage, factories, enterprises, chemical, pharmaceutical industries. 2, All kinds of construction engineering, drainage engineering: Stadiums,Railway,High speed etc. 3, Low pressure water conveyance project: Farmland, Orchards, forestry of irrigation and drainage. 4, Ventilation and communication engineering: Mine ventilation, Mine wall permeability tube, Railway and highway cable cable, Telecommunications, protect the casing. Pipe specification index: Inner diameter: 110-800mm. Nominal pressure: SN 4( 4KN min), SN 8( 8KN min). Product performance: Nominal pressure: SN 4( 4KN min), SN 8( 8KN min). Impact on performance( TIR)/%: 10 max. Creep ratio: 4 max. Oven test: No bubbles, no separation, no cracking.
