Type Elbow Od 1/2"-48" Wt ásch40-sch160 Standard Asme, gb, din, jis Material A234 wpb, a420 wpl6, mss sp75 wphy52-70, a403 wp304(h), wp304l, wp316(h), wp316l, wp321, a234 wp5, wp9, wp11, wp12, wp22, wp91 Packaging Customized packing available (coating, end-beveling, cap etc.) Application Petroleum, áchemical, power, metallurgy, áshipbuilding, áconstructionáetc Others Special design available according to your request. Wooden case or pallet.
Standard: Asme : ansi b16.9, ansi b16.28, mss-sp-75 Din:din2605, din2615, din2616, din2617, din28011 SGP: jisb2313 En:en10253-1 en10253-2
Wall thickness area :2mm to 100mm N.D.:1/2 to24'' 24''to48''
Size:dn8--150mm(1/4 inch--6 inch) Standards: including bs en/562:197, din 2950/1629, 2999, anai/asam at97-79/b 16-3-92/b/20 and so on. Surface: galvanized or blank Packing: in container Vsage: the pipe fitting are used for the link of water, oil air, gas and other pipe line. The price is very low, and the quality is excellent. Cartons , length 470mm , width 305mm, depth 195mm
Pipe fittings
Butt-welding elbows 1) Types: seamless and butt-welded, socket, threaded elbows 2) Size: 1/2"-48" DN15-DN1200 3) Wall Thickness: SCH5S-SCH160 XXS 4) Standard: ASME, ANSI, API, JIS, DIN, BS, ISO, ANSI, JIS, GB/T12459 GB/T13401, ASME B16.9, SH3408, SH3409, HG/T21635, HG/T21631, SY/T05010 5) Material: carbon steel, stainless steel, alloy steel 6) Uses: Petroleum, chemical, power, gas, metallurgy, shipbuilding, construction, etc. 7) Special design available 8) Packing in wooden cases 9) Place of origin: China 10) Term of payment: T/Tú¼ L/C AT SIGHT
Flange 1) Type: Flat welding flange, Butt welding flange, and Blind Flange etc. 2) Material: Carbon Steel, alloy steel, and stainless steel 3) Standard: ANSI, API, ASME, ISO, BS, JPI, GB, HGJ, JB, SYJ 4) Size: 1/2í¦---48í¦ 5) Nominal Pressure: Pg=2.5, 6, 10, 16, 25, 40, 64,100,160 kg/cm2 6) Uses: Petroleum, chemical, power, gas, metallurgy, shipbuilding, construction, etc. 7) Special design available 8) Packing in wooden cases 9) Place of origin: China 10) Term of payment: T/Tú¼ L/C AT SIGHT
Tees pipe fittings 1) TYPE: straight and reducing tee and cross 2) MATERIAL: carbon steel, stainless steel, alloy steel 3) SIZE: 1/2"-48", DN15-DN1200 4) PRESSURE: Sch5-Sch160, XXS 5) STANDARDS: ISO, ANSI, JIS, DIN, GB/T12459, GB/T13401, ASME B16.9, SH3408, SH3409, HG/T21635, HG/T21631, SY/T0501 6) USE: Petroleum, chemical, power, gas, metallurgy, shipbuilding, construction, etc. 7) Special design available 8) Packing in wooden cases 9) Place of origin: China 10) Term of payment: T/T or L/C AT SIGHT
Replacement parts We offer complete range of replacement parts like wet end parts, bearing housings, frames, and pump assemblies for oem pumps sizes 1.5/1 to 14/12. Pump models include ah series, hh, sp and others. Materials offered: high chrome iron, natural rubber, urethane and others
Body W. P.:1000WOG (PN63) -3600WOG(PN250) W. T.:-20? ~200? (-4?~392?) Investment casting Blow-out proof stem Anti-static device (option) Locking device Thread type: ASTM B1.20.1 (NPT) DIN2999 & BS21 ISO7/1 & EN10226 ASME B16.10 ACCORDING TO CLIENT REQUEST.
Product Name: PVC-U Irrigation pipe Product Introduce: PVC-U Irrigation pipe Based on health grade PVC resin as the main raw material, Add quantitative stabilizer/ Lubricants/Filling agent/Toner, By plastic extruder extrusion molding and plastic injection molding machine injection molding, Through cooling and solidifying, finalize the design, testing, packaging process to produce a kind of pipe. Product Features: Fluid resistance is small. High transmission efficiency. Quality is light, easy installation and maintenance, reliable in performance. High temperature resistance, good sealing performance, long service life. Product Application: Irrigation pipe used in urban and rural areas indoor and outdoor water supply, Farmland irrigation, Salt industry halide pipeline, Aquaculture water, Mine ventilation, Water supply and drainage, Landscape irrigation and others engineering. Product Specification Size: Nominal pressure: 0.2 MPa, 0.2 5MPa, 0.32 MPa, 0.4 MPa. Nominal diameter : 75 mm, 90 mm, 110 mm, 125 mm, 140 mm, 160 mm, 180 mm, 200 mm , 250 mm, 280 mm, 315 mm.
Carbon Steel Flange ASTM A105, ASTM A350 LF1, LF2 CL1/CL2, LF3 CL1/CL2 ASTM A694 F42, F46, F48, F50, F52, F56, F60, F65, F70 Stainless Steel Flange ASTM A182 F304/304L, F316/316L, F316H, F310, F321, F44 (UNS S31254) Alloy Steel Flange ASTM A182 F1, F5a, F9, F11, F12, F22, F91 Chemical Requirements (Composition, %, max) Material Symbol C Mn P S Si Ni Cr Mo Cu N V Co ASTM A105 0.35 0.60-1.05 0.035 0.040 0.10-0.35 0.40 0.30 0.12 0.40 _ 0.08 _ ASTM A350 LF2 0.30 0.60-1.35 0.035 0.040 0.15-0.30 0.40 0.30 0.12 0.40 _ 0.08 0.02 ASTM A182 F304 0.08 2.00 0.045 0.030 1.00 8.0-11.0 18.0-20.0 _ _ _ _ _ ASTM A182 F304L 0.03 2.00 0.045 0.030 1.00 8.0-13.0 18.0-20.0 _ _ _ _ _ ASTM A182 F316 0.08 2.00 0.045 0.030 1.00 10.0-14.0 16.0-18.0 2.00-3.00 _ _ _ _ ASTM A182 F316L 0.03 2.00 0.045 0.030 1.00 10.0-15.0 16.0-18.0 2.00-3.00 _ _ _ _ ASTM A182 F321 0.08 2.00 0.045 0.030 1.00 9.0-12.0 17.0-19.0 _ _ _ _ _ EN 10025 S235JR 0.20 1.40 0.045 0.045 _ _ _ _ _ 0.009 _ _ 20Mn 0.17-0.23 0.70-1.00 0.035 0.035 0.17-0.37 0.30 0.25 0.25 20 0.17-0.23 0.60-1.00 0.030 0.020 0.17-0.37 0.25 0.25 0.25 16Mn 0.13-0.19 1.20-1.60 0.030 0.020 0.20-0.60 0.30 0.30 0.25 Mechanical Requirements Material Symbol Tensile Strength, min, MPa Yield point, min, Mpa Elongation, min, % Reduction of area, min, % Hardness, max, HB Min. Impact Average, J Test Temperature, C ASTM A105 485 250 22 30 187 ASTM A350 LF2 485-655 250 22 30 20 -46 ASTM A182 F304 515 205 30 50 ASTM A182 F304L 485 170 30 50 ASTM A182 F316 515 205 30 50 ASTM A182 F316L 485 170 30 50 ASTM A182 F321 515 205 30 50 20Mn 450 275 24 50 197 20 410 245 25 55 156
1.Size:1/2"-48"(seamless), 40"-80"(welded) 2.Wall thickness:sch5s, 10s, 40s, 80s(stainless steel);sch5sch160, xs, xxs, std (welded and seamless) 3.Type: euqal , reducing, lateral tee 4.Standard:asme sa-234, sa-420, sa-403;asme b16.9 Jis b2311, b2312, b2313 Din2605, 2615, 2616, 2617 Iso3419, iso5251 Pipe fittings can also be specially manufactured according to customers' drawings. 5.Material: astm a234 wpb, wpc, wp1, wp12, wp11, wp22, wp5, wp9, wpr, wp91 Astm a335 p1, p2, p5, p9, p11, p12, p15, p21, p22, p23, p91, p92, p122 Astm a403 wp304, wp304l, wp316, wp316l Astm a420 wpl6, wpl 9, wpl3, wpl8 Astm a860 wphy42, wphy46, wphy52, wphy60, wphy65, wphy70 6.Surface treatment:abrasive blasting, hot&cold galvanized , rust-proof oil or black painting. 7.Packing:fumigation-free wooden cases/ pallets or according to customers' requirment Port of loading: xin gang , tianjin , china. 8.Others:(1).Special design available according to requirement. (2).Anti-corrosion and high-temperature resistant. (3).The whole production process is under the iso9001:2001 strictly 9.Payment terms: 30% in advance by tt or l/c at sight 10.Delivery time: 10-40 days or according to customers' requirement
1.Butt fusion pipe fittings, 2.plastic pipe fitting,HDPE/MDPE 3.PE coupler,tee,elbow,reducer,cap end,stub end,etc. 4.GB/EN/ANSI/ASTM/ISO/ASNZS/DIN Standards 5.dimension:DN20mm - DN630mm,1/4'' - 24'' 6.SDR11/SDR13.6/SDR17/SDR21/SDR26 HDPE Fittings
1, Sewage drain: Municipal engineering drainage, factories, enterprises, chemical, pharmaceutical industries 2, All kinds of construction engineering, drainage engineering: Stadiums,Railway,High speed etc. 3, Low pressure water conveyance project: Farmland, Orchards, forestry of irrigation and drainage. 4, Ventilation and communication engineering: Mine ventilation, Mine wall permeability tube, Railway and highway cable cable, Telecommunications, protect the casing.
1:made of special synthetic rubber with excellent oil resistance, heat resistance and aging resistance. 2:light weight, non-toxic and odorless. 3:excellent flexibility and fatigue resistance
1. Compressure compensation function,stable flow rate. 2.Superior durability with raw material of chemical-proof and anti-ultraviolet rays 3. Cutting down production costs 4. Decreasing damage by from insects 5. Increasing productivity
Almost all pex used for pipe and tubing is made from high-density polyethylene (hdpe). Pex contains cross-linked bonds in the polymer structure, changing the thermoplastic to a thermoset. Cross-linking is accomplished during or after the extrusion of the tubing.
1:Chemically inert, resistant to almost all chemicals 2:Good weather resistance, corrosion resistance, and geing resistance 3:Low surface friction coefficient, high bond resistance 4:Good electrical characteristics, esp. superior electrical insulation performance 5:Wall Thickness: 0.5-50mm 6:Colors: Transparent/Black/White
pvc layflat hose pvc garden hose pvc suction hose
