"signal Generator, RF Signal Generator, Function Generator, Arbitrary Waveform Generator, Pulse/pattern Generator, Spectrum Analyzer, Power Supply, Power Analyzer, Digital Multimeter, Frequency Counter, Frequency Characteristic Analyzer, Logic Analyzer, Millivolt Meter, Distortion Meter, Noise Source, Frequency Standard Comparator.
Mass air flow meter, maf, mems capacitive accelerometer, mems gyros, mems piezoresistive accelerometer.
Arbitrary Waveform Generators TFG6900A With Direct Digital Synthesis technique (DDS)�large scale integrated circuits and soft-core embedded system (SOPC), TFG6900A series are of the excellent technical performances and powerful function characteristics which are necessary for the fast measurement. TFT-LCD interface can show the illustration of output waveform and parameters. Keypads and knob are convenient for operation. Arbitrary Waveform Generators Arbitrary Waveform Generators China Arbitrary Waveform Generators for sale FEATURES 4.3High resolution TFT LCD display Two independent channels output, same characteristic 1μHz frequency resolution for whole range 120 MSa/s sampling rate, 14 bits vertical resolution 5 standard waveforms, 50 built-in and 5 user-defined arbitrary waveforms FM, AM, PM, PWM, Sum, FSK, BPSK and SUM Modulation, sweep and burst function Channel coupling and combine features on CHB Build in 350MHz frequency counter Arbitrary Waveform Edit PC Software Standard interface: USB Host, USB Device and RS-232
Synthesized Signal Generators TFG3630 TFG3630 synthesized signal generators with PLL technique and use the FPGA to control screen display and output, with excellent technical performances and powerful function which are necessary for the experimental detection circuit and device detection. Large color LCD interface can show a variety of working parameters. Keypads and knob are convenient for operation. China Digital Multimeters China Frequency Characteristic Analyzer China Frequency Counter Features Frequency resolution: 3Hz Unlimited measurement range: digital setting directly for the whole range. Non-intergraded process: up to the stable value immediately when switching, continuous signal phase and amplitude without deflection. Sweep characteristics: with the function of frequency sweep and power sweep. Start point and stop point can be set arbitrarily. Modulation characteristics: pulse modulation signal with user-defined can be output. Operation mode: key operation, TFT-LCD interface, direct digital setting, continuous adjustment by knob. High reliability: large scale integrated circuit, SMT, high reliability and long service life. Communication port: USB device , RS232 and GPIB (optional) Specifications Frequency Range 25MHz~3GHz Resolution 3Hz Accuracy ±5ppm Stability 1Ã?10-7 Reference Frequency Reference Output: Frequency: 10MHz Level: >0dBm Port: BNC connector Reference Input: Frequency: 10MHz Power: -3 ~+7dBm Input Port: BNC connector Impedance(nominal): 50Ω Phase Noise -90dBc~-115dBc Offset20 kHz Spurious Harmonic:
SM2000A Serial AC Millivolt Meter SM2030A is suitable for measuring of RMS value voltage of Sine waveform that the frequency range is 5Hz~3MHz (5Hz~5MHz for SM2050A) . They all have the switch function between automatic and manual and automatic decimal positioning, as well as three-digit or four-digit display. Spectrum Analyzer Spectrum Analyzer for Sale Spectrum Analyzer Supplier Spectrum Analyzers Spectrum Analyzers China Universal Frequency Counter FEATURES VFD Two Display, Dual Independent Channels Auto/Manual Ranging can be selected Multiple display result with different units High Frequency Range from 5Hz to 5MHz Standard Interface RS-232 SPECIFICATIONS SM2030A SM2050A Frequency Range 5Hz ~ 3MHz 5Hz ~ 5MHz Measurement Range AC Voltage 50µV ~ 300V Scale 3mV, 30mV, 300mV, 3V, 30V, 300V dBV -86dBV ~ 50dBV(0dBV=1V) dBm -83dBm ~ 52dBm(0dBm=1mW 600Ω) Vpp 140µV ~ 850V Voltage Measurement Error â?¥5Hz ~ 100Hz ±2.5% reading ± 0.8% range >100Hz ~ 500kHz ±1.5% reading ± 0.5% range >500kHz ~ 2MHz ±2.0% reading ± 1.0% range >2MHz ~ 3MHz ±3.0% reading ± 1.0% range >3MHz ~ 5MHz ±4.0% reading ± 2.0% range Resolution Range 3 1/2 digits Display 4 1/2 digits Display 3mV 0.001mV 0.0001mV 30mV 0.01mV 0.001mV 300mV 0.1mV 0.01mV 3V 0.001V 0.0001V 30V 0.01V 0.001V 300V 0.1V 0.01V Damage Voltage 3V ~ 300V 350Vrms (5Hz ~ 5MHz) 3mV ~ 300mV 350Vrms (5Hz ~ 1kHz) 35Vrms (1kHz ~ 10kHz) 10Vrms (10kHz ~ 5MHz) General Characteristics Power AC220(±10%)V, 50 (1±5%)Hz,
SK3323J/3325J Programmable Linear DC Power Supply SK3323J/3325J Programmable Linear DC Power Supplies are widely applied in national defense, institution, university and factory, especially in the areas of computer measuring and automatic control system as DC power supply. FEATURES * Three outputs, the maximum power is up to 338W * Lowe Ripple and Noise: â?¤1mV / â?¤3mA * Standard Timing Output * Comprehensive over-voltage and over-temperature protection * Fully remote control interface: LAN, USB and RS-232 * 5 digit LED display can show voltage, current and power simultaneously. SPECIFICATIONS Model SK3323J SK3325J Channel CH1 0~32V/0~3A 0~32V/0~5A CH2 0~32V/0~3A 0~32V/0~5A CH3 0~6V/0~3A Line Regulation Voltage CH1, CH2,CH3 â?¤1Ã?10-4+3mV Current CH1, CH2,CH3 â?¤1Ã?10-4+500μA Load Regulation Voltage CH1 â?¤1Ã?10-4+3mV â?¤1Ã?10-4+5mV CH2 CH3 â?¤1Ã?10-4+3mV Current CH1, CH2,CH3 â?¤1Ã?10-4+500μA Programming/Readback Accuracy Voltage CH1 â?¤±(0.05%+20mV) CH2 CH3 â?¤±(0.05%+20mV) Current CH1 â?¤±(0.3%+5mA) â?¤±(0.3%+10mA) CH2 CH3 â?¤±(2%+20mA) Ripple and Noise Voltage â?¤1mV Current â?¤3mA Display resolution Voltage 1mV Current 1mA Display Digits Voltage 5 digits Current 4 digits Other function Timing Output Over temperature Protection (Realize through hardware) Over voltage Protection General Characteristics Rated Voltage 220-230 (198-242)V Rated Power 0.5kW 0.7kVA 0.6kW 0.8kVA Rated Frequency 50 (45-60) Hz USB charging Interface 5V 2A Remote Interface LAN, USB, RS-232 (standard) Dimension 256Ã?160Ã?440mm3 Weight 9KGs 10KGs
SA5052 SA5052 is fast and high accuracy, multi-function and auto measurement instrument for Voltage, Current, Resistance, Frequency. The simple front panel and convenient operation support the demand in measurement. Brief Introduction Digital Multimeter SA5052 is fast and high accuracy, multi-function and auto measurement instrument for Voltage, Current, Resistance, Frequency. The simple front panel and convenient operation support the demand in measurement. Measurement Functions: DC Voltage: 0.1V, 1V, 10V, 100V, 1000V. AC Voltage: 0.1V, 1V, 10V, 100V, 750V. DC Current: 10mA, 100mA, 1A, 10A. AC Current: 10mA, 100mA, 1A, 10A. 2 & 4 wire resistance: 100Ω, 1KΩ, 10KΩ, 100KΩ, 1MΩ, 10MΩ, 100MΩ. Frequency: 3Hz-1MHz. Period Diode Continuity Thermocouple and Temperature SPECIFICATIONS SA5052 5 1/2 digits Basic Function Range Best Accuracy ± (% reading + digits) DC Voltage 100mV/1V/10V/100V/1000V ± (0.01% + 4) AC Voltage 100mV/1V/10V/100V/750V ± (0.1% + 100) DC Current 10mA/100mA/1A/10A ± (0.05%+8) AC Current 10mA/100mA/1A/10A ± (0.3%+150) Resistance 100Ω/1KΩ/10KΩ/100KΩ/ ± (0.02%+6) 1000KΩ/10MΩ/100MΩ Capacitance 2nF/20nF/200nF/2uF/10uF ± (0.8%+10) Frequency 3Hz-1MHz ± (0.005%+8) Temperature -200 ~ 800 Features Reading Rate 500 reading/s Auto Range Diode Continuity Null Trigger Save/Read Math MAX.MIN,Null,dB, dBm, MX+B,Limit Test General Characteristics Safety IEC61010-1: 2001, CAT â? 1000V/CAT â?¡ 600V, Class of pollution: 2 Interface USB, RS-232, GBIP (optional) Power 110 V/220 V (1± 10%), 50 Hz/60 Hz, 15 VA Dimension & Weight 260Ñ?106Ñ?375 mm, 3.0 kg
SK10000 SK13530 programmable power supply is a new generation of programmable DC power supplies. It protects itself by warning and cutting off output once fun controlling module gets fault, transistor over-heating, and internal bus gets fault. It is of programmable CV/ CC adjustable step. Brief Introduction Programmable DC Power Supplies SK13530 programmable power supply is a new generation of programmable DC power supplies. It protects itself by warning and cutting off output once fun controlling module gets fault, transistor over-heating, and internal bus gets fault. It is of programmable CV/ CC adjustable step. The two working states, CV and CC, can be switched varying with the load. Meantime, the external voltage sampling terminal is supplied to output stable voltage for user load within the range of wire voltage drop. SK13530 programmable power supplies are widely applied in national defense, institution, university and factory, especially in the areas of computer measuring and automatic control system as DC power supply. Features All digital controlled, output 1mV/1mA step High stability, Low drift LED display the voltage/current and working status visually Intelligent temperature controlled fun with low noise Storage and recall function OVP (Over Voltage Protection) function Keypad locked function to avoid the misoperation Standard RS232 interface, optional USB SPECIFICATIONS Model SK11204 SK16008 SK13515 SK12025 Output Range 120V/4A 60V/8A 35V/15A 20V/25A Output Power 500W Resolution 1mV/1mA Source Effect CV â?¤1Ã?10-5+1mV CC â?¤1Ã?10-5+3mA Load Effect CV â?¤1Ã?10-4+3mV( Sense On) â?¤1Ã?10-4+30mV( Sense Off) CC â?¤1Ã?10-4+3mA Period and Random Deviation (PARD) CV â?¤1mV CC â?¤6mA Accuracy Voltage â?¤±ï¼?0.05%+10mVï¼? Current â?¤±ï¼?0.2%+50mAï¼? OVP â?¤±ï¼?0.5%+0.5Vï¼? General Characteristics Power AC220V(1±10ï¼?)V,50(1±5ï¼?)Hz Interface RS-232 (standard) USB (option) Dimension & Weight 225Ã?153Ã?650 mm, Approx 25kg
SU5000 Suin supplies the electronic test and measurement instruments, which include signal generator, power analyzer, spectrum analyzer, power supply, function generator, digital multimeters and other instruments Pulse/Pattern Generators SU5101/5102 SU5202G SU5302 SU5303 Channel 1/2 2 2 1 Waveform Pulse Single/Dobule, Logic Positive /Negative, Positive/Negative Polary Single/Dobule, Logic Positive /Negative Logic Positive /Negative Edge Time â?¤10ns â?¤10ns 8ns ~ 1ms 8ns ~ 1ms Overshoot â?¤ 10% â?¤ 10% â?¤ 10% â?¤ 5% Time Pulse Period 20ns ~ 10000s (frequency range: 0.1mHz ~ 50MHz) Time Interval 5ns ~ 9999.5s 8ns ~ 9999.5s Resolution 5ns (Low range), 10μ;s (High range) 4 digitsï¼?best case 0.1ns Interval Error ± (TÃ?5Ã?10-5 + 5ns)(Low range), ±(TÃ?5Ã?10-5 + 10μ;s) (High range) ±(TÃ?5Ã?10-5+5ns) Pattern Function N/A Length:4095bits Length:16384bits Format:NRZ Format:NRZ, RZ Rate:100mHz ~ 50MHz Rate:2mHz ~ 50MHz Resolution: 0.1Hz Amplitude Offset Amplitude Range 50mV ~ 10V(High Z) 50mV ~ 5V (50Ω) 50mV ~ 5V (50Ω) 50mV ~ 5V (50Ω) Offset Range 50mV ~ 10V(High Z) 50mV ~ 5V (50Ω) 50mV ~ 5V (50Ω) -5V~ 5V (50Ω) Output Impedance 50Ω TTL TTL/COMS Level Low Levelâ?¤ 0.3V, High Levelâ?¥3.0V (high impedance load) Output Impedance 50Ω Burst Burst Count 2 ~ 65000 cycles Burst Mode Continuous, Signle EXT. STD Input Frequency 10M mutiple Amplitude â?¥0.5Vrms Trigger Trigger Mode Internal, External, Manual Ext. Trigger Input Frequency: 1Hz ~ 10MHz (Square), Amplitude: 1Vpp ~ 20 Vpp Input Impedance â?¥100kΩ General Characteristics Power AC220V(1±10%), 50Hz(1±5%),â?¥50VA Display VFD 5.7' TFT LCD 5.7' TFT LCD 4.3' TFT LCD Optional Interface USB, GPIB RS232(Standard),GPIB RS-232(Standard) RS232(Standard),GPIB Dimension & Weight 254Ã?103Ã?384mm, Approx.3 kg 330Ã?155Ã?300mm,Approx.4.2kg 450Ã?100Ã?475mm, Approx.6.0 kg
TFG3600 Combine with DDS and PLL techniques 1500MHz Maximum Frequency 1ppm High Accuracy, Less Distortion Dual Independent Outputs AM, FM, FSK, PSK Modulation User can set accurate pulse width, burst signal as numbers USB Device, RS-232 Function Generators Combine with DDS and PLL techniques 1500MHz Maximum Frequency 1ppm High Accuracy, Less Distortion Dual Independent Outputs AM, FM, FSK, PSK Modulation User can set accurate pulse width, burst signal as numbers USB Device, RS-232 SPECIFICATIONS CHA TFG3605 TFG3615 TFG3610 Frequency Range Sine 1μHz ~ 500MHz 1μHz ~ 1500MHz 1μHz ~ 1000MHz Square 1μHz ~ 80MHz Resolution 1μHz (carrier frequencyâ?¤80MHz) 1Hz (carrier frequencyundefined80MHz) Accuracy ±1ppm, Frequencyâ?¥1.0kHz ±50ppm, Frequencyï¼?1.0kHz Sine Output Level Range Freqâ?¤500MHz -127dBm ~ +13dBm(-127dBm ~ -117dBm typical) Freqâ?¤1000MHz -110dBm ~ +13dBm(-100dBm ~ -110dBm typical) Freqâ?¤1500MHz -105Bm ~ +10dBm(-100dBm ~ -105dBm typical) Resolution 0.1dB Accuracy Freqâ?¤300MHz setting ±1dBm (output level +13dBm~-105dBm) Freqâ?¤1500MHz setting ±1.5dBm (output level +13dBm~-80dBm) setting ±2.5dBm (output level -80dBm~-100dBm) Stationary Wave Ratio (SWR) < 1.8 Sine Spectrum Purity Harmonic
Power rate from 1.5kw-500kw
Load Bank parameter: Rated Voltage & Frequency: 400VAC; 3 phase 4 wire, 50/60Hz, single phase 230V Max Load Power: 200kW Load Resolution: 1, 2, 2, 5, 10, 20, 40, 40, 80kW Power Factor: 1 Load Tolerance (overall): 3% Fan Control Power: AC110-240V single phase 50/60Hz Wire Connection: Load bank input terminal block Control power input 3-pin plug Communication Interface: RS485 Insulation: F Way of Working: Continuous Working Cooling Forced air, horizontal exhausting or vertical exhausting Transportation: With handle Dimensions Horizontal exhausting: 748*509*661mm (LH) Vertical exhausting: 663*512*746mm (LH) Weight: About 70kgs Operating Environment Parameter Ambient Temperature 20 50 Relative Humidity: 95% Atmospheric Pressure: 86 106kPa Brands of Main Components PLC: Siemens Alloy Resistor: Kaixiang Data Processing Software: Kaixiang
High frequency generator 1.Introduction: High frequency generator named radio frequency generator also. It is the core part of high frequency machinery. Different frequency- 6.78mhz, 13.56mhz, and 27.12mhz can be widely used for woodworking (plywood bending, glue curing, timber drying), grain worm killing, freezing meat melting, and environment protection field. High frequency generator generates electromagnetic fields between two electrodes through three phase alternating current. In this field, water and glue molecules are polarized - rotated - heated by friction. high frequency heating is not like conductive heating, which heat material step by step, but help object heated themselves by friction. This is called high frequency dielectric heating-quickly, efficiently and evenly. Besides, there are more advantages in high frequency heating: 1). Easy to control: once cut off power, no heating anymore; once power on, heating works wholly. 2). Low heating loss, energy saving. 3).Environment friendly: high frequency is clean power, dust free. 4).Hf power can kill worm and bacteria in the material like timber and grain. 2.Parameter: Model, hf20-6-ii-ch, hf30-6-ii-ch Power supply, ac 380 v, 50hz, 3 phase four wire Input power, 30kva, 45kva Output power, 20kw, 30kw Frequency, 6.78mhz/ 13.56mhz/27.12mhz Radio tube, fu834 fa, fu924 fa Commutate type, three phase full wave silicon commutate Cooling type, forced air cooled Tuning type, variable capacitance Protection, overload protection, wind pressure protection, door switch protection, filament warm up protection Output type, one/two outputs, one/two outputs Overall size, l1100xw900xh1900mm, l1100xw950xh1950mm Total weight, 700kg, 800kg
High frequency generator 1.Introduction: High frequency generator named radio frequency generator also. It is the core part of high frequency machinery. Different frequency- 6.78mhz, 13.56mhz, and 27.12mhz can be widely used for woodworking (plywood bending, glue curing, timber drying), grain worm killing, freezing meat melting, and environment protection field., High frequency generator generates electromagnetic fields between two electrodes through three phase alternating current. In this field, water and glue molecules are polarized -, rotated -, heated by friction., , high frequency heating is not like conductive heating, which heat material step by step, but help object heated themselves by friction. This is called high frequency dielectric heating-quickly, efficiently and evenly. Besides, there are more advantages in high frequency heating: 2.Features: 1). Easy to control: once cut off power, no heating anymore; once power on, heating works wholly. 2). Low heating loss, energy saving. 3).Environment friendly: high frequency is clean power, dust free. 4).Hf power can kill worm and bacteria in the material like timber and grain. 3.Parameter: Model, hf20-6-ii-ch, hf30-6-ii-ch Power supply, ac 380 v, 50hz, 3, phase four wire Input power, 30kva, 45kva Output power, 20kw, 30kw Frequency, 6.78mhz/ 13.56mhz/27.12mhz Radio tube, fu834 fa, fu924 fa Commutate type, three phase full wave silicon commutate Cooling type, forced air cooled Tuning type, variable capacitance Protection, overload protection, wind pressure protection, door switch protection, filament warm up protection Output type, one/two outputs, one/two outputs Overall size, l1100xw900xh1900mm, l1100xw950xh1950mm Total weight, 700kg, 800kg
Preformed Guy Grip , Preformed Guy Grip Dead End, Dead End Guy Wire Grips, Preformed Dead End Guy Grip, Dead End Grips About Preformed Guy Grip A preformed guy grip is also named preformed guy grip dead end, which is a set of twisted wires used to create a connection to an eye thimble for added stability to telecommunication or cable. The recognized and reliable preformed guy grip dead end for the connection is also responsible to grip the conductor, ground the wire, and application for optical fiber. Application: The dead end guy grip is made of the same material as the strands they apply to, and is used to pull wire rods in the construction of power and communication lines. Installation: After the initial installation, the dead end guy grip can be removed and reapplied twice to re-tension the cable. If a dead angle needs to be removed after three months of installation, a new dead angle should be replaced. a professional new technology enterprise that develops, manufacture preformed guy grip deadend for adss, preformed guy grip with dead end clamp, preformed dead end guy grips. We have a large production base and a professional and independent foreign trade company to provide customers with high-quality services
PTB Electricity Meters Acrel DJSF1352-RN DC energy meter, is a PTB(Eichrecht) approved DC energy meter with dual DC input is mainly designed for telecom base station, DC charging pile, solar photovoltaic and other applications. This series of meters can measure voltage, current, power and positive and negative energy in the DC system. In the actual use of the site, it can measure the total energy, and can measure the energy within the specified time period. Detection results can be used for local display, and can be connected with industrial control equipment, computer, measurement and control system. Features Measurement: kWh, kVarh, Power, Current, Voltage and etc Current Rating: -/75mV (with Shunt); -/4~20mA (with Hall Sensor) Voltage Rating: 0~1000V DC Application: DC Battery; Charging Pile; Solar PV and etc Communication: RS485 (MODBUS-RTU) Extra Function: Dual DC Circuits Monitoring; Secondary RS485 (MODBUS-RTU); Built-in Bipolar Power Source (for Hall Sensors); DO/DI Function Display: LCD Display Dimension: 72*71*87.8mm (L*W*H) Installation: 35mm DIN Rail Power Supply: 85~265V AC/DC; 24V(±10%) DC; 48V(±10%) DC Standard&Certificate: CE
CE Smart Energy Meter Energy meters play a vital role in energy control and management, providing key information for improving energy efficiency. Energy meters support electricity trading and billing processes for end users and businesses. With energy meters, energy consumption monitoring and optimization can be achieved. Acrel power meters can reduce energy consumption through predictive maintenance, identification of underperforming equipment, calculation of return on investment, and many other measurements. Widely used in various control systems, SCADA systems, and energy management systems, designed for the power monitoring needs of power systems, industrial and mining enterprises, public facilities, and smart buildings. It has complete communication and networking functions. Smart, Accurate, and Reliable Energy Monitoring for Modern Facilities Acrel introduces the CE Smart Energy Meter, engineered to deliver precise energy measurement and intelligent monitoring for commercial and industrial applications. Designed to meet international standards, our smart meters provide actionable insights into energy consumption, enabling businesses to improve energy efficiency and reduce operational costs. Key Features Smart Energy Monitoring: Real-time tracking of voltage, current, frequency, active and reactive power, and power factor across single-phase and three-phase systems. Advanced Power Quality Analysis: Detects and analyzes 2nd to 31st harmonics, ensuring stable power quality and preventing equipment failures. Seamless Communication: RS485 interface with MODBUS-RTU protocol ensures smooth integration with building management and energy monitoring systems. High Accuracy: Designed with a rated voltage of 220~264Vac L-N and rated current of 50mA AC (via -/50mA CTs) for reliable and precise readings.
Acrel DJSF1352-RN DC energy meter with dual DC input is mainly designed for telecom base station, DC charging pile, solar photovoltaic and other applications. This series of meters can measure voltage, current, power and positive and negative energy in the DC system. Features UL Listed Measurement: kWh, kVarh, Power, Current, Voltage and etc Current Rating: -/75mV (with Shunt); -/4~20mA (with Hall Sensor) Voltage Rating: 0~1000V DC Application: DC Battery; Charging Pile; Solar PV and etc Communication: RS485 (MODBUS-RTU) Extra Function: Dual DC Circuits Monitoring; Secondary RS485 (MODBUS-RTU); Built-in Bipolar Power Source (for Hall Sensors); DO/DI Function Display: LCD Display Dimension: 72*71*87.8mm (L*W*H) Installation: 35mm DIN Rail Power Supply: 85~265V AC/DC; 24V(±10%) DC; 48V(±10%) DC Standard & Certificate: CE
Acrel ADL400 single phase energy meter is mainly used to measure single phase active energy of low-voltage network, and can measure voltage, current, power and other electricity at the same time, and can be equipped with RS485 communication function, which is convenient for users to monitor, collect and manage electricity consumption. MID Energy Meter Acrel ADL400 MID Energy Meter is mainly used to measure single phase active energy of low-voltage network, and can measure voltage, current, power and other electricity at the same time, and can be equipped with RS485 communication function, which is convenient for users to monitor, collect and manage electricity consumption. MID MID refers to the "Measuring Instruments Directive," specifically "Directive 2004/22/EC of the European Parliament and of the Council dated 31 March 2004 on measuring instruments." Its purpose is to establish a unified European market for measuring devices through standardized approval processes.
SA2100 Class S Power Quality Analyzer Overview SA2100 is a handheld multi-functional device which is designed to measure and analyze single or three-phase power system. This portable class S device can provide safe, convenient and accurate measurements for troubleshooting power networks. SA2100 Portable Power Quality Meters Portable Power Quality Meters enable electricians and facility maintenance professionals to troubleshoot and benchmark power quality problems over time. They help you identify energy waste in your facility and detect and prevent power problems before they occur. Why do you need Power quality meter analyzer? Portable Power Quality Meter identifies power quality problems that often manifest themselves as dips, spikes, harmonic distortion, imbalances, flicker and transients. Power quality determines the suitability of electrical energy to drive motors, machines and other end-user equipment. Poor power quality can affect the ability of these devices to operate properly, which can lead to malfunctions, premature failures or possibly cause them to not work at all. Most power quality analyzers monitor total harmonic distortion, phase angle, power factor, balance, etc. to get a complete picture of the system.
