Appearance: White Powder Solubility: It is soluble in ester, ketone, aromatics and alcohol ethers. It is insoluble in 200# gasoline and alcohol. Characters: 1, Good adhesion and High hardness; 2, Good compatibility with CAB or NC; 3, Non yellowing and good resistance to weather; 4, Good compatibility with other resins; 5, Good adhesion with plastic substrate; Specification: TYPE NO.: AR-001 AR-002 AR-66 AR-70 AR-800 ( ALCOHOL SOLUBLE ) Solid Content (%) 100 100 100 100 100 Softening Point (�ºC) 115----130 115----128 130----150 150----160 108 Acid Value (mgKOH/g) 18----35 18----35 3----6 5----8 4.29 Tg (�ºC) 45 40 50 61 39.69 Viscosity (25�ºC mpa.S) 250--450 250--450 2000--4000 250--0450 100--200 Application: AR--001 Exterior wall coating, fire retardant coatings AR--002 Road marking paint, floor coatings AR--66 Inks, Plastic coatings, container coatings AR--70 Plastic coatings, PVC Inks AR--800 Ink, plastic coatings, environment--friendly coatings Packing: 25kgs net per bag, 12500kgs/1x20`gp with pallet. Storage: Should be stored in dry, aeration area, avoiding the wet. The valid store period is two years.
Dimethyl sulfoxide is an extremely important non proton polar solvent that is soluble in both water and organic solvents, it mainly used in dye, acrylic fibers, paint, coating, antifreeze and agriculture. Application: 1. DMSO can be used for the extraction of arene, also as the reaction medium used for resins and dyes, and applied to acrylic polymerization and spinning solvent. 2. DMSO can be used as an organic solvent, reaction medium and the intermediates of organic synthesis. It is highly versatile. This product has a highly selective extraction capacity, and can be used as the polymerization and condensation solvent of acrylic resin and polysulfone resin, as the polymerization and spinning solvent of polyacrylonitrile and cellulose acetate, as the extraction solvent for separating alkanes and arenes, and as the reaction medium for the arenes, butadiene extraction, acrylic fiber, plastic solvents, organic and synthetic dyes, and pharmaceuticals industries. In the field of medicine, dimethyl sulfoxide has anti-inflammatory and analgesic effect with a strong capability of penetration through the skin, and thus being able to dissolve certain drugs and boost their penetration into the human body to achieve the therapeutic purposes. Taking this carrier property of dimethyl sulfoxide can make it be used as pesticide additives. Add a small amount of dimethyl sulfoxide in some pesticides can facilitate the penetration of pesticides into the plant in order to improve the efficacy. dimethyl sulfoxide can also be used as the dye solvent, dye removing agent, and dye carrier for the synthetic fibers. It can also be used as the absorbent of recycling acetylene and also the modifiers of synthetic fiber, antifreeze agent and the capacitor dielectric, brake oil, and extractant of the rare metals. 3. DMSO can be used as analytic solvents and fixing agent of gas chromatography as well as the solvent for analyzing UV spectra
Metallic Fibers Main material: Various types of iron chrome aluminum alloy Iron chrome aluminum fiber / metallic fiber Introduce: Iron-chromium alloy is an electrothermal alloy with the following characteristics: (1) High resistivity (2) Small temperature coefficient (3) Long service life (4) high surface load (5) Good oxidation resistance. Iron-Chromium-Aluminum fiber is made from iron-chromium-aluminum wire by a beam stretching process. The diameter ranges from 8 μm to 40 μm. It can be used in higher temperature environments than stainless steel fibers. It is mainly used as a raw material for manufacturing automobile exhaust gas purifiers, high temperature filter felts, burners and the like.
PP Fiber-Polypropylene Fiber is made from 100% virgin PP granular, after extruding from different mould and technology, EipponCell can get 4 different types of fiber, including Monofilament form, Fibrillated Mesh form, Twisted Bunchy and Wave form with different size. These fiber can improve the reinforcement of mortar or concrete performance effectively to make them strong and protect the projects. Basic Info Model NO. 3mm-19m Acid, Alkali & Salt Resistance Extremely Strong Crack Elongation 15-20% Length 6mm/12mm/19mm etc Model Number Monofilament Use Concrete Tensile Strength 450MPa, 500MPa Min Elastic Modulus 3500MPa Elongation at Break 15%-25% Fiber Diameter 0.03+/-0.005mm Acid &Alkali Resistance High Quality Trademark YiBang Transport Package 20kg/Bag Specification 3mm-19mm Origin China HS Code 550340 Product name PP Fiber Diameter 18 microns, 34 microns Length 3mm, 6mm, 12mm, 18mm, 52mm... Tensile Strength >450Mpa (normal strength) >600Mpa (high strength) Crack Elongation 15-20% Acid & Alkali Resistance Strong
It is a reddish brown, glossy columnar crystal or crystalline powder. Odorless, no change in air exposure, soluble in water and alcohol. Methylene blue is mild and safe to use, and it also helps to improve the respiratory function of fish. Main Uses: 1) methylene blue can be used for dyeing; 2) Superior product methylene blue can be used for sterilization and disinfection; 3) Industrial grade methylene blue is used for dyeing cotton, acrylic fiber, hemp, silk and paper, and is also used for coloring bamboo and wood and for making ink (red ink) and color lake; 4) Analysis of pure methylene blue used as REDOX indicator, adsorption indicator and biological stain in chemical reagents, such as the determination of tin, boron and other metals, mixed indicator for serum protein test, shed cell test staining solution, basic methylene blue staining solution. 5) Analysis of pure methylene blue used for the determination of tin. Reductive titrant used to precipitate perchlorate and rhenate. Determination molybdenum by catalytic spectrophotometry. 6) Detoxification drugs, can be used for nitrite, sulfonamide, cyanide poisoning antidote. 7) Methylene blue for the development of new materials. 8) Bacterial stain.
This is Bella Yang from Hebei Zongyan Technology Co.,Ltd.. Glad to hear that you're on the market for PET Chips.we specialize in this field for many years,with good quality and pretty competitive price.such as Polyester Staple Fiber, Polyester fibers, Polypropylene Staple Fiber, Polypropylene fiber(PP fiber), PET Chips, HDPE, LDPE, LLDPE,etc.
Carbon Fiber Braided Sleeve for Prosthetic The Braided Carbon Fiber Sleeve will perfectly conform to the shape of products with changing geometries, such as prosthetic limbs and field hockey sticks, to improve overall performance, minimize weight, and maximize the ultimate tensile strength of carbon. Braided Carbon Fiber Sleeve The Braided Carbon Fiber Sleeve will perfectly conform to the shape of products with changing geometries, such as prosthetic limbs and field hockey sticks, to improve overall performance, minimize weight, and maximize the ultimate tensile strength of carbon. FEATURES Twill weave for excellent compliance, strength and aesthetics 45° angle twill weave direction Easily wetted by resin Resistant to fatigue and durable
Prosthetic limbs Low Ankle Carbon Fiber Foot A carbon fiber foot is a type of prosthetic foot that incorporates carbon fiber materials in its construction. Carbon fiber is known for its high strength-to-weight ratio, making it a popular choice for designing lightweight and durable prosthetic components. . Carbon Fiber Foot A carbon fiber foot is a type of prosthetic foot that incorporates carbon fiber materials in its construction. Carbon fiber is known for its high strength-to-weight ratio, making it a popular choice for designing lightweight and durable prosthetic components. Here are some key features and advantages of carbon fiber feet Lightweight: Carbon fiber is exceptionally lightweight, which makes it an ideal material for prosthetic limbs. This feature reduces the overall weight of the prosthesis, making it easier for the user to walk, run, or engage in various activities. Strength: Despite its lightweight nature, carbon fiber is incredibly strong and durable. This ensures that the prosthetic foot can withstand the stresses and strains associated with regular use. Energy Return: Carbon fiber feet are designed to store and release energy during walking or running. This energy return mechanism can enhance the user's walking efficiency and reduce the effort required, leading to a more natural gait and less fatigue.
Quick information Brand name: feiniuplace of origin: chinamodel number : 014application : industrialconductor material : aluminuminsulation material : rubberjacket : pvctype : low voltage Description Fiber optic cable factory price outdoor cable manufacturer Adss cable also known as the whole medium self-supporting fiber optic cable, the whole medium that is used in the optical fiber is a full dielectric material, self-supporting fiber cable is to strengthen its own components to withstand weight and external load. The name of the cable on the use of this environment and its key technology: because it is self-supporting, so its mechanical strength plays a decisive role; the use of all-media material is because the cable is in a high-voltage strong electric environment, must be able to withstand strong electricity influence; because it is used in the power tower overhead, so there must be supporting the cable will be fixed on the tower. Adss cable has three key technologies: fiber optic cable mechanical design, the suspension point to determine and supporting the selection and installation.
Quick information Brand name: feiniuplace of origin: chinamodel number : 013application : industrialconductor material : copperinsulation material : rubberjacket : pvctype : high voltage Description Opgw cable fiber optic manufacturers per meter price Opgw is primarily used by the electric utility industry, placed in the secure topmost position of the transmission line where it shields the all-important conductors from lightning while providing a telecommunications path for internal as well as third party communications. Optical ground wire is a dual functioning cable, meaning it serves two purposes. It is designed to replace traditional static / shield / earth wires on overhead transmission lines with the added benefit of containing optical fibers which can be used for telecommunications purposes. Opgw must be capable of withstanding the mechanical stresses applied to overhead cables by environmental factors such as wind and ice. Opgw must also be capable of handling electrical faults on the transmission line by providing a path to ground without damaging the sensitive optical fibers inside the c able. Packaging & delive Packing :with wooden drum or as your requestdelivery lead time : 15 days -
Quick information Brand name: feiniuplace of origin: chinamodel number : 012application : industrialconductor material : copperinsulation material : xlpejacket : rubbertype : medium voltage Description Single mode ground wire opgw fiber optic cable Opgw is primarily used by the electric utility industry, placed in the secure topmost position of the transmission line where it , shields, the all-important conductors from lightning while providing a telecommunications path for internal as well as third party communications. Optical ground wire is a dual functioning cable, meaning it serves two purposes. It is designed to replace traditional static / shield / earth wires on overhead transmission lines with the added benefit of containing optical fibers which can be used for telecommunications purposes. Opgw must be capable of withstanding the mechanical stresses applied to overhead cables by environmental factors such as wind and ice. Opgw must also be capable of handling ele ctrical faults on the transmission line by providing a path to ground without damaging the sensitive optical fibers inside the cable.
Yarns like acrylic yarn dty polyester yarn.
1. Description: It is the raw material for making thermosetting resin, light curing epoxy resin coating, oil resistant coating and drying coating. Its copolymer emulsion is used for fiber finishing, fabric, leather and paper coating. Also used as wood, metal and other adhesives. 2. Typical recipes Used as crosslinked monomer in acrylic emulsion. The amount of carboxyl-containing acrylic emulsion pressure-sensitive adhesive is L % ~ 2% of the total monomer mass, and the initial adhesion will be greatly reduced if it exceeds 3%. For emulsion adhesives without carboxyl group, the general dosage is not more than 5%. The crosslinking reaction temperature of MMAM alone is high, generally 120 ~ 170�ºC, and the addition of protic catalyst can reduce the crosslinking temperature. Acrylic acid (AA) can both provide hydrogen protons and copolymerize with acrylates, so MMAM should be used as a composite crosslinking agent with AA at a dosage of 3:2. Cross-linking agent HA can replace N- hydroxymethyl acrylamide, and does not contain formaldehyde. 3. Application scope A. Can be used as crosslinking agent, widely used in fiber modified resin, processing dyes, plastic adhesives, soil stabilizers, etc. B. Used for fiber modification, resin processing, adhesives and paper, leather, metal surface treatment agent. Free samples 4. Storage and packaging A. All emulsions/additives are water-based and there is no risk of explosion when transported. B. This product can be packed in 25KG,50KG,200KG,1000KG plastic barrels. C. Store sealed in a cool, dry and ventilated place indoors. Before use, the container should be strictly sealed after each use. D. The product should be well sealed during transportation, moistureproof, alkali strong acid and rain water and other impurities mixed.
What is Dimethyl sulfoxide? Dimethyl sulfoxide (DMSO) is an organosulfur compound with the formula (CH3 )2SO. It is an important polar aprotic solvent that dissolves both polar and nonpolar compounds and is miscible in a wide range of organic solvents as well as water. It has a relatively high boiling point. DMSO is widely used in chlorofluoroaniline, acrylic and aromatics extraction, and externally applied agent, inositol nicotinate,antioxidant 1010, synthesis of berberine, esterification accelerator, waterborne paint antifreeze, capacitor, paint remover,trifluoronitrobenzene, sucrose esters of stearic acid, polyvinyl chloride fiber, paraffin refining, alpine region automobile antifreeze, kettle cleaning agent, and pesticide synergist, etc
UV absorbent UV-531 is a kind of anti-aging additives with excellent performance and high efficiency, can absorb 270-340 nm UV light, with light color, non-toxic, good compatibility, small migration, easy to process and other characteristics. It provides maximum protection to the polymer and helps to reduce color, while delaying yellowing and arresting the loss of physical properties. It is widely used in PE, PVC, PP, PS, PC, plexiglass, polypropylene fiber and ethylene vinyl acetate and other aspects. And for the dry phenolic and alkyd varnish, polyurethane, acrylic acid, epoxy and other air-drying products and automobile refit paint, powder coating, polyurethane, rubber products, etc., to provide them with good light stabilization effect. The dosage of 0.1% to 0.5%.
It is the main industrial sterilization, antiseptic and anti-enzyme agent. It has outstanding inhibition of the growth of molds (fungi, bacteria), algae and other microorganisms in the organic medium, and solves a series of problems such as mold, fermentation, deterioration, demulsification, odor, etc. of organic products caused by the growth of microorganisms. Therefore, developed countries widely use BIT in latex products, water-soluble resins, coatings (latex paint), acrylics, and polymers. Polyamine products, photographic lotion, paper-making, ink, leather, lubricants and other products.
BBIT offers antimicrobial activity against fungi, yeasts and bacteria. BBIT is used for protection and surface anti-bacterial of PVC, silica gel, polyolefin, polyurethane, acrylic resin. Applications include: shower curtain / fabric coating (such as: ski clothing, raincoats, tents) / Vinyl wallpaper and floor / pool substrate / conveyor / soles and uppers / roofing membrane / wire and catheter sheath material / auto accessories (such as: hood, door seals, shock absorbers, steering wheel) / foam material (such as: cushions, gaskets, insulation materials ) / Household Appliances liner (such as: washing machines, refrigerators) / tarpaulins and awnings / antibacterial wall floor paint.
Black annealed wire, also called black wire, comes in the form of coil wire or cut wire. Wire Gauge SWG in mm BWG in mm In Metric System mm 8# 4.06 4.19 4.00 9# 3.66 3.76 - 10# 3.25 3.40 3.50 11# 2.95 3.05 3.00 12# 2.64 2.77 2.80 13# 2.34 2.41 2.50 14# 2.03 2.11 - 15# 1.83 1.83 1.80 16# 1.63 1.65 1.65 17# 1.42 1.47 1.40 18# 1.22 1.25 1.20 19# 1.02 1.07 1.00 20# 0.91 0.89 0.90 21# 0.81 0.813 0.80 22# 0.71 0.711 0.70 23# to 34# also available for galvanized iron wire. WIRE SERIES: Electro Galvanized Wire hot-dipped galvanized wire Black Wire Nail Wire Redrawing wire stainless steel wire Barbed Wire MESH SERIES: welded wire mesh Stainless Steel Wire Mesh Dutch Filter Wire Mesh Chain Link Fencing Brass Wire Mesh Expanded Plate Mesh WIRE MESH SERIES: Stainless Steel Window Screen Aluminum Alloy Window Screen Galvanized Iron Window Scren Enamelled Window Screen Fiberglass Window Screen Home | Company | Product | Workshop | Qu
PTA is one of the important bulk organic raw materials, widely used in chemical fiber, light industry, electronics, construction and other aspects of the national economy. At the same time, the application of PTA is more concentrated. More than 90% of PTA in the world is used to produce polyethylene terephthalate (PET). It needs 0.85-0.86 tons of PTA and 0.33-0.34 tons of MEG to produce 1 ton of pet. Polyester includes fiber chip, polyester fiber, bottle chip and film chip. In the domestic market, 75% of PTA is used in the production of polyester fiber; 20% is used in the production of bottle grade polyester, mainly used in the packaging of various drinks, especially carbonated drinks; 5% is used in film grade polyester, mainly used in packaging materials, films and tapes. It can be seen that the downstream extension product of PTA is mainly polyester fiber. Application: PTA is mostly used in the production of polyethylene terephthalate (polyester). It is an important raw material for polyester fibers, films, plastic products, insulating paints and plasticizers. It is also used in dyes and other products' production.
Triethylene glycol monomethyl ether is a chemical used in organic synthesis. As a solvent and thinner for printing ink, industrial cleaning agent, coating (nitro fiber paint, varnish, enamel), copper coated plate, printing and dyeing, etc. It can be used as raw materials for chemical products such as pesticide intermediates, pharmaceutical intermediates and synthetic brake fluid. As electrolytes for electrolytic capacitors, chemical fiber dyeing agent for leather, etc. Used as textile auxiliaries, synthetic liquid dyes, chemical fertilizers and desulfurization agents in oil refining.
