Mijing Dot Matrix Face ID Repair Holder Fixture, Support phone X-11 pro max Lattice Repair, MJ Front Facing Camera Repair Fixture for Fix Face ID not working.
WL tin planting Steel Mesh For Phone Face ID / dot matrix / original color / tail plug small plate tinned steel mesh, Precise hole position enough tin planting.Accurate positioning, al-tin planting, one-time molding non-tin adhesion, non-tin connection, easy to disconnect Steel mesh material: steel Product name: ip x-11pro maximum Face ID /dot matrix/original color/tail plug small plate tinned steel mesh Features: not easy to deform, prevent heating and bulging accurate hole position, one-time molding Applicable models: X-XR-XS- XS MAX-11-11PRO-11PRO MAX Stand by XR-XS-XS MAX 11-11PRO-11PRO MAX Surface dot matrix original color 11pro tail plug small plate planting tin Good toughness, high temperature resistance, Heated anti-drum design Planting tin is more suitable with continuous bending and full of toughness Note: The manual measurement is wrong the actual size is subject to the actual product
JC Dot Matrix cable for Phone X-13 Pro Max Face ID repair. JC Dot Matrix Flex Cable is used to repair Phone Face ID lower/higher issues. JC dot projector lattice IC chip for Phone 13/13Pro/13 Pro Max/13 mini face ID repair. JC Dot projector flex cable used with JC Pro1000s Dot Matrix Module or JC V1S dot projector board. JC Face ID Dot Flex Cable For Phone X/XS/XS MAX/11/11PRO/11 Pro Max/12/12Pro/12 Pro Max/12 Mini/13/13Pro/13 Pro Max/13 mini. JC dot matrix flex cable full set 13pcs(X-13 Pro Max): 1x JC dot matrix flex cable for Phone X. 1x JC dot matrix flex cable for Phone XS. 1x JC dot matrix flex cable for Phone XS MAX. 1x JC dot matrix flex cable for Phone XR. 1x JC dot matrix flex cable for Phone 11. 1x JC dot matrix flex cable for Phone 11 Pro. 1x JC dot matrix flex cable for Phone 11 Pro Max. 1x JC dot matrix flex cable for Phone 12/12 Pro. 1x JC dot matrix flex cable for Phone 12 Pro Max. 1x JC dot matrix flex cable for Phone 12 Mini. 1x JC dot matrix flex cable for Phone 13. 1x JC dot matrix flex cable for Phone 13 mini. 1x JC dot matrix flex cable for Phone 13 Pro/13 Pro Max. Tools required: JC Face lattice detection module (JC Dot Matrix Module) JC Pro1000s, or JC V1S V1S dot projector board.
Mijing K33 Pro 3 in 1 Face ID repair holder front facing camera repair fixture for Phone Dot Matrix repair tools, Face Lattice tin planting fixture support for Phone X XS XR XS MAX 11 11 Pro 11 Pro Max, MJ K33 Pro 3-in-1 for fix Phone Face ID not working, mobile phones face lattice repair fixtures for Phone XS XS MAX Phone 11 Pro Max. Mijing K33 Pro 3 in 1 Front Facing Camera Repair Holder Fixture For Phone Phones Face ID Not Working Mijing K33 Pro 3-in-1 Fixture : Repair the disassembly area / Chip IC repair area / Face Lattice tin planting area Product Features : Made of high quality durable material. Convenient to fix the soldering net. Specially designed for Phone X / XS / XS Max / XR / 11 / 11 Pro / 11 Pro Max / 12 Mini / 12 / 12 Pro / 12 Pro Max. Used to repair mobile phone motherboard IC chip. Make your repair work easier. We promised all products are new condition, but this item is easy to get scratched,there may be some scratches and fingerprint on the surface,please make sure you do not care before your order.
Magico iFace tool face dot matrix projection repair detector for Phone X XR XS Max 11 Pro Max Face ID repair tools, Dot Projector Programmer and dot matrix flex cable for Phone Face ID higher lower repair. Magico iFace Tool Dot Projector Programmer For Phone X-11 Pro Face ID ã??Higherã??Lowerã??Repair. Package Features: Solve Face ID Not-working Problems: Move Phone a little lower/higher, Face ID is Not Available, Face Not Recognized, Unable to activate Face ID on this Phone, etc. Support Face ID Fusion, Offline Data Read & Write, Program Burning & Erasion; with Free Update! Support Offline, Power-Off & PC-free Data Saving! 3rd Generation FPC! Low Energy Consumption! No Power Leakage!
JC V1S/V1SE Headphone Speaker Flex Cable Detection Board FPC Sensor Flexible Cable for Phone True Tone Face ID Repair. Functions: 1. Support to repair phone x face ID & truetone problem caused by receiver FPC Failure.o require original receiver FPC. 2. Receiver FPC detecting adaptor is for working on JC V1S, which support repair 8-12 Pro Max full series face lD true tone problem caused by receiver FPC failure, no require original receiver FPC. JC V1S receiver flex cable detection board works with the JC V1S host, it's used to detect Phone true tone function,and repair Phone Face ID and true tone functions without original earpiece speaker with sensor flex cable. Models: 1. JC V1S/V1SE receiver FPC board. 2. JC earpiece speaker receiver FPC sensor flex cable for Phone
Replacement For Phone X-11 Pro Max Infrared FPC Flex Cable.i2C InFrared FPC Face ID Flex Cable For Phone X-11 Pro Max Repair. Feature: High Precison Pad Through Hole Design, More Stable Welding Pricise Alignment Welding By One Operating, Making Easier Maintenance Laser Cutting Smooth Craftmanship , Soft And Durable Original Apperance, High Technology , Reduce Rework
Phone Dot Matrix Repair Accessory For X XS XSMAX 11 11pro MAX Face ID Repair Bracket Front Camera Rework Tool. i2C Face ID Dot Matrix Holder Front Face Camera Fix Clamp Tool For iPone X-12 PRO MAX, Compatible For Phone X/XS/XS MAX/11/11 Pro/11 Pro Max/12 Mini/12/12 Pro/12 Pro Max.
dot matrix alignment Face ID axis extension flex cable for Phone X-13 Pro Max. Wylie dot matrix extension cable for Phone Face ID function detection repair. Features: 1. WYLIE Dot Matrix Lattice Alignment Flex Cable for Face Lattice Maintenance Repair. 2. After the Lattice repair is completed, there is no need to apply Glue. 3. The extend cable can cooperate with the fixture to test the glue in advance. 4. Paste the glue to achieve 99% perfect alignment of the Lattice. 5. Dot matrix alignment extension cable suitable for Phone
i2C 7 IN 1 Lattice Face Precision Calibrator for Phone X/XS/XSMax/XR/11/11Pro/11ProMax,High hardness aluminum alloy for fast fix Lattice Face Precision Calibrator. Features: 1.Fast fix 2.Multi-model adaptation 3.High hardness aluminum alloy 4.Auxiliary fit and precise alignment
i2C Battery Data Test Guide Cable Battery Start Extension Cord Compatible Phone Battery Repair. I2C battery test lead flex cable for i2c I6S programmer. Function introduction: No-removal battery extension test + guide in one step 1. Blue/green light on - Can detect and modify battery data 2. Yellow/Red light on - Bootable mobile phone popup Features: Dual-function switching use, test and guide are all done Replacing the battery guide shows the real battery data Change battery automatic boot/test dual function Dual LED light reminder, green /blue test, red light/yellow light guide FPC flexible material can be bent and folded for use No-removal battery extension test to modify data, guide the mobile phone pop-up window Support 5SE-13Pro Max models Operation method: Snap one end of the battery guide cable to the corresponding socket of the battery. The other end is buckled on the detection and reading device. Move the toggle switch to the "test function" end, and the blue or green light turns on to detect and modify battery data.
REFOX RP30 repair programmer allows you to read and write information about Apple Phone's battery, Face ID, and other data. The battery detection board and the dot projector detection board are compatible with our phone repair programmer. It communicates with the REFOX assistant software on the computer through the Type-C cable. Write the original battery data and FaceID encryption chip information into the new corresponding parts, and your Phone will resume regular operation after replacing. Features: 1.Support battery data read and write, and Face ID fix. 2.The device function can be expanded via the online free firmware. 3.Repair the underlying data, accessories information won't be distorted. 4.Data cloud backup to prevent data loss. 5.Easy to use, multi-language support.
Best quality TBK BK008 electric screwdriver with 24 kinds of bits suitable for disassembly and repair of most mobile phones tablet watch. TBK electric screwdriver set adjustable torsion class urgent stop dismantling Charge bolt driver tools. Specification: Model: TBK BK008 Electric Screwdriver. Product torsion: 0.1-2.5kgf.cm. Safe speed: 395r/min. Battery capacity: 800mA. Host size: 130 20mm. Features : Voltage: 3.6V. Power supply mode: direct current. Torque control: Yes. Whether there is a positive or negative turn: Yes. 8 stall adjustment, brakes. The latest design, using various occasions, such as mobile phone maintenance and disassembly, mechanical maintenance and disassembly, precision ammeter disassembly and assembly, really adapt to each location
The battery Load Bank as discharge monitor is specially designed for the battery string for verification discharge experiments, capacity tests, and daily maintenance of battery strings, engineering acceptance and other tests of DC power supply load capacity. Using the latest wireless communication technology, the battery discharge process can be monitored in real time through the PC monitoring software, and the discharge process of each battery can be monitored. The power consumption part of the tester adopts the new PTC ceramic resistor as the discharge load, which completely avoids the red hot phenomenon, and is safe and reliable without pollution. The whole machine is controlled by a microprocessor, LCD display, and English menu. The design is novel, small in size, light in weight and easy to move. After the various discharge parameters are set, the entire constant current discharge process is automatically completed. Fully intelligent. Make the entire discharge process safer. The portable and intelligent professional design of the tester series makes the discharge test work simple and easy, greatly reduces the labor intensity of professional maintenance personnel, and also improves the scientific and intelligent discharge test.
Using the most advanced AC discharge test method, it can accurately test the voltage and internal resistance at both ends of the battery, and judge the battery capacity and technical status of the battery. Customers can choose according to their own situation according to the internal resistance test, voltage test, and capacity estimation of batteries used in the communication industry. As the basis for the matching of the internal resistance of the new battery; the internal resistance of the battery is tested before and after discharge to identify the real backward battery; the key operation and the liquid crystal touch are two operating modes; it can test the battery in Strings or single cell.
1. Built-in static electricity elimination device, it can blow the particulate pollutant when eliminiate the static electricty. 2. ABS plastic casing, ergonomic handle, lightweight design to improve efficiency. 3. Automatic ion balance system, decay time less than 1 second, ion balance less than 15 V ( The distance is 15CM, the pressure 0.5 Mpa ) 4. Built-in miniature transformer, no need of external high voltage wiring safety design, no electromagnetic interference, no danger of electric shock. 5. The emitter needle can be replaced, and it can prolong the using life of the whole machine, optional throttle valve, control air flow. 6. A variety of connectors can be selected to meet the requirements of a variety of occasions. 7. It meets the safety standard requirements of CE FCC.
1. The grounding system is the most common and effective way to ensure the ESD safety of a process. Equipment Ground Monitor 001-9035SC is a comprehendive real time groud monitor that check the connection of equipment to grounds. It provides independent ground monitoring of up to four tools. It solved the problem of the damage which caused by the ground wire corroded, loose etc. And also saved the time and labor costs for regular inspections of ground connection. 2. Equipment Ground Monitor can continuously monitor the grounding status of equipment, ESD grounding system and resistance of equipment casing. 3. It provides independent ground monitoring of up to four tools. 4. 24 hours real-time monitor 5. Audible Alarm will enable when the resistance is over the limited resistance, and the audible alarm also could be disabled. 6. Specific limits of resistance can be set according to customer requirements to accurately control the grounding system. If no requirements are specified, default ground impedance is set at the factory. 7. The monitoring resistance group can be set in the range of 0 - 25 , accuracy 1% 8. Optional monitoring software platform to realize remote monitoring and data processing. 9. Wireless transmission or RS485 communication mode, suitable for different working conditions. 10. With alarm indicator, which can add external red and green LED alarm indicator. 11. Built-in LCD display which can display the resistance of setting value, testing value and monitoring status.
1. Monitor the real time connection and disconnection of ESD table mat to ground. 2. Monitor the real time connection and disconnection of wrist strap to ground, under the guarantee of double to ground, the path integrity of ESD to ground is more ensured. 3. Monitor has the fool-proofing function, red LED will flash and comes with audible alarm after power monitor on, plug wrist strap and connect proper ground, green LED will illuminate. 4. Plug wrist strap into monitor socket, monitor will alarm when wear wrist strap abnormally 5. Monitor will alarm when wrist strap is in open circuit or poor contact 6. Monitor 1 single wrist strap and 1 table mat simultaneously 7. Accuracy: + / - 10% 8. When monitor alarm, red LED light flashes and also comes with buzzer sounds 9. Suitable for any kind of single wrist strap 10. Beautiful appearance, strong anti-interference ability
1. Real time monitor single wrist strap grounding function 2. Monitor has OFF function, dial switch to ON, red light illuminate and monitor will turn green while connect wrist strap 3. Plug wrist strap into monitor socket, monitor will alarm when wear wrist strap abnormally 4. Monitor will alarm when wrist strap is in open circuit or poor contact. 5. Monitor will alarm when grounding cord is in open circuit accidentally 6. Monitor 1 single wrist strap and itself grounding cord 7. Wrist strap alarm limit: 1.2 M ( factory preset ) 8. Accuracy: 10% 9. When monitor alarm, red LED light flashes and also comes with buzzer sounds. 10. Suitable for any kind of single wrist strap 11. Beautiful appearance, strong anti-interference ability
001-0385 surface resistivity meter is designed according to ANSI / ESD S20.20, IEC61340-5-1, JESD 625-B, CECC AST & UL test rules. It is used to measure all conductive, anti-static and dissipative material s resistivity and ground resistance. This meter uses ASTM D-257 parallel bar induction method, and automatically calibrates the range through high speed op-amp. It is easy to use and has high reliability. Applications include engineering, maintenance, quality control, incoming inspection, manufacturing and training.
