Shenzhen Telecom Racks Suppliers and Manufacturers

Port 30w per port 19" poe midspan injector • ieee802.3at detection • full power 250w: 30w per port • full protection otp, ocp, ovp • 1, 4, 8, 16, 24 ports optional Security cctv camera 1pcs/box

Rack

Bend-Insensitive Fiber Jumper Cables are used in a variety of carrier networks and private network environments. The key to manufacturing high-performance fiber assemblies is controlling polish radius, apex offset and fiber undercut. Bend Insensitive is less attenuation compared with traditional fiber cables and this will make the installation and maintenance of the fiber cables more efficient. In FTTH networks, people require the fiber cables to be bend-insensitive, so that it is easier to deploy in the house. Another benefit we can get from bending insensitive fiber cables is they are space saving, this is also the trend of future fiber optic network - smaller, denser and more efficient. Many companies are able to provide the bend insensitive fiber optic cables before theofficial standard ITU-T-G657 was made. Bend insensitive cable support installation with small cable bending radius and compact organizers. Protection Riser and Plenum rated bend-insensitive jacket options available Available in simplex, dual-round and dual zip-cord configurations Access Compact jacket design minimizes cable pile up Industry standard terminations include ST, SC, FC, LC (ask a Clearfield representative for other connector availability) Investment Indoor Bend-Insensitive Fiber Jumper Cables offer an economical solution for deploying fiber in any optical network Environmentally stable, low-insertion loss, minimal back reflection All assemblies are 100% tested Technical Specifications Core Size and Type Singlemode (G.657.A1 and G.657.A2) Fiber Count Simplex (1-fiber) and Duplex (2-fiber) Jacket O.D. 2.0 mm Cable Types Indoor Riser Connector Types SC/UPC, SC/APC, LC/UPC, LC/APC, FC/UPC, FC/APC, ST/UPC Operating Temperature -40°C to 85°C (-40°F to 185°F) Minimum Performance Specifications for Terminated Multimode Connectors Connector Type Ferrule Material Polish Type Ins. Loss Typical (dB) Max. Ins. Loss (db) ST Ceramic PC 0.25 =0.50 SC Ceramic PC 0.25 =0.50 FC Ceramic PC 0.25 =0.50 LC Ceramic PC 0.25 =0.50 Applications · Date centre · Telecommunication networks · CATV · LAN and WAN · FTTX · Broadband networkDate centre

100G CWDM 10KM CFP4 Optical Transceiver ITEM NO.:ECP4XX10A-3LCD10 DATA RATE:100G WAVE LENGTH:CWDM DISTANCE:10KM CONNECTOR:LC FIRST:SM DDM:YES PRODUCT ORIGIN:China SHIPPING PORT:Shenzhen Package type: Individual package or 10pcs/package Features Compliant with 100GBASE-LR4 Support line rates from 103.125 Gbps to 111.81 Gbps Integrated LAN WDM TOSA / ROSA for up to 10 km reach over SMF Digital Diagnostics Monitoring Interface Duplex LC optical receptacle No external reference clock Single 3.3 V power supply Case operating temperature range:0°C to 70°C Power dissipation < 6W Applications  Local Area Network (LAN) Data Center Ethernet switches and router applications Standard Compliant to IEEE 802.3ba Compliant to CFP MSA CFP4 Hardware Specification Compliant to CFP MSA Management Interface Specification

10G SFP+ CWDM 60km Transceiver 1270~1330nm LC SM Duplex DDM Optical Module

CWDM SFP Transceiver The transceiver consists of three sections: a DFB laser transmitter, a APD photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. It is compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA)1, also with Fiber Channel per FC-PI-2 Rev. 10.0. Also simultaneously compatible with Gigabit Ethernet as specified in IEEE Std 802.3Z. Product Features Form type: SFP Data rate: 155Mbps, 1.25Gbps, 2.488Gbps, 4.25Gbps Transmission Distance: 40KM, 80KM, 120KM Wavelength: CWDM Wavelength Cable type: SMF Interface: Duplex LC/UPC DDM Support: Yes Operating temperature: Commercial: 0°C to +70°C Voltage: 3.3V Industrial: -40°C to +85°C Regulatory Compliance: CE,FCC,ROHS COMPLIANT, SFP MSA and IEEE802.3Z Applications ��Switch to Switch Interface ��Fast Ethernet ��Switched Backplane Applications ��Router/Server Interface ��Other Optical Links Ordering Information Part Number Data rate Transmission Distance Center Wavelength Average Output Power (dBm) Receiver Sensitivity (dBm) SFP-Cxx03-12 155Mbps 80KM CWDM DFB 0 ~ 5 �-34, PIN SFP-CXX03-15 155Mbps 120KM CWDM DFB 1 ~ 5 �-37, APD SFP-CXX24-L4 1.25Gbps 40KM CWDM DFB - 5 ~ 0 �-23, PIN SFP-CXX24-L8 1.25Gbps 80KM CWDM DFB 0 ~ 5 �-23, PIN SFP-CXX24-12 1.25Gbps 120KM CWDM DFB 0 ~ 5 �-31, APD SFP-CXX48-L4 2.488Gbps 40KM CWDM DFB -5 ~ 2 �-18, PIN SFP-CXX48-L8 2.488Gbps 80KM CWDM DFB 0 ~ 5 �-28, APD SFP-CXX4G-L4 4.25Gbps 40KM CWDM DFB -5 ~ 2 �-18, PIN SFP-CXX4G-L8 4.25Gbps 80KM CWDM DFB 0 ~ 5 �-28, APD

Fiber atenuador fibra optica are used for reducing the power of the light in the fber optic network. We supply many types fiber optic attenuators, fixed value fiber optic attenuator refer to the attenuator that reduce the power of fiber light at a fixed value loss, for example, 2dB. Wile adustable fiber optic attenuator can generate adjustable loss to the fiber optic link. Sophenol offers male to female type fixed attenuators which are available in different connector types, such as LC, SC, FC, ST, E2000 and in different attenuation level from 1dB to 30dB. All our attenuators are manufactured according to industry standards and are 100% fully tested. Features: ·Simple and reliable structure ·Good reliability and stability ·High Return Loss ·Fixed, Variable and In-line type Applications: ·CATV&LAN ·Telecommunication Network ·FTTH ·Passive Optical Network ·Test Equipment ·Parameter: ·Attenuation Tolerance(dB) 1-10dB

Specifications: Housing: high temperature thermoplastic Shell: phosphor bronze protects against EMI/PFI interference Contact: phosphor bronze ,phosphor bronze with 3 to 50u” gold plate Available in CAT.5E or CAT.6 T568A/T568B wiring, meeting every cabling international requirement Accept 22-26 AWG solid with a insulation diameter of 0.4-0.6mm Insertion life :MIN 750 matching recycles Contact resistance: no more than 2.5mO under normal atmospheric pressure Electrical: Voltage rating: 125V AC rms Current rating: 1.5Amp Contact resistance: 100m Ohms (maximum) Insulation resistance: 1,000M Ohms (minimum) at 500V DC Dielectric strength: 750V AC rms, 60Hz and one minute Environment: Storage temperature: -40 to +85°C Operating temperature: 0 to 70°C Mechanical: Housing material: PC UL94V-0 Inner material: flame-retardant ABS UL94V-0 PCB material: FR-4 Thickness: 1.6mm Contact material: phosphor bronze stamp and PIN T=0.35mm IDC contact material: phosphor bronze, T=0.50mm with nickel plating Wire: 24 to 26AWG

The MPO/MTP is a multi-fiber patch cord suitable for high-density back plane and Printed Circuit Board (PCB) solutions in data and telecom systems . Used in transmitters and receivers , this connector offer up to 12 times the density of standard connectors , providing significant space and cost savings . Precision molded MT ferrules , together with metal guide pins and precise housing dimensions ensure fiber alignment when mating. Mass termination is combinations of 4 , 8 or 12 fiber ribbon cables are available . Single-mode versions are offered with premium low-loss or standard and multimode versions are also available. Cable types include bare fiber ribbon and ruggedized ribbon (PVC Jacketed) . Push-pull latching mechanism with audible click ensures proper connection . Applications : • Telecommunication • CATV • LAN&WAN • Broadband • FTTX Features: • Push-On/Pull-Off latching connector • Either 4 , 8 , 12 & 24 fibers available • Bare fiber ribbon type , ruggedized type and fan-out cord available • Precision guide oin assures fiber alignment at mating • Meet IEC61754 , TIAFOCIS 5/604-5 , bellcore GR-143 requirements • High density and economical solution for mass termination fiber Advantages : • No on-site assembly necessary • Simple reconfiguration • High Packing fraction • Various Configurations

Fiber Optics PLC Splitters provide a cost effective and space saving product suitable to the ever changing networking requirements. With it's compact size,these splitters can be utilized in in-ground and aerial pedestals as well as rack mount systems. Installation is simple using a variety of connector types or fusion splicing. Sophenol supply Planar Lightwave Circuits which are key components used in FTTx networks. We supply the PLC splitters including 1XN to 64 and 2XN to 32 types, they are with a wide range of working wavelength from 1260nm to 1620nm. The PLC splitter can be with optional various kinds of connectors and cable length, they feature compact size and very good optical performance. Features: •Value-added Modules for FTTx •0.9/2.0/3.0mm Input and Output •Fan-out Type Available •Compact package Convenient for Small Application & High Density Areas •Telcordia GR-1209 & GR-1221-CORE Compliant •Jacketing Material Rated to -40 to +85 degree Celsius Operating Temperature •Bend Insensitive G657A fiber •Low Insertion Loss and PDL •High Polarization Extinction Ratio & Excellent Uniformity •Offer Unique Designs and Configurations & Support Industry Standard Applications Applications: •FTTx Deployments (GPON/BPON/EPON) •CCTV/CATV Links •Access/Metro Networks •Long Haul Telecommunications

Feature and function: 1.Comply with ansi/eia, rs-310-d;iec297-2; din4191:part1; din41494: part7; gb/t3047.2-92 standard, compatible with 19" international standard, metric system and etsi standard. 2.Knockdown and simple design, low cost, easy installation 3. Optional accessories(cable management, wire management, cantilever shelf, drawer flat) 4.19"frame, made by 2mm profiled steel, perforated at both sides Color:ral9004/ral7035 Pp+foam+carton

Specifications: 1). Size: L2700*W1000*H4500mm 2). Level: 3level beam then 4level goods,level-hight can be adjustable freely 3). Loading Capacity: 600~5000kg/level 4). Finished: Powder coated 5). Be fit for: Pallet goods with pallet size 1200*1000mm Notes: 1). This rack can be dismantled and assembled freely by yourself; 2). This rack can be made as per customer's special requirements:size,level,loading capacity,pallet size and powder coated color etc.

Specifications: 1). Size: L2700*W1000*H4500mm 2). Level: 3level beam then 4level goods,level-hight can be adjustable freely 3). Loading Capacity: 600~5000kg/level 4). Finished: Powder coated 5). Be fit for: Pallet goods with pallet size 1200*1000mm Notes: 1). This rack can be dismantled and assembled freely by yourself; 2). This rack can be made as per customer's special requirements:size,level,loading capacity,pallet size and powder coated color etc.

1). Size: based on pallet size 2). Level: to order 3). Loading Capacity: to order 4). Finished:Powder coated 5). Be fit for: with pallets to put goods Notes: 1). This rack can be dismantled and assembled freely by yourself; 2). This rack can be made as per customer's special requirements:size,level,loading capacity,pallet size,powder coated color etc.

Specifications: 1). Size: to order 2). Level: to order 3). Loading Capacity: 100~1000KG/two cantilevers 4). Finished:Powder coated 5). Be fit for: Directly put long products. Notes: 1). This rack can be dismantled and assembled freely by yourself; 2). This rack can be made as per customer's special requirements:size,level,loading capacity,powder coated color etc.

Size:to order Color:to order.

Specifications: 1). Size: L2000*W600*H2000mm 2). Level: hen 4level goods,level-hight can be adjustable freely 3). Loading Capacity: 100~200kg/level 4). Finished: Coated 5). Be fit for: Directly put goods on it Notes: 1). This rack can be dismantled and assembled freely by yourself; 2). This rack can be made as per customer's special requirements:size,level,loading capacity and powder coated color etc.

Specifications: 1). Size: L2000*W600*H2000mm 2). Level: 4level board then 4level goods,level-hight can be adjustable freely 3). Loading Capacity: 300~500kg/level 4). Finished: coated 5). Be fit for: Directly put goods on it Notes: 1). This rack can be dismantled and assembled freely by yourself; 2). This rack can be made as per customer's special requirements:size,level,loading capacity and powder coated color etc.

You can use the 28mm(D) pipe to make any rack, trolley, bench table etc by your requirement .

Smt magazine rack