Liquid silicone.
Multicrystalline silicon wafers 1.Material: multicrystalline silicon 2.Growth method: directional solidification 3.Conductivity type: p-type (boron doped), astm f42 4.Oxygen concentration: n 1, 0x1017 at./cm3, astm f 121 5.Carbon concentration: n 1x1018 at./cm3, astm f 121 * oxygen content measurement by astm 1188 and used calculation coefficient for ppm atomic is 4, 9 and and for at/cm3 is 2, 45e+17. 6.Square side: (156.0 0.5) mm 7.Symmetry as per the drawing in the enclosure no. 1 8.Thickness: (200 30) µm, astm f 533 9.Ttv: < 50 µm, astm f657 10.Bow < 50 µm, astm f 534 11.Surface saw damage depth µm < 20 (< 15 typically) 12.Saw traces µm 2 µs, astm f 28 15.Surface: as-cut and cleaned; visible contamination, oil or grease, finger prints, soap stains, slurry stains, epoxy/water stains, cracks are not allowed; edge chips under 1 mm from the edge of the wafer are allowed. . 16.Customer may request to receive reference samples 17.Wafers are being stacked into batches of 50-100 wafers each. Then it is sealed into polyethylene film. Protective paper among wafers is upon customer request. 500 -600 wafers in total are being packed into styrofoam box. Styrofoam boxes are being packed into pasteboard cases. Wafers are being packed in such a manner as to ensure minimal damage to the product during transportation. 18.All polystyrene boxes of wafers are identified with: box number; type of wafer; number of wafers per box; all contributing ingots numbers; thickness of wafers; date of packing / output inspection. Geometry: Square side angle:900, 5 Chamfer: 1, 5 mm0, 5mm at 452
Silicone homeware product.
Saw filters, saw resonators and wafers.
Special metals, alloys, compounds, sputtering targets, evaporation materials, crystalloids, wafers and cusotmized metal parts.
Silicone teething necklace, baby products, silicone products.
Silicone rubber, RTV-2 molding silicone rubber, life casting silicone, silicone insoles making silicone.
Silicone lunch box; silicone bag, silicone wrist, silicone cup, cake molder, ice tray, sticky phone screen cleaner.
RTV-2 silicone rubber, silicon, silicone rubber, RTV silicone rubber, liquid silicone rubber, condensation silicone rubber, silicone rubber for mold making, silicone rubber for manaul mold making, silicone rubber for pad printing, silicone rubber for potting compound, platinum cure silicone, addition cure silicone rubber.
High Quality Transparent Molded Silicone Rubber for Kitchen Ware and all kinds of molded silicone products. Description GFD2071P series is fume type general purpose silicone rubber with shore A hardness 30,40,50,60,70,and 80.These products are suitable for compression molding and extruding. Features Excellent process ability Excellent mechanical and electrical properties High tensile strength FDA & FLGB grade Applications Kitchenware, bakeware Skin cover for mobile devices Tubes, sealing Product Data Item Standard (GB/T) 2031P 2041P 2051P 2061P 2071P 2075P 2081P Appearance Transparent Linear shrinkage (%) 130mm 130mm 3.6 3.6 3.5 3.5 3.4 3.3 3.3 Hardness (Shore A) 531.1-2008 31 42 51 62 71 75 81 Tensile strength (MPa) 528-2009 8.2 10.2 10.4 10.1 10.0 9.7 9.0 Elongation (%) 528-2009 759 652 570 462 369 310 205 Tensile set (%) 528-2009 6.0 3.6 4.0 5.6 5.2 3.6 2.8 Tear strength (KN/m) 529-2008 24 28 32 32 31 28 26 Curing agent: C-15, 2%; Curing condition: 170 ºC 10mins, Post cure: 200 ºC 4 hours Storage: Store in a cool and dry place, out of direct sunlight Package: 20Kg/carton or 600Kg/box
RTV-2 molding silicone rubber, silicone rubber for manual model design, shoe sole mold silicone rubber, silicon oil, pad printing silicone rubber, encapsulate and potting compound, silicone rubber for LED display, electronic thermolysis ointment, thermal conductivity silicone, special silicone rubber for CPU, silicone tube, silicone membrane, silicone sealant, liquid silicone rubber, addition cure RTV silicone rubber, HTV silicone rubber, solid silicone rubber, gross rubber, silicone rubber sheet, hot stamping silicone plates, liquid silicone, hot stamping silicone roller.
Silicone Products.
Silicone bras, invisible cloth bras, silicone lace bras, nipple covers, silicone inserts, panties lingerie corsets and other underwear.
Silicone products like silicone rubber, RTV-2 molding silicone rubber, silicone rubber for manual model design, shoe sole mold silicone rubber, silicon oil, pad printing silicone rubber, encapsulant and potting compound, silicone rubber for LED display, electronic thermolysis ointment, thermal conductivity silicone, special silicone rubber for CPU, silicone tube, silicone membrane, silicone sealant, liquid silicone rubber, addition cure RTV silicone rubber, HTV silicone rubber, solid silicone rubber, gross rubber, silicone rubber sheet, hot stamping silicone plates, liquid silicone, hot stamping silicone roller.
Silicone, silicone rubber, silicone products, rtv-2 silicone rubber, moulding silicone rubber, pad printing silicone rubber, manual moulds silicone rubber, liquid silicone rubber.
Plastic & Silicone Product.
Mold Manufacturing, Plastic Parts, Cnc Parts ,Silicone Parts..
Silicone And Pvc Product.
