Flyin optronics' coarse wavelength division multiplexer (cwdm) utilizes thin film coating technology and proprietary design of non-flux metal bonding micro optics packaging. It provideslow insertion loss, high channel isolation, wide pass band, low temperature sensitivity and epoxy free optical path. Features: Low insertion loss Wide pass band High channel isolation High stability and reliability Epoxy-free on optical path Access network Applications: Line monitoring Wdm network Telecommunication Cellular application Fiber optical amplifier Acess network Parameter 4 channel 8 channel 16 channel Mux Demux Mux Demux Mux Demux Channel wavelength (nm) 1270~1610 Center wavelength accuracy (nm) ± 0.5 Channel spacing (nm) 20 Channelpassband (@-0.5db bandwidth (nm) > 13 Insertion loss (db) = 1.6 = 2.5 = 4.5 Channel uniformity (db) = 0.6 = 1.0 = 1.5 Channel ripple (db) 0.3 Isolation (db) Adjacent N/a > 30 N/a > 30 N/a > 30 Non-adjacent N/a > 40 N/a > 40 N/a > 40 Insertion loss temperature sensitivity (db/° c) < 0.005 Wavelength temperature shifting (nm/° c) < 0.002 Polarization dependent loss (db) < 0.1 Polarization mode dispersion < 0.1 Directivity (db) > 50 Return loss (db) > 45 Maximum power handling (mw) 300 Operating temperature (° c) -5~+75 Storage temperature (° c) -40~85 Package dimension (mm) L100 x w80 x h10 L142 x w102 x h14.5
Flyin optronics' coarse wavelength division multiplexer (cwdm) utilizes thin film coating technology and proprietary design of non-flux metal bonding micro optics packaging. It provideslow insertion loss, high channel isolation, wide pass band, low temperature sensitivity and epoxy free optical path. Features: Low insertion loss Wide pass band High channel isolation High stability and reliability Epoxy-free on optical path Access network Applications: Line monitoring Wdm network Telecommunication Cellular application Fiber optical amplifier Acess network Parameter4 channel8 channel16 channel MuxDemuxMuxDemuxMuxDemux Channel wavelength (nm)1270~1610 Center wavelength accuracy (nm)± 0.5 Channel spacing (nm)20 Channelpassband (@-0.5db bandwidth (nm)> 13 Insertion loss (db)= 1.6= 2.5= 4.5 Channel uniformity (db)= 0.6= 1.0= 1.5 Channel ripple (db)0.3 Isolation (db)AdjacentN/a> 30N/a> 30N/a> 30 Non-adjacentN/a> 40N/a> 40N/a> 40 Insertion loss temperature sensitivity (db/° c)< 0.005 Wavelength temperature shifting (nm/° c)< 0.002 Polarization dependent loss (db)< 0.1 Polarization mode dispersion< 0.1 Directivity (db)> 50 Return loss (db)> 45 Maximum power handling (mw)300 Operating temperature (° c)-5~+75 Storage temperature (° c)-40~85 Package dimension (mm)L100 x w80 x h10L142 x w102 x h14.5
E-link LNK-FS800M is a nine ports managed 100M all optic fiber switch. It offers eight SFP fiber ports access and one Gigabit Combo port (1000M SFP port and 10/100/1000M adaptive RJ45 Ethernet interchange) uplink. LNK-FS800 supports SFP modules hot plug, and supports to work with fiber switches, fiber converters and other devices witch fiber ports. It supports WEB management as a managed switch; It applies to security system, electric system, traffic system requirements. Parameter Specification Standard IEEE802.3 10Base-T Ethernet,IEEE802.3u 100Base-TX/FX Fast Ethernet, IEEE802.3ab 1000Base-T, IEEE802.3z 1000Base-SX/LX Gigabit Ethernet, IEEE802.1d Spanning Tree Wavelength 850nm/1310nm/1550nm Distance 100M SFP: Depending on SFP Module Cat5:100m Port 8 SFP fiber ports: 100Mbps 1 Gigabit Combo port:1 Gbps, 1000M SFP&10/100/1000M RJ45 MAC 8K Buffer memory space 1Mbit Bit error rate
LNK-1400P-SFP Series 10/100Mbps copper to fiber switch provides IEEE 802.3af/at Power Sourcing Ethernet (PSE) functionality on the 4 twisted pair ports, supplying both data and electric current to devices such as WiFi access points, VoIP phones and IP security cameras. It is an ideal solution when PoE-powered network devices need to be installed further than the 100 m / 300 ft. LNK-1400P-SFP supports 100M Ethernet Port and 100M SFP Port. The Ethernet port supports both half-duplex and full-duplex mode. Users can use different type of SFP modules (single-mode/multi-mode fiber, 1/2 core) as needed. Standard Packaging: Carton packaging(Support customer Logo)
LNK-IMC1100-SFP is a microtype media converter that supports external SFP modules and meets EN55022. It is an industrial product whose operating temperature range is -40℃ to 80℃. LNK-IMC1100-SFP supports 100M Ethernet port and 100M SFP port. The Ethernet port supports both half-duplex and full-duplex mode. LNK-IMC1100-SFP is the same at the transmitter or receiver sides. Users can use different type of SFP modules (single-mode/multi-mode fiber, 1/2 core) as needed. This Sleek Microtype design media converter occupies limited space and it's an ideal solution for easy installation within most camera housings. Ethernet Standards: IEEE802.3u 100Base-TX/FX IEEE802.3x Flow Control Processing Type: Forward Half-duplex, Full-duplex Forward Filter Rate:: 148,800pps (100Mbps) Cabling: 100Base-TX: Cat5 or above Maximum Distance: Cat5 UTP up to 100m Connector: 1x RJ45 Optical Port: 1 x SFP 100Base-FX Environmental Operating Temperature: -40°C to 80°C (-40°F to 176°F) Storage Temperature: -40°C to 85°C (-40°F to 185°F) Relative Humidity: 5% to 95% non-condensing MTBF: > 300,000 hrs Electrical and Mechanical Input Power: 12VDC (Terminal Block) Power Consumption: 2.4W Max. 0.2A@12VDC LED Indicators Power: Power Status 100TX: Link/Activity, Speed SFP: Link/Activity Dimensions (WxDxH): 36.2 x 117 x 24.5 mm Weight: 0.15Kg Casing: Aluminum Case Mounting Options: Wall-mount / LNK-MR-C10 1U Rack Regulatory Approvals ISO9001, CE, FCC, RoHS FCC part 15,Class A EN55022:2006+A1: 2007 Class A Surge Protection: RJ45: 1KV Power: 500V ESD: 4KV/8KV Standard Packaging: Carton packaging(Support customer Logo)
Optical Line Protection (OLP) system is a new optical line protection subsystem developed with advanced technology of dynamic and synchronous optical switches. When communication quality is lower or equipment breaks down due to accidental fracture or bigger loss of optical fiber in the optical transmission line, the OLP system can switch the primary line to the secondary line within a short time, to ensure normal operation communication of line, which effectively prevent fiber or equipment fault and shorten the recovery time from hours to milliseconds. Optical Line Protection switch provides both Manual and Automatic switching mode. In Manual mode, the system switches optical path only based on the commands from user. In the Automatic mode, the system switches based on the power level detected and the preset threshold. Under automatic mode, the system can be set to be revertive or Non-revertive modes. Under Revertive mode, the system switches back to the working path automatically after the fault condition is cleared. Under Non-revertive mode, the system does not switch back. The OLP models fit HT6000 Series CH04, CH08, CH20 Chassis.
EDFA Optical Amplifier module provide multi-function, low noise, Erbium-Doped Fiber Amplifier (EDFA) solutions, The amplifier module can be operated at constant gain (Automatic Gain Control AGC), constant output power (Automatic Power Control, APC). Integrated VOA can be automatically adjusted to achieve smooth gain spectrum. It can amplify the C-Band signal with or w/o middle stage access (MSA), which brings great flexibility for the network application. C-band optical signal overall amplification Covering the wavelength range of 1528 ~ 1565nm Support systems to achieve different cross-section radio repeater transmission Wide operating wavelength range:1528nm~1565nm Three Optical Amplifier C-Band applications: Booster ï??n-line Pre-amplifier Low noise figure: typical: 5dB Excellent gain flatness Multiple operating modes: AGC adjustable Gain APC output is adjustable ACC voltage adjustable Mid-stage access for DCM or OADM Optional OSC channel for remote management MON port, on-line monitoring optical power and OSNR Many model options serve all the traditional amplifier applications in an extended optical link: booster, in-line, and pre-amplifier. A booster amplifier operates at the transmission side of the link. It features high input power, high output power, and medium optical Gain . Boosters are designed to amplify aggregated optical input power for reach extension. An in-line amplifier operates in the middle of an optical link. It features medium to low input power, high output power, high optical Gain , and a low noise figure. In-line amplifiers are designed for optical amplification between two network nodes on the main optical link. A Pre-amplifier operates at the receiving end of an optical link. It features medium to low input power, medium output power, and medium Gain. Pre-amplifiers are designed for optical amplification to compensate for losses in a demultiplexer located near the optical receiver. Some EDFA Models include an additional mid-stage port designed for insertion of a Dispersion Compensation Management (DCM) unit without its inherent insertion loss. The design of these models maximizes the DCM benefits to increase deployment flexibility. New placement options require fewer amplifiers in the link, and they can open the door to applications that were not possible with older technology. Some EDFA Models include a Red and a blue port designed for Single fiber DWDM Solution. The design of these models is used for single-fiber DWDM transmission systems.
EU Standard Light Wall Touch Switch ,1 gang waterproof toughened glass panel For Wall Light 1. 1gang has one button, 2gang has two button, 3gang has 3 button, please know that! 2.We have Black/White/Golden Color for choosing. 3.We have UK/EU /US/AU Type, OEM &ODM orders are available for us. Load Power: 5-300W / gang,800W total, incandescent lamp 5-300w, LED lamp 5-200w, less than 6 combined lamps. Feature: 1.Toughened crystal glass panel design, no fading, looks elegant and stylish 2.With blue LED indicator, very distinguished, more humanization design. 3.E-start, no sparking contacts. 4.Brand new imported American IC intelligent chip, more sensitive on touch 5.Protection of over-current, anti-interference. 6.Touch control ensures longer service life than traditional switch 7.Single live wire control, easy to install, replace the old switch directly. 8.More humanization design: the lamp is off when the incoming of electricity again, save electricity. 9.Widely used for home, villa, hotel, office, hospital and so on.
Touch Switch Wireless Wifi Light Switch EU Standard Smart Switch 90-240V support Alexa/google home Item Type Switches Certification RoHS, FCC, SAA, ce Warranty 1 year Switch Type APP Control Model Number EU-W301W Features wifi switch Material Plastic Current 5A Color white/black/golden Panel Material Tempered Crystal Glass Panel Operating Environment -20~70 centigrade Size 86*86mm Voltage AC90-240V/50-60HZ Load Power 1-500W / gang 800W total Power Supply Live Wire+ Neutral Wire Self Power Consuming Less than 0.1mA Switch Type Wall Light Wifi Switch Features: Wi-Fi Touch Wall Switch This touch switch supports maximum power of 2200W that can work with most lights and other electric appliances. In-wall smart switch, the touch screen buttons are quieter and more secure. APP Remote Control User can use a smartphone to remotely control turn on / off home electronics at anytime and anywhere via APP as long as the phone has 2G/3G/4G signal and WIFI network. It makes your home appliances smart in 1 second. Compatible with iOS and Android OS. Premium Quality Made of flame-resistant ABS shell and toughened glass panel that ensures a good durability. Luxury and fashion design that can be well fit into most houses with different decorate style. More Intelligent User can control this WiFi switch via voice through Alexa / Google device to turn on/off the light. These make the operation more convenient and more intelligent. Strong Function Support timer function,Support multi-player control, one switch can be controlled by more phones (by share function) and one phone can control several switch (Depends on the bearing of the router in practical use).With status memory function once power is cut off. More Features: 1.Toughened crystal glass panel design, no fading, looks elegant and stylish 2.With blue LED indicator, very distinguished, more humanization design. 3.E-start, no sparking contacts. 4.Brand new imported American IC intelligent chip, more sensitive on touch 5.Protection of over-current, anti-interference. 6.Touch control ensures longer service life than traditional switch 7.Single live wire control, easy to install, replace the old switch directly. 8.More humanization design: the lamp is off when the incoming of electricity again, save electricity. 9.Widely used for home, villa, hotel, office, hospital and so on.
86 type wireless remote control switch 220v EU Standard wall light touch switch 1/2/3/gang rf433 smart switch Feature: Toughened crystal glass panel, no fading, elegant and stylish Integrated panel design, waterproof and anti-creeping, safe to use Touch control ensures longer service life than mechanical switch New imported IC processor for nice sensitivity and stable performance Humanized design: The switch can automatically disconnect when electricity breaks and it will be in the OFF station when electricity comes back used for commodity houses, villas, hotels, etc. Description: Type: 1/2/3 Gang 1 Way Remote Control Switch Color: White / Black / Gold Voltage: 170V-240V Load Power: 5-300W / gang,800W total, incandescent lamp 5-300w, LED lamp 5-200w, less than 6 combined lamps. Apply to:Incandescent Bulb, fluorescent lamp, Energy saving lamp, LED lamp Working Temperature: -20-70 Degree Material: crystal tempered glass panel
86 type RF433mhz wireless receiver switch smart touch screen transmitter smart switch diy module, no need rewire Feature: new design touch panel remote control, it looks like a touch switch, in fact, it is RF433 remote control,you can use stickers, sticking anywhere to control the switch.There will be a faint light at night, Convenient to control the light. Pls Noted: the customs don't allow to ship the battery, so the product not including any battery, pls purchase the battery at your local! Receiver(wireless module)product parameters Voltage: AC 90-250V Current: 5A power:500W Glass Panel Remote control product parameters Voltage: 3.6V Battery Type: CR2032(not include) Chip: EV1527 Remote control launch distance: 15M Size: 86mm * 86mm pairing with the remote control: press the button of receiver for few seconds when rings one beep, and press the remote control for learning the signal,finished! one beep for "turn on/off" two beeps for "turn on" three beeps for "turn off" four beeps for "clear up the code"
1x8 Mini Fiber PLC Splitter Quick Details of Mini Fiber PLC Splitter: Place of Origin: Shenzhen, China (Mainland) Brand Name: OPTICO Model Number: PLC Splitter-mini box Item: small mental housing PLC splitter Wavelength: 1,260 to 1,650nm Parameters: 1*2/4/8/16/32/64 Capacity: up to 1 x 64 Compliance: Telcordia GR-1209-CORE GR-1221-CORE Operating temperature: -40â?? to 85â?? MOQ: 200 PCS; Price term: FOB 4~8 usd/pcs; Payment terms: 30% in advance, 70% balance before shipment; Lead Time: 7~12 days Supply Ability: 60,000pcs/month Warranty: two years; Description of Mini Fiber PLC Splitter: Small mental housing PLC splitter is a type of optical power management device that is fabricated using silica optical waveguide technology. It features small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity, and is widely used in PON networks to realize optical signal power splitting. plc splitter supplier Optico provides whole series of 1xN and 2xN splitter products that are tailored for specific applications. All products meet GR-1209-CORE and GR-1221-CORE requirements. Feature of Mini Fiber PLC Splitter: Low Insertion loss Low PDL Compact Design Good channel-to-channel uniformity Wide Operating Wavelength:From 1260nm to 1650nm Wide Operating Temperature: From -40°C to 85°C High Reliability and Stability
This is a new design light touch switch. With luxurious and simple look, the switch fit in different room style well, and enhances the rooms appearance in a degree. The most important is that it allows wet hand operation. Thanks for the switch owns the characteristic of waterproof and fireproof, it can prevent electric shock effective. Main Features: Toughened crystal glass panel, no fading, elegant and stylish Integrated panel design, waterproof and anti-creeping, safe to use Touch control ensures longer service life than mechanical switch New imported IC processor for nice sensitivity and stable performance The remote control Touch switch has the function of long distance remote control, The remote control distance of 20 meters Control by Single live wire, easy for installation, do not need rewiring and replacing the switch before directly Humanized design, The switch can automatically disconnect when electricity breaks and it will be in the OFF station when electricity comes back Widely used for commodity houses, villas, hotels, etc Item Type:Switches Switch Type:Touch On/Off Switch Certification:CE,FCC,RoHS Features:2 gang 1 way Material:Plastic Max. Current:5A Max. Voltage:250V Rated Power:2000W size:85*85*36mm Power Supply:Single Live Line Rated Frequency:50HZ/60HZ Mechanical Life:100,000 Times of Operation Self Power Consuming:Less than 0.1mA Function:Wall Light Switch Touch Screen Control Panel Material:Crystal Glass Panel, High Quality Flame Retard
Main Features: With touch function and remote control function, it is equipped with a remote controller. The remote control switch has the function of long distance remote control, which is up to 100 metres in the open field and can be up to 20 meters indoors, to meet different customer needs . With a gentle touch, it can easily control the light open and close Users touching keys can be issued the sound of "di" , and the prompt to dial the code switch or cancel the prompt function . Used as a night light at night, it can dial the code switch settings or cancel the function of background light . The outer shell is made of fireproof plastic material, effectively preventing switch ignition . Control by live wire, easy for installation, do not need rewiring and replacing the switch before directly . Toughened glass panels, unique design and luxurious beauty . Prevent the occurrence of leakage and electric shock danger . Description: This is a light switch of new generation. The switch with integrated design has waterproof, fireproof function and function of preventing electric shock. It allows wet hand operation. With luxurious and simple look, the switch fit in different room style well, and enhances the rooms appearance in a degree. The touch switch brings the best out of your home without having to break the bank, and is suitable to be used in all rooms of your home, business and establishment.
Main Features: Toughened crystal glass panel, no fading, elegant and stylish Integrated panel design, waterproof and anti-creeping, safe to use Touch control ensures longer service life than mechanical switch New imported IC processor for nice sensitivity and stable performance The remote control Touch switch has the function of long distance remote control, The remote control distance of 20 meters Control by Single live wire, easy for installation, do not need rewiring and replacing the switch before directly Humanized design, The switch can automatically disconnect when electricity breaks and it will be in the OFF station when electricity comes back Widely used for commodity houses, villas, hotels, etc Advantages: Capacitive touch high sensitivity touch Tempered Glass,durability Dirty proof,Easy Maintenance Does not fade over time can be touched by wet hand does not fade,elegant,stylish
Item Type:Switches Switch Type:Touch On/Off Switch Certification:CE,FCC,RoHS Features:2 gang 1 way Material:Plastic Max. Voltage:250V Rated Power:2000W size:85*85*36mm Power Supply:Single Live Line Rated Frequency:50HZ/60HZ Mechanical Life:100,000 Times of Operation Self Power Consuming:Less than 0.1mA Function:Wall Light Switch Touch Screen Control Panel Material:Crystal Glass Panel, High Quality Flame Retard
Item Type:Switches Switch Type:Touch On/Off Switch Certification:CE,FCC,RoHS Features:2 gang 1 way Material:Plastic Max. Current:5A Max. Voltage:250V Rated Power:2000W size:85*85*36mm Power Supply:Single Live Line Rated Frequency:50HZ/60HZ Mechanical Life:100,000 Times of Operation Self Power Consuming:Less than 0.1mA Function:Wall Light Switch Touch Screen Control Panel Material:Crystal Glass Panel, High Quality Flame Retard
Main Features: Toughened crystal glass panel, no fading, elegant and stylish Integrated panel design, waterproof and anti-creeping, safe to use Touch control ensures longer service life than mechanical switch New imported IC processor for nice sensitivity and stable performance The remote control Touch switch has the function of long distance remote control, The remote control distance of 20 meters Control by Single live wire, easy for installation, do not need rewiring and replacing the switch before directly Humanized design, The switch can automatically disconnect when electricity breaks and it will be in the OFF station when electricity comes back Widely used for commodity houses, villas, hotels, etc Advantages: Capacitive touch high sensitivity touch Tempered Glass,durability Dirty proof,Easy Maintenance Does not fade over time can be touched by wet hand does not fade,elegant,stylish
Main Features: Toughened crystal glass panel, no fading, elegant and stylish Integrated panel design, waterproof and anti-creeping, safe to use Touch control ensures longer service life than mechanical switch New imported IC processor for nice sensitivity and stable performance The remote control Touch switch has the function of long distance remote control, The remote control distance of 20 meters Control by Single live wire, easy for installation, do not need rewiring and replacing the switch before directly Humanized design, The switch can automatically disconnect when electricity breaks and it will be in the OFF station when electricity comes back Widely used for commodity houses, villas, hotels, etc Advantages: Capacitive touch high sensitivity touch Tempered Glass,durability Dirty proof,Easy Maintenance Does not fade over time can be touched by wet hand does not fade,elegant,stylish
Item Type:Switches Switch Type:Touch On/Off Switch Certification:CE,FCC,RoHS Material:Plastic Max. Current:5A Max. Voltage:250V Rated Power:2000W size:85*85*36mm Power Supply:Single Live Line Rated Frequency:50HZ/60HZ Mechanical Life:100,000 Times of Operation Self Power Consuming:Less than 0.1mA Panel Material:Crystal Glass Panel, High Quality Flame Retard
