AINiCo is composed primarily of Aluminum Nickel Cobalt and also Copper and Titanium. They are manufactured through either casting or sintering process. Cast AINiCo may be manufactured in complex shapes such as horseshoes not possible with other magnet materials. Sintered AINiCo offer slightly lower magnetic properties but better mechanical characteristics. it can be efficiently magnetized in any direction, and for anisotropic AINiComagnet, it generally has greater magnetic capacitive in a preferred orientation than isotropic types. AINiCo is hard and brittle, Machining or drilling cannot therefore be accomplished by ordinary methods. Holes are usually cored in at the foundry, and magnets are cast close to final size and then finish machined to closer tolerances. â?¢ Advantages of AlNiCo Magnet: 1.Customized designs are available. 2.Max working temperature can be as high as 550�°C. 3.Disadvantage: Br and BH(max)are not as high as rare earth magnet. 4.High energies and relatively low coercivity. 5.High magnetic flux density; low mold charge stable temperature properties; easy to shap.
Samarium Cobalt (SmCo) magnets are made by a sintering process and exist in two forms. The first is Sm1Co5(SmCo 1:5),which has a maximum energy product of between 14 and 24MGOe. The second and more common form is Sm2Co17(SmCo 2:17) which has a maximum energy product of between 22 and 32 MGOe. The main Sm2Co17 alloy is around 35% Samarium (Sm)and 60% Cobalt (Co)with the balance being from varying amounts of lron (Fe) Copper (Cu). Hafnium (Hf) and Zirconium (Zr). Praseodymium (Pr) may also be used. Sm1Co5 is made of only Sm and Co and has excellent corrosion resistance. â?¢ Advantages of SmCo Magnet: 1.Superior resistance to high temperature. 2. Excellent resistance to corrosion, no coating is needed for surface protecting. 3.High working temperature. 4.SmCo is suitable for machines with high magnetic requirements and good for strict working environment requirement.
Ferrite Magnet is manufactured from oxide material by powder metallurgical process. Its advantages include: low-cost excellent corrosion resistance, resistance to be demagnetized etc. The normal working temperature of Ferrite Magnet is between-40C and +250C.It can be magnetized before or after assembling. Generally, Ferrite Magnet can be machined to regular shapes like segments, blocks, rings and discs etc. The normal grades for sintered Ferrite Magnets are Y10,TY25, Y30, Y30BH, Y35, etc. Advantages of Ferrite Magnet: Ferrites have isotropic characteristics, weak magnetic performance, has the same magnetic performance in any direction, multipolar magnetic charge. The main raw material of ferrite is oxides, so it is not corroded by high temperature, high humidity or chemicals (except strong acid and base); with excellent diamagnetic impedance, no flux loss before and after assembly and magnetic charging; working temperature is-40C to + 250C, poor temperature coefficient; Br temperature coefficient is-0.2% /C, 0.2% under Br, etc. per 1 Cincrease; high hardness, wire cutting and grinding; ferrite is brittle and fragile during production and transportation. magnetic requirements and good for strict working environment requirement.
Jewellery machine.
Model No.:BK-0050 Engraved character:0.6-14mm tall, Engraved area:14mm wide(multiple rows), Max.width of rina:14mm.
Easy template installation. Template Producesw letters with heights of 1mm and 2mm. Wide ring holding capacity. Adjustable letter spacing. Shipping weight:7kg.
Operates at speed 5,500-33,000rpm in both forwardd and reverse rotateon, Excellent torque with smooth operation, Complete with handpiece (accepts 2.35 mm shank), Compact size and light weight, Voltage:220V/50.
Operates at speed 5,500-33,000rpm in both forward and reverse rotateon, Excellent torque with smooth operation, Complete with hand piece (accepts 2.35 mm shank), Compact size and light weight, Voltage:220V/50.
Semi-finished silver chain.
Using the type of pressure sensor LCD display with blue backlight(Optional) 60 seconds automatic off with power saving mode Capacity : 100g .200g Readability: 0.01g. 0.01g Unit: g,oz,gn,ct Scale Size: 72*36*12mm Platform size: 40*28mm stainless steel Power: 1*2032(included) N.W: 33g Packing: 100pcs/carton,5.5kg,color box
3D CNC Special -shape Spring Making Machine Machine Parameter Model US-20 US-35 Axis 3 3 Wire Diameter 0.3-2.5mm 0.8-3.5mm Max Outside Diameter 50mm 80mm Wire feeding wheels group 2 3 Wire feeding motor power 2.7kw 5.5kw Cam Motor Power 2.7kw 5.5kw Quil Rota on Motor Power 1kw 1kw Dimension(mm) 1600*700*1700 1650*1100*1900 Weight 1000kg 2000kg Product Description 1. US-20 computer spring forming machine adopts Taiwan computer control system and Japanese imported servo motor, with convenient and fast operation, high speed and high precision 2. It is divided into camshaft, feed shaft, rotary shaft, take-up (optional accessories), and the four axes can run synchronously. 3. There are eight groups of sliders, cams and camshafts in the cam section. The cam plate is fixed on the rotating shaft and can be screwed forward and backward, and used to push the movement of the slider. There are three ways of mechanical action: extrusion, stamping and forming 4. The feeding system is installed on the back of the machine horizontally. There are 2 sets of feeding bobbins, each pair of feeding reels is a pair. The US-20 has only a pair of feeding reels with a thread diameter of 1.0 or less, and can be used with more than 1.0 pairs. Reel. Computer control wire length, the minimum wire feed unit is 0.01mm. Features: wear, minimal noise, high accuracy with the camshaft, rotating shaft. 5. The rotating mandrel can rotate forward and backward, and the curling device is installed on the slide, which can realize multi-rotation positive and negative rotation 6. The rotating mandrel can rotate forward and backward, and the curling device is installed on the slide, which can achieve multi-rotation positive/negative rotation 7. US-20 machine can produce all kinds of tension spring, pressure spring, tower spring, double torsion spring, flat spring and other opposite springs. Can be used in lighting, electronics, toys, home appliances, sports equipment, automotive and other industries need precision springs.
Machine name flake ice machine Model no. Kms-5t Daily capacity 5000kg/24h Ref.Capacity 30kw Reducer power 0.5kw Circulating water pump power 0.25kw Cooling fan power 0.45kw Water pressure 0.1mpa~0.5mpa Total power 23.13kw Compressor power 20.12kw Cooling tower pump 11kw Saltwater pump power 0.016kw Water feed pipe 3/4 Weight 3840kg Unit dimension 5050x2150x2600mm Ice storage size 4000x3500x2500mm Standard ambient temp. +250c Water inlet temp +180c Condensing temp. +400c Evaporating temp. -220c Power supply 480v/3phase/60hz Refrigerant r404a Compressor type bitzer piston compressor Cooling system water cooled condenser Water supply fresh water Flake ice thickness 1.5~2.2mm Plc control display in english Special features of ice machine: 1. Reasonable design for the structure, save space, easy to install 2. Greatly save energy, only 80-85kw powers are consumed to produce one-ton ice. 3. Ice dropping automatically, no ice dropping auxiliary equipment, lower the error rate 4. Special ice outlet, ice outgoing automatically, no need taking ice by hand and ensure the ice clean and sanitary 5. Install as the operation instruction, supply failure alarming system, and no need worker to monitor.
Product Application of Vacuum Cooler 1.Vacuum Cooler is the quickest and most cost-effective cooling system for vegetable, fruits, flowers & more. 2.Vacuum cooler, which can strongly improve your product quality and at the same time reduce your cooling costs, is now becoming an acceptable investment for almost all vegetable growers! 3.Vacuum Cooler cools fresh product quickly and uniformly in large loads within 15-30mins/cycle, also suitable for packed produces. ICEUPS will design and offer the most suitable machine according to clients'requirements. Vacuum Cooler Machine Condenser System Type�? 1) Air condenser:The simplest construction, suitable for small system.Easy to integrate. 2) Water condenser: Low cost, efficient and easy to install. Perfect for most districts climates. 3)Evaporative condenser: Optional system for dry climates, or if water availability is limited.
Chain making machine, jewellery machine.
Jewellery processing machine.
Polishing tools for jewlery making, jewelry equipment.
Jewellery tools and equipment, jewellery machine, jewelry supplies.
Our company have more than 10 years experience with plastic injection moulidng, die-casting, tooling, rubber in china. With advanced CNC milling machine, electric discharge machining, wire-cutting machine, drilling machine, injection machine and skilled engineers.
Our major industrial control products are including all kinds of financial self-help ATM machine, , Queuing for the number machine, the subway is a gate into/out machine, the subway ticket machine, the subway automatic recharge machine, the products also involve in Shenzhen one, two, and three subway line, Guangzhou two, five, and eight subway line, Shenyang, Wuhan, Beijing, Chengdu subway lines.
Metal punch, cold rolling precision tube ( tolerance for inner and outer diameter can be controlled within plus/minus0.01mm), CNC machining, Al, Zinc alloy die casting, hardware welding, tube bending, water heater accessories, solar energy equipment accessories, auto parts, etc.
