Metal cutting fluid In actual production, even high-quality metal cutting fluids must be added with a certain amount of bactericidal and algae-removing agents to extend the service life and increase the utilization rate. PSC80626, whether used as a metal cutting fluid additive, a settling agent or a water-based cutting fluid, can accelerate the sedimentation of metal chips, accelerate the separation of water and oil in the cutting fluid, effectively reduce the growth of bacteria, and extend the life of the metal cutting fluid. PSC80626 is used in fully synthetic metal cutting fluids for water machines, and the amount is very small, and the additive formula can be adjusted flexibly. As a settling agent, it is basically consistent with Buckman's Busan 77 in terms of theoretical map test data, which can completely replace this type of product and has a significant effect in actual use.
Furniture.
Anti-rust/anti-corrosion primer/coating, surface treatment.
Latex for paints.
Coatings.
Water based paints and wallpaper adhesive.
Product data sheet Flutex 10 Product description Type: Latex wall paint, based on acrylic binder, matt. Flutex 10 provides a beautiful finish with a soft gloss. The product is easy to apply and to repaint, and it provides a robust and washable surface that stands spot cleaning. The opacity of tinted colours is indicated on the tinting label. Product application Suitable interior for walls, e.g. in institutions, offices, living rooms and corridors, where the surface is exposed to dirt and/or wear. Technical data Density: 1,35 kg/litre Gloss: 10, matt Solids: Weight%: 56 Vol.%: 40 Spreading rate: 8-10 m2 per litre and treatment£¨depending on the condition of substrate£© Wash ability Top Level (GB/T 9266-1988) Water vapour permeability: Sd= 0.21m equal to class 2, according to EN 7783-2 Application temp.: Recommended min. working temperature during drying/curing: +10¡æ Max. atmospheric humidity 80% RH Drying time at 20oC, 60% RH: Dry to touch: 1 h Recoat interval: 2 h Fully cured: Several days Dilution: 1st coat: Max. 10% water 2nd coat: Undiluted Cleaning of tools etc.: Water Storage: Cool, frost-free and tightly closed. 2.8L & 9.1L.
Flugger data sheet Facade 25 Product description Type: Acrylic emulsion elastomer wall covering facade paint, matt. Flugger Facade 25 is based on acrylic binder with high performance. It provides a weather-resistant, elastic, crack bridging and robust surface. The surface is permeable for water vapour, with a high barrier effect against CO2 and chlorides, which makes it suitable as concrete protection especially in urban environments. Protects the surface against formation of mould. The opacity of tinted colours is indicated on the tinting label. Product application Suitable exterior for finishing treatment on facades of concrete, masonry and plaster etc. Technical data Specific gravity: 1,35 kg/litre Gloss: 9 Solids: Weight%: 58 Vol.%: 43 Spreading rate: 8-10 m2 per litre and treatment£¨depending on the condition of substrate£© Wash ability Top level (GB/T 9266-1988) Application temp.: Recommended min. working temperature during drying/curing: +10¡æ Maximum atmospheric humidity 80 % RH Drying time at 20¡æ, 60% RH: Dry to touch: 1 h Recoat interval: 6 h Fully cured: Several days Dilution: 1st coat: 10% water 2nd coat: Undiluted Cleaning of tools etc.: Water Storage: Cool, frost-free and tightly closed. 2.8L & 9.1L & 18.2L.
Product description Type: Acrylic emulsion primer. Flugger Sealer is formulated with an acrylic micro-dispersed binder with unique penetration properties. Is alkaline resistant and provides an efficient sealing on slightly chalking and absorbent surface. Product application Suitable for interior priming of building materials, e.g. gypsum board, light concrete, limestone, brick, plaster, cement fibre plates, concrete as well as fillers. Technical data Density: 1,01 kg/litre Solids: Weight%: 14 Vol.%: 13 Spreading rate: 3-7 m2per litre depending on the substrate Application temp.: Min. working temperature during application and drying/curing: + 10¡æ Max atmospheric humidity 80 % RH Drying time at 20¡æ, 60% RH: Dry to touch: 1 h Recoat interval: 6 h Fully cured: Several days Dilution: Water Cleaning of tools etc.: Water Storage: Cool, frost-free and tightly closed. 10L.
Product properties Flugger 377 Adhesive roll-on is a PVA-reinforced adhesive, which is transparent when dry. Application For interior hanging of light glass tissues and glass felt. Also suitable for the hanging of light, paper-backed textile wall coverings and for non-woven wall coverings. Also suitable for the hanging of Flugger Structure. Only for use in dry rooms. Technical data Type: Adhesive for tissue wall coverings Density: 1.02 kg/litre Solids: Weight%: 19 Vol.%: 16 Spreading rate: 4-5 m?per litre Application temp.: Min. +150C Cleaning of tools: Immediately with hot water and soap Storage: Cool, frost-free and tightly closed. 3L & 5L & 12L
WX618 Water Base transformation anti-rust priming paintis an advanced product at the international technique level, and it is applicable to the corrosion resistance treatment of the rusted steel parts. It is widely used to the manufacture and maintenance of the equipment in use such as steel structure, tunnel and bridge, establishment of city construction, high-speed road, railway,ship,shipside, petroleum, metallurgy, chemical engineering and so on. It can serve as priming paint treatment with anti-rusting and rust-inhibitoring before painting. It can be used as the paint with anti-rusting and rust inhibitoring alone,too. It possesses excellent corrosion resistence effect and can be combined with kinds of surface and middle paints on the market. Product mechanism: all are anti-rust primer on the market now is to only cover the rust physically. That is to remove the rust by the sand blasting, then coat the surface with anti-rust primer with old technology. This traditional craft can cause the problems posed are: Its only the effect of physically cover on the rust and it can never reach the role as descripted on the specification But WX618 water-based rust transformation primer has chemical reaction with the rust. After 20 minutes of the process, the rust turns into black primer. That is rust is part of the raw materials during this chemical reaction. This primer and the hydrogen bonding interaction between the iron material is the largest. The effect can never be reached by the physically covery as other old primer. Product Advantage of WX-618: 1. The product has sound antirust effect. After coated once or twice, and combined with appropriate surface paints, the surface will not rust against for 10 years longer under nature condition. 2. The material can be operated with rust, replacing conventional processes of manual sandblstering, anti-rusting and rust-inhibitor priming paint. It can save the cost for rust removing and improving the operating efficiency remarkably 3. This product is water base and without harmful substances such as benzene, formaldehyde. The VOC of this product is quite low. It will not bring out powder, dust and smell. This product is good for environmental protection. 4. Operation is convenient; roller, brushing and coating all are applicable 5. It is applied to the complicated corrosion resistance treatment of rusted steel parts, avoiding the remnants of acid liquid in the conventional acid washing method 6. It has the fire resistance Use Method: Paint the rusted iron with WX-618 with brush or spray. After 20 min, the rust turns to black primer. The whole process is just so easy 1kg,5kg,10kg,20kg
Waterproofing coating
Acrylic Emulsion all-around paint provides a weather-resistant and robust surface. High water vapour permeability, with a high barrier effect against CO2 and chlorides which makes it suitable as conrete protection especiallly in urban environments. protects the surface against formation of mould. Suitable exterior as topcoat on facades of concrete, masonry and plaster etc. Also suitable interior, where a matt, ribust surface that does not furbish up(changed gloss) by touching is desired. Suitable: Interior/Exterior Thinner: Water Spreading rade mm/liter and treatment: 8-10 Gloss 60: 5 matt Water vapour permeability 1,2GPa s mm/kg at 100um 10L/bucket
Aluminum pigments (pastes) Average particles ranging from 5 to 60 microns. 25kg/drum (iron)
Epoxy self-leveling floor paint.
Acrylic emulsion.
Epoxy coating.
Outline dimension: 3600(l)*1200(w)*1600(h) Diameter: above 28mm Length: up to 300mm Power supply: ac380v, 50/60hz Air supply: 0.6mp Speed: up to 1000 pcs/h 1> the paint roller machine is one-off completion of cutting, combing, bevelling, shearing and vacuum cleaning. 2> manufacturing customized device according to different diameter and length 3> the machine only needs one person to operate. Wooden case
Paint roller making machine Outline dimension: 6000mm(l) (h)mm Diameter: above 28mm Power: ac380v, 50/60hz Air supply: 0.6mp Average production speed: 2000pcs/h 1> the paint roller making machine has the combination of automatically delivering pipes, unconstant twisting, and automatically sealing, etc. 2> the paint roller making machine is equipped with heating(suitable for pp pipe, flame supervision, temperature adjustment) technology. 3> customized production according to different diameter of pipes and different length of production line 4> approximate output is up to 8 meters of wound tubes per minute.It can produce more than 16, 000 pieces of 9-inch rollers per day(8 hours working time). The gas consumption cost of 9 inches rolling brush is only 0.01 rmb. 5> compared with the similar european devices , our machine is cheaper but with high quality, short investment feedback period and low maintenance fee. 6> this paint roller making winding machine needs only one person. Wooden case
Feature Drive headsteel fabricated enclosure inside which is installed the drive assembly consisting of a set of balanced pulleys, v belts, electric motor and motor tensioning device. The drive head is of hinged type construction which can be opened for maintenance.Main shaft and grinding basketss 304 shaft duly machined and balanced is provided. The shaft is installed in a bearing housing provided with taper roller bearings. Lubrication points are provided on the housing. The grinding basket is made from special steel to withstand high wear and tear. The double jacket cooling grinding basket is optional. Main technical data Type Power (kw) Speed (rpm) Batch capacity (l) Pump power (kw) Basket volume (l) Lifting height (mm) Esbm-4.0 4 0í½1450 30í½100 0.55 2 600 Esbm-7.5 7.5 0í½1450 50í½200 0.75 4 700 Esbm-11 11 0í½1450 80í½250 .1.1 6 800 Esbm-15 15 0í½1500 150í½350 1.1 10 900 Esbm-18.5 18.5 0í½1450 250í½500 1.1 16 1000 Esbm-22 22 0í½1450 500í½800 1.5 20 1100 Esbm-30 30 0í½1450 800í½1000 1.5 25 1200 Esbm-37 37 0í½1000 1000í½1200 2.2 37 1300 Esbm-55 55 0í½1000 1300í½1800 2.2 51 1500 Esbm-75 75 0í½800 1800í½2500 4.0 75 1600 1set/wooden case
