Cartridge heater is one of the tubular heating elements. The heating part is a nickel-chromium heat-resistant alloy wire wound on a magnesium oxide core rod with excellent insulation and thermal conductivity. Between the heating wire and the outer sheath is high-purity magnesium oxide powder as an insulating material, and the air inside is compressed by the machine Into a cartridge heater.
After the main body of the cartridge heater is completed, fixed accessories or threads can be installed according to customer needs. There are many types of fixed accessories or thread structures. Please contact our sales or technical personnel for the best solution.
Advantages:
Small diameter, can be 3-35mm;
The length is not limited, it can be 20-2000mm;
The power is high, which is 2-5 times the power of the normal electric heating tube, and it can achieve a surface area of 20 watts/square centimeter; even a surface area of 60 watts/square centimeter;
It has the characteristics of simple structure, high mechanical strength, high thermal efficiency, safety and reliability, easy installation, long service life, no pollution, and low price. It also saves electricity, is safe to use, can be bent into various shapes, is light, and is easy to disassemble.
Product Description
1.Application: warmer for toilet
2.Characteristics
1) self-regulation PTC elements, automatic temperature control
2) Less power aging rate
3) Size, power and voltage can be designed as client request . Power range is from 0.1-.0.5kw and voltage range is from 110 to 265 VAC
4) Tiny structure with micro thermostat and temperature fuse. Under the condition of no air flow, thermostat will act.
Product Description
1,Application: Warmer, disinfection cabinet, bathroom heater
2,Characteristics
self-regulation PTC elements, automatic temperature control
Less power aging rate
Power and voltage can be designed as client request . Power range is from 0.5-5kw and voltage range is from 110 to 265 VAC
Various fixing holder and wire connection for easy assembly and usage
Product Description
1.Application: Defrosting or air heating for electric vehicles.
2.Characteristics:
Self-regulation PTC element heater is safe and will not be damaged without air flow
Thermostat will cut off the power if the unusual condition leads to overheating
Multiple INSULATIONS, electric strength is up to 2500VDC
Excellent low temperature start performance, it can quickly start heating under -40C
Voltage can be designed by client request
Product Description
1.Application: warmer for automotive
2.Characteristic:
Energy saving self-regulation
Temperature self-control
Low voltage for 12~24VDC
Wattage can be chose between 150~720W as a requirement
Materials:
Inner tank materials: sus304-2b
Inner tank thickness: 0.5mm
Outer tank: the steel coated with zinc
Outer tank thickness: 0.37mm
Insulation: polyurethane imported from south korea
Insulation thickness: 50-65mm
Frame materials: steel coated with the zinc
Frame thickness: 1.5mm
Advantages: low cost hot water and good heat efficiency.
Product Description
1.Application: Tubular PTC heater for towel drier, electric water heater, ventilator
2.Characteristics
1) self-regulation PTC elements. Heater will not be damaged or get fire even if under the condition without water flow.
2) Less power aging rate. Energy-saving, power will be adjusted automatically by water temperature.
3) Voltage can be designed as client request from 12-265VAC.
4) Housing material can be made as client request like aluminum, stainless steel, cooper, or titanium to suit for different application.
5) Diameter can be ranged from 5-25 mm. Length can be ranged from 10-1200mm. Special requirements can be customized.
Tech data:
1. Inner water tank:stainless steel, sus304-2b, ss316l, enamel;thickness, 1.2-2.5mm.
2. Outer water tank:color steel or stainless steel;thickness, 0.40mm.
3. Insulation layer: polyurethane foam;thickness, 30-60mm.
4. Frame:galvanized steel; aluminum alloy; stainless steel; angle, as your requirement.
5. Vacuum tubes: aln/ain-ss/cu layer; 47-1500 or 58-1800 with heat pipe.
6. Heating element, mg rod, reflector and controller can be provided.
7. Working pressure :0.6mpa , testing pressure :1.0mpa.
Characteristic:
1. Evacuated tube, aluminum fin and heat pipe arc closely integrated, realizing faster heat transfer and lower loss.
2. There is no water in tube, no filthy, anti-freeze, unlimited time of putting water and pressure operation, even there is tube broken, and the whole system still can work.
3. The system is same as tap water which would make the bathing very comfortable.
4. With the t/p valve, air vent valve makes the system work very stable and safety.
5. Can be used all year round in the cold climate
This system is combined with solar collector, pressurized storage tank, work station, pipeline etc.
1. Solar collector can be the heat pipe solar collector, the u pipe solar collector, the balcony solar collector or the flat solar collector.
2. Inner tank for pressurized storage tank can be sus304-2b, ss316l or enamel tank.
3. Solar working station.
4. Working pressure :0.6mpa , testing pressure :1.0mpa
Characteristic:
1. No disorder water tank on your roof: split solar water heating systems is using a high efficiency solar collector on your roof and a high pressurized storage tank in the house. Integrated in to the roof of the building perfectly.
2. Perfect solar collector for domestic hot water heating system can be combined with existing energy source, such as your gas water heater, electric water heater, boiler, etc.
3. There is an auxiliary heating device--electric heater booster in the tank, so providing hot water in case of cloudy or rainy days, you will no need to worry about it.
4. Completely automatic
Tech data:
1. Inner water tank:stainless steel, sus304-2b, ss316l; thickness, 0.31-0.51mm.
2. Outer water tank:color steel or stainless steel;thickness, 0.40mm.
3. Insulation layer:polyurethane foam;thickness, 30-60mm.
4. Frame:galvanized steel; aluminum alloy; stainless steel; angle, as your requirement.
5. Vacuum tubes:aln/ain-ss/cu layer;47-1500 or 58-1800.
6. Tank capacity:70-400l.
7. Assistant tank heating element, mg rod, reflector and controller can be provided.
Characteristic:
1. Operated completely automatic if connect with intelligent controller.
2. Installed both on flat and inclined roof, and can be used with a electric booster (heating element) as to provide hot water without sunshine.
4. Suitable for camping area, holiday residences.
5. Stable and reliable performance, well wind resistance
