Specifications: Thickness: 1/4oz~2oz(9µm~70µm) Width: 260mm ~1290mm (for normal pcb)
Vlp ed copper foil Specifications: Thickness: 1/4oz~3oz(9µm~105µm) Max size: 1295mm×1295mm Performance: ClassificationUnit9µm12µm18µm35µm70µm105µm Cu content%=99.8 Area weigthG/m280±3107±3153±5283±7585±10875±15 Tensile strengthR.T.(23?)Kg/mm2=28 H.T.(180?)=15=18=20 ElongationR.T.(23?)%=5.0=6.0=10 H.T.(180?)=6.0=8.0 RoughnessShiny(ra)µm=0.43 Matte(rz)=3.5 Peel strengthR.T.(23?)Kg/cm=0.77=0.8=0.9=1.0=1.5=2.0 Degraded rate of hcl(18%-1hr/25?)%=7.0 Change of color(e-1.0hr/200?)%Good Solder floating 290?Sec.=20 Appearance(spot and copper powder)----None PinholeEaZero Size toleranceWidthMm0~2mm LengthMm---- CoreMm/inchInside diameter 79mm/3 inch
High-precision rolled copper foil Rolled copper foil has extraordinary strength, bendability, ductility and lustrous surface, plus its excellent mechanical capacity, makes it irreplaceable as a raw material. Base material: c11000 copper, cu > 99.96% Thickness range: 0.009mm-0.15mm Width range: 200mm-640mm Temper: hard, soft Application: ccl, electronics shielding and heat radiation, wide copper tape etc. NameGbAlloy no.Size (mm) (iso)(asmt)(jis)(bis)(din) Copper foilT2Cu-etpC11000C1100C101R-cu57Thickness: 0.009-0.15 /max width: 640 ItemUnitThickness 9um12um18um35um70um90um PurityCu%=99.97 Surface roughnessRaUm=0.17 Tensile strengthRm(hard)N/mm2420-440450-470460-480430-450410-430 Rm(soft)N/mm2160-180180-220200-230210-240220-250 ElongationA50(hard)%0.8-1.20.8-1.31.0-1.51.2-1.81.5-2.0 A50(soft)%=5.0=6.0=8.0=10.0=15.0=20.0 Oxidation resistance200?Min60 PinholeEaNone WidthMm100-660 Width accuracyMm0~ +2 Core/3 in, 6 in, 80mm Note: we can provide products with other properties according to customers` requirements. Physical properties Density: 8.9g/cm3 Electrical conductivity (20°c): min 90%iacs for annealed to temper Min 80%iacs for rolled to temper Thermal conductivity (20°c): 390w/(m°c) Elastic modulus: 118000n/m Softening temperature: =380°c Sizes and tolerances (mm) ThicknessThickness tolerancesWidthWidth tolerances 0.012~0.04± 0.001100~600± 0.1 > 0.04~0.10± 0.002 Specifications available (mm) ThicknessWidthTemper 0.012~0.04100~600O, h, > 0.04~0.10100~600O, h
Ed copper foils for fpc Dimension range: Thickness: 9~35µm Performances: The product surface is black or red, has lower surface roughness. Applications: Flexible copper clad laminate (fccl), fine circuit fpc, led coated crystal thin film. Features: High density, high bending resistance and good etching performance.
Ed copper foils for fpc Dimension range: Thickness: 9~35µm Performances: The product surface is black or red, has lower surface roughness. Applications: Flexible copper clad laminate (fccl), fine circuit fpc, led coated crystal thin film. Features: High density, high bending resistance and good etching performance. S-hte ed copper foils for pcb Specifications: Thickness: 1/4oz~2oz(9µm~70µm) Width: 260mm ~1290mm (for normal pcb) Vlp ed copper foil Specifications: Thickness: 1/4oz~3oz(9µm~105µm) Max size: 1295mm×1295mm
Ethanol alcohol distillation column 1. It is standard 95-96% alcohol equipment. Also it can distill pure water. 2.The distillation system has  three columns  and  continuous  distillation  process.The process is the  same as industrial(large scale) alcohol equipment.  Mash distillation  column distills  fermented  mash or light alcohol  to 50% alcohol ethanol . It has red copper bubble cap trays, standard design. It auto continuously feeds material liquid, auto continuously produces 50% alcohol ethanol and auto continuously discharges waste,  ethanol discharge in waste 0.05%, better than international standard requirements. The first rectification distillation  column  increases  alcohol degree  to 70-75% ,  separates  fusel oil and high boiling point  Impurities.  It auto discharges waste water,  ethanol discharge in waste 0.05%, better than international standard requirements. The second rectification distillation  column  increases alcohol degree to 95%,  separates low boiling point  impurities  like acetaldehyde and methanol . 3.  The rectification system uses  industrial(large scale) standard process, but the whole set alcohol equipments are installed in one frame, like integration  module, even  you can run it by a button.
Distillation column For Ethanol Alcohol Plant 1. It is standard 95-96% alcohol equipment. Also it can distill pure water. 2. The distillation system has three columns and continuous distillation process.The process is the same as industrial(large scale) alcohol equipment.     a. Mash distillation column distills fermented mash or light alcohol to 50% alcohol ethanol .  It has red copper bubble cap trays, standard design. It auto continuously feeds material liquid, auto continuously produces 50% alcohol ethanol and auto continuously discharges waste, ethanol discharge in waste ?¤0.05%, better than international standard requirements.     b. The first rectification distillation column increases alcohol degree to 70-75% , separates fusel oil and high boiling point Impurities. It auto discharges waste water, ethanol discharge in waste ?¤0.05%, better than international standard requirements.     c. The second rectification distillation column increases alcohol degree to 95%, separates low boiling point impurities like acetaldehyde and methanol . 3.  The rectification system uses  industrial(large scale) standard process, but the whole set alcohol equipments are installed in one frame, like integration module, even you can run it by a button.
CuCo1Ni1Be/CW103C Cobalt Nickel Beryllium Copper Chemical Composition: Be: 0.40-0.70% Co: 0.80-1.30% Ni: 0.80-1.30% Cu: Balance Note: Copper plus additions equal 99.5% minimum. Shapes : Round bars, Round wires, Round tube, Flat bars, Square bars, Rectangular bars, Hexagon bars, Plates, Sheets, Coils Custom shapes are available upon request. Available Sizes: Rod: Dia.5~16mm; Wire: Dia.0.1-5.0mm Tube: OD10~60mm, ThK 0.1~10mm Plate: thk min 0.5mm Custom Diameter & Sizes, Random Mill lengths Typical Physical Properties: Density (g/cm3): 8.83 Density before age hardening (g/cm3): 8.75 Elastic Modulus (kg/mm2 (103)): 14.10 Thermal Expansion Coefficient (20 °C to 200 °C m/m/°C): 17 x 10-6 Thermal Conductivity: 209 W/m � oK at 20 C Melting Range (°C): 1000-1070 Note: 1). the units are based upon Metric. 2). the typical physical properties apply to age hardened products. Related Standard : Rods/Bars/Tubes: ASTM B441, SAE J461,463; RWMA Class 3 Sheets: ASTM B534 Wires: ASTM B441 Plates: ASTM B534, SAE J461,463; RWMA Class 3 European Standards: CuCo1Ni1Be, CW103C to EN Other material are also available C17200/CuBe2/CW101C/DIN 2.1247 C17300/CuBe2Pb/CW102C/DIN 2.1248 C17500/CuCo2Be/CW104C/DIN 2.1285 C17510/CuNi2Be/CW110C/DIN 2.0850 CuCo1Ni1Be/CW103C
C18150 Chromium Zirconium Copper bar as per RWMA Class 2
Ed copper foils for fpc Dimension range: Thickness: 9~35µm Performances: The product surface is black or red, has lower surface roughness. Applications: Flexible copper clad laminate (fccl), fine circuit fpc, led coated crystal thin film. Features: High density, high bending resistance and good etching performance. S-hte ed copper foils for pcb Specifications: Thickness: 1/4oz~2oz(9µm~70µm) Width: 260mm ~1290mm (for normal pcb)
S-hte ed copper foils for pcb Specifications: Thickness: 1/4oz~2oz(9µm~70µm) Width: 260mm ~1290mm (for normal pcb) One-side shiny
High-precision rolled copper foil Rolled copper foil has extraordinary strength, bendability, ductility and lustrous surface, plus its excellent mechanical capacity, makes it irreplaceable as a raw material. Base material: c11000 copper, cu > 99.96% Thickness range: 0.009mm-0.15mm Width range: 200mm-640mm Temper: hard, soft Application: ccl, electronics shielding and heat radiation, wide copper tape etc. Note: we can provide products with other properties according to customers` requirements. Physical properties Density: 8.9g/cm3 Electrical conductivity (20°c): min 90%iacs for annealed to temper Min 80%iacs for rolled to temper Thermal conductivity (20°c): 390w/(m°c) Elastic modulus: 118000n/m Softening temperature: =380°c
C17200/CuBe2/CW101C/DIN 2.1247 Beryllium Copper C17200 is manufactured to provide a combination of high strength and hardness properties coupled with superior thermal properties. This range of properties makes C17200 the premier material for copper alloy molds and a wide range of other applications from oil and gas to aerospace. Chemical Composition: Be: 1.80-2.0% Co+Ni: 0.20% Min. Co+Ni+Fe: 0.60% Max. Cu: Balance Note:Â Copper plus additions equal 99.5% minimum. Material description: High strength, good fatigue strength, good conductivity, non-magnetic, wear resistance Applications - Nozzles and needles for hot runner systems - Inserts in plastic blow moulding and plastic injection moulding - Needles and nozzles for hot canal systems - Packing bearings rings in extreme high pressure hydraulics(e.g. jet cutting) - Stud holders for stud welding equipment - High strength, non-magnetic, non-sparking parts, sleeves,bushings, bearings for offshore, onshore, airplanes, precision instruments and medical applications moulding Shapes : Round bars, Round wires, Round tube, Flat bars, Square bars, Rectangular bars, Hexagon bars, Plates, Sheets, Coils Custom shapes are available upon request. Available Sizes: Rod: Dia.5~200mm; Wire: Dia.0.1-5.0mm Tube: OD10~60mm, ThK 0.1~10mm Plate: thk min 0.5mm Custom Diameter & Sizes, Random Mill lengths Related Standard : Rods/Bars/:Â ASTM B196; SAE J461,463; AMS 4533,4534,4535; AMS4650,4651; RWMA Class 4, GOST 15835 Tubes: ASTM B251,643 Strips:Â ASTM B194, AMS4530,4532; SAE J461,463, GOST 1789 Â Sheets:Â ASTM B194 Wires:Â ASTM B197, AMS4725, SAE J461,463, JIS 3270, GOST 15834 Plates:Â ASTM B194, SAE J461,463; AMS4530,4533,4534,AMS4650,4651; RWMA Class 4. European Standards:Â CuBe2, DIN 2.1247, CW101C to EN, BrB2 Other material are also available C17300/CuBe2Pb/CW102C/DIN 2.1248 C17500/CuCo2Be/CW104C/DIN 2.1285 C17510/CuNi2Be/CW110C/DIN 2.0850 CuCo1Ni1Be/CW103C
Name: high purtity copper sulpfate Product stantard: net content 25kg/bag or customized ton pack Implementation standard:Q/YSJC-CP49-2014 Product benefits: high quanlity raw meterial(high quality cathode copper), state-of-the-art, high purtiy(99.2%), low impurity content. Main uses: suitable for high-end plastic plating, FPC/PCB, Electronic component, electrice forming, Electroless copper plating, surface finish etc.
The material combines the high mechanical resistance of steel with the conductivity and resistance to corrosion of copper. Patent certified, Songfa Alloy Material Co., Ltd. has been an expert in the field for more than 15 years, and we have built solid cooperation relationship with customers both at home and abroad. We have been providing this material to Yinlun Machinery Co., Ltd, the China largest oil cooler manufacturer, for their oil coolers as basis and get quite positive feedback. Hope to find a way to cooperate with you. Copper clad steel strip is widely used in the production of door, auto oil cooler, bullet casing and electrical accessories. Free samples can be sent for your evaluation. Contact: sales1 at china-songfa.com Packaging: Wood Pallet, or as your request Size: 0.4mm*600mm, also can be customized
Specifications of copper foil: Grade, c1020, c1100, c1220 , custom Thickness, 0.018mm -1.2mm Width, max. 400 mm Coil weight, 6.5kg / mm Temper, o, 1/4h, 1/2h, h, hv100 Parameter of copper foil: Chinese grade, abroad similar brand International, usa, japan, uk, germany (iso), (astm), (jis), (bs), (din) T2, cu-etp, c11000, c1100, c101, r-cu57 Tp2, cu-dhp, c10200, c1020, c106, si-cu Applications of copper foil:applications for copper foil 1) electric and electric springs, switches 2) communication cable 3) cable armoring 4) mobile phone main board 5) ion battery production lamination with pi film 6) lead frames 7) connectors and oscillation reeds 8) pcb field 9) pcb collector (electrode backing) materials 10)garments accessories(eyelet etc)
C27200, c27000 etc. 4) chemical composition:cu >99.90% p:0.015%-0.040% 5) temper: o, 1/4h, 1/2h, h O : hv100 6) electric 20℃conductivity:c1100 >97% ;c12200 >80% Applications of copper tube (copper pipe): 1) natural gas, liquefied petroleum (lp)gas 2) hvac, snow melting, drain, waste, vent piping 3) re-drawing usage 4) high conductivity use 5) cable lugs and termainals 6) electric connectors 7)lighting industry 8) air conditioner and refrigerator 9) water tube service and distribution 10) fire protection, solar, fuel/fuel oil
Item Test result Copper 99.9% 0.003% As customet requirement.
Shipping documents: One set of the following documents consisting of three (3) originals and three (3) non-negotiable copies will be furnished by the seller: - Full set of 3 (three) originals and 3 (three) copies of clean on board, bill of loading blank endorsed, notifying the party. íºc Commercial invoices 3 (three) originals and 3 (three) copies with description of goods, unit price, total amount and weight of goods. íºc Certificate of change of ownership, íºc Certificate of origin, - Export permit from the country of origin. Dimension: 914mm x 914mm x 12mm (lme standards) Weight of each sheet: 125kgs (+/- 1%) Net weight of each pallet: 2mts (+/- 1%) Min. Weight in each container: 20mts approx. Gross weight of each container: 22.20mts approx. Packing: palletized banded by aluminium bands
Copper plate
