YL-SNF-C(Na2SO4 less than 18%) Sodium Naphthalene Sulfonate Formaldehyde This product, named -naphthalene sulfonate formaldehyde condensate, is non-air entraining superplasticizer. It has good dispersing performance to the cement particles. Compared with traditional plasticizer, it has higher water reducing rate, and good for preparing mass concrete, fresh concrete required for early strength and high strength, and precast concrete and parts. It also has good adaptability to commonly used cement, and widely used in roads, bridges, dams, power engineering, civil construction, steam and natural curing precast parts and other projects. Advantage: * Higher water reducing rate. By the recommended dosage, the water reducingrate can reach 15% -20%. * Improve the workability of concrete, such as compression, long-term strength, flowability, etc., and enhance the reinforcement of steel and concrete. * Reduce costs. In the case of maintaining the same workability and strength, cement amountcan be reduced. * Wide adaptability, cost-effective. Good adaptability to all kinds of cement, such as Portland cement, slag cement, volcanic ash cement, etc. * Be mother material to formulate other admixtures.(like early strength, set retarder, pumping agent, antifreezing agent).
YL-PL-WR Polycarboxylate Superplasticizer (Water reducing type, 40-50% solid content) * High water reduction, low dosage. The water reducing rate can reach 20%-40% with recommended dosage. * Early and high strength. The early strengthand 28 day strength have been obviously improved. * Low slump loss: complywith the pumping agent standard, slump loss would besignificantly reduced. * High durability: This product can effectively reduce the W/C ratio, improve durability. * It can be used as a mother liquor to produce other functional admixture, such as early strengthtype, retarder, pumpingconcrete admixture, antifreezer, etc.; * Environmentalfriendly products: the production does not pollute the environment; * Non-corrosionon steelbar.
Description YL-SNF-A is a high range water reducer, high concentration naphthalene-based superplasticizer, also named Naphthalene Sulfonate Formaldehyde Condensate (NSF), SNF, PNS and FDN etc. YL-SNF-A (Na2SO4 less 5%) contains no chloride, non-corrosive to steel bars, non-poisonous, odorless, and non-flammable. Thus, it meets the requirements of chemical admixture specifications for concrete, complying with ASTM C 494, Type F. ASTM C 1017, GB8076-2008 and GB50119-2003 etc. Uses 1.YL-SNF-A possesses the features of no retarding, no air-introducing, superplastic high water-reducing and strength enhancing. It has no chloride, low alkali content, low sulphonate, and high purity. It can be widely used in different concretes with less dosage and easy to use. 2.YL-SNF-A can be applied to make flowing, strong or steam-curing concrete. The minimum working temperature can be as low as zero centigrade degree. In steam curing, concrete with superplasticizer has to be strong enough before heating. The steam curing specification has to be pre-tested. It is particularly used as base material for compound admixtures. 3.It can prevent from the alkali-aggregate reaction because of the biggish alkali reactivity of aggregate or the alkali-aggregate reaction in the moist environment. Advantage 1.High water-reducing rate: YL-SNF-A can reduce water 20-30%. It has features of superplasticizer, effectively increases concrete fluidity and reduces water penetration and segregation and improves the encapsulation force of the concrete with reinforcing steel bar. 2.Strengthening: Given the same amount of cement and slump requirement, this product with the dosage 0.5-1.2% can increase the concrete early strength and reinforced effect by 50-100%, 40-70%, 25-60% and 20-60% on day 1, 3, 7, and 28 respectively. 3.High applicability: It can be used with different variety of cement. It is compatible with other admixtures. 4.Low sodium Sulfate content: The aqueous solution has no crystals in winter, which can avoid pipeline congestions when JK-01 NP applied. It is suitable for automatic working. 5.Effective durability: It can modify the structure of concrete and increase the property of anti-seepage, anti-freezing, and carbonization. 6.Easy to use: It can be added directly or used after dissolved in water. It can be used for different working condition and concrete mixer. Specifications Items Criteria Actual results(C¡¨¢0.75%) Appearance -- Brown powder Solid Content % 92 min 92.65 Moisture % 8.0 max 7.35 Fineness (0.315mm remains) % 15.0 max 9.2 PH value 7 - 9 8.5 Sodium Sulfate Content % 5.0 max 3.8 Chloride Content % 1.0 max 0.11 Surface Tension 68-72 Mn/m 71 Cement Flowing Rate 240mm 265mm Water Reducing Rate 20% min 22.3% Steel-bar Corrosion None None Dosage 0.5-1.2% by weight of cement. Exact dosage rates depend on the type of effect sought, quality of cement and aggregates, water/cement ratio and ambient temperature. Therefore, in many cases it is advisable to carry out trial mixes. YL-SNF-A can be added directly or added in after dissolved in water. It can be added during mixing and after-mixing (better). The after-mixing approach can achieve better result. Test Data Sheet Items Dosage rate (Cx%) Water (g) Slump (mm) Water reducing rate (%) Compressive strength (MPa) /Compressive strength rate (%) 1 day 3 days 7 days 28 days Reference concrete 0 2555 82 0 4.34/100 13.70/100 20.19/100 24.06/100 YL-SNF-A 0.75 1986 89 22.3 7.63/173.3 23.85/173.4 30.84/150.7 33.72/137.2 Package, Storage & Shelf Life For powder: Woven plastic bag with film liner. Net weight: 25kg +/- 0.2 kg. It should be stored in a dedicated warehouse that is well-ventilated and dry and keep away from moisture. Shelf Life: Minimum 12 months. After the expiration date, it can be used if testing results is qualified. For powder: Woven plastic bag with film liner. Net weight: 25kg +/- 0.2 kg.
Description YL-08NP is a water reducing, highly effective superplasticizer with a set retarding effect for concrete in hot temperature which delays concrete setting time. It has also high range water reducing for promoting high early and ultimate strengths of concrete. YL-08NP is naphthalene-based superplasticizer compounded by some of high-performance retarder, stabilizer and reinforcing admixtures etc. It complies with ASTM C 494 Type G, GB8076-2008 and GB50119-2003. Uses YL-08NP is ideal concrete admixtures for preparing high-performance and high-strength concrete, mass concrete and long-distance transport concrete etc. t is suitable for working condition under temperature 5-40 ¡æ. Not suitable for being solely applied in the steam curing concrete. Test before applied in anhydrite, dross or similar industrial waste cement. Advantage Has a high efficiency water-reducing, retarding in the initial setting and early strength in final setting, late-enhanced, less slump loss etc. which is extremely beneficial to the transport and to pouring of concrete. Increases initial workability. High ultimate strengths. The concrete of compressive strength, flexural, tensile, impermeability and durability are significantly improved and enhanced. The concrete setting time prolong 1-3h, it can also be adjusted according to the user's demand. It has not affected the strength growth of concrete at different time. Dosage 0.5-1.2% by weight of cement. Exact dosage rates are dependent on the type of effect sought, quality of cement and aggregates, water/cement ratio and ambient temperature. Therefore, in many cases it is advisable to carry out trial mixes.Using during mixing and after-mixing method and properly prolong stirring time to assure even. Specifications Item Norm Item Norm Appearance Lark powder Fluidity of cement 230mm Fineness (0.315mm remains) % ¡¨¹12% Chlorine content Non PH value 7-9 Moisture % 8.0 max Technical Data Sheet Items Criteria Test Results (C¢1%) Water Reducing Rate (%) ¡Y14 24.4 Ratio of Bleeding Rate (%) ¡¨¹100 32.8 Air Content (%) +90 +200 Compressive Strength Ratio (%) 3 days -- -- 7 days Y125 135 28 days Y120 132 Shrinkage (%) 28 days ¹135 109 Alkali Content (%) ----- 2.35 Alkali Content per m3 (kg) ¹1.0 0.1 Chloride Ion Content ----- 0.09 Chloride Ion Content per m3(kg) Prestress Concrete
Description YL-NNO is light brown yellow powder, an anion surface active agent. Easily soluble in water, acid, alkali and hard water. It has good dispersing property and affinity with protein and polyamide. Usage Mainly used for vat dye dyeing, reactive dye dyeing and acid dye dyeing. It can work as dispersant for acid staining pad and pigment pad dyeing; auxiliary for reducing dye powder and slurry. It can also be used in leveling agent in dyeing industry Advantages 1). As dispersant NNO;in disperse dye, vat dye, reactive dye, acid dye and leather dye. It has good grinding effect, hydrotropy and dispersibility. 2). As dispersant in textile printing and dyeing industry: pigment pad dyeing of disperse dye;vat acid dyeing of disperse dye; dye for silk and feather mixture; soluble vat dye dyeing; Etc. also can be used as dispersant for disperse dye and lake making; filler for commercial dye etc. 3). As dispersant in wettable pesticide and herbicide, the dispersibility and solubility of pesticide can be improved. 4). As dispersant in electroplating industry, so that the cladding film can be equal and have a better brightness. 5). As auxiliary tanning agent in leather industry, used together with tanning agent (ratio 1:10) to avoid tanning agent stickwith leather. Can also help to disperse dye to get a better appearance in color. 6). As dispersant for paper industry. After adding NNO into wood pulp to avoid the stain from the condensation ofasphaltum, resin and other material 0.2%-0.5% of the wood pulp weight as dosage is preferable. Can work as precipitator for animal size, 20%-30% of the size weight as dosage is preferable. 7). As dispersant in rubber industry. Can disperse sulfur, accelerant, anti-aging agent and some filler(like zinc oxide, barium sulphate, calcium carbonate etc). 2%-4% of the dry powdeweight as dosage is preferable. Can make NNO into 10% solution, then grind with others in ball grinder. 8). Also can be used in coating, painting, pigment, carbon black etc. 9). Can be used in color lake industry. Specification Item Specification Dispersing rate % 95%min Sodium sulfate content % 5 max pH value 7-9 Insolubles % 0.05% max Content of calcium and magnesium ion, ppm 2000 Package, Storage & Shelf Life For powder: Woven plastic bag with film liner. Net weight: 25kg +/- 0.2 kg. It should be stored in a dedicated warehouse that is well-ventilated and dry and keep away from moisture. Shelf Life: Minimum 12 months. After the expiration date, it can be used if testing results is qualified. For powder: Woven plastic bag with film liner. Net weight: 25kg +/- 0.2 kg
Description YL-09 NP is naphthalene-based non-chloride set-accelerating water-reducing admixture, it significantly accelerates setting time, and reduces the quantity of mixing water necessary to produce concrete of a given consistency, while providing greater economy for a given strength. It increases strengths and significantly improves permeability, workability and finishing characteristics. It complies with GB 8076-2008, GB50119-2003 and ASTM C494, Type E. Uses This product is designed for the constructions requiring earlier strength for normal concrete, steel-reinforced concrete, and pre-stress concrete under normal temperature, low temperature (-5 to 30 degree C). Widely used in pre-cast & deposit concrete, armored concrete, pre-stressed reinforced concrete and fly-ash-cement concrete. Compatible with Portland cement, normal Portland cement, Portland slag cement, fly-ash cement and Portland pozzolanic cement etc. Suitable for self-cured concrete and its formulations. It has remarkable effects of water reduction and enhancement, especially at the early stage. The modulus and site utilization can be improved. Advantages Accelerating setting time across a wide range of temperatures. Increasing early and ultimate compressive and flexural strengths. Water reducing 10-15% with low dosage of 1.5-2.5% After application, all physical properties of concrete can be improved to a certain extent. 10%-15% of cement will be reserved when it is applied as a condition of blending in which collapsibility and strength are fixed forehand. Specifications Item Norm Item Norm Appearance Gray powder PH value 7-9 Fineness (0.315mm remains) % ¹12% Chlorine content Non Moisture ¡¨¹10% Fluidity of cement 160mm Technical Data Sheet Item Actual results Criteria Water-reducing rate (%) Y12 Y8 Bleeding rate ratio (%) 90 Air content (%) ¡¨¹2.5 4.0 Setting time difference (min) Initial setting -30+30 -90+90 Final setting -30¡«+30 -90+90 Compressive strength ratio (%)Y 1 day 145 135 3 days 140 130 7 days 120 110 28 days 110 100 Shrinkage ratio (%) 28 days ¡¨¹120 135 Corrosion reinforcing steel bar Non Package, Storage & Shelf Life For powder: Woven plastic bag with film liner. Net weight: 25kg +/- 0.2 kg. It should be stored in a dedicated warehouse that is well-ventilated and dry and keep away from moisture. Shelf Life: Minimum 12 months. After the expiration date, it can be used if testing results is qualified. For powder: Woven plastic bag with film liner. Net weight: 25kg +/- 0.2 kg.
Description YL-15 is naphthalene-based non-corrosive, non-chlorine compound antifreeze admixture which compounded with water-reducing, early-strength, reducing the freezing point, preventing freezing damage etc. ingredients, powder, it has early-strength, water-reducing, air-entraining, anticorrosion etc. functions. It is mixed to the concrete according to the request, can obviously improve the configuration of the capillary pores and reduce free-water and the freezing point of the concrete effectively. And it can accelerate cement hydration and concrete hardening under the low temperature condition, enhance the early strength greatly and make the strong more and more by time, is ideal admixture for construction in winter. Uses YL-15 is suitable for the winter construction (in ambient temperatures ranging from -5 degree to -20 degree) of common concrete, pumping concrete, large volume concrete and ready mixed concrete. Advantage YL-15 is a new generation of high efficient anti-freezing admixture. Small dosage, completely water soluble, low alkali, apparent reducing effect on the alkali-aggregate reaction. It can improve the workability, pumping properties and early strength of the concrete. YL-15 is suitable for concrete and precast below C50 but also the concrete above C50 with a addition of our high range water reducing admixture. Specifications Item Norm Item Norm Appearance Lark powder Fluidity of cement 120-160mm Moisture ¹10% Chlorine content Non PH value 7-9 Alkali content % 2.2 Technical Data Sheet Item JK-15 C10 JK-15 C15 JK-15 C20 Dosage 2.0% 3.0% 4.0% Lowest Daily Temperature -5degree -10 degree -15 degree Setting Time Difference (min) Initial -+120 Final Compressive Strength (Mpa) 1 day 8 2 1 3 days 25 20 10 7 days 40 30 15 28 days 60 50 40 Shrinkage (%) 28 days 20 Steel-bar Corrosion None Cautious 1.After the pouring construction covers the surface using the plastic sheeting and the grass curtain, do not let it to freeze immediately or blow the winds excessively caused the crack. Entering the mold temperature control above 5 degree. 2.Required heating curing at the early strength fast-enhancement. After the concrete formed, if the surface iced up, this phenomenon does not cause any the freezing damage. The intensity will remain enhancing rapidly, when the ambient temperature increasing. Package, Storage & Shelf Life For powder: Woven plastic bag with film liner. Net weight: 25kg +/- 0.2 kg. It should be stored in a dedicated warehouse that is well-ventilated and dry and keep away from moisture. Shelf Life: Minimum 12 months. After the expiration date, it can be used if testing results is qualified. For powder: Woven plastic bag with film liner. Net weight: 25kg +/- 0.2 kg.
Concrete admixture.
USD650/T FOB shanghai.This is Heaven Zhu from Chemix Specialty Chemical Co.,ltd(C.S.C), in China. We are promoting 98% Calcium Formate on construction grade.
clinker, tape, felting needle, regulator, PVC bag.Imporing & exporting agent, buyer agent, seller agent
Polyether polyol, polyurea coating, grouting material.Transportation and shipping
Multiwall Kraft paper bag with valve for packing cement, dry mortar, chemical, tile adhesive, grout and other building materials.
Machinery and equipment and parts, chemical products and raw materials, cultural and educational supplies, daily necessities like washing powder , building materials, electronic products, clothing, cosmetics, feed, household appliances.
Methyl silica gel, methyltrichlorosilane(m1), dimethyldichlorosilane(m2), chlorotrimethylsilane(m3),d3,d4,d5,hydroxy terminated silicone fluid(oh),polydimethyl siloxanes pdms, methyl hydrogen silicone fluid, potassium methyl siliconate.
electric forklifts , construction equipment road construction equipment, metallurgy equipment, mining industry equipment, chemicals, concrete batching plants, self loading concrete mixers, concrete pumps, loaders, excavators, bulldozers;.
Silica gel.
Activated alumina, silica gel.Manufacturer
Oh polymer, pdms (0.65cst to 1, 000, 000cst), silica, silane, decamethylcyclopentasiloxane (d5).
Chlorinated polyvinyl chloride, chlorinated rubber, cpvc.Products and technical support
Polyacrylamide, wastewater treatment chemicals, flocculant, EOR chemical, oil displacement agent.
