Turkey Thermal Coal Imports Soared by 52.92% MoM in June, 2020 Turkey latest foreign trade statistics show that in June, Turkey thermal coal imports increased slightly from the same period last year, an increase of more than 50% from May, the second consecutive month of growth. In June, Turkey imported a total of 2.7191 million tons of thermal coal (bituminous coal), a slight increase of 0.15% from 2.715 million tons in the same period of the previous year, and a 52.92% increase from the 1,7782 million tons in May. In June, Turkey imported the most thermal coal from Russia, which was 1.643 million tons, a year-on-year increase of 77.92% and 182.5% month on month respectively. It imported 997,200 tons of thermal coal from Colombia, a decrease of 40.12% and 16.5% from the previous year and month respectively. In the same month, Turkey thermal coal imports amounted to160 million dollars, a year-on-year decrease of 18.9% and a month-on-month increase of 54.9%. The average import price is estimated to be USD 58.85 per ton, a year-on-year decrease of 19.02% and a month-on-month increase of 1.3%.
SteelHome website publishes monthly report on China Steel Market, HRC, CRC, Plating/Coated Sheet, Stainless Steel, Iron Ore, Scrap, Coal, and Coke each month. If you are interested in SteelHome Monthly Report, please contact leo.ji@steelhome.cn or dial 86-21-50585733 Monthly Report on China Steel Market for April 2019 Abstract I Review on China steel market in April 2019 II Analysis on May 2019 Market 1. Crude steel production 2. Steel export 3. Market inventory 4. Raw Materials 5. Economic indicators 6. Ample capital supply in Q1 7. Conclusion Subscribe SteelHome website to read the whole article and find more China Iron/Steel market information you're interested in.
Shanxi Completed Coal Capacity Reduction during the 13th Five-Year Plan Shanxi province eliminated coal capacity of 40.99 million tons in 2020 and reduced accumulated coal capacity of 156.85 million tons during the 13th Five-Year Plan, according to data released by Shanxi Energy Bureau on January 10. Presently, coal capacity in Shanxi has been reduced to 1.35 billion tons from the previous 1.46 billion tons, and the number of coal mines in the province has been reduced to below 900 from the previous 1078. Subscribe SteelHome website to find more China Iron/Steel market information you're interested in.
Inner Mongoli s Ejin Horo Banner Sept Coal Review Production In September 2020, a total of 14.98mn t of raw coal was produced in Ejin Horo Banner in Inner Mongolia, falling 1.45mn t or 9% from preceding year. Shendong Coal produced 5.96mn t of raw coal, up 580,000t or 11% from 2019. Local coal mines produced 9.02mn t of raw coal, down 2.02mn tor 18% on the year. Sales In September, Ejin Horo Banner sold 14.74mn t of coal in total, falling 1.25mn t or 8%. Shendong Coal sold 5.96mn t, up 580,000 t or 11% from last year. Local coal mines sold 8.79mn t, down 1.83mn t or 17% from prior year. Price By the end of September, coal price in Ejin Horo Banner averaged 322 yuan/t, falling 16 yuan/t or 4.7% on the year. Price of lump coal was 368 yuan/t, down 5 yuan/t yet up 1.3% year on year; that of raw coal declined by 44 yuan/t or 14% to 273 yuan/t from last year; that of powdered coal increased by 13 yuan/t or 4% to 336 yuan/t from 2019. Subscribe SteelHome website to find more China Iron/Steel market information you're interested in.
China Second Largest Coal Company was Born in Shanxi A new coal giant was born in the great integration of Shanxi coal industries. Recently, Shanxi Provincial party committee decided to recombine Shanxi Jincheng Anthracite Coal Mining Group, Jinneng Group, Datong Coal Mine Group, Luâ??an Group, Huayang New Material Tech Group and China Taiyuan Coal Transaction Center after the reform into Jinneng Holding Group Co, Ltd. Jinneng Holding Group will become the second largest coal company in China. According to China National Coal Association, coal output of China Energy Group was 515mn t in 2019 and that of China Coal Group was 210mn t, ranking the first and second coal companies in China respectively. Subscribe SteelHome website to find more China Iron/Steel market information you're interested in.
NBS: China Jan-Aug Coal Ming and Washing Profit Down 30% According to National Bureau of Statistics, during January-August in 2020, China industrial enterprises above designated size achieved operating revenue of 64.2 trillion yuan, down 2.7% on the year. Mining industry reached operating revenue of 2.40725 trillion yuan, down 10.6% from preceding year. Operating revenue of China coal mining and washing industry posted 1.24144 trillion yuan, falling 11.2% from 2019; that of oil and gas sector was 430.05 billion yuan, down 21.2% year on year; that of ferrous metal mining and washing sector was 240 billion yuan, up 5% from prior year; that of non-ferrous metal mining and washing industry was 163.88 billion yuan, down 5.1% from last year; that of non-metal mining and washing realm was 209.74 billion yuan, dipping 2.6%; that of other mining field was 710 million yuan, slumping by 62.6% from 2019.
Customs: China Coal and Lignite Imports 25.286 Mlnt in June, 2020, down 6.69% YoY According to recent data released by the General Administration of Customs, China imported 25.286 million tons of coal in June 2020, a year-on-year decrease of 1.812 million tons or 6.69% and a month-on-month increase of 3.229 million tons or 14.64%. From January to June in 2020, the country imported 173.991 million tons of coal, an increase of 12.7% year-on-year. The cumulative annualized import volume is 348.938 million tons, which is higher than the level of 299.674 million tons last year. Subscribe SteelHome website to find more China Iron/Steel market information you're interested in.
BRIEFING (October 21, 2020): Coke and Coal Analysis on Market and Trading Tips Keys Points: From Monday to Tuesday, price of domestic metallurgical coke and coking coal went up amid stabilities; that of PCI and thermal coal was stable; purchase price of PCI by steel mills went up and down. Met Coke: Several steel mills which priced in the second half of month in Southwest China accepted 50-yuan hike put forward by coking plants. Representative coking plants in Shanxi, Hebei and Shandong started the fifth round of price hike and requested a 50-yuan hike since October 20, to which steel mills did not respond yet. Coking plants had no inventory and that at ports was also declining, making it difficult for steel mills to replenish stock. Blast furnace operating rate of steel mills was high, indicating strong demand. Meanwhile, strict implementation of de-capacity in Shanxi boosted price as well. By the end of October, 5.6mn t of capacity was confirmed to be exited with newly added capacity of 750,000 t. 6.2mn t of capacity in Linfen, Yuncheng and Lvliang was asked to be diminished, which needed to follow up. It is expected that metallurgical coke price will stay at a high level for a short term. Table 1: Price of Domestic Standard I Grade Metcoke in Spot Market (yuan per ton) Coking Coal: Price of low-sulfur coking coal in Linfen, Shanxi rose by 20 yuan, and was stable at 1350-1370 yuan/t (bank acceptance); that of high-moisture coal increased by 20 yuan to 1360 yuan/t, total growth in September reaching 100 yuan. Price of raw coal went up by 20 yuan to 820 yuan/t, up 70 yuan in total. Quotation of imported coal kept falling; that of I grade coking coal dropped by $19.5 to $129-130 per ton in October; that of standard I grade coking coal declined by $2.5 to $119.5-122 per ton.
Weekly Report of China Coal Market for May 8-15, 2020 From May 8-15, prices of coal of all kinds of types in domestic market diverged. There has been a noticeable rise in prices of thermal coal in spot market. But saleable resources were scanty and the market launched a new round of price hike. In terms of producing area, prices went ups and downs, and coal mines were required to suspend production in order to welcome the approaching two sessions (the National Peopleâ??s Congress and the Chinese Peopleâ??s Political Consultative Conference respectively). Price of coking coal in spot market plunged amid stability, and will maintain its weakness in the short term. Price of thermal coal in spot market fell amid stability and prices of a minority of PCI rose but tended to drop in the future. It is expected that in the following week ended by May 22, prices of thermal coal in ports and in producing areas will rise amid stability. Price of coking coal will be weak, and that of PCI in spot market will stop falling.
SteelHome Express: Shanxi Linfen Coking Coal Price Fell amid Stability during Labor Day Price of coking coal quoted from Linfen, Shanxi province fell amid stability during Labor Day holiday. Price of low sulfur coking coal plunged by 20-40 yuan and coking coal inventory at some coal mines was piled up. Specifically, price of coking coal from coal mine A dropped by 20 yuan to 1330-1350 yuan per ton (bank acceptance); that of coking coal from coal mine B fell by 30 yuan to 1350 yuan per ton (bank acceptance), and that of coking coal from coal mine C (Mt14) plunged by 40 yuan to 1310 yuan per ton (in cash). Subscribe SteelHome website to find more China Iron/Steel market information you're interested in.
Coal: Thermal, Rb1,rb2,rb4, Coking, Coltan, Anthracite.
Coal, coking, iron ore, cashmere.
Supply Ability: 5 sets per Month Keywords: Rock stone impact crusher machine Dimension(L*W*H):2479x 2970x 2050 mm Capacity(t/h): Max 600 t/h Warranty of core components: 1 year Key Selling Points: Low Maintenance Cost Motor Type: AC Motor Input Max Feeding Size: 500 mm Machinery Test Report: Provided Condition: New Usage: ore,quarry ,sand making Place of Origin: China Warranty: 1 Year Model type: PF Rotate speed: 590-1480r/Min Showroom Location: None Weight: 14000 KG Crushing type: Impact Brand Name: HuaXin Compressive Strength: 100-250 mpa Video outgoing-inspection: Provided Type: Impact Crusher Core Components: PLC,Gear,Other,Motor,Engine,B earing,Gearbox Marketing Type: Other Applicable Industries: Building Material, Shops,Manufacturing application for mining : limestone,rock,concrete,coal Product name: pv liner plate hammer impact crushing parts crusher Protection way: Reversible Crushing Application: mining stone crushing Packaging Detail: metal case ,metal rack fixed, for pv liner plate hammer impact
Coal coking products and refractory material, such as high temperature coal tar pitch, low temperature coal tar pitch, globular coal tar pitch, creosote oil, industrial crude naphthalene, coal tar, refractory materials, carburant, activated carbon.
Steam coal , iron ore , sunflower meal , lead ore, timber , paper cup, steam coal from Colombia.Service, sourcing, shipping, agent for made in china
Asphalt, sulfur, coal tar.Traders and shipping
T130X Superfine Grinding Mill is mainly used in processing powder of mineral materials of metallurgy, building materials, chemical industry, mining, etc. It can grind non-flammable and non-explosive materials with moisture less than 6% such as Feldspar, calcite, talc, barite, fluorite, rare earth, marble, ceramics, bauxite, manganese ore, iron ore, copper ore, phosphate rock, iron oxide red, slag, slag, activated carbon, dolomite, granite, iron oxide yellow, bean cake, chemical fertilizer, compound fertilizer, fly ash, bituminous coal, coke, lignite, Ling U.S. sand, gold, red mud, clay, Kaolin, coke, coal gangue, porcelain clay, kyanite, fluorspar, bentonite, muddy green rock, leaf wax rock, shale, purple rock, Diego rock, basalt, gypsum, graphite, insulation material, etc. Equipments: The complete set of T130X grinding mill consists of mainframe, reducer, classifier, maintenance platform, blower, collector, electric controller, etc.And some auxiliary equipments such as jaw crusher, bucket elevator, electromagnetic vibration feeder and hopper, etc. Working Principal: Large materials are crushed by jaw crusher into required size for mainframe, then the crushed materials are elevated to the hopper by bucket elevator£¬then to the grinding chamber for grinding by vibrating feeder evenly and continuously. The powder goes upwards with the airflow, after separating by the classifier, those which can meet the fineness requirement enters into the collector through pipes for separating and collecting, and discharged from the discharged valve as finished products. The airflow is sucked into blower through wind recycling pipe at the upper part of cyclone power collector. And the closed airflow circulation system with negative pressure ensures the environmental health of production line site. Technical Date: 1) Mainframe parameters Item Unit Specifications &Technical data Quantity of roller pcs 4 Diameter of roller x Height mm 410x210 Diameter of ring x Height mm 1300x210 Rotation speed rmp 103 Max. feeding size mm
Manganese ore, chrome ore, coal, nickel ore.Transportation and shipping, clearing agent
The use of YGM high pressure suspension grinding mill: YGM high pressure suspension grinding mill is mainly used to grind mineral materials in metallurgy, building materials, chemical, mining and so on. It is specializing in producing fine powder of non-inflammable, non-explosive with Mohs hardness under seven, humidity in 6%, such as Quartz, long stone, calcite, talc, barite, fluorite, rare earth, marble, ceramic, aluminum vanadium soil, manganese mine, iron ore, copper mine, phosphorus ore, iron oxide red, zirconium British sand, slag, water slag, cement clinker, activated carbon, dolomite, granite, pomegranate zishi, iron oxide yellow, bean cake, fertilizer, compound fertilizer, fly ash, bituminous coal, coking coal, lignite, dangling beauty sand, oxidation chromium green, gold, red mud, clay, kaolin, Coke, coal gangue, China clay, blue spar , Fluorspar, bentonite, maifan rock rhyolite, pyrophyllite, purple sandstone, shale, green muddy rocks, Diego rock, basaltic stone, plaster, graphite and silicon carbide etc. Technical features of YGM high pressure suspension grinding mill: 1. High-efficiency: the full use of the jet-flow and optimized impeller structure can greatly improve the crushing and grading efficiency, thus greatly improving the production. 2. High grading degree: with the frequency conversion and grading adjustment technology, the YGM high pressure suspension grinding mill have stable and complete grading system and the special sealing measure ,which can efficiently prevent the leaking of the fine particles .And the particle size can reach 5006000monyh and the thinnest can reach 12000monyh. 3. Low wearing: the crushing wearing parts and the impeller of the Raymond mill mainly adopts German technology. And with the optimized design of the inner cavity structure and anti-abrasion and allergy materials, the YGM high pressure suspension grinding mill has made the lowest wearing parts and the highest purity. YGM high pressure suspension grinding mill working principle: Firstly, raw material is crushed by jaw crusher to the size required, and then the crushed materials are elevated into a hopper from which the material is transported through the electro-magnetic vibrating feeder evenly and continuously into the grinding chamber for powder-processing. The rollers of Raymond mill oscillate outward to press the ring because of the centrifugal force and the shovel scoops up the materials, send to the middle between ring and roller to accomplish the grind. After this, the ground stuff is carried by the air from the blower into the separator for screening. The fine powers are blow into the cyclone collector and are poured out through the output-powder valve as the final products and the rough stuff after the screening will be recycled back into the grinding chamber for regrinding. The airflow system is closely sealed up and circulated under condition of negative and positive pressure.
Paraformaldehyde, castor oil, caprolactam, iron ore, timber, steel, sulphur, fertilizer, methanol fuel oil, bitumen, soda ash, caustic soda.Trading , financing , shipping
