Our company manufactures these profiles that are used in buses and other similar vehicles. These are used between the window and the main body, the door and the main body and in similar other applications. These components are manufactured in superior EPDM compounds with high ozone resistance capabilities. The cross-section design of these components are tested to grip the glass and the automotive body to provide perfect sealing required, avoid any rattling noise and also to provide optimal protection form dust, water and other irritants in the external en
Bar mat
Natural foam rubber Natural foam rubber sheet, made in China. Smellless and environmental, non-slip and non-troxic, they are of good quality and audited by sgs and rohs, 0.7mm to 20mm thick, while the width ranges from 90cm to 145cm.
Cup and desk mat One in a pp bag, 50 pieces in a carton Or by negotiation
Green epdm granule Acetone extract: 10% Ash content: 65% Polymer content: chlorination butyl and epdm Tensile strength: 30mpa Glue content: 15% Elongation at break: 150% Hardness: 55f¼70a Sizes: 0.5-1.5mm 0.5-2.5mm 1-3mm 2-4mm 3-5mm Colors: Red green blue yellow gray etc Country of origin: china Packaging: We packed 25 kg per piece in p.P bag. One 20ft container can fill with 20 tons of our products. Volume: Each pallet is 1.6cbm of lcl
Red epdm granule Acetone extract: 10% Ash content: 65% Polymer content: chlorination butyl and epdm Tensile strength: 30mpa Glue content: 15% Elongation at break: 150% Hardness: 55f¼70a Sizes: 0.5-1.5mm 0.5-2.5mm 1-3mm 2-4mm 3-5mm Colors: Red green blue yellow gray etc Country of origin: china Packaging: We packed 25 kg per piece in p.P bag. One 20ft container can fill with 20 tons of our products. Volume: Each pallet is 1.6cbm of lcl
Extruded rubber Extruded rubber is a major part of ebco's sale. We extrude sponge rubber, dense rubber, dense rubber with strands of filament and dense rubber with a wire carrier. This broad product range allows us to meet the most demanding requirements. We have compounds approved by ul which comply with the smoke and fire requirements for buses and transit vehicles. The majority of our products are custom but we do have a few profiles which are standard. We have various sizes of edge trim and edge trim with sponge bulbs for sealing purposes. Secondary operations are a common practice with extrusions. Profiles can be wound on reels or coiled on a cardboard disk. Parts may require the ends to have a unique cut or holes and slots cut along the length. To aid in application a pressure sensitive adhesive can be applied to meet the requirements you desire. Flocking is a process where synthetic fibers are glued to a profile to aid glass or a similar surface in sliding. Whatever your requirement we will be able to provide a product for you.
The products are made by edm, cnc, hcarver, and so on. We adapt the cad\cam\.Edc. Product line, success fufil digital producing.
In addition cure, silicone rubber is used for food mold/crafts 1. Good characteristics of easy-operation 2. Light viscosity and good flowability 3. Low shrinkage 4. Favorable tension 5. No deformation 6. Favorable hardness 7. High-temperature resistance, acid and alkali-resistance and ageing resistance 8. Food grade, non-toxic
We provide all kinds of liquid silicone rubber,molding,casting,electronic potting,pad printing,foam rubber,silicone for dildo,medical,label,leather,injection etc. Hong Ye Silicone have 23 years experience in silicone research and producing! A little higher price,much better quality! Do not focus only on price if you don't want lose your faithful customer!
Butadiene-acrylonitile latex (NBR Latex) TSC:44±2% PH:8.0-9.0 Machanical stability:
Other Names: acrylonitrile-butadiene latex Place of Origin: Shandong, China Type: Pharmaceutical Intermediates, Syntheses Material Intermediates Purity: 44%, 44%Min Brand Name: S Sailing Model Number: OEM, OEM Application: industrial and medical use Appearance: White milky liquid Product name: Nitrile Butadiene Rubber Latex Form: White milky liquid Packing: flexitank IBC drum Grade: Industrial Grade medical grade Origin: China PH value: 8.13 Surface tension: 28.4 Bound acrylonitrile,%: 27
Butadiene-Acrylonitrile Latex is a kind of high-polymer dispersion emulsion polymerized by free radical emulsion through advanced techniques. The third generation impregnated latex has oil resistance and solvent resistance and can be cross-linked with sulfur and metal oxides. It also has the characteristics of easy film formation and film removal. Its stability and products are better than natural latex. Application: Mainly used to produce lined gloves, unlined gloves, various industrial oil resistant gloves, especially suitable for making disposable medical examination gloves. The product is soft in texture, smooth and smooth, comfortable to wear, oil-resistant, solvent-resistant, acid- and alkali-resistant.
Adhesive/binder/resine/bonding agent Specially for racetrack Free of toxicity Without strong-smelling Usage: This product is applicable to the pavement of the ventilation plastic racetrack and the production of the safety ground mats ,the pavement of stadium and playground. And its weak adhesiveness before the cross-linking hardening will not stick to the tools and instruments and thus will facilitate the construction, reduce the usage of organic solvent and save costs. The superiority of this product lies in its resistance from hardening, high elasticity and rebound rate , making more comfortable to footing on it as well as maintaining sound motility.
A. Low viscosity B. Easy operation C. Long shelf life over 12 months D. High strength and low shrinkage E. Curing at room temperature 4-6 hours F. High duplication times and no deformation Part A base silicone: 20kg/drum, 25kg/drum or 200kg/drum Part B CA30 Curing Agent: 0.25kg/bottle, 1kg/bottle and 10kg/bottle
Styrene-butadiene rubber (SBR) is one of the biggest general synthetic rubber varieties, and is also one of the earliest industrialization production of rubber.It is the random copolymer of styrene and butadiene.Its physical mechanism performance, processing performance and performance close to the natural rubber, the use of some properties such as wear resistance, heat resistance, ageing resistance and curing rate is more excellent natural rubber, but with a variety of natural rubber and synthetic rubber .
Radial Tire Special Material YB-5 Introduction: 1. JERINA YB-5 is a special material for radial tires, and a high-efficiency toughening modified agent that synthesized from various auxiliaries. It has plasticization, lubrication, cross-linking, coupling and other functions. 2. JERINA YB-5 also has high-activity inorganic filler as carrier, and the high-activity inorganic filler will dilute the toughening modified agent to form a thin layer of active material on the surface, which is more easily to crosslink with rubber, and significantly improve the reinforcing performance. 3. JERINA�® YB-5 mainly applicable to Tire, conveyer belt, rubber hose etc. Technical Specification: Appearance: White powder (visual inspection) Heating loss (105degX2h), % max.: 0.5 (HG/T2567) Specific gravity, g/cm3: 2.2-2.7 (HG/T3185) pH Value: 8.0-11.0 (HG/T2567) Application: 1. Add 3-8 phr JERINA YB-5 for tire production. 2. YB-5 can be added directly to your original formulation, or you also can make some small adjustment. Optimized vulcanization rate complies with test data and results. 3. Above are suggestions that you can adjust for optimal performance. Packing and Storage: 1. It is packed in Kraft paper bags lined with plastic film, net weight is 25kg/bag. 2. It should be stored in a cool, dry warehouse. 3. The shelf life is 24 months.
MOQ:1000KGS Appoication:Vulcanized By DBPH,applicable to manufacture molding silicone rubber compound silicone rubber parts,sealing parts,rubber keypad etc., especially for colored rubber parts. Color: Translucent solid, Milky-white, no mechanical impurities.
Item: OTT-Y230 Mixing ratio: 9:1 Color: Red/White Hardness: 30;2 Viscosity (mPa.s): 10000;¨¤3000 Working Time (25;;): 10-40mins Curing Time (25;;): 1-6 h Tear-Strength (kN/m):;Y25 Tensile- Strength (Mpa):;Y5.5 Elogation (%):;Y500 Shrinkage(%):;0.1 1kg/tin;;5kg/tin;;20kg/drum;;25kg/drum;;200kg/drum
Item: OTT-J825 Mixing ratio:1:1/10:1 Color: Translucent Hardness: 25;¨¤2 Viscosity (mPa.s): 7000;¨¤2000 Working Time (25;;):20-40mins Curing Time (25;;):3-5h Tear-Strength (kN/m):;Y24 Tensile- Strength (Mpa):;Y6.3 Elogation (%):;Y500 Shrinkage(%):;0.1 1kg/tin;;5kg/tin ;20kg/drum;;25kg/drum;;200kg/drum
