Platform dimension:0.84mx1.2m Maximum capacity:0.3t-3t Platform dimension:0.84mx1.2m Maximum capacity:0.3t-3t
Platform dimension:1mx1m-3mx7m Maximum capacity:1t-30t Applicable to heavy-load steel weighing Platform dimension:1mx1m-3mx7m Maximum capacity:1t-30t Applicable to heavy-load steel weighing
ParameterValueUnit Standard capacities(emax)100, 200, 250.500, 1000, 1500, 2000, 2500, 5000, 7500, 10000Kg Standard capacities(emax)200, 500, 1k, 1.5k, 2k, 3k, 4k, 5k, 10k, 15k, 20kLbs Rated output2.00.1%3.00.1%Mv/v Zero balance1.0%fso Combined error0.05%fso Non-repeatability0.02%fso Creep error(30 minutes)0.03% applied load Creep error(20 minutes)0.02% applied load Temperature effect on output0.025% applied load/5 Temperature effect on zero0.025% fso/5 Maximum safe over load150%emax Ultimate over load300%emax Maximum safe side load100%emax Excitation voltage10V Maximum excitation voltage15V Input resistance38515 Output resistance3503 Insulation resistance>=2000M/50vdc Compensated temperature range-10~40 Operating temperature range-20~60 Cable size§¶5x6000Mm SealingIp67 WiringRed: +excitation black: -excitation green: +signal white: -signal Fso-full scale output Carton, 20pcs/ctn, 24kg, 40x40x30mm
Human composition inspector for fitness makes use of bioelectrical impedance analysis that apply to families and individuals. Bioelectrical impedance analysis is bia for short.It not only can measure body weight, but also body water, body fat, visceral fat and bone mineral content and so on.This technology has been widely used in the clinical medicine field. It¡¯s favored by household, top grade hotel , health management center, beauty shop and fitness center because of its non-invasive, accuracy and safety. Internal packing:gift box External packing:carton
Human composition inspector for fitness makes use of bioelectrical impedance analysis that apply to families and individuals. Bioelectrical impedance analysis is bia for short.It not only can measure body weight, but also body water, body fat, visceral fat and bone mineral content and so on.This technology has been widely used in the clinical medicine field. It¡¯s favored by household, top grade hotel , health management center, beauty shop and fitness center because of its non-invasive, accuracy and safety. Internal packing:gift box External packing:carton
Introduction: FB Continuous Loss-in-Weight Feeder, short for Loss in weight Feeder, is a continuous feeding device to measure the material flow by the decrease rate of material in unit time. As measuring flow rate in an approximately static weighing method, it is simple, high precision and practical. It is widely used in power, pharmaceutical, food, chemicals and building materials industries as the measurement equipment for powder material, granule material and bulk material, giving precise measurement and continuous feeding control to the various components of the material. The control system adopts PLC + HMI or intelligent instrument which is very easy to operate and is stable and reliable. It can display state of the feeder and also have friendly human-computer interaction interface. Features: 1.With simple and reliable structure design which prevent material impact during feeding efficiently and ensure excellent material flow inside the storage bin and short re-feeding time and also ensure transmission system operate well and in good linear; 2.Suitable material: non-cohesive powder and solid granule 3.Accurate continuous feeding 4.Full discharge without residue, easy and simple to clean 5.easy to stall and operate 6.High feeding precision 7.Widely measuring control range 8.The Control system can be PLC control or dynamic control instrument, which can set flow rate and operation mode, indicate total accumulation, instantaneous flow rate and output as well as other parameters for complete feeding and discharge control and also can indicate working state and alarm; 9.The control system is in modular design and can be connected to upper computer, PLC or DCS through the instrument and communication interface. It is very stable and reliable Structure: 1.The loss-in-weight feeder is composed of assist flow storehouse, manual valve, two pneumatic valve, surge bin, flexible connection, weighing bin, load cell, mixing device and screw conveyor. 2.Assist flow storehouse: adopting automatic air blow, which made material form rotational flow, preventing phenomenon of blockage and flow material; 3.Surge bin: two imported phenomenon valve act as upper and lower joint parts, which can ensure the material absolutely sealing,in this case, the material will never flow to weighing bin, thus keep a high accuracy; 4.Weighing bin: the weighing bin is designed for weighing and able to prevent bridge and material impact and also ensure smooth and well-distributed feeding; meanwhile, it is easy to dismantle during cleaning and replacing of some parts and components. The volume of the material bin depends on the feeding capacity. 5.Load cell: three highly pr¨¦cised sensors are mounted on the weighing bin and distributed at 120¡ãC ensuring the weighing accuracy. 6.Mixing device: to prevent bridging and ensure smooth and well-distributed feeding, its main structure is that add mixing activation device on top of the weighing bin with horizontal motor and reducer inside to drive vanes for mixing. 7.Screw Conveyor: high accuracy screw is used, allowing a small spacing between the screw and shell after precision processing, thus ensuring high weighing and measuring precision and stable feeding. The motor and reducer is connected directly to shaft of the screw blade which reduce the transitional steps so as to ensure high weighing accuracy. 8.All parts that contacting material are made of stainless steel, which can improve the fluidity of material and also can improve service life. Parameters: Ambient temperature: -20C~100C Working voltage: AC380V 50Hz Measuring Accuracy: 0.5% Material moisture: 2% Feeding speed: 0.03t/h~300t/h Communication interface: RS485, Mod-bus wooden case
Hardened stainless steel frame and measuring jaws Thumb roll & knurled locking screw for more convenient measurement and reading Relative/absolute measurement interchange at any position(abs function) Glass fixed grid, stable and high accuracy Quick display of the measured value on lcd screen With on-off power switch & auto power-off for option Waterproof ip54 Four function key With depth bridge Zero-setting at any position Mm/inch measurement system conversion 3v environmental battery, battery life >1 year Measurement both for id, od, depth, and steps Part no.Measuring range(mm/inch) Resolution(mm/inch)Accuracy (mm/inch). Plastic box with froam inside, then carton box, then master carton
Easy-6mm tempered glass platform Ultra slim design, its height only 18mm Easy-operation with large lcd readout Powered by 1xcr2032 lithium battery. Size: 320¡á300¡á18mm Capacity:150kg/330lb/23st Graduation:100g/0.2lb.
Product name: OCS electronic direct-viewing weighing crane scale Features: 1. Capacity :1t-30t 2. Steel die-casting enclosure 3. Accurate reading under strong shaking 4. Automatic peeling function 5. Low valtage alarm 6. Rechargable lithium battery 7. Overload sound alarm 8. Kg/lb switable 9. Remote turn on/off. Wooden boxes.
For weighing hanging loads. This type is specially designed for metallurgy and foundry industry. It is accurate, and has manyspecifications. It is multi-functional, easy to use, and has excellent anti-heat and anti-magnetic performance. It is widely used in steel making, founding, ladle plant and other placewith high temperature and strong magnetic environment. It is specially designed and improved fromcommon scales. Simple and effective crane scale. No frills weighing allows for a low price but with highperformance. "Good scales - low cost" The ocs-series are low cost crane scales for: shipping operation, foundries, food processingplants, mining industry, batching operations, offshore operation, moulding industry, testfacilities, melting process, etc Specifications: 1. Supply: 220 vac chargers. 2. IP65 3. Battery life 80-100 hours. 4. Recharging time 10 hours. 5. With tare/zero function. 6. Wireless remote controller 7. Low price. Many scales? ask for discount! 8. Warranty: 1 year. 9. Heat shield Features: 30mm(1.2inch) lcd display remote control calibration easy to replace battery packac/dc power adaptor output dc9v/1.5a 6 v/10ah rechargeable battery infrared remote controller, distance 20m hold, tare, accumulation, kg/lb conversion, gross/net conversion. Wooden boxes.
Electronic Truck Scale Standard configuration of Electronic Digital Truck Scale: weighing platform, high accuracy weighing load cell and weighing indicator. Printer, scoreboard and computer management system are optional so as to complete the requirements of data management and transmission on the higher level. Main features of weighing platform: 1. Use U-shape beam structure, scientific and reasonable, strong and durable; 2. Undersurface uses high quality antirust paint so as to increase its service life; 3. Modular, sealed cavity, anticorrosion, convenient installation. Main features of weighing indicator: 1. Use imported A/D conversion chip, which has rich practical experience in the market; 2. High resolution, can reach 1/500000; 3. Self fault diagnosis function and tare two-way recovery function; 4. Battery indication and low battery protection; 5. Can use single-layer, duplex and three-ply weight list, can be equipped with weighing software and connected to the computer. The length of Electronic Truck Scale is from 1m to 30m. The width of Electronic Truck Scale is 3.0m, 3.2m, 3.4m. The maximum weighing capacity can be 1 ton to 150 ton.
S type load cell, tension and compression good output symmetry, compact structure, simple to install, full range of capacities, suitable for electromechanical scale, crane scale, hopper scale and various special scales. Carton.
Functions: Height and Weight measurement Calculate BMI automatically Voice report synchronously Display measuring results and temperature. Packing: two cartons 58*42*20cm and 135*35*25cm.
Luggage scale OCS-13 Material : ABS Capacity: 50kg/100g Power: 1*2032 battery Product size: 13*3*4.2cm Packing: Ctn size: 33.5*33*26cm 36pcs/Ctn Gw : 6KG.
This model is mainly used for balancing rotating work pieces, Such as large and medium- sized motor rotors, blowers, pump impellers, centrifugal, drying cylinders, and rollers, mine ventilator etc. The gimbals -driving offers several rotational speeds, large driving power, high precision and easy operation etc. Specification Parameter: Mass scope of workpiece(kg) 2000 Mass diameter of workpiece(mm) 1800 The distance between two bearing pedestals(mm) Min100 Journal diameter on roller carriages(mm) 40-240 Distance from coupling flange of drive shaft to center of farthest bearing (mm) 1800 Spindle speed(r/min) 280/560/900/1800 Motor Power(kw) 7.5(variable-frequency) Universal coupling torque(N.m) 300 Minimum achievable Residual Unbalance(emar) 1g.mm/kg. Fumigated wood box.
This balancing machine is widely used in balancing rotatable bodies, such as kinds of good-sized and medium-sized motors, turbocharger,textile machinery, fans,shaft, etc .. Driven by belt,it is simple to load and unload,quick to start and with high precision and low failure rate. Specifications: Parameters Max Mass of Workpiece (kg) 50 Max Diameter of Workpiece (mm) 700 Distance between Two Support Bearings (mm) 80--700 Journal Diameter Scope of Workpiece (mm) 8~80 Diameter Scope of Driving Belt (mm) 18~200 Rotation Speed when the Diameter of Driving Belt is 100mm (r/min) 650/1000/1300/2000 Motor Power (kw) 0.55/0.75 Min Achievable Residual Unbalance Amount (emar) 0.5g mm/kg Fumigated wood box.
This balancing machine is widely used in balancing rotatable bodies, such as kinds of good-sized and medium-sized motors, impeller,roller,textile machinery, fans, shaft, etc. Driven by belt, it is simple to load and unload, quick to start and with high precision and low failure rate. Specifications Parameters: Max Mass of Work piece (kg) 160 Max Diameter of Work piece (mm) 1000 Distance between Two Support Bearings (mm) 150--1200 Journal Diameter Scope of Work piece (mm) 10~140 Diameter Scope of Driving Belt (mm) 30~350 Rotation Speed when the Diameter of Driving Belt is 100mm (r/min) 798/1274/1596/2548 Motor Power (kw) 1.3/1.8 Min Achievable Residual Unbalance Amount (emar) 0.5g mm/kg. Fumigated wood box.
This balancing machine is widely used in balancing rotatable bodies, such as kinds of good-sized and medium-sized motors, crankshaft, textile machinery, fans, shaft, etc .. Driven by belt, it is simple to load and unload, quick to start and with high precision and low failure rate. Specifications Parameters Max Mass of Workpiece (kg) 50 Max Diameter of Work piece (mm) 700 Distance between Two Support Bearings (mm) 80--700 Journal Diameter Scope of Work piece (mm) 8~80 Diameter Scope of Driving Belt (mm) 18~200 Rotation Speed when the Diameter of Driving Belt is 100mm (r/min) 650/1000/1300/2000 Motor Power (kw) 0.55/0.75 Min Achievable Residual Unbalance Amount (emar) 0.5g¡¤ mm/kg. Fumigated wood box.
Item No. DB-02 Description 1) Capacity: 20kg/5g 2) Powered by 4 x AA Batteries(Not Included)£¬ with 4 Load Cells. 3) With Memo Function 4) Unit: kg/lb 5) Product Size: 60.3x38.5x10cm.
Item No. MP-12 Description 1) Capacity: 150kg/1kg 2) Unit: kg, kg&lb 3) Cold - rolling steel Housing, 4) Skidproof Mat 5) Color: white, black 6) Product Size: 28.6x27x4.6cm Packing Display Box or White box CTN QTY 4pcs/ctn CTN MEAS. 32.1x22.9x31cm G.W./N.W. 7.48/7.02kg.
