Accelerator MBT is Used as an acid accelerator currently and a medium fast primary accelerator. Imparts excellent aging properties when used both alone and in combination with DM, TMTD and many other basic accelerators for higher activity. Its accelerative temperature is low and easily be dispersed with lower pollution. Mainly used in the manufacture of tires, tubes, foot wear rubber belts and hoses etc.
1, Product Information: All ZHW Series F80 rubber check valves are available in a wide selection of back pressure capabilities and elastomers, including GB certified material. Because of the wide array of available configurations, there?s sure to be a ZHW Series F80 valve to suit your application. ZHW Series F80 rubber check valves won?t freeze or deform, and they function solely on the inlet and back pressure which are present in each unique situation. Each rubber check valve is designed by some of the most experienced rubber technicians in the industry, and are carefully constructed using the finest engineered materials available. All of our Series F80 valves are precisely manufactured to ensure proper operation, and will provide years of unhindered, trouble-free service. 2, Product Applications: 1). Sewage systems 2). Stormwater outfall 3). Drainage systems 4). Flood control systems 5). Drainage from dams 6). Pumping stations / wet wells 7). Drainages in airports and highways 8). CSO / SSO / Effluent discharge 9). Drainages in sewers 10). Submerged outfall diffuser nozzles 11). Drainage from sewage reservoirs 12). Coarse bubble air diffusers, Sparging nozzles 3, Product Features: All-rubber construction to resist abrasive slurries ISO standard construction Ultra-quiet operation, with no water hammer Unique design to prevent backflow Negligible maintenance and energy costs Will not warp or freeze Quick interchange with any flap type check valve Available in sizes from 1� to 96�
Chemical Name: 2-Mercaptobenzothiazole Specification: Item Powder Oiled powder Granule Appearance Light yellow powder(granule) Initial M.P. C 171.0 171.0 171.0 Loss on drying % 0.30 0.50 0.30 Ash % 0.30 0.30 0.30 Residues on 150 m sieve, % 0.10 0.10 Additive, % 1.0-2.0 Granule Diameter, mm 1.0-3.0 Properties: It is light yellow powder (granule) with a little osmyl and taste bitter . Specific gravity:1.42-1.52. Soluble in ethyl acetate , ethanol , solution of NaOH and Na2CO3 , insoluble in benzene , water ang gasoline . Application: Used as an acid accelerator currently and a medium fast primary accelerator. Imparts excellent aging properties when used both alone and in combination with MBTS, TMTD and many others basic accelerators for higher activity. Its accelerative temperature is low and easily be dispersed with lower pollution . Mainly used in the manufacture of tires, tubes, footwear, rubber belts and hoses etc. Packaging: 25kg plastic woven bag , paper with plastic film bag , kraft paper bag or jumbo bag . Storage: Keep container tightly closed in a cool, well-ventilated place. The recommended maximum storage life is 2 years when stored under normal conditions.
rubber parts
Product Introduction MBTS is an accelerator of NR and SR. It has level and middle cure rate and higher Vulcanization temperature. It operates safely disperses easily and does not contaminate. It is aging resistant. White or light yellow powder or granule with slightly bit-ter taste, nonpoisonous. Application Mainly used in manufacture of tires, rubber tubes, rubber shoes, rubber cloth and other technical rubber goods. Accelerator MBTS works as plasticizer and delayed action activator in poly-chloroprene. Packing: In knitted bag lined with plastic bag or Kraft paper bag. 25kgs/bag or at buyer's request.
Zebung chemical transfer hoses were developed to be a more flexible chemical hose that could handle 98% of all chemicals including solvents and corrosive liquids for pressure and suction service. These hoses are suitable for tank trucks, barges, ships or storage tank transfer for a variety of chemical materials. The clear UHMW PE tube is mostly inert and will withstand highly corrosive products and avoid contamination through breakdown. Abrasion and Ozone Resistant The cover protects the body from stiffening and cracking caused by ozone and UV exposure. It also adds abrasion resistance for extended hose life. Non-Kinking The internal helical wire structure helps prevent kinking. Multi -Ply Acid Discharge Hose Designed to handle most of the common acids and alkali solutions under pressure. Multi-Ply Acid Suction Hose This hose features a high-tensile textile cord with wire helix to prevent collapse under vacuum conditions. Recommended Cleaning of Chemical Hose 1. Drain the hose after each use. 2. Flush with water or other neutralizing cleaning solution. 3. Properly dispose of drained fluid and cleaning waste. 4. Between uses, store the hose in a clean, dry environment away from sunlight. 5. Avoid cross contamination. Dedicate a hose to handle a specific chemical.
Introduction of rtv 2 molding silicone rubber: 1. Two-part of rtv 2 molding silicone rubber: flowable liquid silicon and catalyst. 2. Rtv 2 molding silicone rubber cures at room temperature within 4-6 hours. Features of rtv 2 molding silicone rubber: 1. Rtv 2 molding siliconerubber has an exceptional fluidity and good operability. 2. Rtv 2 molding silicone rubber hasgood temperature and deformation resistance as well as low shrinkage. 3. Rtv 2 molding siliconerubber has high duplication times. Operation step for rtv 2 molding silicone rubber: 1. Step one to use rtv 2molding silicone rubber: take 100g of part a and add 2g of part b and mix thesilicon rubber and the curing agent evenly. 2. Step two to use rtv 2molding silicone rubber: vacuum pumping 3. Without exception, thistakes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available. 4. Step three to use rtv 2molding silicone rubber: brushing cast & perfusion molding operation. 25kgs/drum vacuum package or 200kgs/drum
Introduction: JERINA Plasticizer A is mixture of selected high molecular weight saturated fatty acid zinc salt. Technical Specification: Appearance: Yellow granule Melting point deg.: 100.0-104.0 Ash content (850degX2h),%: 12.0-14.0 Zinc content %: 12.0-14.0 Iodine value, g/100g: 40.0-50.0 Performance: 1. JERINA Plasticizer A can reduce the viscosity of natural and synthetic rubber to making it easy to process. 2. JERINA Plasticizer A can improve the dispersion of filler and rubber chemicals in the rubber compound, and improve scorch safety. It also can promote vulcanization and release of vulcanized products to keep the mold clean. 3. JERINA Plasticizer A canshorten the mixing time, change flowability of unvulcanized rubber, and there is no adverse effect on the bonding of rubber and metal material. It can improve storage stability of rubber compound, especially beneficial for vulcanization process. 4. JERINA Plasticizer A also can improve compression set performance when applied in sealing strip of EPDM. Application: 1. Add plasticizer A together with rubber compound. 2. Plasticizer A is applicable to NR, SBR, NBR, EPDM etc. 3. Suggested ratio: 1-5phr Packing and Storage: 1. It is packed in Kraft paper bags lined with plastic film, net weight is 25kg/bag. 2. It should be stored in a cool, dry warehouse. 3. The shelf life is 24 months.
ITEM CARBON BLACKN220 CARBON BLACKN330 CARBON BLACKN550 CARBON BLACKN660 Loding Absorption Number (g/Kg) 114-128 77-87 39-47 32-40 Absorption Value of DBP (10-5 m3/Kg) 109-119 97-107 116-126 85-95 Absorption Value of compressing sample DBP (10-5 m3/Kg) 95-105 83-93 83-93 71-79 Adsorptive Specific Surface Area of CATB ( 10 3 m2/Kg) 106-116 77-87 38-46 32-40 Adsorptive Specific Surface Area of Nitrogen (10 3 m2/Kg) 114-124 78-88 38-46 30-40 Tinting Strength % 110-120 98-108 Heating Loss 2.5%Max 2.5%Max 1.5%Max 1.5%Max Ash Content 0.5%Max 0.5%Max 0.5%Max 0.5%Max Tensile Strength -0.5MPa Min -0.5MPa Min -3.5MPa Min -3.0MPa Min 300% Extending Stress -1.5 ¡À1.0 MPa 1.0¡À1.0 MPa 1.0¡À1.0 MPa 2.5¡À1.0 MPa 45¦Ìm Sieve Residue 0.10%Max 0.10%Max 0.10%Max 0.10%Max. Appearance: Black powder or Granular Packing: 25kgs in net PP bag, 16MT in the 20'FCL Uses: Rubber Industry, such as Tyres, Cable, Tape, etc. Packing: 25kgs in net PP bag, 16MT in the 20'FCL.
Rubber Adhesive RA/HMMM Property: This product is the improved product of Rubber Adhesive A. The appearance of this product is one kind of white powder and gives off methanal upon heating. It is hypo-methanal donator among double functioning adhesive system for rubber Specification Appearance: White powder Ash Content (850íµ), % : 30í½38 Moisture content (Boiling Evaporation Method) í_4.5 Sieve Residue (325 mesh wet-method), % í_0.3 Free formaldehyde, % í_0.1 Application: This product is used in binding Rubber with steel wire, Nylon, Rayon, fiberglass, etc. In using this product, simply mix it directly into Rubber and it can achieve good adhesive effect by vulcanizing. If this product blended with Rubber Adhesive RS, Rh, RE, it can bring in better effect. As this product is one kind of white powder, and has good dispersing feature, it is easy to measure and use. Packing: Packed in compound plastic bag, 25Kg per bag. Keep in cool and dry while storage and transportation, strictly avoid damp. Packing:Packed in compound plastic bag, 25Kg per bag. Keep in cool and dry while storage and transportation, strictly avoid damp.
Rubber Vulcanizing Agent (Insoluble Sulfur)OT20 (IS-HS-7020 highly thermal stability) Technical Specification Appearance: Yellow Powder (Non-flying) Sulphur Content (%): 80.0í+1.0 Insoluble Sulphur Content (% min.): 72 High temp. Stability (% min.) (105íµ*15min): 75 Oil Content (%): 20.0í+1.0 Acid Content (As H2SO4), % max.: 0.05 Heating Loss (60íµ*2h), % max.: 0.40 Ash, % max.: 0.15 Fineness(100mesh), % min.: 99.8
Packing and storage: OT20 is packed in a25 kg bag with PE lining and stored in a ventilated cool, dry place under normal conditions. Storage temperature should be less than 40íµ. Keep away from a fire heat and moisture. It cannot be stored together with amine and alkalescences, preventing blocking from stacking. Guaranteed storage is half a year. Packing: Packing and storage: IS7520 is packed in a25 kg bag with PE lining and stored in a ventilated cool, dry place under normal conditions. Storage temperature should be less than 40íµ. Keep away from a fire heat and moisture. It cannot be stored together with amine and alkalescences, preventing blocking from stacking. Guaranteed storage is half a year.
Crosslinking agent, rubber additive (actor-TDDS, accel-BF, actor-JCSS, ACCEL-808, actor-512), pharmaceutical intermediates (DMTD), CPE, actor, 512A, 512B, vulcanizing agent, cross linking agent, CM rubber.
Product name: insoluble sulfur Cas no.: polymeric sulfur: 9035-99-8 Hs insoluble sulphur had been widely used in natural rubber and a variety of synthetic rubber. They are made with tire and rubber products such as: rubber belt, rubber pipe and sealants etc. They are specially used in radial truck tire making. Product standard: (enterprise standard) q/320206gad03-2008 Rubber vulcanizing agent Insoluble sulfur can improve the resistance to both fatigue and ageing of all kinds of rubber products. It is used as the best vulcanizing agent for rubber. And it is widely used in the manufacture of the rubber chemistry such as tire, rubber pipe, shoes, cable and wire, insulating materials, latex, and all kinds of automobile rubber parts, especially for radial tires. Technical specification Appearance: yellow powder (non-flying) Sulphur content (%): 66.0-68.0 Insoluble sulphur content (% min. ): 90.00 High temp. Stability (% min. ) (105 degree*15min): 80 Oil content (%): 19.0-21.0 Acid content (as h2so4), % max.: 0.05 Heating loss (60 degree *2h), % max.: 0.40 Ash, % max.: 0.05 25
Technical specification Appearance: yellow powder (non-flying) Sulphur content (%): 79.0-81.0 Insoluble sulphur content (% min. ): 90.00 High temp. Stability (% min. ) (105 degree*15min): 80 High temp. Stability (% min. ) (120degree*15min): 50 Oil content (%): 19.0-21.0 Acid content (as h2so4), % max.: 0.05 Heating loss (60 degree *2h), % max.: 0.40 Ash, % max.: 0.05 25kg
Rubber adhesive ra-65(hmmm) Property: this product is the improved product of rubber adhesive a. The appearance of this product is one kind of white 3 Free formaldehyde, % ≤ 0.1 Application: this product is used in binding rubber with steel wire, nylon, rayon, fiberglass, etc. In using this product, simply mix it directly into rubber and it can achieve good adhesive effect by vulcanizing. If this product blended with rubber adhesive rs, rh, re, it can bring in better effect. As this product is one kind of white powder, and has good dispersing feature, it is easy to measure and use. Packing: packed in compound plastic bag, 25kg per bag. Keep in cool and dry while storage and transportation, strictly Standard
Zinc oxide 99% Content (zno)% --------------------99min Mno%-------------------------------0.001max Pbo%-------------------------------0.15max Cuo%-------------------------------0.001max Heat loss%-------------------------0.3max Hcl insoluble matter%--------------0.01max Water soluble matter%--------------0.1max 45um sieve residue%----------------0.15max Zinc oxide 99.5% Content (zno)% --------------------99.5min Mno%-------------------------------0.0005max Pbo%-------------------------------0.05max Cuo%-------------------------------0.0005max Heat loss%-------------------------0.3max Hcl insoluble matter%--------------0.01max Water soluble matter%--------------0.1max 45um sieve residue%----------------0.15max Zinc oxide 99.7 Content (zno)% --------------------99.7min Mno%-------------------------------0.0004max Pbo%-------------------------------0.037max Cuo%-------------------------------0.0004max Heat loss%-------------------------0.3max Hcl insoluble matter%--------------0.01max Water soluble matter%--------------0.1max 45um sieve residue%----------------0.15max Appearance: white powder Packing: 25kg in net pp bag, 20mt in the 20'fcl Uses: rubber industry, paints industry, ceramics industry, floor tile, glass, feed additive, etc. Appearance: white powder Packing: 25kg in net pp bag, 20mt in the 20'fcl
Rubber Chemicals, MBT, MBTS, TBBS, CBS, DCBS, ETU, TIBTD, TBPP, ROSIN, ZDEC, ZDBC, ZMBT, TETD.Technical support, commercial support
Rubber chemicals.
