Advantages: Bar-break feature guarantees fully ductile elongation. No reduction of the bar cross-section area. Material of the rebar coupler is No.45 steel. Working principle: 1,First,We use GQ50 rebar cutting machine to splice up the end of rebar. 2,Secondly,we use Upset Forging Parallel Thread Machine (BDC-Auto1 Machine) to forge the end of rebar. 3.Third, we use Parallel Thread Cutting Machine (LW-I500 Machine) to thread the ends of the rebar which have been forged. 4.Fourth,an upsetting coupler is used to link the two ends of rebar in parallel thread.
1.Standard Model:used in the occasion for connecting the steel bar in normal situation 2.Different Diameter Model:used for connecting the steel bar in different diameters 3.Flared Model:used for the steel bar which was hard to match 4.Positive And Negative Screw Thread Model:used in the occasion when the steel bar in the two sides both can not be turned but the lengths can be adjusted. 5.Locking Nut Model:used when the steel bar can not be turned, then it turns the splicing coupler to join the steel bar and then lock the splicing coupler with the locking nut.
Standard taper thread couplers are designed to splice the same diameter bars where one bar can be rotated and the bar is not restricted in its axial direction.It is designed to achieve failure loads in excess of 115% of the caracterisitc strength of grade 500 rebar end. Transition taper thread couplers are designed to splice different diameter bars where one bar can be roated and the bar is not restricted in its axial direction. Taper Thread Working Principle: 1.Slice up the end of the rebar; 2.Make the rebar taper thread cutted by taper thread machine. 3.Connect together two taper thread end by One piece of Taper Thread Coupler. Taper thread position couplers are designed to quickly splice column sections or precision coupling of elements with multiple bars jointed over a short span, such as prefabricated elements, and the closing of small temporary openings. Taper thread anchor plate provides an alternative to hooked rebar,or an anchor or stop nut for rebar passing through a pile bank or structural steel element.The fraont face of the coupler is generously designed to carry the full tension load of the rebar when the anchor is bearing against concrete or structural steel.
Product Name silicon steel stamping rotor Material cold rolled non-oriented silicon steel Supplier WISCO, BAO STEEL ,SHOUGANG GROUP,TISCO Process Heat treatment, Annealing and Turning Surface Standard DIN GB ISO JIS Range Φ 100mm -- Φ 590mm Stacked length Max 1100mm Service OEM&ODM Packing PP + Solid Sea-worthy Carton with special process of antirust Delivery Time 10 Days if existing compound tools are available/50 Days if we need to making tools
Product Name electric motor stacking stator laminated iron core Material cold rolled non-oriented silicon steel Supplier WISCO, BAO STEEL ,SHOUGANG GROUP,TISCO Process Heat treatment, Annealing and Turning Surface Standard DIN GB ISO JIS Range Φ 100mm -- Φ 590mm Stacked length Max 1100mm Service OEM&ODM Packing PP + Solid Sea-worthy Carton with special process of antirust Delivery Time 10 Days if existing compound tools are available/50 Days if we need to making tools
Product Name motor silicon steel lamination Material cold rolled non-oriented silicon steel Supplier WISCO, BAO STEEL ,SHOUGANG GROUP,TISCO Process Heat treatment, Annealing and Turning Surface Standard DIN GB ISO JIS Range Φ 100mm -- Φ 590mm Stacked length Max 1100mm Service OEM&ODM Packing PP + Solid Sea-worthy Carton with special process of antirust Delivery Time 10 Days if existing compound tools are available/50 Days if we need to making tools
Product Name electric motor stacking stator laminated iron core Material cold rolled non-oriented silicon steel Supplier WISCO, BAO STEEL ,SHOUGANG GROUP,TISCO Process Heat treatment, Annealing and Turning Surface Standard DIN GB ISO JIS Range Φ 100mm -- Φ 590mm Stacked length Max 1100mm Service OEM&ODM Packing PP + Solid Sea-worthy Carton with special process of antirust Delivery Time 10 Days if existing compound tools are available/50 Days if we need to making tools
Product Name motor silicon steel lamination Material cold rolled non-oriented silicon steel Supplier WISCO, BAO STEEL ,SHOUGANG GROUP,TISCO Process Heat treatment, Annealing and Turning Surface Standard DIN GB ISO JIS Range Φ 100mm -- Φ 590mm Stacked length Max 1100mm Service OEM&ODM Packing PP + Solid Sea-worthy Carton with special process of antirust Delivery Time 10 Days if existing compound tools are available/50 Days if we need to making tools
The Expansion joints Material is 0Cr18Ni9,size 276x155,it used in ferroalloy furnace, ferrosilicon furnace, calcium carbide furnace
65Mn steel crusher wear parts screen Materials: High carbon steel wire Low carbon steel wire Stainless steel wire Copper wire Wire diameter: 1.0-12.7mm Mesh/aperture/hole size: 2.0-150mm Width and length: 1*2, 1.5*2.5 and  2*3m Edge type: cut edge and over hooked or as your required Packing: in pallet or binding with steel belt Applications: mine and stone works, glass factory, coal factory, hardware, food and chemical Screen production process: Drawing wire-crimped wire-cutting wire-woven screen-cut screen-in roll/in sheet
Product features: high temperature, high pressure Application: pressure or seal isolation of vacuum valve Flexible sealing connection for various fluid pipelines Temperature and pressure compensation for various fluids
Features: high sensitivity, large compensation, good linearity, long life Widely used in vacuum technology, hydraulic, petrochemical, electronics, aerospace and atomic energy and other industrial fields.
This can be used as a sensitive component in the precision instruments of various industrial departments. Can also be used in chemical engineering, energy engineering, as a variety of media transmission, connection, sealing components. Product features: small size, light weight, good elasticity. Material :Stainless steel
Product features: high temperature, high pressure Application: vacuum equipment, instrumentation, aerospace and other fields.
Advantages: good flexibility, good sealing, easy installation Because of its light weight, small size, corrosion resistance, high pressure and other characteristics are widely used in aerospace, petrochemical, metallurgy, paper, food transportation and other industries.
The utility model can be used as a sensitive component in the precision instruments of various industrial departments.Can also be used in chemical engineering, energy engineering, as a variety of media transmission, connection, sealing components. Product features: small size, light weight, good elasticity Material:Stainless steel
Mine hoist can be divided into two kinds; one kind is JKE series single rope mining hoist and the other is Multi-rope friction hoist. This series mine hoist including 2m-5m single tubular and double tubular types, and can be used for mining hoist, personnel lifting and material and equipment descending from vertical shafts or inclined shafts of coal, metal and nonmetal ores. JK mine hoist is mainly used in inclined roadways and wells of coal mines, metal mines and non-metal mines to hoist or lower personnel and materials.
China hot water boiler spare parts enamel tube with asme standard is manufactured with the enamel which is developed by our company with the scientific formula and is evenly coated on the surface of the steel tube by the auto enamel tube production line. To use enamel tube as the heat exchange parts will be anti-abrasion and anti-corrosion, the surface is smooth and low cost of maintenance. The introduction of China hot water boiler spare parts enamel tube with asme standard. Material: carbon steel, corten steel or equivalent The air preheater exists the problem of collection of ash, worn down, low temperature corrosion to effect the safe and economical operation for the boiler unit. At the moment, the investment for air preheater is 6%-8% of the whole boiler investment in the industrial boiler and power station boil, due to the problem of collection of ash, worn down, low temperature corrosion to incur the direct loss of replacing equipment and shuting down is 4-5% of the operation cost and loss will be more large when the boiler is shut down incurred by this problem. Aim at the above questions, we established the exclusive enamel research and development center to supply the complete solution and organize the specific research personnel to tackle key problems, and proceed the large quantities of simulated test and operation test to develop the new heat transfer parts ---enamel tubes and received 5 patents.
The problem of collection of ash, worn down, low temperature corrosion exists in the air preheater to effect the safe and economical operation for the boiler unit. At the moment, the investment of air preheater is 6%-8% of the whole boiler investment in the industrial boiler and power station boil, due to the problem of collection of ash, worn down, low temperature corrosion to incur the direct loss of replacing equipment and shutting down is 4-5% of the operation cost and the loss will be more large when the boiler is shut down incurred by this problem. The enamel steel tube is manufactured with the enamel which is developed by our company with the scientific formula and is evenly coated on the surface of the steel tube by the auto enamel tube production line. To use enamel tube as the heat exchange parts will be anti-abrasion and anti-corrosion, the surface is smooth and low cost of maintenance.
Air preheater rotor is divided into compartments in which the heating elements are packed. Heating Elements in the air preheater plays a major role for the heat transfer. Characteristics 1) Compact structure and occupying less space 2) A significant reduction in overall size and weight 3) Easy and economic replacement of the heating surface with separate cold and hot end packs Features 1) Manufactured by Germany production equipment 2) Adopting electrostatic coating technology 3) Using enamel glaze imported from America and Germany
