Product description Single phase standard power supply is suitable for power department, quality control department, research units, institution of higher learning, electric energy meter, power supply management, load control, power quality, reactive power compensation device and production of the enterprise and so on. It can be as single phase voltage source, current source and power source. Electrical parameters Electrical parameters Accuracy class 0.05, 0.1 Power supply Single phase AC 85-265V, 50 60 Hz AC Voltage output Range 57.7V 100 V 220V 380V, Switch automatically max 500V Adjustment resolution 0.01, 0.1, 1, 10 AC Voltage output Range 57.7V 100 V 220V 380V, Switch automatically max Adjustment resolution 0.01, 0.1 1, 10, Accuracy 0.05 RG Stability Better than 0.01 RG 1min Distortion degree Better than 0.1 not capacitive load Load capacity 40VA Full load regulation rate Less than 0.01 RG Full load regulation time Less than 1ms Temperature drift 8 PPM C Long-term stability 60 PPM year
Detail of Goods: Three phase three wire type. Number of measuring circuits: 1 circuit. Measurement items: power consumption (consumption and regeneration), current, voltage, power, power factor, etc. it is a product group of elevtric energy measurement modules that can simply measure a variety of energy information. With only one module, you can measure various detailed information related to power (consumption and regeneration), reactive power, current, voltage, power, power factor and frequency. 1 / O module user manual. The minimum and maximum values can be continuously monitored without ladder program, and two types of upper / lower limit alarm qh42f can be executed. The power used by the output device can be measured only during the on state. Therefore, the power during the operation of the equipment and the power in the beat unit can be obtained. Using 3-phase 3-wire products in one slot can measure up to 4 circuits, and using 3-phase 4-wire products can measure up to 3 circuits Therefore, through multi circuit products, electric energy measurement can be implemented in a small space. | / O module user manual. For example, one module can be used to measure other loads from the control panel trunk line. In addition, GX works2 (version 1.90u and higher) can be used to easily set parameters and bidirectional controllable brick output; 32 o'clock. Rated current and voltage: AC100 ~ 240V_ 0.6a/1 point, 2.4a/1 public end, 8:1 public end Mitsubishi | / O module user manual. Response time: 1ms 0.5 cycle. External wiring connection mode: 38 point terminal block (terminal block is sold separately). Replacement model: ay23, output: 2 channels, Input (resolution): 0 ~ 4000: - 4000 ~ 4000:0 ~ 12000-12000 ~ 12000: - 16000 ~ 16000 output: DC-10 ~ 10V: dc0 ~ 20maqh42p user manual. Conversion speed: 80us / 1 channel. 18 point terminal block. Transformer isolation between power supply and output. High insulation strength and withstand voltage. It can isolate electrical interference, such as current and noise. Standard analog input module. Isolated analog input module. No external isolation amplifier is required. When the inter channel isolated analog quantity module is not used. Qh42p user manual when using inter channel isolated analog module. Expand the possibility of control with intelligent functions. Provide various analog modules, which is an ideal choice for process control applications. It can also meet the needs of high-speed and high-precision control.
Always Be Your Beat Partner the company focuses on industrial automation PLC and DCS modules. Our company has over ten years experience in the automatic control field. Full of sincerity service gives you access to the global supply of automation parts at your fingertips, ensuring that you can keep production lines up and running. has become a leading supplier of machine and control parts by providing quality parts and equipment at the right price and right time. Many parts are stocked and available with very short lead times to ensure your parts are available when you need them. the well-known manufacturers, We also offer a wide range of services. Our Advantages PLC Processor . DCS Controller . HMI Panel . I/O Module . Power Supply Module . Proximitor . ControlLogix Chassis . Robot DSQC . PLC Cable . DCS Cable. You want to know Quick response 24/7 Online Service Quick supply large in stock,ship today PACKING Packing is factory seal SHIPPING By sea, by air or by express Warranty 1 year Warranty
Product description 120KV 10ma DC Cable Test System is an important equipment for DC voltage withstand test and leakage current test of HV electrical equipments, cables, surge arresters in electriv industry and power supply departments. 120KV 10ma DC Cable Test System is developed based on the calibration made by National HV Meterage Station, it accords with the standard "Generation Requirement of Portable HVDC Generator"(ZGF 24003-90) Technique Index 1. power: AC220V+10%, 50Hz+1% 2. Output voltage indicator accuracy:
This product is portable design,used in field to check watt-hour meter error. Accuracy class:0.05. 6.4inch TFT COLOR LCD measured CT variable ratio 0-600V/1MA-12A Check wiring and calculation electricy of compensation.
Product description Electrical equipments in modern industrial, commercial and residential users are more sensitive to power quality, and have a higher requirement of quality of power supply. Currently, harmonics,electromagnetic interference, power factor reduction have been tied to the three hazard of the power system. When it is interfered or contaminated, grid power quality can t reach the national standards, so it has to be targeted on the grid power quality improvement. To understand the actual situation of power quality, you must have the appropriate equipment to test and analysis the actual situation. Counter the domestic condition, our company developed the professional power quality analysis instrument, which is suitable for the country. 3 phase handheld power quality analyzer Technical index Input characteristics Voltage measuring range 0 200V 800V, automatic cutting gear. Current measurement range Clamp transformers three types 5A 25A standard 100A 500A optional 400A 2000A optional Phase angle measuring range 0 359.99 Frequency measurement range: 45 55Hz. Voltage channels three channel UA UB UC Current channels three channel IA IB IC Maximum harmonic analysis times 63 times. Maximum continuous storage period in 1 minute interval: 18 months. Accuracy Measurement of electrical parameters section: Voltage 0.2% Frequency 0.01Hz Current, power 0.5% Phase 0.2 Power quality section Fundamental voltage tolerance 0.5% F.S. Fundamental current tolerance 1% F.S. Phase between fundamental voltage and current measurement erro0.2
High Voltage Insulator for power equipment
Product description Insulating boots and gloves withstand voltage device is a power frequency power supply with low voltage working voltage of 220V/50Hz for insulating boots and gloves. According to the principle of electromagnetic induction, the input voltage is changed to the minimum value required for the test. high pressure. Insulating boots (gloves) withstand voltage test device generally consists of a special dedicated test box, an intelligent power frequency withstand voltage console, and a power frequency withstand voltage test transformer. A special water tank can be customized according to needs to test 6-8 insulated boots or 6 insulated gloves at a time, and display the leakage current of the insulated boots or insulated gloves at the same time. The intelligent power frequency withstand voltage console is equipped with overcurrent protection and zero protection. Time protection and alarm function. The preventive voltage resistance test device for insulating boots and gloves is a special product developed and produced according to the needs of users according to the test procedures of insulating boots (gloves). The selection has an automatic boost (buck) function, automatically reads the leakage current of each test product, the whole process is automatically completed, and the test data is automatically printed, which effectively solves the previous non-standard test methods, thereby simplifying .Simplifies the test procedure and improves the test speed. More reliable identification of parameters such as leakage current and power frequency withstand voltage of insulating boots (gloves). To ensure the safety of test personnel, it is an ideal pre-treatment of insulating boots (gloves) to protect power frequency withstand voltage test equipment. Technical Parameters Input voltage AC220V 50 Hz Output voltage 0~30kV Capacity 3kVA Test number 3 pairs each time Quality Gloves (insulating boots) test car: 80kg; power frequency withstand voltage test bench: 70kg
is a strong technical force, first-class product quality, Company products covered a wide range of products sold worldwide, a number of users trust. Acting foreign first-class brand, MOOG, EATON VICKERS, star, and so on products. Guarantee genuine, the spot sale. provides multiple types of spare parts and equipments for power plant : #DF-THERMOMETER WTY-1021-DF mechanical seal DBF100-80-230 thermocouple type TE-110 mechanical seal for pump 100-65-260 Bearing NU222E.M1.C3 thermocoupl 1000 TE-203 mannual Regulating valve B72G-2GK-QD3-RMN multi stage centrifugal pump 100-80-125A valve DRV25-1-10B/2 Fiberglass tape ET100-25 thermowell WRNK-322 axial piston pumps 2.5MCY14-1B sealing ring HB4-56J8-08 centrifugal pump parts DFB100-65-260-03 circulation pump oil filter W.38.Z.000161 high pressure piston pump PVH74QIC-RSM-IS-10-C25-31 mechanical seal 33 mm 125-80-250 pressure hose CSH/M20*1.5-1500-A (M16*2/M20*1.5) thermocouple k TE-105 screw pump diagram HSNH4400Z-46NZ globe valve J1F1.6P-50 motor universal coupling A10VS018DFR1/31RPPA12K01 thermowell WRNK2-331\6\KAmplification and Detection Card 2L1367 screw pump diagram NM031BY01L06B oil pump price 100LY-215-2 Diectional Valve 4WE6D62/EG220N9K4/V/60 single screw pump SNH280R54E6.7W21 pressure hose S110-AC-AC-0320 centrifugal pumps DFB80-50-220 pt100 thermocouple TE-404 THERMOMETER WTY-1021 pressure hose SMS-10/20-3048mm-B thermowell stainless TE-208 vacuum pump price P-1759 rtd thermocouple WRNK2-331 LVDT displacement sensor HTD-100-6 Gate valve Z961H-64 centrifugal pump DFB80-50-20 centrifugal pump parts YCZ50-250C dc screw pump 3GR50*4A pt100 rtd probe thermowell TC03A2-KY-2B/S19 metal spiral gasket D600B-271000A022 dc screw pump DLZB820-R64A-13 thermocouples extension lead wires WRN-332NM Thermocouple Cylindrical sensor WREK2-230 hydraulic jack pump 16g2at-hmp(dn25)dko25-1600 piston vacuum pump 2.5MCY14-1Bmechanical seal pdf 104G-40 manual vacuum pump P-1803 globe throttle check valve LJC65C-4.0P rtd thermocouple TE-402 vaccum pump P1825BThermometer SH01.91.07-1 Platinum Wire WRNKD2-291 Retaining Ring YT668Y-64 Valve L05HXBP6NEA2-K thermocouple digital TC03A2-KY-2B/SPG screw pump diagram HSNH660-40NZ axial piston variable pump A10VS0100DR13/31R-PPA thermistor WRN2-630 COLLECTOR RING 3Q4321 THERMOMETER WTY-1021 DFYL-2022-2-16-ZYR
Overview zinc oxide arrester tester is a special instrument used to test the electrical performance of zinc oxide arrester. The instrument is suitable for live or power failure detection of zinc oxide arrester of various voltage levels so as to timely detect the internal insulation damp and valve aging and other dangerous defects. zinc oxide arrester tester is easy to operate and easy to use. The whole measuring process is controlled by single chip microcomputer. It can measure the total current resistive current and its harmonics power frequency reference voltage and its harmonics active power and phase difference. The instrument uses digital waveform analysis technology harmonic analysis and digital filtering software anti-interference methods to make the measurement results accurate and stable. Parameter: 1. Full current measurement range: 0-10mA effective value 50Hz/60Hz accuracy: (reading 5% + 5a) 2. Measurement accuracy of resistive current fundamental wave (secondary method without Interphase Interference): (reading 5% + 5a) 3. Current harmonic accuracy: (reading 10% + 10a) 4. Reference voltage input range: 25V-250V RMS total harmonic content 30% 50Hz/60Hz 5. Reference voltage measurement accuracy: (reading 5% + 0.5V) 6. Voltage harmonic measurement accuracy: (reading 10%) 7. Angle between fundamental current and fundamental voltage: 0-360 8. Working time of battery: 6 hours of main engine charging power supply: 220 V 10% 50Hz/60Hz charging time: 5 hours 9. Host volume: 325 280 140 10. Host weight: 3.5kg (without cable)
Power plant using Relay DZ6B/3Z It is special . power spare parts service is committed to thermal power plants, hydropower station spare parts production and supply. Long-term for the power plant to provide a large number of steam turbine spare parts, turbine generator spare parts, boiler spare parts, turbine spare parts accessories, water turbine generator spare parts, generator cover plastic seal, steam turbine cylinder head high temperature sealant, Oil cooler, mirror plate, steam turbine heating rods and other power plant spare parts spare parts. Welcome to inquire provides multiple types of spare parts and equipments for power plant : #DF-Relay DZ6B/3Z-DF Primary gear shaft oil guarder YOT51-00-02 Gasket HZB253-640-03-07 part no.:32 Temperature sensor, Pt100 WZPK2M-201 Triple probe KR939SB3 Linear transducer A157.33.01.31 thermocouple k type WRNK2-332 EH oil pump outlet unloading valve rpgc-lav piston vacuum pump M03EA10VSO45DFR1/31RVPA12 pump hydraulic power 40AY35X11 oil change pump 65AY50X6 Type K Thermocouple Cartridge WRNK2-430NM/DN50 thermocouple wire TE-110 mechanical seal 53 mm DBF100-80-230 rtd thermocouple WRNK2-294bearing 6308 C3 SKF mechanical seal 36 mm 1D56-H75/95-00 00 11 vacuum oil pump 30SPEN thermocouple digital W08B0691A double mechanical seal 104-40 k type thermocouple 1200c TE-208 industrial centrifugal pump DFB 80-50-220 dc screw pump SMH120-42W1Q1 pump screw ACF090N4 hydraulic valve SM4-20(15)57-80/40-10-H607H centrifugal pump vertical DFB125-80-250-20 solenoid valve 8327B001 shaft seal mechanical 108-45 thermocouple wzpk 230 pt100 WRNK2-332 pump mechanical seal 10014CH1-5008 pumps parts hydraulic 16g2at-hmp(dn25)dko25-1600 Relay DZ6B/3Z piston pump parts 25MCY14-1B vacuum pump price P-1825 Platinum-Iridium Wire TE-110 thermocouple temperature sensor TC03A2-KY-2B/S12 M6 thread TC03A2-KY-2B/S12 Filter Element PCHG-12 SCH B pt100 thermocouple TE-111 oil pump 125LY-35-4 thermocouple k TE-301 oil vacuum pump KZ/100WS burgmann mechanical seal G50 oil lubrication pump 2cy-45/9-1B oil pump cost 16G2AT-HMP(25)-DK025-1400 mechanical rubber seal BKM79.4143B solenoid valve (AST) 73B.776.5Z 0616SJ three screw pump HSND280-46 temperature thermocouple WRN2-630 Hammering Motor Dual Speed Motor YD2-90L-6/4 W thermowell WRNK2-291 5 k type thermocouple TE-107 high pressure piston pump PVH098R01A250000002001AB010A Speed sensor CS-3-M16 piston pumps 10PCY14-1B Contact oil baffler (E.E) 3Q7319 dc screw pump SMH80R42E6.7W21 screw pump manufacturer DLZB820-R64A Surface Thermocouple TE-204 Limit Switch WK electric centrifugal pump head 125-80-260 Relay DZ6B/3Z DFYL-2022-2-16-ZYR
Product description Single-phase standard power supply is suitable for power department, quality control department, research units, institution of higher learning, electric energy meter, power supply management, load control, power quality, reactive power compensation device and production of the enterprise and so on. It can be as single phase voltage source, current source and power source. Electrical parameters Electrical parameters Accuracy class 0.05%, 0.1% Power supply Single phase AC 85-265V, 50/60 Hz AC Voltage output Range 57.7V / 100 V / 220V / 380V, Switch automatically (max 500V) Adjustment resolution 0.01%, 0.1%, 1%, 10%, AC Voltage output Range 57.7V / 100 V / 220V / 380V, Switch automatically (max Adjustment resolution 0.01%, 0.1%, 1%, 10%, Accuracy 0.05% RG Stability Better than 0.01% RG/1min Distortion degree Better than 0.1% (not capacitive load) Load capacity 40VA Full load regulation rate Less than 0.01% RG Full load regulation time Less than 1ms Temperature drift 8 PPM C Long-term stability 60 PPM/year AC Current output Range Adjustment resolution Accuracy Stability Distortion degree Load capacity Full load regulation rate Full load regulation time Temperature drift Long-term stability 0.1A / 0.25A / 0.5A / 1A / 5A / 10A / 20A / 50A / 100A, Switch automatically 0.01%, 0.1%, 1%, 10%, 0.05% RG Better than 0.01% RG/1min Better than 0.1% (not capacitive load) 40VA Less than 0.01% RG Less than 1mS 8 PPM C 60 PPM/year
