The FiberHTT HPBT3R2-L2 single mode transceiver is small form factor pluggable module for duplex optical data communications such as 10GBASE-ER/EW defined by IEEE 802.3ae. It is with the SFP+ 20-pin connector to allow hot plug capability. The HPBT3R2-L2 module is designed for single mode fiber and operates at a nominal wavelength of 1330nm or 1270nm;.The transmitter section uses a multiple quantum well DFB, which is class 1 laser compliant according to International Safety Standard IEC-60825.The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.
The FiberHTT H9S3124-L2 Transceiver is a high performance, cost effective module, which is compliant with Gigabit Ethernet and Standard of IEEE-802.3. This transceiver operates at the normal wavelength of 1310nm. The transmitter section incorporates an advanced FP and driver IC with temperature compensation and automatic power control function. The receiver section incorporates an efficient InGaAs/InP PIN photodiode and transimpedance with AGC for wide dynamic range. The transceiver has excellent immunity and reliability.
The FiberHTT H9B5324-L2 Transceiver is a high performance, cost effective module, which is compliant with Gigabit Ethernet and Standard of IEEE-802.3. This transceiver operates at the normal wavelength of Tx 1550nm Rx1310nm. The transmitter section incorporates an advanced DFB and driver IC with temperature compensation and automatic power control function. The receiver section incorporates an efficient InGaAs/InP PIN photodiode and transimpedance with AGC for wide dynamic range. The transceiver has excellent immunity and reliability.
The FiberHTT H9B3524-L2 Transceiver is a high performance, cost effective module, which is compliant with Gigabit Ethernet and Standard of IEEE-802.3. This transceiver operates at the normal wavelength of Tx1310nm Rx1550nm. The transmitter section incorporates an advanced FP and driver IC with temperature compensation and automatic power control function. The receiver section incorporates an efficient InGaAs/InP PIN photodiode and transimpedance with AGC for wide dynamic range. The transceiver has excellent immunity and reliability.
Hot Pluggable QSFP28 form factor Supports 101.3Gb/s aggregate bit rate Maximum link length of 70m on OM3 MMF and 100m on OM4 MMF Single MPO-12 receptacle Power dissipation:
FiberHTT 100G QSFP28 LR4 integrates four transmitter and receivers into one module. In the transmitter side, the four lanes of optical data channels are optically multiplexed by the integrated optical multiplexer. In the receive side, the four lanes of optical data channels are optically de- multiplexed by the integrated optical de-multiplexer. Each data channels are recovered by a PIN photo- detector and trans-impedance amplifier, retimed. The product is designed with form factor, optical/electrical connection and digital diagnostic interface according to the QSFP28 Multi-Source Agreement (MSA) and compliant to IEEE 802.3ba.
Sintai Communication's DWDM/CWDM platform offers 1U, 2U, 5U carrying chassis and 1.25G~400G transponders/muxponders for transmitting any access service from 100Mbit/s~100Gbit/s with unified network management, pay-as-you-grow architecture and flexible configuration to save your valuable time, space and cost. Our OTNS8600 I/II/V series equipment is widely used in the fields of telecom operation, ISP, electric power, IDC, education, transport, radio and television, network security, big data, and cloud services. Types of DWDM/CWDM Platform DWDM/CWDM Platform SINTAI DWDM/CWDM platform consists of 1U (OTNS8600 I), 2U (OTNS8600 II), 5U (OTNS8600 V) chassis to support transmission service. OTU Muxponder SINTAI develops OTU Muxponder series including 400G Muxponder, 200G Muxponder, 100G Muxponder, 40G Muxponder, are suitable for OTNS8600 I/II/V platform. OTU Transponder SINTAI develops OTU Transponder series including 100G Transponder, 25G Transponder, 10G Transponder, 2.5G Transponder, are suitable for OTNS8600 I/II/V platform.
PDS is a professional China rugged tablet PC manufacturer refers to sturdy and durable tablets, which can be used in various complex and harsh environments, and are widely used in various scenarios such as power inspection, outdoor surveying and mapping, logistics and express delivery, and factory inventory. PDS Tech rugged tablet PC China supplier provides� oem mobile data terminal customized services for custom rugged tablets in various sizes from 7 to 10.1 inches to meet customer needs. Rugged Tablets for Sale R10 Rugrged Tablets 10.1" Rugged Android Tablet 64-bit processor, quad-core Cortex A53, frequency 1.5Ghz Android 10.0 Operating System GNSS, Bluetooth, WiFi IP 65 Waterproof, Drop Protection MlL-STD-810G R7 Rugged Tablets (for Construction) 7" Rugged Android Tablet 64-bit processor, 4-core Cortex A53@1.5Ghz, passed AEC-Q100 testing Android 10.0 Operating System GNSS, Bluetooth, WiFi IP 65 Waterproof, Drop Protection MlL-STD-810G PDS China Rugged Tablet PC Features IP67� rugged tablet computer 7-10.1 inch can be customized Can support ordinary GNSS positioning or high-precision RTK positioning 4G network or 5G network support in different countries Affordable� mobile data terminal price
R7 can obtain more vehicle information and operation information on construction vehicles, which can effectively help operators improve work efficiency and reduce operation risks. R7 Rugged Tablets for Construction Highlights Professional  custom rugged tablets  R&D team can provide best technical support. Over 15 years experience to provide OEM and ODM service all over the world.  Support small quantity Pilot-Run for customers to do all the function test.  Strong Quality Control during all the process of production from EVT, DVT, PVT to MP.  We provide ID design, R&D design, ODM/OEM all kind customized services of  durable tablets for construction to customers Tablets for Construction  Benefits Portability: Construction tablets are designed for ease of portability. They are lightweight and compact, allowing construction workers to keep them on their person or in their toolboxes. Durability: PDS durable tablets for construction are built to withstand the hazards of construction sites. They are shockproof, dustproof, and waterproof, protecting them against accidental drops and impacts.
R10� industrial tablet computer is a 10.1-inch short-range remote control tablet for construction work vehicles. The industrial rugged tablet PC has 3 analog buttons and multiple digital buttons. Through WIFI or other wireless technologies, this china rugged tablet pc can realize short-range control of vehicles to operate as required and improve efficiency. (in development. . .) Highlights of R10 Rugged Tablets for Industrial Use R10 remote control rugged industrial tablet, you can control the vehicle remotely and accurately through the rugged mobile data terminal tablet The R10 industrial rugged tablet PC is suitable for remote control operation of mining trucks, engineering operation vehicles, and logistics and warehousing vehicles The R10 industrial tablet PC can support customized high-precision operation and realize precise operation. For difficult operation environments, this industrial tablet computer can reduce the risk of manual operation and realize remote operation through remote control.
This product is a smart home security alarm system, which combines home security, healthy life and elderly care. It transmits alarm information through dual network of Wi-Fi and GSM, simple, safe and fast. Bluetooth network configuration, faster and more stable! Wherever you are in office, or on a business trip at abroad, it is with you. You could know the status of your smart intruder alarm system, monitoring whatâ??s happening in the house, keep close to your parents, even whatâ??s the humidity and temperature indoor and outdoor. It make you enjoy a safe and smart life. Features are as follows: (1) APP supports Apple and Android systems. (2) Bluetooth network configuration, faster and more stable! (3) There is no limit to the number of alarm hosts that can be bound to each smartphone; each user of the alarm host can log in through administrator or general member mode, of which the administrator is limited to one person and the number of general members is unlimited. (4) Can set 5 groups of SMS alarm numbers and 5 groups of phone alarm numbers. (5) Supports 99 wireless defense zones, 30 fire defense zones, 8 emergency call defense zones, 8 medical rescue defense zones, 4 water leakage defense zones, and can be equipped with 20 remote controllers or access control keypads (the remote controller can also be used for emergency alarm); 4 wireless sirens can be configured. (6) Scan the QR code to add wireless accessories to the host, accurate, convenient and fast. (7) The default setting includes seven languages and voice switching (Chinese, English, Russian, Spanish, French, German, Italian). (8) Two-way intercom function; (9) Timed arming, timed disarming and timed stay function (each timer can be set for three groups of time); (10) WIFI failure and telephone network failure prompt function; (11) Door and window open reminder function; (12) Detector low battery prompt function, detector offline prompt function (13) Supports delayed alarm function, delayed arming and delayed disarming function (0-99 seconds optional); (14) When the host alarms, the srien sounding time can be selected (0-254 seconds or always sounding); (15) In addition to the APP, you can also remotely control the arming and disarming of the host by SMS or dial buttons during a phone call; (16) The host has the function of staying on defense (only valid for intrusion defense zones 1-99); (17) Can record 10 seconds of alarm voice; (18) External power failure/recovery alarm function (optional to turn on or off); (19) Remote arm/disarm siren sound prompt function (optional to turn on or off); (20) Remote controller arm/disarm SMS reminder function (optional to turn on or off); (21) Door and window opening/closing reminder function in disarmed state (optional to turn on or off).
Product name RFID card Size 85.5X54X0.84mm/Customized Chip Frequency 125KHz/13.56MHz/860-960Mhz Crafts 4C offset print, Silk screen print, Inkjet print, Magnetic stripe, Signature, barcode, serial number print, Foil stamp, Encoding, Punch hole Surface finish Glossy, Matte, Frosted, Laminated Application Identification, Attendance System, Access control system, Membership management, Toll collect system Package 200pcs/box, 10boxes/carton, or can be customized Lead time 5~7 days Sample: Free
NE2-D11 single serial port server is used to realize the two-way transparent transmission of data from serial port to Ethernet port. It has a variety of Modbus gateway modes and MQTTC/HTTPC Internet of Things gateway modes,which can meet the networking functions of various serial port devices/PLC; Adopt industrial design standards to ensure the reliability of equipment.
The E103-W12 series is an ultra-low power WiFi module developed by Chengdu Ebyte Electronics Co., Ltd. based on the Dialog DA16200 SoC chip that supports IEEE 802.11b/g/n. It has a built-in high-performance ARM Cortex-M4 processor and works at 2.4~2.4835 GHz frequency band, the maximum wireless transmission power can reach 20dBm. The module supports IEEE802.11 b/g/n standard. The module supports AP and STA modes, supports multiple network transmission protocols such as TCP/UDP/HTTP/MQTT, and can maintain WIFI connection in low power consumption mode.
E106-915G27P2 comprises complete and cost efficient LoRaWan gateway module in the industry standard PCI Express Mini Card form factor, which enables an easy integration into an application board and it is also ideal for manufacturing of small series.
E78-470LN22S (6601) is a standard LoraWan node module designed and produced by Ebyte. It works in the frequency band CN470~510MHZ. It supports CLASS-A/CLASS-C node types and supports two network access methods: ABP/OTAA. At the same time, this module has It has multiple low-power consumption modes, and the external communication interface adopts standard UART. Users can access the standard LoraWan network through simple configuration through AT commands. It is an excellent choice for IoT applications.
E810-DTU (RS) is a high cost-effective RS232 to RS485/RS422 isolated interface bidirectional converter independently developed by Chengdu Ebyte Electronic Technology Co., Ltd. This product is featured by its small size, simple wiring, convenient installation, etc. It is a reliable assistant tool for engineering application, project debugging and product development.
1.Screen size: 21.5 inches (IPS display), resolution: 1920*1080 2.With 21.5 full fit digital screen, Bosto X7 gives you something priceless: space. So that you won't waste time searching for that reference image or opening and closing different programs on a secondary screen. And there'll be less zooming in and out too. Now you can save time and take control of your creativity, for a more efficient, controlled workspace. 3.Color: Features natural and vivid colors to meet the professional visual requirement for drawing,design or image editing,due to the 120% sRGB coverage of the screen color gamut.Whats more,it adopts IPS technology as a hard screen, and it has a wide viewing angle of 178�°with clear vision from vision from different angles and no color deviation,which let you enjoy the visual feast. 4.An exceptional drawing experience :The nib uses a special technology to truly restore the delicate friction between the nib and the screen,and with 16384 pressure level,it can accurately judge the strength of each stroke.In addition, An anti-glare screen effectively the disturbance and discomfort caused by strong light reflection,and simulate the feeling of painting on paper. 5.Multi finger touch: Move your fingertips slightly, rotate the canvas, zoomed in and zoomed out, present your creativity authentically 6.Convenience: It owns 8 user-defined shortcut keys(each side has 4 shortcut keys),so that users can say goodbye to the mouse and keyboard and then easily control the overall of the canvas;The body comes with a metal handle and supports pen magnetic storage,which make it more portable and easy to travel. 7.Comfort: With foldable and adjustable metal bracket, its easy to adjust to a comfortable angle, ergonomic design, it can tilt by 19�°after opening,and when not in use, it can be retrieved
1.Free and unrestrained with ease 2.Screen size: 18.5â??â??, full lamination screen 3.Resolution: 1920*1080, 5080LPI, delicate strokes, accurate pen tip positioning, smoth lines, no jagged image, high painting accuracy. 4.127% Srgb rich color gamut: the colors are rich, natural, and vivid, meeting the needs of professional painting, design, and other fields. 5.Pen pressure level: 16K, fast response, comfortable grip, delicate brushstrokes, no stuttering, closer to the real painting feel. 6.Strong magnet store the digital pen to avoid losing 7.With foldable metal bracket, support finger touch
1. Pen tablet and drawing tablet, screen size: 21.5 inches (IPS display), resolution: 1920*1080 2.Color: Features natural and vivid colors to meet the professional visual requirement for drawing,design or image editing,due to the 120% sRGB coverage of the screen color gamut.Whats more,it adopts IPS technology as a hard screen, and it has a wide viewing angle of 178°with clear vision from vision from different angles and no color deviation. 3.An exceptional drawing experience :The nib uses a special technology to truly restore the delicate friction between the nib and the screen,and with 16384 pressure level,it can accurately judge the strength of each stroke.In addition, An anti-glare screen effectively the disturbance and discomfort caused by strong light reflection,and simulate the feeling of painting on paper. 4.Multi finger touch: Move your fingertips slightly, rotate the canvas, zoomed in and zoomed out, present your creativity authentically. 5.Battery: With built-in large capacity battery, there is no need to connect power and no worry when going out. 6.Convenience: It owns 8 user-defined shortcut keys(each side has 4 shortcut keys),so that users can say goodbye to the mouse and keyboard and then easily control the overall of the canvas;The body comes with a metal handle and supports pen magnetic storage,which make it more portable and easy to travel. 7.Comfort: With foldable and adjustable metal bracket, its easy to adjust to a comfortable angle, ergonomic design, it can tilt by 19°after opening,and when not in use, it can be retrieved. 8.With 21.5 full fit digital screen, Bosto X7 gives you something priceless: space. So that you won't waste time searching for that reference image or opening and closing different programs on a secondary screen. And there'll be less zooming in and out too. Now you can save time and take control of your creativity, for a more efficient, controlled workspace.
