Specifications Travel range: +/-12.5mm Table size: 65x65mm Overall thickness:23mm Flatness:++10++m Pitch++30fs Yaw++20fs Weight : 5kg .
Axes adjustment : Xy axes Travel range (mm) : 13 Swing error : ++30+s Driver : micrometer Graduation(mm) : 0.01 Sensitivity(mm) : 0.001 Max. Load capacity (kg) : 7 Weight (kg) : 0.4.
Fusion splicer pt-630 Features Fiber core can be display clearly Singlex or y view and x & y view simultaneously Auto check quality of cleaved end face Auto select best splicing program 9 seconds splice time and 30 seconds heat time Small bulk and light weigh 5 inch color lcd monitor with clear digital image display Simple operation menu Software upgrade via usb interface Specification Model Pt-630 Applicable fibers Sm (itu-t g.652), mm (itu-t g.651), ds (itu-t g.653), nzds (itu-t g.655) Fiber cleaved length 12~16mmú¿coating diameterú¦250ª8mú¬ 16mmú¿coating diameter: 250 ~ 1000ª8mú¬ Fiber diameter Cladding diameterú¦80 ~150ª8m Coating diameterú¦100~ 1000ª8m Fiber count Single Fiber aligning method Core aligning Image processing method Digital Actual average splice loss 0.02db ú¿smú¬, 0.01db (mm), 0.04db (ds), 0.04db( nzds) Splicing time Typical 9 secú¼with standard sm fiber Splicing mode 53(templet), 40(user) Splice loss estimate More accurate Return loss ú+60db Storage of splice result 5000 resultsú¼3 parameter per result Fiber display and magnification 400xú¿x or y viewú¬, 200xú¿x and y viewú¬ Tube heating time Typical 30 sec Tube heating mode 9(templet), 24(user) Tube heating temperature Can be adjusted Applicable protection sleeve length 60mm, 40mm and a series of micro sleeves Tension test 2n Electrode life 2500 No.Of splice/heating with battery Typical 130 cycles (splice/tube heat) with inner li-battery Display screen 5 inch color lcd monitor Image change over The fiber image is turned upside down Terminals Rs 232 Operating condition 0 ~ 5000m above sea level, 0 ~ 95%rh and -10í½50íµ, respectively, max. Wind velocity of 15m/s Power supply Ac 100-240v with ac adapter; inner li-battery(6600mah) Dimensions 150mm(l) x150mm (w) x150mm (h) Weight 2.7 kg excluding battery, 3.2 kg including battery
Fusion splicer pt-650 Features Equel to fujikura fsm-50s, sumitomo type-37 etc Core to core alignment by pas technology ( pas:profile alignment system) Digital fusion splicer with automatic focus function Fiber core can be display clearly Single x or y view and x & y view simultaneously Auto detect cleaved endface fault Display fiber cleaved and offset angle Display core and clad offset 5.6 inch tft color lcd monitor with clear digital image display Usb & vga interface Software upgrade via usb interfac Specefication Model Pt-650 Applicable fibers Sm (itu-t g.652), mm (itu-t g.651), ds (itu-t g.653), nzds (itu-t g.655) Fiber cleaved length 12~16mmú¿coating diameterú¦250ª8mú¬ 16mmú¿coating diameter: 250 ~ 1000ª8mú¬ Fiber diameter Cladding diameterú¦80 ~150ª8m Coating diameterú¦100~ 1000ª8m Fiber count Single Fiber aligning method Core or clad aligning Image processing method Digital Actual average splice loss 0.02db ú¿smú¬, 0.01db (mm), 0.04db (ds), 0.04db( nzds) Splicing time Typical 9 secú¼with standard sm fiber Splicing mode 53(templet), 40(user) Splice loss estimate More accurate Return loss ú+60db Storage of splice result 4000 resultsú¼20 parameter per result Fiber display and magnification 300xú¿x or y viewú¬, 150xú¿x and y viewú¬ Tube heating time Typical 30 sec Tube heating mode 9(templet), 24(user) Tube heating temperature Can be adjusted Applicable protection sleeve length 60mm, 40mm and a series of micro sleeves Tension test 2n Electrode life 2500
Fusion splicer pt-660 Features Color lcd monitor and 256x magnification Compact and lightweight Reversible monitor with control panel on each side Maximum wind velocity: 15m/s 8sec splice time, 40sec tube-heat time Simultaneous x and y views Large capacity internal battery System test: ensures the best working condition User programmable Auto check fiber end face Auto calibrate parameters Store 8, 000 groups of splice results Multiple language options Specification Model Pt-660 Applicable fibers Sm (itu-t g.652), mm (itu-t g.651), ds (itu-t g.653), nzds (itu-t g.655) Fiber cleaved length 12~16mmú¿coating diameterú¦250ª8mú¬ 16mmú¿coating diameter: 250 ~ 1000ª8mú¬ Fiber diameter Cladding diameterú¦80 ~150ª8m Coating diameterú¦100~ 1000ª8m Fiber count Single Fiber aligning method Core or clad aligning Image processing method Digital Actual average splice loss 0.02db ú¿smú¬, 0.01db (mm), 0.04db (ds), 0.04db( nzds) Splicing time Typical 8 secú¼with standard sm fiber Splicing mode 53(templet), 40(user) Splice loss estimate More accurate Return loss ú+60db Storage of splice result 4000 resultsú¼20 parameter per result Fiber display and magnification 300xú¿x or y viewú¬, 150xú¿x and y viewú¬ Tube heating time Typical 30 sec Tube heating mode 8(templet), 24(user) Tube heating temperature Can be adjusted Applicable protection sleeve length 60mm, 40mm and a series of micro sleeves Tension test 2n Electrode life 2500 No.Of splice/heating with battery Typical 150 cycles (splice/tube heat) with inner li-battery Display screen 5 inch color lcd monitor Image change over The fiber image is turned upside down Terminals Usb 1.1 and vga Operating condition 0 ~ 5000m above sea level, 0 ~ 95%rh and -10í½50íµ, respectively, max. Wind velocity of 15m/s Power supply Ac 100-240v with ac adapter; inner li-battery(6600mah) Dimensions 170mm(l) x170mm (w) x140mm (h) Weight 2.7 kg excluding battery, 3.3 kg including battery
Prism Material: Flint glass, UV fused silica, Infrared fused silica, CaF2, Ge, ZnSe, Si etc. Dimension: 4mm-- 100mm Angle tolerance: 30" --3' Surface accuracy: ª-/10--1ª- Surface quality: 60/40 Clear Aperture: 90% Coating: custom design According to custom design to manufacture kinds of right angle prism, equilateral prism, dove prism, penta prism, roof prism from optical glasses. Standard lot
Standard lot
Optical calcite crystal (iceland spar) both in raw material and semi-finished form or finished form (such as polarizers, waveplates, etc.) ready to be used as per customer's dimension or detail technical specified. Typical products are rhombohedral shapes, rectangles and rounds, shaped plates, wedges, and cubes It is carefully selected to eliminate small inclusions, cleavage planes, cloud and mist, point defects and bubbles inside the crystal. It is known for its properties of transparency and double refraction, used chiefly in the manufacture of polarizing prisms, which are essential parts of polarization components and other special optical instruments.
There are two kinds of E-O modulations. One is longitudinal E-O modulation if the directions of electric field and light propagation are the same. The KDP isomorphic crystals are normally used in this scheme. If the directions of electric field and light propagation are perpendicular, it is called transverse E-O modulation. The LiNbO3, MgO:LiNbO3, BBO and KTP crystals are usually employed in this scheme. Our Capabilities: Dimension Tolerance: (Wí+0.1mm) x (Hí+0.1mm) x (L+0.1/-0.1mm) (L1 for 1064nm,TEM00, 10ns, 10HZ (polished only); >0.5 for 1064nm,TEM00, 10ns, 10HZ(AR-coated) ; >0.3 for 532nm,TEM00, 10ns, 10HZ(AR-coatd). Quality Warranty Period: one year under proper use.
A Pockels cell alters the polarization state of light passing through it when an applied voltage induces birefringence changes in an electro-optic crystal such as DKDP (KD*P) and BBO. When used in conjunction with polarizers, these cells can function as optical switches, or laser Q-switches. Frequently, Q-switches are employed in laser cavities for the purpose of shortening the output pulse, resulting in a light beam with enhanced peak intensity. In order to provide the device best suited to your purpose, we offer the DKDP (KD*P) series and LiNbO3 series Pockels cell. You can operate the cell with either a pull-up voltage or a pulldown voltage. Changing the polarity will only change the direction of the phase rotation. In other words, the pull-down voltage Q-switch use ª-/4-voltage pulses on the Pockels cell and the pull-up voltage Q-switch use ª-/2-voltage pulses on the Pockels cell. You should not, however, operate the cell with a constant applied voltage potential between the terminals, or a duty cycle greater than ~ 2%. Applications: OEM laser systems Medical/cosmetic lasers Versatile R&D laser platforms Military & aerospace laser systems Product Feature: 1). Industry-proven performance; 2). Dry; 3). Highest (99.8% KD*P) deuteration levels in industry; 4). Adhesive/Epoxy-free assembly; 5). Apertures from 8mm diameter up to 20mm diameter; 6). Lowest absorption in industry; 7). High-reliability; 8). Economical upgrade/rebuild program; 9). Highest optical damage thresholds; 10). Accessible technical support; 11). Standard performance documentation; 12). One-year limited warranty. 13). Operation up to 1kHz. Specification/Models: D-EO-Q-25.4-39-X-C Outline Dimension: ª¦25.4x39mm Aperture: ª¦10mm Single pass optical transmission:>98% Voltage (V ª-/4) @1064nm: 3.2KV Extinction Ratio: >1000:1 Single Pass Insertion Loss:2000:1 VCR: >1500:1 Transmitted Wave Front Distortion: ª- /10 Capacitance: 3pF Spectral Range of Operation:240-1400nm Damage Threshold: >1GW/cm2
Fujikura fsm-60s fusion splicer is a updation of fujikura fsm-50s fusion splicer, 60s machine sets the standard for core alignment fusion splicing by incorporating a user-friendly interface with enhanced features to provide the most rugged and reliable fusion splicer in the market today. The new rugged construction adds improved reliability by resisting shock, dust, and rain, and can withstand a 30" drop test. The fsm-60s splices a optical fibre in 9 seconds and heats a 60mm splice sleeve (heat shrinkable tube)in 30 seconds, for a total cycle time of only 39 seconds. New features, such as automatic tube heater operation, user-selectable clamping method (sheath clamp or fibre holder system), automated monitor tuolima image orientation, and battery charge capability during splicer operation provide the end user a productivity tool they can count on. Description: Fujikura fusion splicer, 4.1" color screen, standard accessories, including cleaver ct-30a. Multiple foreign languages menu is optional. Features: >>> core to core fiber alignment system pas environment (rain, dust, shock) resistant features >>> world's most compact and lightest of its class >>> arc calibration-free system >>> 4.1" tft color lcd monitor >>> dual-directional operating system >>> long life battery >>> fiber holder option >>> detachable work plate (attached to carrying case) Standard original fujikura packing
Fusion splicer of fitel S199M4, fitel S175V2000
Otdr of agilent e6000b, anritsu mw9076b, in stock.
Fusion splicer.
Modelú¦ electron eyepiece-a006 Detailed parametersú¦ Resolution: 1280(h)*1024(v) (1.30mp), or 2048(h)*1536(v)(3.00mp); Chip: 1/2" micron mt9m001; Magnification of optical system: 0.45x; Capturing micro-images and showing live video on pc screen; Saving still images as bmp, jpg files; Software for previewing, measuring, comparing, counting, saving and deleting; Tube mounts: ª¦23.2, ª¦30, ª¦30.5mmú+ Pc system required: Hardware: usb2.0 socket; cpu: intel p4; ems memory: 256m; hard plate: 512m; Software: win2000( with mend sp4); or winxp (with mend sp3); vista; directx 9.0
Modelú¦ LBH-2002DN Detailed parametersú¦ 45mm DIN Achromatic Objective: 4X,10X,40X(S),100X(S,Oil); Wide Field Plane-Scope Eyepiece: WF10X,Wf16X; Articulated Free Binocular Head, Interpupillary Distance:55-75mm, 30¿¼Inclined, 360¿¼Rotatable Built-in Digital Camera System, Resolution:1280(H) *1024(V),1/2Chip, USB2.0 with Micro-image Process Software Nosepiece: Backward Quadruple Nosepiece Double Layers Mechanical Stage:140X155mm,Moving Range X-Y: 70X50mm ¿¬2-¿¬30mm Iris Diaphragm And ¿¬32 Filter with ABBE Condenser:N.A. 1.25 Coaxial Coarse And Fine Focusing Adjustable Mechansim: 30mm, Precision:0.002mm Built-in Adjustable Brightness Halogen Lamp 6V/20W and Kohlar Illumination System
Modelú¦ lw91-06e-1 Detailed parametersú¦ 45mm din achromatic objectiveú¦4x, 10x, 40x(s), 100x(s, oil) Wide field plane-scope eyepieceú¦wf10xú+ Total magnificationú¦40x-1000x Monocular headú¼45¿¼ inclinedú¼360¿¼ rotatable Double layers mechanical stageú¦110x125mm, moving range x-yú¦60x20mm ¿¬2-¿¬30mm iris diaphragm and ¿¬32 filterú+ Abbe condenserú¦n.A. 1.25 Coaxial coarse and fine focusing adjustable mechanismú¦14mm Built-in incandescent lamp 20wú¿or halogen, or fluorescent, or ledú¬ Net weight/setú¦2.6kgú+ Packageú¦4 sets/carton54x39x40cmú+ Gross weight/cartonú¦13kg
Model lgx-2006b Detailed parameters 45mm din achromatic objective10x 100x (s, oil) Metallurgical plan-scope achromatic objective40x Wide field plane-scope eyepiecewf10xú¼wf12.5x Wide field plane-scope eyepiece with 0.1mm cross micrometerwf10x micro-ruler0.01mm/scale Total magnification100x-1250x Articulated free binocular headú¼interpupillary distance55-75mm 45 inclined double layers mechanical stageú¿200x180mm with two plates 10 and 20mm Moving range x-y70x50mm Coaxial coarse and fine focusing adjustable mechanism by rack and pinion with tension adjustment and stage height limited knobú+ Focusing range25mmú+ Precision0.002mm Built-in adjustable brightness halogen lamp 6v/20w and kohlar illumination system with blueú¼greenú¼yellow and ground glass filters Net weight/set 8kg Package1 set/carton 42x35x52cmú+ Gross weight/carton 10.5kg.
Modelú¦ LSZ-6CP Detailed parameters Objective Grouped From Any Three Objectives of 1X, 2X, 3X and 4X Working Distance 1X-55mm 2X-81mm 3X-61mm 4X-57mm Wide Field Plane-Scope Eyepiece WF10X WF15X Optional Articulated Free Binocular Headú¼Interpupillary Distanceú¦55-75mmú¼45¿¼ Inclinedú+ Illuminationú¦Top/ Bottom Lightú¦12V/10W Halogen Lampú¼ with ¿¬95mm Frosted Glass Stage Plate Rack and Pinion Coarse Focusing Mechanism With Slip Clutch and Tension Adjustment Net Weight/Set 2.4kg Packageú¦4 Sets/Carton61X35X36cm Gross Weight/Cartonú¦11kg
Waveplates (retardation plates or phase shifters) are made from materials which exhibit birefringence, we usually use quartz or quartz+bk7. There are several kinds of waveplates, multi-order waveplate, zero order waveplate, true zero order waveplate and dual wavelength waveplate. Our standard size is dia10mm, 12.7mm, 15mm, 20mm, 25.4mm and 30mm. Of course, other size and coating are available upon request. 1mm
