3k carbon fiber sheet, we have plain weave and twill weave. About the surface finish, we can produce glossy or matte. At present, we have 600*600mm, we also can customize the product according to your request. About thickness, it’s usually 0.3~20mm, but if you have other request, we also can manufacture it. MOQ is 10pcs, if you can order more, we can offer you a better price. All in all, the more quantity, the cheaper. If you have any questions, please don’t hesitate to contact us. We’ll try our best to serve you
Carbon fiber tube is made from 100% carbon fiber, many outstanding characteristics such as high toughness, high strength, flame resistant, heat resistant and light weight, it is widely-used in various fields. According to customer's request, we can supply customized carbon fiber tube.
Our factory has high precision cnc cutting machines, professional engineers.We have more than 10 cnc machines, drilling hole, cutting, counter sunk.Please offer us cad dxf or dwg file or real product for production. Carbon fiber cnc cutting parts application: 1. aerospace, rc model parts, helicopters, model drone , uavs; 2. decoration parts for car and jewelry; 3. manufacture fixtures and tooling; 4. industrial automation and robotics; 5. sports equipment; 6. musical instruments; 7. scientific apparatus; 8. medical device; 9. others.
1.Good tenacity; 2.High strength; 3.Light weight; 4.Strong toughness; 5.Nice looking;stylish; 6.Variety of colors for choice. 7.Fashion mix; 8.Sunshading; 9.Uv-blocking
Carbon fiber square tube description: 1.Pure carbon, high strength, light weight, nice surface; 2.Raw material :imported from taiwan tairyeil or japan toray's carbon fiber fabric; 3.Outside 3k +inside ud carbon.
Carbon fiber key case product description: 1.Real carbon fiber key holder, carbon fiber key bag; 2.Light weight, modern, high-tech look, noble; 3.Size of 100*55*20mm; 4.Suitable for all car keys.
Product description: 1.Weave :3k plain /twill in matte/glossy sureface , we can do 1k, 1.5k, 6k , 12k. 2.Lay up :both sides 3k +middle ud carbon. 3.Size: 400*500mm, can do 500*500mm, 500*600mm, 500*1200mm, 600*1000mm, 1000*1200mm. 3.Thickness: 0.2-60mm, 0.2-0.5-0.6-0.8-1.0-1.2-1.5-2.0-2.5-3.0-3.5-4.0-4.5-5-6----60mm. 4.Weight: 200g/sqm -360g/sqm. 5. Fiber count: 5*5/cm. 6.Color: black, silver, yellow, red , blue, some mix color 7.Material: 100% pure carbon fiber or carbon wth fiberglass or as per customer request
Anode fragments, also known as residual anodes, also known as carbon fines, residual anodes, anode carbon blocks, waste anodes, prebaked anode blocks, are shipped from large electrolytic aluminum factories and large carbon factories, with guaranteed quality, and are used for smelting copper, aluminum, lead, nickel and gold Special fuel for metals such as silver, it is also a raw material used in carbon factories and electrode paste factories. 1. The anode chips have high calorific value, the heat can reach 8000 kcal, the carbon content is more than 97%, and they are dry and moisture-free. 1 ton of anode chips is equivalent to the combustion value of 1.5 tons of metallurgical coke. 2. Anode fragments, total moisture: 0.8%, ash: 1%, volatile matter: 1%, total sulfur 1.6%, fixed carbon 98%, calorific value 8000 kcal. 3. The anode fragments can be reused in the anode material production process after cleaning. 4. The anode fragments are crushed and screened and divided into different particle sizes, including 1-3 cm blocks, 3-8 cm blocks, 8-20 cm blocks and hand-movable blocks above 20 cm, and whole anode fragments. It is added as an aggregate during the production and processing of anode carbon or electrode paste.
MCFeCr Cr: 60%min - 65%min, C: 1%, 2% max. LCFeCr Cr: 60%min - 65%min, C:0.25%, 0.5% max. LCFeCr Cr: 60%min - 75%min, C: 0.03%, 0.06%, 0.1% max.
We use the elaborately selected the low-ash and low-sulfur coal as raw material. Advanced grinding and remodeling are adopted to the process, to make sure the product has higher strength and activity. Besides, our unique steam and activization is utilized in the process, so that it have a high specific surface area and optimized pore size, which can absorb color molecules and odor-producing molecules in the solution.
High quality carbon anode scrap for sale: FC: 98%, Sulfur: 2.5%, Ash: 1%, VM: 1%, Moisture: 1%, Size: 10-30mm, 30-80mm, 60-90mm, 80-150mm, 100-200mm, 100-350mm, 200-400mm or as customer's requirements.
Function:Anti-slip, Anti-Static, acid-resistant, alkali-resistant Place of Origin:Guangdong, China Model Number:EGT01 Style:ESD Top PU Gloves Material:Polyester + carbon fiber + PU glue Size:S/ M/ L Color:Gray(Carbon fiber) Wrist:Hot melt or Overlock Knitting:13 gauge Feature:Anti-static Certification:other
Globular activated carbon of its body structure to contain at least one layer of spherical shell made of activated carbon material, spherical shell is spherical core body, can be made of different in spherical shell material of inorganic materials, spherical shell can be up to 10 mm in diameter. Change the traditional with binder forming old technology. Excluding adhesive composition and completely on carbon molecules between the affinity and the special properties of the material itself. Produced by scientific formula. Effectively avoid the pore structure plugging, pore developed products, powerful. In addition, because the fluid flow channel formed between globular activated carbon fluid mechanics performance is good, the fluid pressure drop through the activated carbon layer is small, so it is especially applicable to in activated carbon bed layer stack height of fixed bed gas processing plant. Globular activated carbon adsorption performance is divided into physical adsorption and chemical adsorption. Physical adsorption is caused by activated carbon is porous, so has the huge specific surface area, it has strong adsorption. Globular activated carbon surface can be as high as 500-1000 m2 / g, is conducive to give full play to the performance, the distributed capacitance is generally about 0.25 ~ 0.9 ml/g, BET specific surface area is about 500 ~ 2000 m2 / g.
Deep purification of drinking water,industrial sewage water;used for atomic facilities such as exhaust purification, division and refinig. Specification:Iodine value,800~1100mg/g,Moisture 5%,Hardness90%,PH6-8/9-11,ash15%,200mesh/8*16mesh/12*40mesh/1-3mm
The use of carburizer in casting can greatly increase the amount of scrap steel, reduce the amount of pig iron, or use no pig iron. The feeding method of furnace smelting should be put into the furnace with waste steel and other materials, and the small dosage can be added to the surface of the molten iron. However, it is important to avoid large quantities of iron and water in order to prevent excessive oxidative effects and insufficient carbon content of casting. The amount of carbon added is determined according to the ratio of other raw materials and carbon content. Different types of cast iron are selected according to the need to choose different types of carbon. The characteristics of the carburizing agent itself choose pure carbon graphitized material, reduce the impurities in pig iron, and the choice of carbon addition agent can reduce the production cost of the casting. In the process of smelting, the carbon content in the steel can be added to the molten steel, due to the improper loading or loading and the excessive amount of decarburization. The commonly used additive is carbon iron, electrode powder, petroleum coke powder, charcoal powder and coke powder. In converter smelting and high carbon steel, the use of petroleum coke with few impurities is used as a carbon extender. The requirement for the carbon dioxide of the converter steelmaking is high, the ash, volatile and sulfur, phosphorus, nitrogen and other impurities are low, and dry, clean, the particle size is moderate
Testing item Range Result Standard Iodine Absorption Number (g/kg) 82±5 80 GB3778-2011 Oil Absorption Number(10-5m3/kg) 102±5 99 GB3778-2011 Crushed OAN(COAN) (10-5m3/kg) 88�±5 91 GB3778-2011 Tint Test, Reflectance From ITRB 3# (%) 104�±8 100 GB3778-2011 NSA multipoint(103m2/kg) 78±5 81 GB3778-2011 STSA (103m2/kg) 75±5 72 GB3778-2011 Heating Loss/Moisture (%) 1.0 0.2 GB3778-2011 Ash Content (%) 0.5 0.2 GB3778-2011 500m Sieve Residue (mg/kg) 10 6.5 GB3778-2011 45m Sieve Residue (mg/kg) 500 332.0 GB3778-2011 Pour Density (kg/m3) 380±40 421.0 GB3778-2011 Stress at 300% Elongation (Mpa) -0.5±1.0 0.5 GB3778-2011 Fine Content(Jumbo Bag) (%) 7.0 4.3 GB3778-2011 Fine Content(Paper Bag) (%) 10 5.0 GB3778-2011
Activated carbon decription: Activated carbon is carbon with highly developed holes. It offers large specific surface area, strong absorbability and mechanical strength. Furthermore, it can resist acid, alkali and heat. It is not only used as an excellent adsorbent, but also as a catalyzer and catalyzer carrier. Widely used in industrial production, agriculture, environmental protection There are three kinds of materials activated carbon: Coal and wood and nut shell materials Coal-base activated carbon includes powdered grade, granular grade and columnar grade. Activated carbon application 1. Water purification and sewage treatment 2. As catalyst and catalyst carrier in chemical industry... 3. As catalyst and catalyst carrier in chemistry industry. 4. Refine and purification of various gases, precious metals refining and gas mask 5. For industrial tail gas purification, denitration, gas separation, PSA, air drying, 6. Food keeping fresh, gas mask, removing dioxin, accelerant carrier, home decoration, Package: 25kg into polywoven bag, PE lined. 50kg into poly woven bag, PE lined. 500kg or 1000kg into jumbo bag. (with pallets If required) Granular Coconut Activated Carbon for Gold Recovery Granular Coconut Activated Carbon for Gold Recovery Our Service: 1. Reply to your enquiry in 24 working hours; 2. Experienced staffs answer all your questions in fluent English; 3. Customised design is available. OEM are welcomed. 4. Exclusive and unique solution can be provided to our customer by our well-trained and professional engineers and staffs. Name/Specification Coconut shell activated carbon Apricot shell activated carbon Iodine adsorption value â?¥900mg/g â?¥900mg/g Benzene adsorption quality 400mg/g 400mg/g mechanical strength â?¥95% â?¥95% Filling density 0.4-0.5g/cm3 0.4-0.5g/cm3 Acetic acid adsorption quantity 500mg/g 500mg/g PH value 5-7.5 5-9 Acetic acid zinc adsorption 7mg/g 6mg/g Moisture â?¤5% â?¤5% minimum flow velocity 9-12.5m/s 9-12.5m/s Specific Surface area 900-1110m2 900-1110m2 Fire point 500°C 500°C Total hole volume 0.8cm3/g 0.8cm3/g
C9 hydrocarbon resin is made of C9 fraction,which is widely used in paint,adhesive,inks and rubber tyre. C9 hydrocarbon resin is fully compatible with nature rubber, various kinds of synthetic rubber, such as SBR,BR,CR,NBR,IIR and PE,PP,SIS,SEBS,EVA. Applications: a.Paint b.Rubber Compounding c.Adhesive d.Printing Ink
TA5100 is hydrocarbon resin which is suitable for hot-melting adhesives, (including quick packaging adhesives,book binding adhesives, wood adhesives and glue sticks, etc.) They have excellent compatibility with SIS, SBS ,EVA ,natural rubber and many kinds of synthetic rubbers . They provide enhanced performance in hot melt adhesive applications. Features of TA5100 in Hot Melt Adhesive and Pressure Sensitive Adhesives: Good open time / set time balance, Good adhesive ability Excellent aging stability Light color Applications: Hot melt adhesive, pressure sensitive adhesive
Cleaning carbon from intake ports and valves on turbo engines N54,N55 used walnut shell yellow The walnut shell powder is made from walnut broken shell, It is widely used for the surface cleanness. Mositure: 5%max Impurity content: 0.03%max Mesh size: 8-12mesh, 12-20mesh, 20-30mesh, 30-40mesh, 40-60mesh, 60-80mesh, 80-120mesh Colour: yellow Packing: double plastic bag or according to your requirement
