HZ601 Collection Programmable DC Standard Power Source is a high-level meter & power source integrated instrument which invested by Shenzhen Hangzhi, who gathering high-tech talents, adopting the unique electronic compensation linear sampling technology which ensure full range linearity of small signals (�µA & mV level) and super signals (50A & 1000V). Voltage and current could be output simultaneously and output DC power as well. Besides output, the input voltage (or current) can be measured simultaneously. It builds-in DC meter verification program to easy users.
High output stability: DC voltage, current output stability can reach 0.005% / min.
Wide output range: standard source output DC voltage range 0 mV-1100V
Standard source output DC current range: 0�µA-55A
Wide measurement range: measurement input DC voltage range 0mV-1100V
Measurement of the input DC current range: 0mA-55A
Support self-calibration: software self-calibration to the output input gear and does not need to open the case
Soft start: built-in soft start, preset load circuit,output from zero quickly rise to the set value, no impact on the load
Load protection: overload prompt, flow limit for about 4 seconds after the interception protection, to ensure the safety of the load
Human-PC Interaction: Large & colorful touch screen display and flexible setting to adjust the control source output parameters and easy to operate
Hangzhi DIT300-SG is a 300 Amp High Precision Digital Current Transducer with an accuracy of 200ppm (200 parts per million).
The multi-point zero-flux technology system applied in this high-precision DC transducer enables zero-flux closed loop control of excitation flux, DC flux and AC flux, and can detect high-frequency ripple by constructing a high-frequency ripple sensing channel, so that the transducer can achieve high gains and measuring accuracy over the full bandwidth.
Hangzhi AIT300-SG is a 300 Amp High Precision Current Transducer with an accuracy of 10ppm (ten parts per million.)
The multi-point zero-flux technology system applied in this high-precision DC transducer enables zero-flux closed loop control of excitation flux, DC flux and AC flux, and can detect high-frequency ripple by constructing a high-frequency ripple sensing channel, so that the transducer can achieve high gains and measuring accuracy over the full bandwidth.
RIT001 has a high gain and measurement accuracy in the full bandwidth range, due to the application of the
multi-point zero-flux technology system and high-frequency ripple sensing channel on top of currently existing
DC sensor technology.
Primary Nominal Current: DC0.01,
Overload Capacity: 200% for 1 minute,
Power Supply: DC14.2V to 15.8V,
Output Voltage: ±1V,
Accuracy: 1%,
Linearity: 0.2%,
Zero Offset Voltage: ±10mV,
Dynamic Response Time: 2ms,
Frequency bandwidth(-3dB): up to 100KHz,
Insulation Voltage (Between primary and secondary): 5KV,
Operation Temperature Range: -40 ~ 85.
HIT600 has a high gain and measurement accuracy in the full bandwidth range, due to the application of the
multi-point zero-flux technology system and high-frequency ripple sensing channel on top of currently existing
DC sensor technology.
IIT200 has a high gain and measurement accuracy in the full bandwidth range, due to the application of the
multi-point zero-flux technology system and high-frequency ripple sensing channel on top of currently existing
DC sensor technology.
Primary Nominal Current: DC200A, AC141A,
Overload Capacity: DC240A for 1 minute,
Power Supply: DC14.2V to 15.8V,
Ratio: 2000:1,
Secondary Burden Resistance: 10 ~ 25,
Accuracy: 0.02%,
Linearity: 20ppm,
Current Change Rate: 200A/us,
Frequency bandwidth(-3dB): up to 100KHz,
Insulation Voltage (Between primary and secondary): 5KV,
Operation Temperature Range: -40 ~ 85.
DIT600-SG high-precision digital current sensor products are a new generation of digital sensors developed and produced by Hangzhi. This product adopts brand-new software and hardware design, can measure single-phase AC and DC current and frequency at the same time. The high-precision digital current sensor provided by Hangzhi for the above equipment plays a key role in the measurement of current in its process control. The digitalized data output reduces the difficulty for customers to collect current signals and greatly reduced the cost of the customers.
AIT1500-10V has a high gain and measurement accuracy in the full bandwidth range, due totheapplicationof the multi-point zero-flux technology system and high-frequency ripple sensing channel ontopof currentlyexisting DC sensor technology.
Measuring range: ±1500A
Output signal: standard 0-10V voltage signal
Accuracy: 50ppm (Parts Per Million)
Linearity: max 20ppm;
Time stability: 0.5ppm/month;
Temperature stability: 0.5ppm/K;
Frequency Bandwidth (-3dB): 500kHz;
Dynamic response time: di/dt=1.5V/us.
JT-KL gas alarm Description
JT-KL gas alarm is a kind of wall-mounted household gas alarm designed to detect the concentration of combustible gas or vapors using high quality air-sensitive component and manufactured with advanced technology. It provides visual and audio signals when the gas concentration reaches the presetting alarm range, and reminds you taking prompt favorable action. You may start up other link equipment, open windows orshut off gas supply to avoid fire, explosion, suffocation, or other malignant accidents.
JT-KL gas alarm Features
Sensor lifespan7 years
High sensitivity and fast response
Easy installation
Compliance with EN50194-1:2009
JT-KL gas alarm Application
It provides visual and audio signals when the gas concentration reaches the presetting alarm range, and reminds you taking prompt favorable action. You may start up other link equipment, open windows orshut off gas supply to avoid fire, explosion, suffocation, or other malignant accidents.
JT-KL gas alarm Specifications
Model JT-KL
Working voltage AC220V+15% 50Hz
PowerConsumption 11.2W
Environment Temperature: -10 C 55 C, Humidity:
Specification of Gastec Gas Detection System Detector Tubes/gastec stain tube detectors 10
Tube No.: 10
Gas to be measured: Nitrogen oxide(NO)
Measuring Range: 2.5-200ppm
Shelf life: 3 years (after production)
We have more than 600 types of tube, for other tubes and specification details, please contact us .
Features of Gastec Short-term quick-measuring detector tubes
(1)On-site measurements can be performed easily by anybody, anytime and anywhere, in a short time
(2)Easy-to-check direct reading possible due to calibrated scale directly printed on the tube
(3)An extensive measuring range can be obtained by adjusting the sampling volume
(4)In order to assure high precision, each production lot is tested and calibrated independently, Each detector tube has its own quality control number printed on the tube
(5)Long shelf-life with excellent long-term stability
Product description of Gastec Short-term quick-measuring detector tubes
As a leading global brand in gas detection and measuring, GASTEC products are highly regarded in many industries and customers all over the world.
GASTEC gas detector tubes are thin glass tubes with calibration scales printed on them so you can directly read concentrations of the substances (gases and vapours) to be measured. Each tube contains a particulate matrix (e.g. silica gel, alumina) which binds carefully selected and highly stable detection reagents that are especially sensitive to the target substance in order to produce a distinct layer of colour change. The tubes are hermetically sealed at both ends.
Our Competitive Advantage
1.With 20 years exporting experience
2. Certificate: ISO, SGS, SEI
3. Price at least 5% Lower Than other competitors in China
4. Shipment: 10% Faster than other suppliers, For some ordinary Items, we have in stock and can send within 3 working days
5. Technology Support: According to customer's exact requirements, supply valuable solutions
6. Service: your inquiry can be replied within 24 hours during working days
Contact Material Brass
Insulator: Black Polyester UL94V-0
Standard: PBT+30%G.F
Current Rating 1.5Amps/contact max
Withstanding Voltage: 450V AC/minute
Plating Gold Plated/ Tin Plated
Contact Material Brass
Insulator: Black Polyester UL94V-0
Standard: PBT+30%G.F
Current Rating 1.5Amps/contact max
Withstanding Voltage: 450V AC/minute
Plating Gold Plated/ Tin Plated
Contact Material Brass
Insulator: Black Polyester UL94V-0
Standard: PBT+30%G.F
Current Rating 1.5Amps/contact max
Withstanding Voltage: 450V AC/minute
Plating Gold Plated/ Tin Plated
Contact Material Brass
Insulator: Black Polyester UL94V-0
Standard: PBT+30%G.F
Current Rating 1.5Amps/contact max
Withstanding Voltage: 450V AC/minute
Plating Gold Plated/ Tin Plated
Contact Material Brass
Insulator: Black Polyester UL94V-0
Standard: PBT+30%G.F
Current Rating 1.5Amps/contact max
Withstanding Voltage: 450V AC/minute
Plating Gold Plated/ Tin Plated
Contact Material Brass
Insulator: Black Polyester UL94V-0
Standard: PBT+30%G.F
Current Rating 1.5Amps/contact max
Withstanding Voltage: 450V AC/minute
Plating Gold Plated/ Tin Plated
Product Introduction
The wet gas flowmeter is a volumetric gas flowmeter. Its measurement range ranges from 0.016L/min for small flow to 200L/min for large flow. It has high accuracy, no leakage, and good stability. It is suitable for gas volume or flow measurement in laboratories, research institutions, environmental measurement, production sites, etc. It can also be used as a transmission standard and working standard, and is widely used in gas appliances, energy, chemical industry, environment, medicine, calibration and other industries. The products have been exported to Europe, America, Asia and other countries and regions.
Ã?Â
Product Features
1. Extra-wide flow range 1:300
2. Repeatability better than 0.1%
3. Intelligent correction (Volume and flow rate automatic correction)
4. Various automatic measurement methods (constant volume output, timing output, and fixed whole revolution output)
5. Full digital flow meters (Temperature, Pressure, Volume, High-precision measurement of flow, RS485 Bus Communication)
6. Intelligent wire control start and stop
7. Each is strictly calibrated with � 0.05-stage active piston prover to ensure accuracy
8.� No leakage (using advanced magnetically coupled transmission technology, non-oil seal)
Ã?Â
Precision (Repeatability)
Standard Flow Range: �± 0.1% (Standard deviation)
Entire Flow Range: �± 0.15% (Standard deviation)
Ã?Â
Material (Anti-corrosion)
304 stainless steel
316 stainless steel (customized)
Temperature measurement: 0-50
Pressure measurement: 0-10kPa
