Find Verified Ores Minerals Suppliers, Manufacturers and Wholesalers

Calcined bauxite has traditionally been the most commonly used aggregate material used for High Friction Surfacing.The inherent nature of Calcined Bauxite resists shear stresses that lead to polishing of the road surface. Its hardness is also beneficial in internal and external industrial flooring applications where a very hard and long lasting mineral is required to give high-friction, anti-slip performance.Calcined Bauxite has been found to exhibit characteristics far superior to alternative road surface aggregates.

Calcined bauxite is one of the principal ore of aluminum. Calcined bauxite contains hydrous aluminum oxides and aluminum hydroxides, formed through the laterization of aluminous rocks in tropical and subtropical areas .Calcined bauxite is obtained by calcining (heating)superior grade bauxite at high temperature (from 85oc to 1600c) .This removes moisture thereby increasing the alumina content. Compared to an alumina content of about 57%to 58%in raw bauxite, calcined bauxite has an alumina content of 84%to88%.The heating is carried out in rotary kilns.

Calcined bauxite is one of the principal ore of aluminum. Calcined bauxite contains hydrous aluminum oxides and aluminum hydroxides, formed through the laterization of aluminous rocks in tropical and subtropical areas .calcined bauxite is obtained by calcining (heating)superior grade bauxite at high temperature (from 85OC to 1600C) .this removes moisture there by increasing the alumina content. compared to an alumina content of about 57%to 58%in raw bauxite, calcined bauxite has an alumina content of 84%to88%.the heating is carried out in rotary kilns.

model Al2O3 Fe2O3 TiO2 Bulk densit g per cm3
bauxite clinker 80 90 1 point 2 2 point 5 2 point 5 3 point 8 3 point 0 till 3 point 3
Calcined bauxite bulk density through artificial selection processing and crushing magnetic separation procedures Bauxite aggregate also called refractory aggregate high grade called high alumina aggregate content is generally 55percent till 88percent
High alumina refractory castable aggregate is indispensable raw materials And alumina cement fine powder mixed with water in proportion to generate very high strength refractory concrete I produced the high alumina aggregate is the choice of high grade aluminum cortical stone the rotary kiln calcination Having dense large easy construction etc to solve the current high aluminum aggregate materials commonly used body loose powder produced concrete porosity low refractoriness shortcomings of similar products in the boutique High alumina refractory aggregate refractory concrete casting and other fields is widely used

1, aluminium industry.Used for defense, aerospace, automotive, electrical, chemical industry, daily necessities, etc.

2, the precision casting.Alumina clinker made after mold precision casting processed into fine powder.Used in military industry, aerospace, communications, instrumentation, machinery and medical equipment department.

3, used for refractory products.High bauxite clinker as high as 1780 refractoriness, chemical stability strong, and good physical properties.

4, aluminum silicate refractory fiber.With light weight, high temperature resistance, good thermal stability, low thermal conductivity, heat capacity is small and the advantages of resistance to mechanical shock.Used in iron and steel, nonferrous metallurgy, oil, chemical space of atomic energy, defense and other industries.

5, magnesia and bauxite clinker as raw material, adding proper binder, used for pouring ladle whole ladle lining has particularly good effects.

6, manufacture alumina cement, abrasive materials, ceramic industry and the various compounds can be aluminum.

Bauxite is one such sedimentary rock which is widely used for the manufacturing of aluminium by various industries such as the chemical industry, refractory, abrasive, cement, steel, and petrol industry amongst others. In chemical, bauxite along with alumina is used in the manufacturing of aluminium chemicals. In refractory, it is used as a raw material for making several products.

Bauxite is one such sedimentary rock which is widely used for the manufacturing of aluminium by various industries such as the chemical industry, refractory, abrasive, cement, steel, and petrol industry amongst others. In chemical, bauxite along with alumina is used in the manufacturing of aluminium chemicals. In refractory, it is used as a raw material for making several products.

Al2O3--92.06; Fe2O3--1.14; TiO2--3.86; SiO2--2.04; K2O---0.16; Na2O---0.022
CaO---0.074; MgO--0.055; AP--5.02; BD----3.68g/cm3

Rotary kiln calcined bauxite is obtained by calcining superior grade bauxite at high temperatures (from 850 to 1600) in the rotary kiln. This removes moisture thereby increasing the alumina content. Compared to an alumina content of about 57% to 58% in raw bauxite, calcined bauxite has an alumina content of 84% to 88%. Besides, through calcination, the density and refractory resistance will also be improved to varying degrees. The grade of bauxite can be increased greatly.

As we all know, China is the world's leading supplier of bauxite, producing over three million tons per year for refractory, abrasive, and welding applications. Calcined bauxite is made of excellent bauxite ores, fired in a kiln to impart its superior abrasive qualities, hardness, and long-term frictional resistance. This materials are in stable index, homogeneous structure and excellent high-temperature performance. Its high alumina and low iron make calcined bauxite be the ideal raw material in refractory and abrasive products.

Welding grade bauxite
Welding grade bauxite has tight regulation on presence of sulfur and phosphorus which are detrimental to the weld. When present at high concentrations, they induce porosity and cracking, and at lower concentrations, they adversely affect the impact strength of the weld. And moisture for welding grade bauxite should not exceed 0.5% because the potential for any moisture present withthin the flux to reduce to hydrogent, if exposed to a welding arc, the molten weld pool absorbs the hydrogen and will induce brittleness into the weld.

Application
Welding fluxes are a small but valuable market for calcined bauxite. Techniques for submerged arc welding require the use of a granular flux to shield the molten weld pool rom the atmosphere during the weldâ??s application or pacement. Various proprietary compositions exist and in some cases calcined bauxite is incorportated into these formulations. Calcined bauxite may, in some instances, make up to 25% of the welding flux.

Specification for snw83 calcined bauxite

Chemical analysis
Al2o3: min 83%
Fe2o3: max 2.0%
Sio2: max 9.0%
K2o: max 0.3%
S: max 0.02%
P: max 0.05%


Available grain size
250mesh; 325mesh; 600mesh; 800mesh; 1000mesh; 2500mesh; or as customer's requirement.


Package
1mt jumbo bag
Standard exporting package for sea transportation or air delivery
Special packing requirement is acceptable.