A Color male to female plug audio cable B RCA male to Canon Female
A RCA male to Canon Female B RCA to RCA Male
A RCA to RCA Male B Without the
Fiber Optic Splice Sleeve was developed to protect and strengthen fusion splices on fiber optic cables. The Fiber Optic Splice Sleeve intends to protect (mechanically) fiber optic splices. The Fiber Optic Splice Sleeve is built from shrinkable plastic tube with metal cylinder inside. The fibers are inserted before splicing into the plastic tube. After making the splice, the shrinkable tube is heated and shrunk on the splice. It can protect the spliced fiber from being break down and unwanted bending and is coated with the plastic tube. It gives to the installer flexibility while using the spliced fibers during installation
The yttrium orthovanadate (YVO4) is a positive uniaxial crystal grown with Czochralski method. It has good mechanical and physical properties and is ideal for optical polarizing components because of its wide transparency range and large birefringence. Photonchina YVO4 has an excellent synthetic substitute for Calcite (CaCO3) and Rutile (TiO2) crystals in many applications including fiber optic isolators and circulators, beam displacers, Glan polarizers and other polarizing optics, etc. Applications of YVO4ï¼? YVO4 crystal produced by Photonchina is mainly used to manufacture Birefringent Wedge of optical isolator and Beam Displacer (BD) of optical circulator and optical beam splitter. YVO4 Wedges or Prisms are also called YVO4 Plates or Blocks. 1. YVO4 Wedge, key components of optical isolator. 2.YVO4 BD, Beam Displacer, used in fiber circulator
Fiber optic Faraday rotator mirror is a fiber optic device that can serve as both the reference mirror and the probing mirror. The device functions as a phase conjugate mirror by creating a phase delay of 90 degrees. This feature allows the mirror and the return path of the beam to automatically compensate for any induced birefringence the beam experiences during the first of leg of the travel. Therefore, the Faraday rotator mirror is an important part of the fiber optic Michelson Interferometer. The Faraday rotator mirror has been used widely to compensate for induced phase changes in many other waveguide applications. Faraday Rotator Mirrors are available pigtailed with 1 m of standard Corning SMF-28e+ single mode fiber. The fiber is mounted in a standard �?900 µm tight tube buffer with proper strain relief, and an optional 2.0 mm narrow key FC/PC or FC/APC connector is available. The Faraday Rotation Mirror is built with ALL-glass technique sealed process, it performs wide working wavelength range so that fit for various wavelength , it can rotate the input signal polarization state for 90°or 180° after reflect back ,widely used in sensor system.
Polarization maintaining (PM) patch cord / jumper leads are built with polarization maintaining panda fiber and connectorise using FC/UPC, FC/APC, SC/UPC, SC/APC and LC connectors. FC connectors can be supplied with wide key (2.14mm, N type) or narrow key (2.02mm, R key) width. Patchcords can be supplied in 250um bare fiber, 900um buffered fiber or 3mm cable. PMP features low insertion loss, high extinction ratio and high return loss. The slow or fast axis can be aligned to the connector key.
This is a cylindrical couplerdesign, even split, 900um loose tube fiber, connectorized, which is customized and hot sale in US market for years. Our Advantages: Faster Delivery Time: Normal items stock up enough 3-7 working days lead time First-class after sale service: on call 24 hours Temporary treatment in 72 hours Long-term measure feedback with in 7 days Assurance of reliability: Periodic reliability testing Continuous quality improvement.
Fiber optic attenuators are devices which reduce (attenuate) the strength of a fiber optic signal within a fiber optic network. Attenuators are usually used when the signal arriving at the receiver is too strong and hence may overpower the receiving elements parameter SC, FC, ST, LC, MU, ST End-face APC/UPC/PC Mode Single mode & multi mode Sleeve Zirconia ceramic, phosphor bronze Insertion loss (dB) 0.2 Exchangeability (dB) 0.2 (connect randomly) Tensile strength (dB) 0.2 (0~100N) Vibration (dB) 0.2(5~50Hz, 1.5mm amplitude) Temp. Range (dB) 0.2(-40~80, 21 cycles)
SM 1510nm PLC 1*16 Fiber Optical Splitter Micro Type SM 1510nm PLC 1*16 Fiber Optical Splitter Micro TypeDescription: A fiber-optic splitter, also known as a beam splitter, is based on a quartz substrate of an integrated waveguide optical power distribution device, similar to a coaxial cable transmission system. SM 1510nm PLC 1*16 Fiber Optical Splitter Micro Type Product Feature: 1. Low insertion loss 2. High return loss 3. Telcordia GR-1209 and GR-1221 compliance 4. YD/T 2000.1-2009 compliance SM 1510nm PLC 1*16 Fiber Optical Splitter Micro Type Application: 1. FTTx, FTTH,FTTF,FTTB, 2. PON networks, BPON, EPON, GPON 3. CATV, CCTV 4. Data communication SM 1510nm PLC 1*16 Fiber Optical Splitter Micro Type Product Specification: Line Width: 20mm Wavelength: 650nm Optical Path: Inner Optical System Operation Material: Solid State Incentive mode: Light pump type Opticombine was founded in 2011, owned by SI CHUAN GUANGFA TECHNOLOGY CO., LTD. Opticombine is a manufacturer and full-line distributor of communication fiber opticï¼?connectors, fiber optic consumable products, active & passive network equipment and components. It serves customers from all segments of the fiber optics industry including telecommunications, contractors, resellers/distributors, researchers, government, education, cable TV operations, and telephone R&D facilities. We're committed to delivering an exceptional customer experience by consistently applying the principles of trust, partnership, expertise, and a proven reputation knowing that our employees are the key to our success.CC:
Optic fiber clamp for fiber cable, power cable, double type 6 holes Optic fiber clamp for fiber cable, power cable, double type 6 holes Model: TEL-OFC-003 Description: Combined cable clamp for fiber optical cable(FO) and power cable(DC) Telsto optic fiber clamps are used to fix power cable and fiber optical cable at the same time. Itâ??s available for power cable: 10-14mm, Optic fiber cable: 6.8mm. It can fix three fiber cables and three power cables at most. The C-shape bracket and pressing board are compact and terse. It is simple to fix the cables reliably. Features/Benefits l Customized products l High quality materials l Total fastening Optic fiber clamp for fiber cable, power cable, double type 6 holes
Armored patchcord is no need to use the protect conduct , it is convenient for the network operation and maintenance. LC.SC, ST, FC , E2000...connectors optional. Low insertion loss, high return loss. Simplex,duplex, multicore optional. Cable length customized
Fiber optic patchcord, SC, LC, ST, FC, E2000, MU, MTRJ connector and so on. Our patchcord is low insertion loss, high return loss. Any length can optional. Singlemode or multimode optional. Simplex or duplex optional. Cable color can be customized.
4/12/24/48core ADSS (All dielectric Self-supporting Aerial fiber optic cable . ADSS cable is loose tube stranded, 250um fibers are positioned into a loose tube made of high modulus plastics. The tubes are filled with a water-resistant filling compound. The tubes (and fillers) are stranded around a FRP as a non-metallic central strength member into a compact and circular cable core. After the cable core is filled with filling compound. it is covered with thin PE inner sheath. After stranded layer of aramid yarns are applied over the inner sheath as strength member, the cable is completed with PE or AT outer sheath.
4/12/24/48core ADSS (All dielectric Self-supporting Aerial fiber optic cable . ADSS cable is loose tube stranded, 250um fibers are positioned into a loose tube made of high modulus plastics. The tubes are filled with a water-resistant filling compound. The tubes (and fillers) are stranded around a FRP as a non-metallic central strength member into a compact and circular cable core. After the cable core is filled with filling compound. it is covered with thin PE inner sheath. After stranded layer of aramid yarns are applied over the inner sheath as strength member, the cable is completed with PE or AT outer sheath.
Assembly: Senko 2mm/3mm MPO PLUS MINI HOUSING w/SHORT BOOT OD NOMINAL GENDER AND POLARITY CHANGEABLE. 100% tested for low insertion loss performance and high return loss. Fast delivery and quick response on after-sales service.
Key Features: Low excess loss Various Coupling Ratio Compact Size High Stability and Reliability Mini sizes Applications: Long-haul Telecommunications CATV FTTH Local Area Network
DWDM multi-channel multiplexer /demultiplexer (Mux /DeMux)modules are available on ITU channel spacing of 200GHz. They demonstrate low loss, temperature insensitivity and reliable performance in any system application.Mux/DeMux modules offer low-cost wavelength management solutions that are suitable for long haul, metro, and access application. Features: 1) Standard size, light weight and reasonable structure 2) Splice tray inside changeable 3) 19-inch standard size, light in weight and robust structure 4) Suitable for ribbon and single fiber 5) Various panel plate to fit different adapter interface 6) Front mark on the plate is easy for identification and operation 7) 24C, 36C, 48C, 96C,144C optional, with or without fiber optic pigtails and adapters 8) Easy for management and operatio
Fiber optic patch cord ,Precise connector, Customized length, Excellent mechanical capability, insertion loss
Features Factory-terminated provide consistent quality, high performance and reduce installation time 100% tested for low insertion loss performance and high return loss MPO female to 4 x LC duplex harness cable Save Time & Space OM4 (OM3) 50/125 m Fiber Optimized performance available in elite MTP and discrete premium connector LSZH Jacket by Default
