Main Parameter: Model: TR10.0-20KW Rated Power: 20KW Max Power: 25KW Generator: Three Phase Permanent Magnet Alternator Rated Output Voltage: 360V Start Wind Speed: 2m/s Rated Wind Speed: 12m/s Maximum Wind Speed: 45m/s Rotor Diameter: 10.0m Rated Rotor Speed: 90r/m Blade Number: 3 Blade Material: Reinforced fiber glass Blade Pitch Control: None, Fixed Pitch Overspend Protection: Auto programmed control Gearbox: None, Direct Drive Temperature Range: -40 to +70 Deg. C Tower Type: Wire Guyed or Free Standing Tower Height: 18m or higher
Main Parameter: Model: TR8.0-10KW Rated Power: 10KW Max Power: 12KW Generator: Three Phase Permanent Magnet Alternator Rated Output Voltage: 240V Start Wind Speed: 2m/s Rated Wind Speed: 10m/s Maximum Wind Speed: 45m/s Rotor Diameter: 8.0m Rated Rotor Speed: 180r/m Blade Number: 3 Blade Material: Reinforced fiber glass Blade Pitch Control: None, Fixed Pitch Overspend Protection: Auto programmed control Gearbox: None, Direct Drive Temperature Range: -40 to +70 Deg. C Tower Type: Wire Guyed or Free Standing Tower Height: 12m,18m or higher
Main Parameter: Model: TR6.4-5000W Rated Power: 5000W Max Power: 6000W Generator: Three Phase Permanent Magnet Alternator Rated Output Voltage: 240V Start Wind Speed: 2m/s Rated Wind Speed: 10m/s Maximum Wind Speed: 45m/s Rotor Diameter: 6.4m Rated Rotor Speed: 200r/m Blade Number: 3 Blade Material: Reinforced fiber glass Blade Pitch Control: None, Fixed Pitch Overspend Protection: Auto programmed control Gearbox: None, Direct Drive Temperature Range: -40 to +70 Deg. C Tower Type: Wire Guyed or Free Standing Tower Height: 12m,18m or higher
Main Parameter: Model: TR3.2-1000W Rated Power: 1000W Max Power: 1500W Generator: Three Phase Permanent Magnet Alternator Rated Output Voltage: 48V Start Wind Speed: 2m/s Rated Wind Speed: 8m/s Maximum Wind Speed: 35m/s Rotor Diameter: 3.2m Rated Rotor Speed: 400r/m Blade Number: 3 Blade Material: Reinforced fiber glass Blade Pitch Control: None, Fixed Pitch Overspend Protection: Auto programmed control Gearbox: None, Direct Drive Temperature Range: -40 to +70 Deg. C Tower Type: Wire Guyed or Free Standing Tower Height: 6m ,9m or 12m
Wind turbine, wind and solar hybrid generator system.
Wind & solar hybrid energy system, wind turbine and generator, off-grid controller and inverter, wind and solar hybrid street lamp.
Small wind turbine generator from 300w to 20kw and inverters.
MaximMAGNET makes quality Strong neodymium magnet block magnet for different kinds of applications, we aim to build a reliable brand name in magnetic industry. Detailed specifications: 1.Size: Custom-made as per drawings/requirements; 2.Grade: 11.7-14.8kGs magnetic residual; 3.Performance: consistent magnetic flux, high coercive force, low temperature coefficient and low irreversible magnetic losses. 4.Coatings: Ni, Zn, NiCuNi, Epoxy, Nicu+Epoxy, NiCu+Sn, Passivation, Silver, Gold, Teflon, Everlube etc. 5.Applications: Motor assemblies, Automobile, Wind turbine/Generator, MRI, Speaker, IT industry, Sensor, Communication equipments, Scanner, Camera, Home appliance and so on.
We produce and sell ndfeb magnet in various shapes(segment, block, cube, cylinder, disc, ring, rod, sphere, etc)with different grade Rare earth magnet: 1. Material: neodymium, ndfeb 2. Technology: utilizes new sintered ndfeb magnet techniques and equipment such as strip casting, hddr technology 3. Magnetic properties: high coercive force, the max operation temp is up to 200 degree centigrade or 380 curie temperature 4. Grades: n33-n52, 33m-48m, 33h-48h, 30sh-45sh, 30uh-38uh and 30eh-35eh 5. Shapes and sizes: various kinds or according to customers' request 6. Coatings: ni, zn, phosphating, epoxy and so on 7. Motor magnet applications: widely used in different applications, such as sensors, motors, rotors, wind turbines/wind generators, loudspeakers, magnetic hooks, magnetic holder, filters automobiles and so on. With insulation packing with metal sheet .
1) standard: din, ansi/asme, bs, non-standard 2) diameter: 2-42mm 3) material: carbon steel 4) grade:4.8, 6.8, 8.8 5) finish:zinc plated, nickel plated, hot dipped galvanized, black 6) packing:in carton/sack and palletized, generally 25kg per unit Packing:in carton/sack and palletized, generally 25kg per unit
Dry wall screw 1) standard: din, /asme, bs, non-standard 2) diameter: 2-10mm 3) length: 10-100mm 4) material: carbon steel 5) grade:4.8, 6.8, 8.8 6) finish:zinc plated, nickel plated, hot dipped galvanized, black 7) packing:into carton/sack and palletized generally 25kg per unit Packing:into carton/sack and palletized generally 25kg per unit
MaximMAGNET makes quality Super strong rare earth permanent magnetic disc for different kinds of applications, we aim to build a reliable brand name in magnetic industry. Detailed specifications: 1.Size: Custom-made as per drawings/requirements; 2.Grade: 11.7-14.8kGs magnetic residual; 3.Performance: consistent magnetic flux, high coercive force, low temperature coefficient and low irreversible magnetic losses. 4.Coatings: Ni, Zn, NiCuNi, Epoxy, Nicu+Epoxy, NiCu+Sn, Passivation, Silver, Gold, Teflon, Everlube etc. 5.Applications: Motor assemblies, Automobile, Wind turbine/Generator, MRI, Speaker, IT industry, Sensor, Communication equipments, Scanner, Camera, Home appliance and so on. Why buy MaximMAGNET? 1. Ningo origin manufacturer; 2. Magnetic property custom made is available; 3. Low weight loss: less than HAST-5mg/cm3 4. Dy-free/less Dy content; 5. Competitive price; 6. Good thermal stability and magnetic flux consistency; 7. Good english speaking staff, offering fast and good service.
ASN2-24 air-insulated metal-clad enclosed switchgear is a necessary power distribution equipment in 24kV 3-phase AC50/60Hz power system. It is used in power generator, substation, factory and high building as a equipment of receiving and distributing electrical power. Also it is used to control, protect and monitor the circuit. The switchgear accords with the standard of GB3906, DL/T404 and so on. 1. Busbar is covered with shrinkable insulated material or disposed with epoxy, which make the electrode improved and the body of the switchgear compact. 2. The frame of switchgear is made of top quality aluminum-clad zinc plate through rivets and has characteristic of higher strength, rapider assembled efficiency and more artistic appearance. 3. According to functions the trolley can be divided into circuit breaker trolley, voltage transformer trolley, metering trolley, isolation trolley. The same kind trolleys can be exchanged freely. 4. Can be fitted with VN2 series center located high voltage AC vacuum circuit breaker. 5. There are clapboards between function compartments and individual pressure relief passage. 6. The instrument board is with applicable inclined angle so the operation and observation are more convenient. 7. The instrument compartment is a knock-down module, which not only improve the prettiness and safety of secondary wires but also make the maintenance and overhauling more convenient.
Reinforced (non-)asbestos beater sheet Got-633 is made of 633-1 non-asbestos beater sheet inner lined with metal truss plate (generally the carbon steel with 0.2~0.25mm thickness). It is extensively applied in manufacturing various automobile and motor gaskets. It is an ideal material that will substitute the traditional asbestos gaskets. The product has excellent performance in self expansion, high resilience and long lifespan, etc. Mainly applied in automobile farming machine, motorcycle and engineering etc., it is also can be used in high strength gaskets and cylinder gaskets etc. Product structure: Got-633 truss plate reinforced asbestos beater sheet If stored for a long time, the asbestos will have certain corrosion to the inner lined metal.
Kammprofile gasket Got kammprofile gasket , generally processed to be concentric groove in the two faces of the stainless steel flat gasket by precise lathes. According to the different medium, w can choose flexible graphite, ptfe, non-asbestos, or other soft metal, to sick to the two faces of the gasket. It can directly be used without sealing layer, and the effect is good. But under the high pressure occasion, it will be easy to do damage to the surface of the flange. 410 basic type kammprofile gasket 410l kammprofile gasket with outer ring (integral type) 410lm kammprofile gasket with outer ring (split type) Model 410lm split type metal toothed gasket with outer ring, can choose richer metal, e.G. Carbon steel, as the outer ring, and the outer ring thickness can be 1.5mm, more flexible and economic than the integral type 410l, and the lining metal can be repeatedly used. Product application: Got toothed combination gasket is the first choice gasket under relatively low preload power, the soft surface of the sealing layer can avoid the direct touch between metal and metal, which is combined reliably and compactly, to protect the metal flange from damaged, even under extremely high load. The toothed combination gasket is especially suitable for the flange connection in thermal exchanger, container, and reaction vessel under high temperature, high pressure, and the working condition altering occasions. It is an ideal substitution for traditional metal jacketed gasket. Operating pressure range: 6.4~25mpa Overlaying material: Flexible graphite, asbestos plate, non-asbestos plate; Ptfe, mica plate, lead, etc. Generally the thickness of the dual overlaying is 0.5mm
Silicone rubber is a new polymer elastomer which has heat and ageing , high insulation , excellent resistent weather . With glass fiber fabric composition complex, is a kind of high performance, multifunction new material, join the environmentally friendly flame retardant .Silicone rubber has excellent properties such as flame retardant, low smoke, non-toxic. Silicone rubber coated glass fiber cloth, by its unique high temperature resistance, excellent weather resistance, aging resistance, and possesses the characteristics of softness and toughness and has been widely used in aerospace, chemical industry, large power generation equipment, thermal insulation, fire prevention, and other fields, is a kind of environmentally friendly products. Reserve in the environment when the temperature between 0 and 40c, the humidity is bigger than 75% . Far away from the heat source. Avoids with the acid and alkali and to the rubber harmful special material contact. In the transportation, prevents the extrusion. The color of the products:red. Silver gray and black. Can according to the customer specific request to production. Silicone rubber of one side or both sides is provided . Standard carton box
Petrov is an old purchaser of Hydrosila Group in Russia. He cooperates with AAK on some non-standard hydraulic pilot operated relief valves and often discusses some difficulties and complications of hydraulic pilot operated relief valves. In the second half of last year, they needed to purchase a hydraulic pilot operated relief valve to test an agricultural machinery equipment. Due to urgent time, Petrov purchased from a Russian hydraulic relief valve manufacturer, who delivered 30 hydraulic pilot operated relief valves in 30 days. During the test run, the hydraulic pilot operated relief valves screamed at about 1.5MPa before opening, as well as at the start and stop. Petrov contacted the manufacturer of the hydraulic relief valves, and the manufacturer replied that the non-standard customization was completely based on the drawings provided, and the dimensional accuracy also met the requirements. Their engineers independently tested the hydraulic relief valves and found that there was really no abnormality. The boss was dissatisfied with the one week of delay due to the test run and asked Petrov to repurchase the hydraulic pilot operated relief valves. Because the hydraulic relief valve problems encountered before were solved by AAK, Petrov emailed me again. AAK engineer preliminarily judged that there may be problems in the design of the hydraulic pilot operated relief valve according to his fault description, the drawings of the pilot operated relief valve, the working parameters of the hydraulic system of agricultural machinery, and the video of the test machine. Knowing that he still has one month of flexibility, AAK can modify the original design of the hydraulic pilot operated relief valve and send 12 samples within 30 days. Four weeks later, AAK sent 20 samples of hydraulic pilot operated relief valves, which were installed and debugged without screaming, and the hydraulic power unit was started or closed for many times still without screaming. Petrov was surprised that AAK engineer found and solved the problem of hydraulic relief valveS at one time, while the original Russian hydraulic relief valve manufacturer can do nothing? Because the scream of pilot operated relief valve is often generated by high-pressure oil through damping hole or valve port, AAK engineer added inclined hole of valve seat and vibration elimination cavity in the original design. In this way, the dynamic and static characteristics of the hydraulic pilot operated relief valve can be improved, the screaming can be eliminated, the noise can be reduced, and the pressure control accuracy can be improved at the same time. AAK strong engineering team not only has the concept of German HAWE, but also has the experience of Italian Oil Controlï¼?the problem can be found at one time. After the successful test run, Petrov privately told us that the boss was very satisfied that he found a
Item description: Toast delicious sandwiches in 3-5 minutes in this home-union husm-168s or sw-168s sandwich maker that features nonstick plates for quick and easy cleanup. The cool-touch handles help ensure safe handling during use. Allows simple upright storage. Features: Lets you make 2 slice sandwiches simultaneously So you can prepare a meal for yourself and a friend or family member. Dual nonstick cooking plates Evenly distribute heat, ensure easy food release and make cleanup simple. Cool-touch exterior Along with a locking latch promotes safe use. Pilot/stand-by indicator light Alert you when the power is on and when the sandwich maker is preheating for efficiency. Upright design For simple storage and space-saving Color available Black, red, silver^ Specifications: Main features Controls thermostat Color white Housing white Approvals ce/gs, rohs General specifications Product dimensions(mm) 225*235*80 Slice capacity cooks 4 large toasties in 3-5 minutes Voltage/power frequency(v/hz) 220-240/50 Power consumption(w) 700w Overheat safety protection yes Safety clip to close yes Pilot light yes Non-stick coated cooking plate yes Integrated cord wrap yes Storage upright Construction cool touch plastic housing with heavy duty die cast aluminium cooking plates Warranty 1 year limited Packaging and loading Giftbox size(mm) 257*106*243 Master carton(mm) 545*268*510 Q'ty/ctn(set) 10 Container 20'c(set) 3960 Container 40'c(set) 7920 Container 40'hc(set) 9100 * cool-touch handle with auto-lock clip * power and ready light indicators * automatic temperature control * non-stick coating plates for easy cleaning * cord-wrap and upright for storage * stainless steel top housing * antislip rubber foot * ac 220-240v/50-60hz, 700w * material: pf, pbt, pc, pvc, pp, al, iron, steel, cu, foam
Batching machine ( with direct centre drive system ) : Features: 1) . Direct Centre Drive System & Surface Contact Peripheral Drive Roller with Pneumatically Controlled Arm " A" frame fabric is unwound from non-contact centre drive system and wound by peripheral drive roller with pneumatically controlled arm, especially ideal for checking delicate or heavy duty fabrics. 2) . Fabric Input, Output Synchronized- for Tensionless Roll Up Speed is controlled by an adjustable light accumulation rollers for automatic fabric synchronisation. 3) . Full Width Fabric Inspection - with 60 Degree Fixed Angle Inspection Screen Fabric can be checked under the aid of different viewing and lighting options. 4) . Accurate Fabric Length Measuring Fabric roll length can be taken by industrial standard measuring systems with digital readouts to give consistent fabric roll assessments. 5) . Stable Running & Easy Operation The whole machine is controlled by PLC and the machine can be easily operated with optional Touch Screen. 6) . Simple Fabric Control With Bow/ Banana Roller to eliminate fabric creasing and roll distortions. 7) . Stretch Fabric Control - with Scroll Roller System and Optional De-curling System Fabric control at all times to generate consistent roll width and edge output. 8) . Versatile Fabric Input and Output Options - Synchronize with Other Production Operations Optional systems are available for different fabric input and output presentations, continuous fabric input and plait input or output. 9) . Data Collection and Analysis System ( 4-point System) - Optional 100% fabric inspection with software for accurate fabric roll analysis and printout. 10) . Sampling - Optional Fabric sample can be taken by automatic linear cutter and the rest fabric can be stitched by automatic sewing machine for on going checking. Steel pallet or wooden box packing.
Zero from Italy often purchases hydraulic valve blocks. In previous years, his customer gave 95 days for delivery date. Some time ago, the customer had an urgent order for 1,200pcs of hydraulic valve blocks, and there was only 60 days from the sample of hydraulic valve blocks to delivery. For non-standard hydraulic valve blocks, the lead time is less than 30 days from drawing design, sample, service life test, production and delivery. Zero consulted all hydraulic valve block manufacturers in cooperation. They all said that it would take 60 days to complete the urgent order of 1,200 hydraulic valve blocks only for production, and the lead time in 90 days is necessary. Zero can't refuse the customer directly, so he has to find a new manufacturer of hydraulic valve blocks. Zero also understands that it is not easy to find a reliable manufacturer of hydraulic valve blocks. Moreover, this is an urgent order, and the processing of hydraulic valve blocks is also complex. There was no reply from all the manufacturers he contacted on the Internet. Occasionally, he mentioned this urgent order of hydraulic valve blocks with his friend Caled. Caled introduced him to try AAK hydraulic valves. Caled is a customer that I have worked with for several years on integrated valve blocks. Caled told Zero that AAK helped him solve several urgent orders for manifolds, and the quality was guaranteed. Zero said frankly that he was introduced by Caled and hoped to get our help. According to the drawing sent by zero, the hydraulic valve block has long and thin channels and complex oil circuit design, which is unbearable for general processing. AAK technical team first arranged the production procedure and calculated the daily output of hydraulic valve blocks. It would take 30 days to complete this urgent order. While Zero was pleased, he seemed a little worried about the quality of AAK hydraulic valve blocks. Three weeks later, their engineers tested AAK hydraulic valve block samples. The overall accuracy parameter of the hydraulic valve block is 5% higher than that of the original manufacturer, which proves what Caled has mentioned that AAK quality mentioned is guaranteed. After working overtime for 30 days, AAK successfully completed the urgent order of 1,200 hydraulic valve blocks for Zero, which is half less than the 60 days of lead time required by peers. Zero was surprised how AAK achieved it? AAK adopts the machining center of compound tools to combine two or more similar or different types of hole machining tools into one special tool. In the process of machining, reduce the tools required for machining X, Y, V and U partial views, and complete the process combination of multiple processes such as drilling, reaming, spot facing and boring. At the same time, one tool can simultaneously process threaded bottom holes, 45 , 15 , R0.1 chamfer and outer counter bore, which greatly
