Find Verified Cd Rom Writer Suppliers, Manufacturers and Wholesalers

CD series air cooled condenser

Products description:

1. The CD series products are air cooled heat exchanger for refrigeration system.
2. The air flow all the flowing out by side.
3. All the products have been tested on 2.8mpa air leakage.
4. The system is disposed of pollution.
5. Applicable to r22, r134a, r404a, r407c systems.



2pcs/ctn

Wall aquarium
Material:aluminium and mdf
Package :carton

Size:1750x400x115mm
Net weight:27.29kgs
Dimensions:0.125cbm

Material:aluminium and mdf


Size:1750x400x115mm
Net weight:8.25kgs
Dimensions:0.064cbm

Wall aquarium


Size:560x560x115mm

Multi pockets organizer with soft CD holders
Features:
Two mesh pockets
One drink holder
One CD holder
One open pocket
One large mesh pocket and umbrella holder

Carton:47 x 49 x 42cm
60PCS/CTN

Rated voltage 24v dc
Rated input power 450w
Battery capacity ni-cd 1.8ah
Ni-mh 2.3ah
Drilling capacity 13mm
No load speed 800rpm
Impact rate 4250min-1
Package bmc
Certificate ce gs emc


Color box

The manual of hydraulic valve, which is unknown to 90% of people, is broken down by AAK according to "pouring drinks into cups"

If someone asks you to write down the operation steps of "pouring the drink from the plastic bottle into the cup", 90% of people think it is simple, and 3 steps are completed: 1. Open the bottle cap. 2. Pour the drink into the cup. 3. Close the bottle cap. I read in a book by a Japanese writer that it is actually 15 steps, rather than the 3 steps that 90% of people think. Pour a drink, take 15 steps, maybe you will laugh in your heart.

Look at the decomposition action of pouring drinks by the Japanese writer:
1) Pick up the plastic bottle with your left hand
2) Grasp the cap with your right hand
3) Rotate the bottle cap anticlockwise to unscrew it
4) Put the bottle cap on the table
5) Change your right hand to hold the plastic bottle
6) Take the plastic bottle over the cup
7) Tilt the plastic bottle downward
8) Pour it to an angle that can make the drink pour out little by little
9) Restore the plastic bottle to the vertical state after pouring the drink
10) Put the plastic bottle on the table
11) Pick up the bottle cap with your right hand
12) Pick up the plastic bottle with your left hand
13) Put the bottle cap on the plastic bottle mouth
14) Turn the bottle cap clockwise and tighten it
15) Put down the plastic bottle with screwed cap

What did you think of and what should you do? Seeing this, I quickly put down my book and drank some water, it is exploration in my eyes, admiration in my heart, and details of actions.

In the workshop of hydraulic valve production, if every operation procedure of our company is more than 15 steps of the Job Manual, and it is written in such a deep and detailed way, then there will be no deviation in the staff training. No matter which operator is changed to operate, everyone is unlikely to make mistakes. I asked the production manager, production engineer, workshop director, section chief and operator of AAK Hydraulic Valve to reformulate the Job Manual of AAK Hydraulic Valve according to the 15 step beverage pouring method. They are also surprised, but they are very motivated to do this deep decomposition.

Not only in the workshop, but also in the marketing department of AAK Hydraulic Valve. In terms of marketing, promotion and sales, how to manage the behavior in a specific and detailed way, rather than some abstract and non specific instructions that cannot be executed. Those mega enterprises may say "correct nonsense", but if we imitate it, we can not even know how we â??dieâ??. The Chinese language is really broad and profound. I have seen similar workshop propaganda in other hydraulic valve manufacturers before, "strengthening communication between operators", "Learn from old technicians" and "tidy up the operation post". "Work harder on accuracy to improve customer satisfaction".

Sheet Capacity (75g) 15
Cut Type Cross Cut
Shred Size (in.) 4 x 44 mm
Paper Entry Width(in.) 240 mm
Auto Start and Stop yes
Motor Reverse yes
Auto-Stop on Jamming yes
Rated speed(ft/minute)(Max Capacity) 10FPM(3m)
Bin Capacity(Gal/L) 7.4/28
Noise Level at Capacity(Db) +¼_58
Duty Cycle (min) 5-7 on/20 off
What it Shreds CDs, Credit Cards, Staples
Separate Credit Card and CD Slot yes
Warranty (Cutter) 2 years
Product Size(LXWXH mm) 368X250X610.




Packge Dimensions (mm):440X320X680 1pc/ctn
Weight (Kg): 11
QTY for a 20/40ft Container(pcs) 273/570.

Rechargeable flashlight

Item no. Fs-c3801
Item size: 5.4*3.5*29 cm single weight: 430g
Lumileds bulb3w luxeon led, led life over 100000hrs
Ni-cd battery: 3*1/2d battery 2500ma long: 110mm
Lighting distance250m distance and with focus ajustable function
Charging hrs. 12v /500ma ac charge. 8hrs
Lighiting hrs3hrs


Packinggifx box
Meas: 59.2*31.6*38.5cm/20pcs/ctn
G. W/n. W: 20/17.5 kgs

Power driver grease gun

The specification of 12v power driver 1281 grease gun
6000psi preseure
14oz capacity reservior tube
2.0 oz/min speed
1400mahr capaity ni-cd battery pack
Maximum operatiy pressure psig 7500psi (527bar)
Input vac 120v 60hz
Input vac 220v 50hz
Charge time1.5hours
Ul was available for our battery charger

Ball pen

Features:
1) smooth and good-looking writing
2) high quality and low price
3) many kinds of design and shape are available

Name:3d cover notebook
1)product size: 440*350*280
2)product sheets: 80
3)product pages: 140
4)size: according to clients' specific requirements
5)description: top double spiral bound; pp soft covers , 100 inner sheets
(70gsm high good offset paper), blank.Inner one color printing
6)cover material:3d material
7)your unique specifications and are welcome. More information , please contact us.