1. 1:1 addition type, good adhesive strength and self-healing 2. High elongation, excellent flexibility for mechanical stress relieving 3. Low oil penetration after cured, good anti-poisoning property 4. Good dielectric in high temperature for high voltage protection 5. Excellent aging resistance and weatherability 6. Excellent waterproof, corrosion prevention, moisture proof and chemical media resistance Used for encapsulation of various modules, semi-conductor, IGBT, automotive ECU module, IC chip, weighing sensor, waterproof connector. PROPERTY STANDARD/UNITS VALUE of SI2709 ---- ---- PART A PART B Material ---- Polysiloxane Hydrogen polysiloxane Color Visual inspection Colorless Liquid Colorless Liquid Viscosity 7;C, cps 800~1000 800~1000 Density 7;C, g/cm3 0.99 0.99 Mixture/mass ratio ---- A:B=100:100 Viscosity of mixture 7;C, cps 800~1000 Operation time 7;C, min 60 Cure condition RTV or HEAT 7;C /6 hour;67;C /30min Cured appearance ---- Colorless transparent gel Needle penetration 1/mm 75 Dielectric strength KV/mm 25 Volume resistance DC500V, ohm-cm 1.0¨¢1015 Loss factor 1 MHz88;0.001 Dielectric constant 1 MHz 2.8 Application temperature7;C -60~260 Part Aa10 KG/Bucket, Part Ba10 KG/ Bucket.
1.Solvent free two component material 2.Transparent both before and after cured 3.Platinum catalyzed curing system 4.No by-products after curing 5.Low viscosity before cured, easy to application 6.Excellent flexibility, free from stress 7.Extremely low oil exudation, good anti-poisoning 8.By adjusting the mix rate of part A and part B, can adjust the gel adhesion 9.It can stick repeatable 10.It can use with polyethylene release liner 11.Pass test of physiological compatibility, poison cell, skin stimulus etc. PROPERTY STANDARD/UNITS VALUE of SI2721 ---- ---- PART A PART B Material ---- Polysiloxane Hydrogen polysiloxane Color Visual inspection Transparent Liquid Transparent Liquid Viscosity 7;C, cps 61;¨¤150161;¨¤150 Density 7;C, g/cm3 0.99 0.99 Mixture/mass ratio ---- A:B=100: (80~120) Viscosity of mixture 7;C, cps 800¨¤150 Operation time 7;C, min ¡ê¾60 Cure condition RTV or HEAT 7;C /6 hour; 67;C /5min Cured appearance ---- Transparent gel Application temperature §C -60~200 Part Aa20 KG/Bucket, Part Ba20 KG/ Bucket; Part Aa200 KG/Drum, Part Ba20 KG/ Drum. Part A is also available in 200 kg metal drums accompanied by the corresponding 200 kg of Part B.
Chemical name : Polydimethylsiloxane CAS No. : 63148-62-9 EINECE : 618-493-1 Apperance : colorless and transparent Physical and chemical features : a.Smoothness & softness & hydrophobicity & good chemical stability & insulation property b.High and low temperature resistance & high flash point. c.Low freezing point (it can be chronically used in the temperature from -50? to +200 ?). d.Small viscosity-temperature coefficicent & big compression ratio & low surface tension. -
5N-6N
We are sulphur dyes factory in china since 1980s, we have lots of clients in india, we can produce it as your sample. You are welcome to visit our factory or check our website en.Xxdyescom for more details. Sincerely want to establish long term business with you, if you have any questions, please feel free to contact me. 50kg/package
Product name: insoluble sulfur Cas no.: polymeric sulfur: 9035-99-8 Hs insoluble sulphur had been widely used in natural rubber and a variety of synthetic rubber. They are made with tire and rubber products such as: rubber belt, rubber pipe and sealants etc. They are specially used in radial truck tire making. Product standard: (enterprise standard) q/320206gad03-2008 Rubber vulcanizing agent Insoluble sulfur can improve the resistance to both fatigue and ageing of all kinds of rubber products. It is used as the best vulcanizing agent for rubber. And it is widely used in the manufacture of the rubber chemistry such as tire, rubber pipe, shoes, cable and wire, insulating materials, latex, and all kinds of automobile rubber parts, especially for radial tires. Technical specification Appearance: yellow powder (non-flying) Sulphur content (%): 66.0-68.0 Insoluble sulphur content (% min. ): 90.00 High temp. Stability (% min. ) (105 degree*15min): 80 Oil content (%): 19.0-21.0 Acid content (as h2so4), % max.: 0.05 Heating loss (60 degree *2h), % max.: 0.40 Ash, % max.: 0.05 25
Rubber adhesive ra-65(hmmm) Property: this product is the improved product of rubber adhesive a. The appearance of this product is one kind of white 3 Free formaldehyde, % ≤ 0.1 Application: this product is used in binding rubber with steel wire, nylon, rayon, fiberglass, etc. In using this product, simply mix it directly into rubber and it can achieve good adhesive effect by vulcanizing. If this product blended with rubber adhesive rs, rh, re, it can bring in better effect. As this product is one kind of white powder, and has good dispersing feature, it is easy to measure and use. Packing: packed in compound plastic bag, 25kg per bag. Keep in cool and dry while storage and transportation, strictly Standard
Size:28x24.5x4cm Weight:315g Color:pantone code 28x24.5x4
Fesi75-aSi 74.0~80.0Mn 0.4Ca 0.3Cr 0.1P 0.035S 0.02 Package: 1mt jumbo bag Dimensions: 0-10mm, 10-100mm
Si purity: 99.7% min, 99.9%min or 99.99%min Packing: 25kgs/bag Size:pls contact us for more details. 25kgs/woven bag.
1. Used in aluminum: an additive to aluminum alloys, silicon is used to increase the fluidity and tenacity of Aluminum and its alloys, which enjoy good castability and weldability accordingly. 2. Used in organic chemicals: silicon metal is used in manufacturing a number of sorts of silicones, resins, and lubricants. 3. Used in electronic parts: silicon metal is used in producing monocrystalline and polycrystalline silicon of high purity for electronic parts, such as semi conductors, etc. In plastic woven bags of about 10KG,250 KG and 1MT net each.
Applications of RTV-2 manual molding silicone rubber It is mainly applied in manual mold design, PVC plastic mould, cement product mould, low melting-point alloy mould, alloy toy craft, plastic toy, craftwork, gift and stationery, big statue, cultural relic duplication and reproductions; pad printing orientation, electronic appliances vibration resistance, etc. Features of RTV-2 manual molding silicone rubber Low shrinkage,no deformation of the mould, good elasticity, the more moulds duplicated the better, etc.
Si 75%min, al 2.0%max, c 0.2%max, s 0.03%max, p 0.04%max Size: 10-50mm, Packing: in 1 mt big bag
ferro silicon Ferrosilicon Lumps Si:75%/72%min Al:2.0%max C:0.2%max S:0.02%max P:0.04%max. Ferrosilicon Fines Si:75%/72% Al:2.0%max C:0.2%max S:0.02%max P:0.04%max Size:90%min or at buyer's option In 1mt PP woven bag . In 1mt pp woven bag Size:1-3mm,3-10mm,10-50mm,50-100mm 90%min or at buyer's option In 1mt PP woven bag .
Rubber Adhesive RA/HMMM Property: This product is the improved product of Rubber Adhesive A. The appearance of this product is one kind of white powder and gives off methanal upon heating. It is hypo-methanal donator among double functioning adhesive system for rubber Specification Appearance: White powder Ash Content (850íµ), % : 30í½38 Moisture content (Boiling Evaporation Method) í_4.5 Sieve Residue (325 mesh wet-method), % í_0.3 Free formaldehyde, % í_0.1 Application: This product is used in binding Rubber with steel wire, Nylon, Rayon, fiberglass, etc. In using this product, simply mix it directly into Rubber and it can achieve good adhesive effect by vulcanizing. If this product blended with Rubber Adhesive RS, Rh, RE, it can bring in better effect. As this product is one kind of white powder, and has good dispersing feature, it is easy to measure and use. Packing: Packed in compound plastic bag, 25Kg per bag. Keep in cool and dry while storage and transportation, strictly avoid damp. Packing:Packed in compound plastic bag, 25Kg per bag. Keep in cool and dry while storage and transportation, strictly avoid damp.
Silicon metal 441 Si:99.0%min. Fe:0.4%max. Al:0.4%max. Ca:0.1%max. Size:10-100mm,90%min. In plastic woven bags of 1 mt each.
Silicon metal #3303 Si:99.0%min. Fe:0.3%max. Al:0.3%max. Ca:0.03%max. Size:10-100mm,90%min. In plastic woven bags of 1 mt each.
(insoluble sulfur)ot20 (is-hs-7020 highly thermal stability) Technical specification Appearance: Yellow powder (non-flying) Sulphur content (%): 80.0ía1.0 Insoluble sulphur content (% min.): 72 High temp. Stability (% min.) (105íµ*15min): 75 Oil content (%): 20.0ía1.0 Acid content (as h2so4), % max.: 0.05 Heating loss (60íµ*2h), % max.: 0.40 Ash, % max.: 0.15 Fineness(100mesh), % min.: 99.8
Rubber Vulcanizing Agent (Insoluble Sulfur)OT20 (IS-HS-7020 highly thermal stability) Technical Specification Appearance: Yellow Powder (Non-flying) Sulphur Content (%): 80.0í+1.0 Insoluble Sulphur Content (% min.): 72 High temp. Stability (% min.) (105íµ*15min): 75 Oil Content (%): 20.0í+1.0 Acid Content (As H2SO4), % max.: 0.05 Heating Loss (60íµ*2h), % max.: 0.40 Ash, % max.: 0.15 Fineness(100mesh), % min.: 99.8
Packing and storage: OT20 is packed in a25 kg bag with PE lining and stored in a ventilated cool, dry place under normal conditions. Storage temperature should be less than 40íµ. Keep away from a fire heat and moisture. It cannot be stored together with amine and alkalescences, preventing blocking from stacking. Guaranteed storage is half a year. Packing: Packing and storage: IS7520 is packed in a25 kg bag with PE lining and stored in a ventilated cool, dry place under normal conditions. Storage temperature should be less than 40íµ. Keep away from a fire heat and moisture. It cannot be stored together with amine and alkalescences, preventing blocking from stacking. Guaranteed storage is half a year.
