Key Features: Chemical Composition: Silicon Carbide (SiC) Physical Properties: High hardness, low density, superior thermal shock resistance. Electrical Properties: High electrical conductivity, low dielectric loss. Thermal Properties: High thermal conductivity, excellent heat resistance. Applications: Metallurgical Industry: Lining for high-temperature furnaces. Chemical Industry: Reactor linings and catalyst supports. Electronics Industry: Semiconductor manufacturing. Mechanical Industry: High-performance mechanical components.
It is used as a deoxidiser and alloying agent in the steelmaking industry. In order to obtain a steel with a satisfactory chemical composition and to guarantee the quality of the steel, it is necessary to deoxidise it in the final stage of steelmaking. The chemical affinity between silicon and oxygen is very large, and ferrosilicon is therefore a strong deoxidising agent in steelmaking for precipitation and diffusion deoxidisation. ... It is used as an inoculant and spheroidising agent in the iron casting industry. ... Used as reducing agent in ferroalloy production.
High carbon ferrosilicon is ferrosilicon with a larger carbon content; High carbon ferrosilicon specifications and particle size: natural block, 10-100mm, powder or customized according to customer requirements. Packaging of high carbon ferrosilicon: tons of bags (1000kg/bag) or customized according to customer requirements. High carbon ferrosilicon uses: High-carbon ferrosilicon is a new type of alloy used in converters. It can replace ferrosilicon, silicon carbide, and carburizers, reduce the amount of deoxidizer, and is used in the deoxidation alloying process of converter smelting. The effect is stable, and the chemical composition, mechanical properties and The quality of internal control is better than that of traditional processes. As a new type of strong composite deoxidizer, it can also be used for tempering general steel, alloy steel and special steel. In addition, as a temperature-raising agent, it can replace the more expensive traditional temperature-raising agent required in converter and open-hearth steelmaking.
High carbon ferrosilicon is ferrosilicon with a larger carbon content; High carbon ferrosilicon specifications and particle size: natural block, 10-100mm, powder or customized according to customer requirements. Packaging of high carbon ferrosilicon: tons of bags (1000kg/bag) or customized according to customer requirements. High carbon ferrosilicon uses: High-carbon ferrosilicon is a new type of alloy used in converters. It can replace ferrosilicon, silicon carbide, and carburizers, reduce the amount of deoxidizer, and is used in the deoxidation alloying process of converter smelting. The effect is stable, and the chemical composition, mechanical properties and The quality of internal control is better than that of traditional processes. As a new type of strong composite deoxidizer, it can also be used for tempering general steel, alloy steel and special steel. In addition, as a temperature-raising agent, it can replace the more expensive traditional temperature-raising agent required in converter and open-hearth steelmaking.
1.Ferro silicon is often used as deoxidizer in steel making. 2.Ferro silicon also can be used as alloy elements join agent,which is widely used in low alloy steel,non-ferrous metal,bearing steel,heat-resistant steels and electrician silicon steel. 3.Ferro silicon commonly used as a reductant in ferroalloy production and chemical industry. 4.In iron industry,ferro silicon often used as inoculant and nodulizer and deoxidizer.
Ferrosilicon Si 75# 72# size 10-100mm, customizable, Ferrorsilicon powder Si 69-73# size 0-1mm, customizable, China high quality ferrosilicon supplier
High carbon ferrosilicon is ferrosilicon with a larger carbon content; High carbon ferrosilicon specifications and particle size: natural block, 10-100mm, powder or customized according to customer requirements. Packaging of high carbon ferrosilicon: tons of bags (1000kg/bag) or customized according to customer requirements. High carbon ferrosilicon uses: High-carbon ferrosilicon is a new type of alloy used in converters. It can replace ferrosilicon, silicon carbide, and carburizers, reduce the amount of deoxidizer, and is used in the deoxidation alloying process of converter smelting. The effect is stable, and the chemical composition, mechanical properties and The quality of internal control is better than that of traditional processes. As a new type of strong composite deoxidizer, it can also be used for tempering general steel, alloy steel and special steel. In addition, as a temperature-raising agent, it can replace the more expensive traditional temperature-raising agent required in converter and open-hearth steelmaking.
Ferro-Silico-Aluminum is a deoxidizer used in steelmaking production. It improves the shape of inclusions and reduces the content of gas elements in molten steel. It is an effective new technology to improve steel quality, reduce costs, and save aluminum. It is especially suitable for the deoxidation requirements of continuous casting molten steel. Practice has proved that it not only meets the deoxidation requirements of steelmaking, but also has desulfurization performance and has the advantages of large specific gravity and strong penetrating power.
Silicon carbide is composed of carbon and silicon elements. It has many excellent properties, making it widely used in various fields. With outstanding high temperature resistance, it can withstand temperatures above 1600�°C. Silicon carbide can be used as a refining agent in the steelmaking process. It provides high-temperature reduction, helping to remove impurities and oxides from the steel, improving its quality and purity. Due to its unique properties, silicon carbide finds wide application in areas such as abrasive tools, high-temperature equipment, steelmaking, chemical industry, optical components, and solar energy. Additionally, silicon carbide is also used in the production of ceramic products, thermal barrier coatings, and catalysts.
WSD-302AB is two components of silicone adhesive , it is fast-cure type glue for cured silicone rubber bonding with cured silicone rubber at high temperature.
Silicone soft touch smooth feeling oil is also called silicone matting oil, silicone matte oil, etc. It is mainly used for coating silicone-based products. Because of silicone products molded out of the surface are rugged and wrinkled, feeling bad while touch it, generally by spraying soft touch smooth feeling oil to improve the silicone surface effect, make it have have a delicate and smooth feelings, and increase products additional value and selling point. Features: Soft touch smooth feeling, anti-sticking, Reduced friction,dust proof functions.
PTC-200A/B is a platinum catalytic vulcanizing agent for molding and hot air vulcanization of compounded silicone rubber, and the vulcanized products are odorless, non-toxic, and anti-yellowing. When used for molded products, it can achieve fast vulcanization at about 110-130â?? (measured mold temperature), and at the same time, it has a relatively long waiting time at room temperature after refining. platinum vulcanizing agent is really an effective alternative to the double two five vulcanizing agent, and more efficient, more environmentally friendly, saving the overall cost! Application products: silicone baby care products
C-20 anti-yellowing vulcanizing agent, is a mixture of peroxide and raw rubber carrier, also used in silicone products molding vulcanization process, used in high-quality products for long-term use, used for transparent, semi-transparent and white, semi-transparent color and other products to prevent yellowing phenomenon, in the transparent or white parts, to ensure that high temperature vulcanization for many times (or the second vulcanization of 200 â?? for about 4 hours of baking), the product does not turn yellow, applicable to the color of pieces of anti-yellowing, to ensure that the color of colored parts do not turn yellow after many times of vulcanization, as well as long-term use of the color does not change color!
C-14 odorless vulcanizing agent, with excellent dispersion, fast vulcanization speed and odorless vulcanized silicone products, is suitable for crosslinking of vinyl silicone rubber, polyethylene and ethylene propylene rubber. It is importantly used in food grade silicone products, kitchen products and baby products. Composition: Aã?? Silicone polymer Bã??Active peroxide C. Anti-yellowing agent Application products: silicone Kitchenwares, silicone household products
Liquid silicone colorant, is a new type of silicone colorant developed for liquid silicone, good compatibility with liquid silicone, good dispersion, strong coloring power, high temperature resistance, no migration, easy and convenient to add, in line with ROHS, REACH and other environmental requirements. Silicone color paste is widely used in liquid silicone injection extrusion and other processes of coloring. Features: It has the excellent qualities of heat resistance, light resistance, migration resistance, color separation resistance, easy out, acid and alkali resistance, strong coloring power, and high solid content.
SPK Customized MoSi2 heating element MoSi2 resistive heating element is a high temperature resistant and anti-oxidation resistance heating element based on molybdenum disilicide. When used in high-temperature oxidizing atmosphere, a layer of bright and dense quartz (SiO2) glass film is formed on the surface, which can protect the inner layer of the silicon molybdenum rod from oxidation, so the silicon molybdenum rod element has unique high-temperature oxidation resistance. Under oxidation atmosphere and the maximum service temperature is 1800 �¢??, the resistance of the silicon molybdenum rod electric heating element increases rapidly with the increase of temperature, and the resistance value is stable when the temperature is constant. Under normal conditions, the element resistance does not change with the length of service time, so the new and old silicon molybdenum rod heating elements can be mixed.
We are a factory specializing in the production of ferroalloys. We were established in 1997 and have been supplying ferroalloys to countries all over the world for a long time. We hope to communicate with you in detail.
Various models can be customized. High-carbon Silicon is Silicon with a larger carbon content. High-carbon silicon Iron is a new type of alloy used in converters. It can replace ferrosilicon, silicon carbide and carburizing agents, reduce the amount of deoxidizer, and is used in the deoxidation alloying process of converter smelting. The effect is stable, and the chemical composition, mechanical properties and internal quality of the steel are all uniform. Better than traditional craftsmanship. As a new type of strong composite deoxidizer, it can also be used for the tempering of general steel, alloy steel and special steel. In addition, as a temperature-raising agent, it can replace the more expensive traditional temperature-raising agent required in converter and open-hearth steelmaking.
Various models can be customized. Alloy silicon balls are commonly used silicon-based alloy additives in the alloy preparation process. They are usually in the form of spherical particles and consist of a high proportion of silicon elements. They can be used as deoxidizers and reducers. During the steelmaking process, alloy silicon balls react with oxygen, reducing it to gaseous form, thereby reducing the oxygen content and improving the purity and quality of the steel. The presence of silicon increases the hardness, strength, and wear resistance of the steel. By controlling the amount of alloy silicon balls added, specific performance requirements of the steel can be met. Additionally, the addition of alloy silicon balls can improve the fluidity and wetting ability of the steel, facilitating smooth operation and uniform distribution of the molten steel during the smelting process. Alloy silicon balls exhibit good thermal stability, allowing them to operate effectively in high-temperature environments. Their inclusion enhances smelting efficiency, reduces energy consumption, and lowers production costs, ultimately improving the efficiency and quality of steel production.
Various models can be customized 1. Silicon carbon can be used as metallurgical deoxidizer and high temperature resistant material in smelting. 2. Silicon carbide can also be used as abrasive, which can be used to manufacture abrasive tools, such as grinding wheels, oil stones, grinding heads, etc. 3. Silicon carbon is a new type of reinforced steelmaking deoxidizer and an ideal thermal insulator. It is used for deoxygenation. Using a dose of 14kg/t can reduce power consumption by 15-20kw/h and time by 15-20 minutes per furnace to increase productivity to 8-10%.
