Inconel nickel alloy It is a solid-solution strengthened nickel-based deformed superalloy with molybdenum and niobium as the main strengthening elements. It has excellent corrosion resistance and oxidation resistance. It has good tensile properties and fatigue properties from low temperature to 980 �° C, and is resistant to salt spray. Stress corrosion in atmosphere. Therefore, it can be widely used in the manufacture of aero-engine parts, aerospace structural parts and chemical equipment. The alloy has good processing and welding properties, and can supply a variety of plates, bars, pipes, wires, strips and forgings
Incoloy is a nickel-chromium-iron alloy, which is a nickel-iron-chromium iron-nickel-based corrosion-resistant alloy designed for anti-oxidation and carbonization when the temperature rises. This alloy is used in high-temperature water vapor, including steam-air-CO2 In mixed gas, it has good corrosion resistance. In some high-temperature and high-pressure water media, its stress corrosion resistance is significantly better than 18-8 stainless steel and Inconel600; it also has good corrosion resistance in H2+H2S media. In the alkaline medium containing NaOH, its stress corrosion resistance is better than high-nickel alloys such as Inconel600.
Monel 401 has excellent strength and plasticity, and has good pressure processing performance in both cold and hot states. It is a corrosion-resistant alloy with large dosage, wide application and excellent comprehensive performance. The alloy has excellent corrosion resistance in HF and F2 media, and is one of the few important materials that can withstand hydrofluoric acid. An important feature of this alloy is that it generally does not produce stress corrosion cracks and has good cutting performance. A kind of Monel alloy, its alloy structure is a high-strength single-phase solid solution, 3 a nickel-based alloy similar to Monel 400, and the corrosion resistance of the metal is fundamentally obtained by hindering the migration of charged particles through the discharge process of hydrogen ions. Obtained, the addition of 30% Cu by mass fraction minimizes the corrosion rate of TH, Ni in F, Cl and other halogen element ionic media, and the higher the Cu content, the better the resistance to sulfuric acid and phosphoric acid. Adding mass fraction to Monel 401 55% Cu improves the corrosion resistance of the alloy in reducing acids. Application fields: Wirewound Resistors bimetal contact Electrical and Electronic Applications Marine Engineering Chemical and Hydrocarbon Processing Equipment petrol and fresh water tanks Distiller degas heater Boiler feed water heaters and other heat exchangers Valves, pumps, shafts, fittings and fasteners Industrial heat exchanger Chlorinated solvents Crude distillation tower We can provide the following the form:Monel alloy401 coil; Monel alloy 401 strip;Monel alloy 401 plate; Monel alloy 401 sheets; Monel alloy 401 tube; Monel alloy 401 pipe;Monel alloy 401 flat; Monel alloy 401 bar UNS:N04401
Incoloy 903 is a high-temperature alloy material, also known as Inconel 903, which is a kind of nickel-based alloy. It is mainly composed of nickel, chromium, iron, cobalt, copper, titanium, aluminum and other elements. It has good high temperature strength, creep resistance and corrosion resistance, and is widely used in aerospace, petrochemical, energy and other industries under high temperature and high pressure environments. and other fields. Following are some features and applications of Incoloy 903: characteristic High temperature strength: It has good strength and rigidity at high temperature, and can withstand stress and load under high temperature and high pressure environment; Creep resistance: It can be used for a long time without deformation under high temperature and high pressure environment; Corrosion resistance: good corrosion resistance in strong acid, strong alkali and other corrosive media; Machinability: Incoloy 903 can be machined, forged and welded through a variety of processing techniques. The international standards for Incoloy alloy 903 in various countries are as follows: United States: AMS 5800, AMS 5801, AMS 5802, AMS 5803, AMS 5826, ASTM B166, ASTM B408, UNS N19903 Germany: DIN 17742, DIN 17754, W.Nr. 2.4633 United Kingdom: BS HR 6, BS 3076 Europe: EN 10095 We can provide the following the form:Incoloy alloy903 coil; Incoloy alloy903 strip;Incoloy alloy903 plate; Incoloy alloy903 sheets; Incoloy alloy903 tube; Incoloy alloy903 pipe;Incoloy alloy903 flat; Incoloy alloy903 bar BS:HR 5/JIS:NW4893/UNS:N19903/W.Nr:2.4665 Incoloy 903 has a wide range of applications, mainly used in the following fields: Aerospace industry: components such as aero-engines, aero-bearings, gas turbines, etc.; Petrochemical industry: such as chemical reactors, high pressure vessels, steam generators and other equipment; Energy industry: such as nuclear reactor components, heat exchangers, coal-fired power plant boilers and other equipment; Other fields: such as the manufacture of high-temperature valves, heat treatment furnaces, medical equipment, etc.
Haynes 188 is a high-temperature, high-strength, and high-corrosion-resistant superalloy developed and produced by Haynes International in the United States. It is typically used in high-temperature, high-pressure, and corrosive environments. Haynes 188 alloy is renowned for its outstanding high-temperature strength and excellent corrosion resistance. The main components of Haynes 188 alloy include nickel, chromium, molybdenum, iron, titanium, aluminum, and tantalum. The combination of these elements gives Haynes 188 extremely high heat resistance and corrosion resistance. It can be used at temperatures as high as 1095 and has excellent oxidation and thermal corrosion resistance. Additionally, Haynes 188 has good machinability, weldability, and castability, making it suitable for manufacturing components of various shapes and sizes. The following are the international standards for Haynes 188 alloy: United States: AMS 5608, AMS 5772, AMS 5801, AMS 5796, AMS 5797, AMS 5800, AMS 5879, AMS 6925, AMS 5803, AMS 5596, AMS 5708, AMS 5804, AMS 5806, AMS 5799, AMS 5836, AMS 5875, AMS 5954, ASTM B574, ASTM B574M, ASTM B435, ASTM B582, UNS R30188 Europe: EN 2.4683, EN 2.4684, EN 2.4694 Germany: DIN 17743 France: AFNOR Z 20 CNDT 35.20, AIR 9165 United Kingdom: BS HR 203, BS HR 504, BS HR 505 Japan: JIS NW 5886 We can provide the following the form:Haynes 188 coil; Haynes 188 strip;Haynes 188 plate; Haynes 188 sheets; Haynes 188 tube; Haynes 188 pipe;Haynes 188 flat; Haynes 188 bar GB:GH5188/JIS:NW 6190/UNS:R30188/W.Nr:2.4683 Haynes 188 is primarily used in aerospace, petrochemical, chemical, energy, and marine fields. In aerospace, Haynes 188 is commonly used to manufacture components such as turbine blades, combustors, and nozzles in turbine engines. In petrochemical, chemical, and energy fields, Haynes 188 is often used to manufacture petrochemical reactors, catalyst carriers, high-temperature pipelines, corrosion-resistant coatings, and oil extraction equipment. In the marine industry, Haynes 188 is commonly used to manufacture components in marine environments such as propellers and bearings. Overall, Haynes 188 alloy has excellent high-temperature, high-strength, and high-corrosion resistance properties and is widely used in various industrial fields. It is an important superalloy material.
Haynes 242 is a nickel-chromium-molybdenum alloy with excellent high-temperature strength, good oxidation resistance, and resistance to hot corrosion and thermal fatigue. It is typically used in gas turbine engine components, such as turbine blades, vanes, and combustor liners, as well as in industrial furnace applications. Haynes 242 offers excellent high-temperature strength, with a minimum yield strength of 880 MPa and a minimum tensile strength of 1100 MPa. It also has good ductility, with a minimum elongation of 12%. In addition, it has good thermal stability and resistance to thermal fatigue, making it suitable for use in high-temperature applications. Haynes 242 also has good resistance to oxidation and hot corrosion, which makes it suitable for use in gas turbine engine components that are exposed to high-temperature and corrosive environments. It has a maximum HB hardness of 300 and excellent fatigue strength at high temperatures. Haynes 242 is typically available in the form of sheet, plate, bar, and wire. It can be machined using conventional methods and is weldable using standard welding techniques. Overall, Haynes 242 is a high-strength, high-temperature alloy with excellent resistance to oxidation and hot corrosion, making it ideal for use in gas turbine engine components and industrial furnace applications. Here are the national standards for Haynes 242 alloy: United States: AMS 5708, AMS 5776, AMS 5777, AMS 5853, AMS 5854, AMS 5857, AMS 5858, AMS 5895, AMS 5896, AMS 5897, AMS 5898, AMS 5965, AMS 5966, AMS 5967, AMS 5968, AMS 5969, AMS 5970, AMS 5971, AMS 5972, AMS 5973, AMS 5974, AMS 5975, AMS 5976, AMS 5977, AMS 5978, AMS 5979, AMS 5980, AMS 5981, ASTM B435, ASTM B572, UNS R30556 Europe: EN 2.4683 Germany: DIN 17743, VdTÃ??V 435 United Kingdom: BS HR 202, BS HR 501, BS HR 502 Japan: JIS NW 6242 We can provide the following the form:Haynes 242 coil; Haynes242 strip;Haynes 242 plate; Haynes 242 sheets; Haynes 242 tube; Haynes 242 pipe;Haynes 242 flat; Haynes 242 bar GB/JIS:NW 625/UNS:N10242/W.Nr:2.4683 Haynes 242 is typically used in gas turbine engine components, such as turbine blades, vanes, and combustor liners. It is also used in industrial furnace applications, including muffles, retorts, and heat treating fixtures. The high-temperature strength and excellent resistance to oxidation and hot corrosion make Haynes 242 an ideal material for use in high-temperature and corrosive environments. It is commonly used in aerospace, power generation, and industrial applications where high-temperature and corrosive conditions are present.
Haynes HR120 is a nickel-based alloy with excellent high-temperature strength, good resistance to oxidation and thermal fatigue, and excellent creep resistance. It is typically used in gas turbine engine components, such as turbine blades and vanes, as well as in industrial furnace applications. Haynes HR120 offers excellent high-temperature strength, with a minimum yield strength of 830 MPa and a minimum tensile strength of 980 MPa. It also has good ductility, with a minimum elongation of 14%. In addition, it has excellent creep resistance, with a rupture life of up to 20,000 hours at 760�°C. Haynes HR120 also has good resistance to oxidation and thermal fatigue, which makes it suitable for use in gas turbine engine components that are exposed to high-temperature and corrosive environments. It has a maximum HB hardness of 290 and excellent fatigue strength at high temperatures. Haynes HR120 is typically available in the form of sheet, plate, bar, and wire. It can be machined using conventional methods and is weldable using standard welding techniques. Overall, Haynes HR120 is a high-strength, high-temperature alloy with excellent resistance to oxidation and thermal fatigue, making it ideal for use in gas turbine engine components and industrial furnace applications where high-temperature and corrosive conditions are present. Here are the international standards for Haynes HR120 alloy: USA: AMS 5538, AMS 5794, AMS 5795, AMS 5798, AMS 5859, AMS 5860, AMS 5936, AMS 5937, AMS 5960, AMS 5961, AMS 5977, AMS 5978, AMS 5979, AMS 5980, AMS 5981, AMS 5990, AMS 5991, ASTM B435, ASTM B582, UNS N08120 Europe: EN 2.4869 Germany: DIN 17742 UK: BS HR 206 Japan: JIS NW 6888 We can provide the following the form:Haynes HR120 coil; HaynesHR120 strip;Haynes HR120 plate; Haynes HR120 sheets; Haynes HR120 tube; Haynes HR120 pipe;Haynes HR120 flat; Haynes HR120 bar GB/JIS/UNS:N08120/W.Nr Haynes HR120 is a high-strength, high-temperature alloy that is commonly used in gas turbine engine components and industrial furnace applications where high-temperature and corrosive environments are present. It offers excellent high-temperature strength, good ductility, and excellent creep resistance. The following are some of the specific applications of Haynes HR120: Gas turbine engine components: Haynes HR120 is often used in the manufacture of turbine blades, vanes, and other components in gas turbine engines. Its high-temperature strength, excellent creep resistance, and resistance to thermal fatigue make it ideal for use in this application.
The stainless steel bellows is widely used in automatic control and measuring instruments, vacuum technology, machinery industry, electric power industry, transportation and atomic energy industry as sensitive components, damping components, compensation components, sealing components, valve components and pipeline connectors. And other fields.
Alloy Powder Code : 01
We are manufacturer of beryllium metal, beryllium oxide, beryllium fluoride, aluminum beryllium master alloy, beryllium copper master alloy, beryllium copper alloy(C17000, 17200, 17300, 17410, C17500, C17510, JK520, JK38, etc).
Product Name:Magnesium Ingot Product packaging: Magnesium or wooden pallets, strapped with steel straps, and covered with plastic film. Specific packaging differs from customer requirements or contractual requirements. Conventional products generally weigh per pallet: about 1-1.25 tons. Product application: Mainly used in four major fields of magnesium alloy production, aluminum alloy production, steelmaking desulfurization, and aviation. In addition, it is also used in rare earth alloys, metal reduction, chemical industry and instrument manufacturing.
Application - For producing heating elements and refractory parts in high temperature furnaces - For producing electric light source parts and electric vacuum components - Suitable for producing ion implantation parts - Used in glass and glass fiber industry - Used as electrodes
TZM is a particle-strengthened molybdenum based alloy containing titanium, zirconium and carbon.TZM is widely used in the aerospace, aviation and other industries. It could be used as nozzle material, valve body, gas piping materials, tubes in the gate material, die casting molds, extrusion dies and high temperature furnace heating element and heat shield etc.
1. Purity: Mo 99.95% 2. Density: 10.2g/cm3 3. Wall thickness: â?¥ 1mm 4. Length: 1000mm (max. ) 5. High performance, competitive price
Stretching metal parts- factory custom, lianda industrial science and technology (dalian) co., ltd. Was established 1998, is a precision sheet metal processing and laser cutting, punching, cutting, folding, pressing, welding and other train professional design and production enterprises. The company has the most advanced laser cutting machine and sheet metal processing equipment. One of the important equipment bystronic laser cutting machine, japan amada cnc shears, japan amada cnc punching, cnc bending machine, bystronic bending machines. The product quality and the technology are in the international advanced level. Company to undertake the business of precision sheet metal processing: widely applicable to public utilities, communications, electricity, power, air conditioning, industr ial, power amplifier, transportation, advertising and other industries. Main business: laser cutting service china, sheet metal fabrication china, sheet metal parts china, sheet metal parts oem china, odm/oem professional stainless steel 316/303/304 sheet metal stamping parts with cnc laser cutting bending etc
Standard materials are either galvanized or stainless steel. Standard packages products are shown in the tables above, special specifications available on request. Specifications: Outside Diameter No. of Loops Standard Length per Coil Type Notes 450mm 33 8M CBT-65 Single coil 500mm 41 10M CBT-65 Single coil 700mm 41 10M CBT-65 Single coil 960mm 53 13M CBT-65 Single coil 500mm 102 16M BTO-10.15.22 Cross type 600mm 86 14M BTO-10.15.22 Cross type 700mm 72 12M BTO-10.15.22 Cross type 800mm 64 10M BTO-10.15.22 Cross type 960mm 52 9M BTO-10.15.22 Cross type Notes: Standard products are shown in the tables above, special specifications available on request. Standard materials are either galvanized or stainless steel.
1. Specifications: Can process all kinds of sintering crucibles, machining crucibles and tubes according to the request of customers. Diameter(mm) Height(mm) Wall Thickness(mm) 6-10 �1.3 >150-270 �2.5 >200-300 �2.5 >10-15 �2.0 >270-380 �3.0 >300 �3.0 >15-20 �2.5 >380 �3.5 >300 �3.0 >20 �3.0 2. Surface Treatment: Annealed State, Electrolytic Polish 3. Application: Mainly used in metallurgical industry, machinery processing, glass and ceramic industries, as containers for coating materials. Because of molybdenum and molybdenum alloy material with high temperature, low pollution features, molybdenum crucible is widely used as LED industry ruby and sapphire crystal growth, rare earth smelting in the field of such as special high temperature resistant containers. 4. Advantage of our Mo crucible - uniform grain with densified microstructure ensures longer use time. - High special strength, high melting point - Excellent corrosive resistance, good thermal resistance. - Professional after-sales service
Molybdenum Heat Shield: As thermal insulation components, molybdenum heat shield and molybdenum covers play a important role for heat blocking and reflecting in sapphire growth furnace. A high purity, precisely sized, smoothly clean, easy assembly and appropriately designed heat shield is significant for crystal pulling quality. As the heat-shield parts in the sapphire growth furnace, the most decisive function of molybdenum reflection shield is to prevent and reflect the heat in the furnace. Heat-shield parts with high-density, exact-measurement, smooth-surface, convenient-assembly and reasonable-design has great significance in improving the crystal-pulling. Molybdenum heat shield Dimension (mm): Molybdenum Cover Plates Molybdenum Heat Shield/ Single sheet Sheet Thickness Dia (Max) Sheet Thickness Dia(Max) Height(Max) 2.0 0.1 660 0.2 2.0 0.1 450 2 660 1 1.0 0.08 660 0.2 1.0 0.08 610 2 660 1 0.5 0.04 660 0.2 0.5 0.04 700 2 660 1 0.3 0.03 660 0.2 0.3 0.03 700 2 660 1 Molybdenum heat shield processes and quality control: No. Processes Equipment Quality 1 Molybdenum sheet 1.Physical and chemical properties accordance with customers specification 2.Correct size 3.Clean surface, no defect. 2 Inspection 3 Roll bending Asymmetric three-rollers plate bending machine Correct barrel height and diameter 4 Drilling and riveting CNC milling machine, bench driller Firmly riveting 5 Cleaning Surface clean and no defect 6 Inspection Correctly positioned assembly holes 7 Assembling Clean surface 8 Cleaning Correct barrel height and diameter 9 Inspection Firm assembly, no bond between layers 10 Packing Firm wooden case within quality certificate
Quick Details Place of Origin: Henan, China (Mainland) Brand Name : Kekai Model Number: Mo1 Dimensions: As user's demand Shape: Wire Material: Molybdenum, Pure Mo Chemical Composition: Mo1 99.95%min. Condition: New Warranty:2 years Dimension: As user's demand Tensile Strength: 800N/mm2 Melting Point: 2610 Appearance: Metallic silver luster Recrystallization: Starting Temperature Packaging & Delivery Packaging Details: Molybdenum Wire: Wooden case or according to customer's request Delivery Detail: Within 7-20 days after order confirmation Product Description: Specifications: molybdenum wire 1. Grade: Mo1, Mo2, TZM, 2. Purity :> =99.95% 3. Characteristic: 1) Melting Point: 2610 Degrees Celsius 2) Density: 10.2g/cm3 3) High quality, workability 4. Certificate: GB/T9001:2008 / ISO9001:2008/ 5. Product Feature: High melting point, High-density, high temperature oxidation resistance, long service life, resistance to corrosion. 6. Dimensions and tolerance (According to clients requirements): Grade Mo-1 Grade Mo-1 The impurity content is not more than % Pb -- The impurity content is not more than % Si 0.003 Bi -- Ca 0.002 Sn -- Mg 0.002 Sb -- P 0.001 Cd -- C 0.020 Fe 0.006 O 0.003 Ni 0.003 N 0.003 Al 0.002 -- -- Application: Molybdenum wire, moly wire, spray wire is mainly used for auto parts spraying, such as piston ring, synchronizer rings, shift elements, etc. Molybdenum spray wire is also used in repairs of machine parts, such as bearing, bearing shells, shafts, etc. Furthermore, molybdenum spray wire is applied as an intermediate layer. With more than10 years experience in metal wire, we can supply the accustomed dimension such as dia.3.17mm, 2.31mm, 1.6mm and 1.45mm, etc. The reel weight of heavy molybdenum wire without welding can reach 25kg. Package: coils wrapped with waterproof paper with carton box outside. Specifications: Molybdenum Wire Types Diameter (inch) Tolerance (%) Molybdenum Wire for EDM 0.0024" ~ 0.01" �3% wt Molybdenum Spray Wire 1/16" ~ 1/8" �1% to 3% wt Molybdenum Wire 0.002" ~ 0.08" �3% wt Molybdenum Wire(clean) 0.006" ~ 0.04" �3% wt It is regular black with smearing graphite surface. After removing graphite, it has metallic luster Features: Very good interlaminar strength at strong thermal and mechanical loadings.
Specifications: 1. Product name: Molybdenum tube 2. Material: Mo >99.95% 3. Density: 9.2~10.2g/cc 4. Grade: Mo1,Mo2,Mo3,TZM 5. Standard: ASTM B387 6. Surface Treatment: Annealed State, Electrolytic Polish 7. Characteristic: Certificate: ISO9001:2008 8. Product Feature: 1) High melting point, high strength, Melting Point: 2610 �C, Boiling Point:5560 �C 2) Outstanding thermal conductivity, 3) Excellent resistance to oxidation at high temperatures, 4) Excellent resistance to electrochemical corrosion 5) long service life, 9. Dimensions and tolerance(According to clients requirements): Density Outer Diameters Length Wall Thickness Forged Molybdenum Tube/Pipe �?�9.9g/cm3 4-150mm �?�800mm �?�1.0mm Sintered Molybdenum Tube/Pipe �?�9.7g/cm3 100-500mm �?�800mm �?�5.0mm 10. Composition: Grade The impurity content is not more than % Fe Ni Al Si Mg C N O Mo-1 0.01 0.005 0.002 0.01 0.005 0.01 0.003 0.008 Mo-2 0.01 0.005 0.005 0.01 0.005 0.01 0.003 0.02 11. Application: 1) Molybdenum Tube is widely used as the contact materials in silicon controlled rectifier diodes, transistors and thyristors. 2) Molybdenum Tube is used as mounting material for power semiconductor devices. 3) TFT - LCD monitor use of molybdenum target tube. And copper indium gallium selenide CIGS and cadmium telluride CdTe coating using two kinds of thin film solar cells of sputtering target rotating pipe. Vacuum furnace heating switches use 25.4 * 998 molybdenum tubes. And other specifications of the molybdenum tubes.
