Precision casting metal parts
Sheet metal part
stamped metal part #0494
Custom CNC Machine Components
1.6mm nial95/5 alloy wire for thermal spray wire Nickel aluminum 95/5 Introduction Nickel aluminum 95/5 thermal spray wires can be use as bond coatings and for machine element restoration widely. The materials show an exothermic reaction during the spray process, also can produce dense coatings with exceptionally high bond strengths that self-bond to most metallic substrates and can tolerate elevated temperatures and oxidizing atmospheres.Wisdom brand nickel aluminum 95/5 thermal spray wires can equivalent to: tafa 75b, sulzer metco 8400. Typical uses and applications Bond coatings under ceramic top coatings. Build-up of machinable carbon steel and corrosion-resistant steels. Under the condition of high temperature and low temperature as the fretting resistance. High-temperature anti-corrosive coating. Product details Chemical composition: Nominal compositionAl %Ni % Min4.5 Max Bal. Specifications: GradeGePwa Nickel aluminum 95/5B50tf5636937 Physical properties: GradeDensityMelting pointElectrical resistivity at 20°c o mm2/m Nickel aluminum 95/58.2 g/cm31430°c0.42 Typical deposit characteristics: Typical hardnessBond strengthDeposit rateDeposit efficiencyMachilityineab Hrb 759500 psi 10 lbs /hr/100a60-70%Good Standard sizes & packing: Diameter Dimension tolerancePackingWire weight 1/16 (1.6mm)+ 0/-0.05D 300 spool15kg((33 lbs)/spool Other sizes can produced based on customers' requirement.
Wisdom420 is a 420 stainless steelwire, specifically designed forarc spray processes. Wisdom 420 forms a dense, well bonded coating, with excellent wear resistance and good corrosion resistance. It is widely used for machine elements repair, dimensional restoration, and wear resistant application. Wisdom 420's low shrink rate characteristics, allows for increased coating thick nesson parts requiring heavier coatings.. Typicaldeposit surfacepreparation: •typicalhardness hrc40-45 •bondstrength 6500psi •depositrate 10lbs /hr/100a •depositefficiency 70% cleaning. •wirecoverage 0.8oz/spft2/mil •surfacetexture *variable •corrosionresistance good Chemicalcomposistion(wt%): Cr c mn si ni fe others 13.0 0.35 0.6 0.5 0.5 bal 0.54 Recommendedsprayparameters: Diameter airpressure voltage amperage standoff 1.6mm 50 -60 psi 28-30 100-200 4- 6 in (10-15cm) *parametersaretypicalandmayvarydepending onequipmentused.Contactyour equipmentmanufactureforoptimumsprayparameters. Standardsizes&packaging: Diameter Dimension Packing Wire weight Tolerance 1/16"(1.6mm) +0/-0.05 D 300 spool 15kgs(33 lbs)/spool 2.0mm +0/-0.05 D 300 spool 15kgs(33 lbs)/spool 1/8"(3.17mm) +0/-0.05 Coil form 20-400kgs/coil
thermal spray wire TAFA 97 is a solid wire specifically designed for arc spray systems. It is a titanium and tungsten carbide alloy in an amorphous matrix. TAFA 97 produces a hard, abrasive and corrosion resistant coating, with a service environment of up to 1000° F. TAFA 97 is used in a wide variety of industrial high wear applications. Packaging & Shipping Packaging:Products are generally supplied in standard cardboard boxes, pallets, wooden boxes. Special packaging requirements can also be accommodated. (also depend on the customers' requirements) For the Thermal spray wires , we pack the wires on spools. Then put spools into cartons, Then put the cartons onto pallet. Shipping: We cooperation with many logistics company,We can provide express, sea transportation, air transportation, and rail way transportation based on customers' requirement. Our Services 1) We can provide a free sample for testing. 2) Customized lable, packing, OEM service 3) Mill test certificate will be provided after production, If it is necessary. 4) Good packing methods to keep goods no damage during delivery 5) We are cooperation with many famous forwarder, will try our best to choose the safty, convenience, quick, and cheap mode of transportation for our customers. Company Information: Capacity and Main markets. Our company has more than 20 years of experience in alloy products. The company covers 10000m2.The annual output reaches 5000 tons. The products apply to chemical industry, metallurgy mechanism, glass industry, ceramic industry, home appliance area widely. In china, we mainly do business with army industry, and for worldwide, our selling net-work has expanded to Russia, Ukraine, Germany, Iran, India, Itlay, America etc. Quality Assurance. According to international standard, we introduce new techniques and new processes, so we can keep improving product quality. There are strict processes and quality manages to make sure the products keep updated, and be well received by users. Equipment. Our major equipment, vacuum induction furnace, intermediate frequency induction furnace, electroslag furnace, skanthal A1 bath furnace, wiredrawing units, heat treatment production line and soon. Test equipment: straight reflection spectrograph , spectrometer , chemical analyse lab , machinery properties lab (omnipotent test machine,hardness test machine inside), also metallography laboratory, ultrasonic harmless test,etc. FAQ Product: What is your min order? For the Thermal spray wire, Our min order is 15kg . What is the wire weight of each spool? The wire weight of each spool is around 15kg, also can be produce according to customers' requirement. Whether can you provide a Mill Test Certification? We can provide a Test certification after production.
Introduction NiCrTi/45 CT wire is a Nickel/Chrome/Titanium wire developed specifically for boiler applications. This second generation material replaces 06BXP and produces coatings which are extremely resistant to corrosive vanadium and sulfur gases in boiler atmospheres. Product Details Chemical composition: Nominal composition Cr% Ni +Ti% Min 45 Max Bal. Standard Sizes & Packing: Diameter Packing Wire Weight 1/16 (1.6mm) D 300 Spool 15kg((33 lbs)/spool Other sizes can produced based on customers' requirement. Packaging:Products are generally supplied in standard cardboard boxes, pallets, wooden boxes. Special packaging requirements can also be accommodated. (also depend on the customers' requirements) For the Thermal spray wires , we pack the wires on spools. Then put spools into cartons, Then put the cartons onto pallet. Shipping: We cooperation with many logistics company,We can provide express, sea transportation, air transportation, and rail way transportation based on customers' requirement. 1) We can provide a free sample for testing. 2) Customized lable, packing, OEM service 3) Mill test certificate will be provided after production, If it is necessary. 4) Good packing methods to keep goods no damage during delivery 5) We are cooperation with many famous forwarder, will try our best to choose the safty, convenience, quick, and cheap mode of transportation for our customers. Capacity and Main markets. Our company has more than 20 years of experience in alloy products. The company covers 10000m2.The annual output reaches 5000 tons. The products apply to chemical industry, metallurgy mechanism, glass industry, ceramic industry, home appliance area widely. In china, we mainly do business with army industry, and for worldwide, our selling net-work has expanded to Russia, Ukraine, Germany, Iran, India, Itlay, America etc. Quality Assurance. According to international standard, we introduce new techniques and new processes, so we can keep improving product quality. There are strict processes and quality manages to make sure the products keep updated, and be well received by users. Equipment. Our major equipment, vacuum induction furnace, intermediate frequency induction furnace, electroslag furnace, skanthal A1 bath furnace, wiredrawing units, heat treatment production line and soon. Test equipment: straight reflection spectrograph , spectrometer , chemical analyse lab , machinery properties lab (omnipotent test machine,hardness test machine inside), also metallography laboratory, ultrasonic harmless test,etc. What is your min order? For the Thermal spray wire, Our min order is 15kg . What is the wire weight of each spool? The wire weight of each spool is around 15kg, also can be produce according to customers' requirement. Whether can you provide a Mill Test Certification? We can provide a Test certification after production.
Wisdom ss316 arc spray wire Description Ss 316 stainless steel wire specifically designed for arc spraying. It produces dense, Well-bonded coatings with excellent machine ability and wear and corrosion resistance. Ss316 is Widely used for machine element repair, dimensional restoration and wear resistance applications. It has relatively high shrink characteristics and should not be used for coatings over 0.075 inches thick. Typical deposit characteristics: Typical hardness hrb 90-100 Bond strength 6750 psi Deposit rate 10 lbs /hr/100a Deposit efficiency 75% Wire coverage 0.8 oz/ft2 / m Surface texture *variable Machine ability good * depends on air pressure used. Surface preparation: Surface should be clean, white metal, With no oxides (rust), dirt, grease, or oil On the surface to be coated. Note: it is Best not to handle surfaces after Cleaning. Recommended method of preparation Is, to grit blast with 24 mesh aluminum Oxide, rough grind, or rough machine in A lathe. Application: Part restoration Rams Food industry rolls Specification: 316 ss Nominal chemical composistion (wt%): Cr ni mn si fe 17.0 12.0 2.0 1.0 bal Recommended spray parameters: Diameter air pressure voltage amperage standoff 1/16" (1.6mm) *50 - 60 psi *28 - 30 *100 - 200 *4 - 6 in (10 - 15cm) * parameters are typical and may vary depending on equipment used. Contact your equipment manufacture for optimum spray parameters. Standard sizes & packaging: Diameter packaging wire weight 1/16 (1.6mm) d300 spool 15kg (33lb)/spool
Introduction moly wire is a special high grade, tin-based alloy that is manufactured exclusive for thermal spray. moly alloy coating are particularly suitable for high speed and heavy duty bearing surfaces that required coatings of the highest possible quality, especially for critical applications. The coatings are ductile, low in oxides and exhibit a bright,metallic appearance. Packaging & Shipping Packaging:Products are generally supplied in standard cardboard boxes, pallets, wooden boxes. Special packaging requirements can also be accommodated. (also depend on the customers' requirements) For the Thermal spray wires , we pack the wires on spools. Then put spools into cartons, Then put the cartons onto pallet. Shipping: We cooperation with many logistics company,We can provide express, sea transportation, air transportation, and rail way transportation based on customers' requirement. Our Services 1) We can provide a free sample for testing. 2) Customized lable, packing, OEM service 3) Mill test certificate will be provided after production, If it is necessary. 4) Good packing methods to keep goods no damage during delivery 5) We are cooperation with many famous forwarder, will try our best to choose the safty, convenience, quick, and cheap mode of transportation for our customers. Company Information Capacity and Main markets. Our company has more than 20 years of experience in alloy products. The company covers 10000m2.The annual output reaches 5000 tons. The products apply to chemical industry, metallurgy mechanism, glass industry, ceramic industry, home appliance area widely. In china, we mainly do business with army industry, and for worldwide, our selling net-work has expanded to Russia, Ukraine, Germany, Iran, India, Itlay, America etc. Quality Assurance. According to international standard, we introduce new techniques and new processes, so we can keep improving product quality. There are strict processes and quality manages to make sure the products keep updated, and be well received by users. Equipment. Our major equipment, vacuum induction furnace, intermediate frequency induction furnace, electroslag furnace, skanthal A1 bath furnace, wiredrawing units, heat treatment production line and soon. Test equipment: straight reflection spectrograph , spectrometer , chemical analyse lab , machinery properties lab (omnipotent test machine,hardness test machine inside), also metallography laboratory, ultrasonic harmless test,etc.
Introduction Babbitt alloys remain consistent from edge-to-edge and end-to-end through thousands of pounds of ingots and bars, and through thousands of miles of spray wire. Babbitt formulations meet or exceed their engineering standards. With higher productivity, less rework, less cleanup. Fewer defects and higher quality finished products. The coatings are ductile, low in oxides and exhibit a bright, metallic appearance. It can equivalent to: tafa 04t, sulzer metco spraybabbit Surface preparation Surface should be clean, white metal, with no oxides (rust), dirt, grease, or oil on the surface to be coated. Note: it is best not to handle surfaces after cleaning. Recommended method of preparation is, to grit blast with 24 mesh aluminum oxide, rough grind, or rough machine in a lathe. Application Bearing surfaces Product details Chemical composition: Type Chemical composition Sn Sb Cu Other Babbitt wire 90 7~8 3~4 0.25 Specifications Grade Aws Babbitt wire C2.25 / c2.25m w-snsbcu-1 Physical properties Grade Density Melting point Babbitt wire 6.67 g/cm3 354 °c Typical deposit characteristics: Typical hardness Bond strength Deposit rate Deposit efficiency Machilityineab Nil 3000 psi 48 lbs /hr/100a 70% Good Standard sizes & packing: Diameter Packing Wire weight 1/8(3.17mm) D 300 spool 15kg(33 lbs)/spool Other sizes can be produced by customers' requirement.
Quick details Place of origin: hebei, china (mainland) brand name: tongjia model number: tj001 name: beer spear material: ss304/ss316 surface: polished application: beer keg type: a, g, m, h processing: casting certificates: iso capacity: 1.3t/days standard: en, din warranty: one year Packaging & delivery Packaging details: By carton or according to customers' requirement Delivery detail: Shipped in 15 days after payment Quick details Place of origin: hebei, china (mainland) brand name: tongjia model number: tj001 name: beer spear material: ss304/ss316 surface: polished application: beer keg type: a, g, m, h processing: casting certificates: iso capacity: 1.3t/days standard: en, din warranty: one year Packaging & delivery Packaging details: By carton or according to customers' requirement Delivery detail: Shipped in 15 days after payment
roduct Name: Metal Gallium Purity: 99.99% (4N), 99.999% (5N), 99.9999% (6N), 99.99999% (7N), 99.999999% (8N) Melting point: 29.8�ºC Appearance (color/morphology): the liquid is silver-white and the solid is blue-white. CAS: 7440-55-3 Chemical formula: Ga Atomic weight: 69.723 Common uses: Gallium can be used as a raw material for optical glass, vacuum tubes, and semiconductors; it can be measured with a quartz thermometer to measure high temperatures; aluminum can be added to make heat-treated alloys; gallium and gold alloys are used in decoration and dental implants; also used Used as a catalyst for organic synthesis. Product packaging: placed in a sealed plastic bottle, 1kg per bottle, or packaged according to user requirements 4N metal gallium 99.99%: used in photovoltaic substrates, magnetic materials, high temperature thermometers, low melting point alloys, optical glass, etc. 5N metal gallium 99.999%: used for heat conduction medium and high temperature vacuum pump, ultraviolet light bulb, etc. 6N high-purity gallium 99.9999%: used for GaAs, GaP, GaSb, and NB-Fe-B advanced magnetic materials for LED. 7N high-purity gallium 99.99999%: used to make insulating GaAs for IC as substrate. 8N (MBE) ultra-pure gallium 99.999999%: used as a source of molecular beam epitaxy, making GaN blue LEDs and LDs, microwave circuits, and quantum devices. Storage conditions: sealed and stored in a cool and dry place
Mercury , urea, labsa ,sles and chemical products.
Casting, forging, machined parts, ppe kits.
We do custom synthesis of Ag, Au, Os, Pt, Pd, Rh, Ru, Ir, Cs and Rb compounds: Metal and alloy powders Inorganic and chelated chemicals Organometallic compounds For the following industries: Catalysis New energy materials Advanced ceramics 3-D printing materials
Low temperature alloy casting Category Titanium alloy casting Low temperature alloy casting can be used as an important material for the low-temperature structure of hydrogen-oxygen engines. Common grades are TC4 etc. Product Description Low temperature alloy casting can show stronger mechanical properties at low temperature.At present, it has been used in the field of liquid rocket engines, mainly as structural materials such as hydrogen storage tanks for hydrogen-oxygen engines, hydrogen pump impellers, etc., which greatly improves the comprehensive performance of liquid rocket engines. Low-temperature titanium alloys refer to titanium alloys that can work normally under low temperature conditions. They are generally divided into three categories, alpha titanium alloys, beta titanium alloys and alpha-beta titanium alloys. Typical low-temperature titanium alloy products are suitable for working at 253C as a storage container for liquid fuel, and some alloys have good low-temperature plasticity and fracture toughness. The strength of low-temperature titanium alloys can be increased as the temperature decreases, and the toughness remains basically unchanged, making it easy to weld. It has high specific strength, corrosion resistance and low thermal conductivity. It can not only be used as a storage container for low-temperature objects, but also can be used as low-temperature structural parts for the aerospace industry
For sheet metal production
Description: Magnesium and Magnesium Alloy sheets and Plates Alloy No. Products Temper Dimensions (mm) Thickness Width ength M2MAZ31B AZ40MAZ41M ME20MZK61M Hot-Rolled Plates H112 H24 10~70 800~1300 1000~3000 2MAZ31B AZ40MAZ41M ME20MMg99.00 Cold/Warm-Rolled Strips, Sheets and Please H24H18O >1.0~10.0 00~1300 =3500 >0.4~1.0 100~600 =2000 >0.25~0.4 100~300 =2000 0.2 3.0~6.0 Coil Weight:25-28kg
Cast Iron Oval Mooring Sinker for Mooring System
